[U-Boot] [PATCH] da8xx/hawkboard: Add support for ohci host controller

[Tom Rini]

On 08/20/2012 02:05 AM, Sughosh Ganu wrote:
> On Fri Aug 10, 2012 at 02:15:20AM +0530, Sughosh Ganu wrote:
>> Also enable the ohci port on hawkboard. These additions result in an
>> increased u-boot size -- adjust the same accordingly in the board's
>> config.
>>
>> Move the usb header for da8xx platforms under arch-davinci.
>>
>> Signed-off-by: Sughosh Ganu <urwithsughosh at gmail.com>
>> ---
>>  arch/arm/cpu/arm926ejs/davinci/psc.c               |    5 ++
>>  .../arm/include/asm/arch-davinci/da8xx-usb.h       |    7 ++-
>>  arch/arm/include/asm/arch-davinci/hardware.h       |    1 +
>>  board/davinci/da8xxevm/hawkboard.c                 |   41 +++++++++++++++++
>>  drivers/usb/host/Makefile                          |    1 +
>>  drivers/usb/host/ohci-da8xx.c                      |   48 ++++++++++++++++++++
>>  drivers/usb/musb/da8xx.c                           |    3 +-
>>  include/configs/hawkboard.h                        |   14 +++++-
>>  8 files changed, 116 insertions(+), 4 deletions(-)
>>  rename drivers/usb/musb/da8xx.h => arch/arm/include/asm/arch-davinci/da8xx-usb.h (96%)
>>  create mode 100644 drivers/usb/host/ohci-da8xx.c
> 
> Tom, do you have any comments on this patch. If not, can this be
> applied.

I'll give things another quick review this week.  Been focused on the
SPL series I posted last week :)  Thanks!

-- 
Tom