[U-Boot] [PATCH 2/2] MX28: Shuffle around the power management code

[Marek Vasut]

Move some function calls to a more appropriate place, so they're
called only when needed.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Fabio Estevam <fabio.estevam at freescale.com>
---
 arch/arm/cpu/arm926ejs/mx28/spl_power_init.c |    9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/arch/arm/cpu/arm926ejs/mx28/spl_power_init.c b/arch/arm/cpu/arm926ejs/mx28/spl_power_init.c
index 4b09b0c..e06e6d6 100644
--- a/arch/arm/cpu/arm926ejs/mx28/spl_power_init.c
+++ b/arch/arm/cpu/arm926ejs/mx28/spl_power_init.c
@@ -657,17 +657,14 @@ void mx28_power_configure_power_source(void)
 
 	mx28_src_power_init();
 
-	batt_ready = mx28_is_batt_ready();
-
 	if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
-		batt_good = mx28_is_batt_good();
+		batt_ready = mx28_is_batt_ready();
 		if (batt_ready) {
 			/* 5V source detected, good battery detected. */
 			mx28_batt_boot();
 		} else {
-			if (batt_good) {
-				/* 5V source detected, low battery detceted. */
-			} else {
+			batt_good = mx28_is_batt_good();
+			if (!batt_good) {
 				/* 5V source detected, bad battery detected. */
 				writel(LRADC_CONVERSION_AUTOMATIC,
 					&lradc_regs->hw_lradc_conversion_clr);
-- 
1.7.10.4