[U-Boot] [PATCH v2 1/5] pci: fix errant data types and corresponding access functions
Andrew Sharp
andywyse6 at gmail.com
Thu Aug 30 02:16:28 CEST 2012
In a couple of places, unsigned int and pci_config_*_dword were being
used when u16 and _word should be used. Unsigned int was also being
used in a couple of places that should be pci_addr_t.
Signed-off-by: Andrew Sharp <andywyse6 at gmail.com>
---
drivers/pci/pci.c | 7 ++++---
drivers/pci/pci_auto.c | 15 ++++++++-------
2 files changed, 12 insertions(+), 10 deletions(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 398542b..cd78312 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -118,11 +118,11 @@ PCI_WRITE_VIA_DWORD_OP(word, u16, 0x02, 0x0000ffff)
void *pci_map_bar(pci_dev_t pdev, int bar, int flags)
{
pci_addr_t pci_bus_addr;
- u32 bar_response;
+ pci_addr_t bar_response;
/* read BAR address */
pci_read_config_dword(pdev, bar, &bar_response);
- pci_bus_addr = (pci_addr_t)(bar_response & ~0xf);
+ pci_bus_addr = bar_response & ~0xf;
/*
* Pass "0" as the length argument to pci_bus_to_virt. The arg
@@ -385,7 +385,8 @@ int pci_hose_config_device(struct pci_controller *hose,
pci_addr_t mem,
unsigned long command)
{
- unsigned int bar_response, old_command;
+ pci_addr_t bar_response;
+ unsigned int old_command;
pci_addr_t bar_value;
pci_size_t bar_size;
unsigned char pin;
diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c
index 87ee2c2..2338706 100644
--- a/drivers/pci/pci_auto.c
+++ b/drivers/pci/pci_auto.c
@@ -88,15 +88,15 @@ void pciauto_setup_device(struct pci_controller *hose,
struct pci_region *prefetch,
struct pci_region *io)
{
- unsigned int bar_response;
+ pci_addr_t bar_response;
pci_addr_t bar_value;
pci_size_t bar_size;
- unsigned int cmdstat = 0;
+ u16 cmdstat = 0;
struct pci_region *bar_res;
int bar, bar_nr = 0;
int found_mem64 = 0;
- pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);
+ pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat);
cmdstat = (cmdstat & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) | PCI_COMMAND_MASTER;
for (bar = PCI_BASE_ADDRESS_0; bar < PCI_BASE_ADDRESS_0 + (bars_num*4); bar += 4) {
@@ -167,7 +167,7 @@ void pciauto_setup_device(struct pci_controller *hose,
bar_nr++;
}
- pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);
+ pci_hose_write_config_word(hose, dev, PCI_COMMAND, cmdstat);
pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE,
CONFIG_SYS_PCI_CACHE_LINE_SIZE);
pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
@@ -179,9 +179,9 @@ void pciauto_prescan_setup_bridge(struct pci_controller *hose,
struct pci_region *pci_mem = hose->pci_mem;
struct pci_region *pci_prefetch = hose->pci_prefetch;
struct pci_region *pci_io = hose->pci_io;
- unsigned int cmdstat;
+ u16 cmdstat;
- pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);
+ pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat);
/* Configure bus number registers */
pci_hose_write_config_byte(hose, dev, PCI_PRIMARY_BUS,
@@ -229,7 +229,8 @@ void pciauto_prescan_setup_bridge(struct pci_controller *hose,
}
/* Enable memory and I/O accesses, enable bus master */
- pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat | PCI_COMMAND_MASTER);
+ pci_hose_write_config_word(hose, dev, PCI_COMMAND,
+ cmdstat | PCI_COMMAND_MASTER);
}
void pciauto_postscan_setup_bridge(struct pci_controller *hose,
--
1.7.1
More information about the U-Boot
mailing list