[U-Boot] [PATCH] km/arm: set SPI NOR Flash default parameters

[Valentin Longchamp]

These parameters are used by the the sf probe command that are used by
our update script and they therefore need to be set for all of our
boards.

The timing is the same as for the ENV SPI NOR Flash (since it's the
same physical device) and takes the boco2 delay on the bus into account.

Signed-off-by: Valentin Longchamp <valentin.longchamp at keymile.com>
cc: Holger Brunck <holger.brunck at keymile.com>
---
 include/configs/km/km_arm.h |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h
index 2d573e4..055d946 100644
--- a/include/configs/km/km_arm.h
+++ b/include/configs/km/km_arm.h
@@ -57,6 +57,10 @@
 #define CONFIG_CMD_SF
 #define CONFIG_SOFT_I2C		/* I2C bit-banged	*/
 
+/* SPI NOR Flash default params, used by sf commands */
+#define CONFIG_SF_DEFAULT_SPEED		8100000
+#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
+
 #if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
 #define CONFIG_ENV_SPI_BUS		0
 #define CONFIG_ENV_SPI_CS		0
-- 
1.7.1