[U-Boot] [PATCH v4 5/5] am335x_evm: enable networking in SPL
Ilya Yanok
ilya.yanok at cogentembedded.com
Sun Aug 5 23:21:53 CEST 2012
This patch adds support for networking in SPL on TI AM335x based
boards. Vendor Class Identifier used by SPL during BOOTP is
"AM335x U-Boot SPL".
Signed-off-by: Ilya Yanok <ilya.yanok at cogentembedded.com>
---
Changes in v3:
- set Vendor Class Identifier for SPL
Changes in v4:
- SPL_BOARD_INIT is not needed anymore
include/configs/am335x_evm.h | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 69ab076..d36ad8f 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -185,7 +185,7 @@
/* Defines for SPL */
#define CONFIG_SPL
#define CONFIG_SPL_TEXT_BASE 0x402F0400
-#define CONFIG_SPL_MAX_SIZE (46 * 1024)
+#define CONFIG_SPL_MAX_SIZE (101 * 1024)
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
#define CONFIG_SPL_BSS_START_ADDR 0x80000000
@@ -205,6 +205,9 @@
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
#define CONFIG_SPL_YMODEM_SUPPORT
+#define CONFIG_SPL_NET_SUPPORT
+#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"
+#define CONFIG_SPL_ETH_SUPPORT
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
/*
--
1.7.9.5
More information about the U-Boot
mailing list