[U-Boot] [PATCH 3/4] efikamx: update to Efika MX Smarttop and Smartbook boards

Benoît Thébaudeau benoit.thebaudeau at advansee.com
Fri Aug 17 21:29:36 CEST 2012


Dear Matt Sealey,

Benoît Thébaudeau
Application Engineer
benoit.thebaudeau at advansee.com
+33 2 40 50 21 73
ADVANSEE SARL
9, rue Alfred Kastler
CS 30750
44307 Nantes CEDEX 3
France

----- Original Message -----
> From: "Matt Sealey" <matt at genesi-usa.com>
> To: "U-Boot ML" <u-boot at lists.denx.de>
> Cc: "Steev Klimaszewski" <steev at genesi-usa.com>
> Sent: Friday, August 17, 2012 8:19:21 PM
> Subject: [U-Boot] [PATCH 3/4] efikamx: update to Efika MX Smarttop and	Smartbook boards
> 
> Change summary:
> 
> * Use iomux-mx51.h include to simplify board configuration.
> * Remove LED toggle function as it had no real users.
> * Red LED is now on for pre-reloc, Blue LED for "in U-Boot"
> * Function renames for readability.
> * Some board identification string changes
> * Reduce CPU core voltage to 1.1V (per TO3 spec)
> * Implicitly remove support for TO2 boards

These are many unrelated changes that could be split.

> Signed-off-by: Matt Sealey <matt at genesi-usa.com>
> ---
>  board/genesi/mx51_efikamx/efikamx.c |  611
>  +++++++++++++----------------------
>  1 file changed, 230 insertions(+), 381 deletions(-)
> 
> diff --git a/board/genesi/mx51_efikamx/efikamx.c
> b/board/genesi/mx51_efikamx/efikamx.c
> index 12371c9..16e877f 100644
> --- a/board/genesi/mx51_efikamx/efikamx.c
> +++ b/board/genesi/mx51_efikamx/efikamx.c
> @@ -1,7 +1,7 @@
>  /*
> + * Copyright (C) 2009 Freescale Semiconductor, Inc.
>   * Copyright (C) 2010 Marek Vasut <marek.vasut at gmail.com>
> - *
> - * (C) Copyright 2009 Freescale Semiconductor, Inc.
> + * Copyright (C) 2009-2012 Genesi USA, Inc.
>   *
>   * See file CREDITS for list of people who contributed to this
>   * project.
> @@ -24,9 +24,7 @@
>  
>  #include <common.h>
>  #include <asm/io.h>
> -#include <asm/arch/imx-regs.h>
> -#include <asm/arch/mx5x_pins.h>
> -#include <asm/arch/iomux.h>
> +#include <asm/arch/iomux-mx51.h>
>  #include <asm/gpio.h>
>  #include <asm/errno.h>
>  #include <asm/arch/sys_proto.h>
> @@ -48,16 +46,12 @@ DECLARE_GLOBAL_DATA_PTR;
>  #endif
>  
>  /*
> - * Shared variables / local defines
> + * Board revisions
> + *
> + * Note that we get these revisions here for convenience, but we
> only set
> + * up for the production model Smarttop (1.3) and Smartbook (2.0).
> + *
>   */
> -/* LED */
> -#define	EFIKAMX_LED_BLUE	0x1
> -#define	EFIKAMX_LED_GREEN	0x2
> -#define	EFIKAMX_LED_RED		0x4
> -
> -void efikamx_toggle_led(uint32_t mask);
> -
> -/* Board revisions */
>  #define	EFIKAMX_BOARD_REV_11	0x1
>  #define	EFIKAMX_BOARD_REV_12	0x2
>  #define	EFIKAMX_BOARD_REV_13	0x3
> @@ -69,66 +63,67 @@ void efikamx_toggle_led(uint32_t mask);
>  /*
>   * Board identification
>   */
> -u32 get_efikamx_rev(void)
> +static u32 get_mx_rev(void)
>  {
>  	u32 rev = 0;
>  	/*
>  	 * Retrieve board ID:
> -	 *      rev1.1: 1,1,1
> -	 *      rev1.2: 1,1,0
> -	 *      rev1.3: 1,0,1
> -	 *      rev1.4: 1,0,0
> +	 *
> +	 *  gpio: 16 17 11
> +	 *  ==============
> +	 *	r1.1:  1+ 1  1
> +	 *	r1.2:  1  1  0
> +	 *	r1.3:  1  0  1
> +	 *	r1.4:  1  0  0
> +	 *
> +	 * + note: r1.1 does not strap this pin properly so it needs to
> +	 *         be hacked or ignored.
>  	 */
> -	mxc_request_iomux(MX51_PIN_NANDF_CS0, IOMUX_CONFIG_GPIO);
> -	/* set to 1 in order to get correct value on board rev1.1 */
> -	gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0), 1);
> +
> +	/* set to 1 in order to get correct value on board rev 1.1 */
> +	gpio_direction_output(GPIO_NUMBER(3, 16), 1);
> +	gpio_direction_input(GPIO_NUMBER(3, 11));
> +	gpio_direction_input(GPIO_NUMBER(3, 16));
> +	gpio_direction_input(GPIO_NUMBER(3, 17));
>  
> -	mxc_request_iomux(MX51_PIN_NANDF_CS0, IOMUX_CONFIG_GPIO);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_CS0, PAD_CTL_100K_PU);
> -	gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0));
> -	rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0))) << 0;
> -
> -	mxc_request_iomux(MX51_PIN_NANDF_CS1, IOMUX_CONFIG_GPIO);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_CS1, PAD_CTL_100K_PU);
> -	gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS1));
> -	rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS1))) << 1;
> -
> -	mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_GPIO);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, PAD_CTL_100K_PU);
> -	gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_NANDF_RB3));
> -	rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_NANDF_RB3))) << 2;
> +	rev |= (!!gpio_get_value(GPIO_NUMBER(3, 16))) << 0;
> +	rev |= (!!gpio_get_value(GPIO_NUMBER(3, 17))) << 1;
> +	rev |= (!!gpio_get_value(GPIO_NUMBER(3, 11))) << 2;
>  
>  	return (~rev & 0x7) + 1;
>  }
>  
> -inline u32 get_efikasb_rev(void)
> +static iomux_v3_cfg_t efikasb_revision_pads[] = {
> +	MX51_PAD_EIM_CS3__GPIO2_28,
> +	MX51_PAD_EIM_CS4__GPIO2_29,
> +};
> +
> +static inline u32 get_sb_rev(void)
>  {
>  	u32 rev = 0;
>  
> -	mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_GPIO);
> -	mxc_iomux_set_pad(MX51_PIN_EIM_CS3, PAD_CTL_100K_PU);
> -	gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_EIM_CS3));
> -	rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_EIM_CS3))) << 0;
> -
> -	mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_GPIO);
> -	mxc_iomux_set_pad(MX51_PIN_EIM_CS4, PAD_CTL_100K_PU);
> -	gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_EIM_CS4));
> -	rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_EIM_CS4))) << 1;
> +	imx_iomux_v3_setup_multiple_pads(efikasb_revision_pads,
> ARRAY_SIZE(efikasb_revision_pads));
> +	gpio_direction_input(GPIO_NUMBER(2, 28));
> +	gpio_direction_input(GPIO_NUMBER(2, 29));
> +
> +	rev |= (!!gpio_get_value(GPIO_NUMBER(2, 28))) << 0;
> +	rev |= (!!gpio_get_value(GPIO_NUMBER(2, 29))) << 1;
>  
>  	return rev;
>  }
>  
> -inline uint32_t get_efika_rev(void)
> +inline uint32_t get_efikamx_rev(void)
>  {
> -	if (machine_is_efikamx())
> -		return get_efikamx_rev();
> -	else
> -		return get_efikasb_rev();
> +	if (machine_is_efikamx()) {
> +		return get_mx_rev();
> +	} else if (machine_is_efikasb()) {
> +		return get_sb_rev();
> +	}
>  }
>  
>  u32 get_board_rev(void)
>  {
> -	return get_cpu_rev() | (get_efika_rev() << 8);
> +	return get_cpu_rev() | (get_efikamx_rev() << 8);
>  }
>  
>  /*
> @@ -137,66 +132,35 @@ u32 get_board_rev(void)
>  int dram_init(void)
>  {
>  	/* dram_init must store complete ramsize in gd->ram_size */
> -	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
> -				PHYS_SDRAM_1_SIZE);
> +	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
> PHYS_SDRAM_1_SIZE);
>  	return 0;
>  }
>  
>  /*
>   * UART configuration
>   */
> -static void setup_iomux_uart(void)
> -{
> -	unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
> -			PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH;
> -
> -	mxc_request_iomux(MX51_PIN_UART1_RXD, IOMUX_CONFIG_ALT0);
> -	mxc_iomux_set_pad(MX51_PIN_UART1_RXD, pad | PAD_CTL_SRE_FAST);
> -	mxc_request_iomux(MX51_PIN_UART1_TXD, IOMUX_CONFIG_ALT0);
> -	mxc_iomux_set_pad(MX51_PIN_UART1_TXD, pad | PAD_CTL_SRE_FAST);
> -	mxc_request_iomux(MX51_PIN_UART1_RTS, IOMUX_CONFIG_ALT0);
> -	mxc_iomux_set_pad(MX51_PIN_UART1_RTS, pad);
> -	mxc_request_iomux(MX51_PIN_UART1_CTS, IOMUX_CONFIG_ALT0);
> -	mxc_iomux_set_pad(MX51_PIN_UART1_CTS, pad);
> -}
> +static iomux_v3_cfg_t efikamx_uart_pads[] = {
> +	MX51_PAD_UART1_RXD__UART1_RXD,
> +	MX51_PAD_UART1_TXD__UART1_TXD,
> +	MX51_PAD_UART1_RTS__UART1_RTS,
> +	MX51_PAD_UART1_CTS__UART1_CTS,
> +};
>  
>  /*
>   * SPI configuration
>   */
> -#ifdef CONFIG_MXC_SPI
> -static void setup_iomux_spi(void)
> -{
> -	/* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */
> -	mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0);
> -	mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI,
> -		PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
> -
> -	/* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1.
> */
> -	mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0);
> -	mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO,
> -		PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
> -
> -	/* Configure SS0 as a GPIO */
> -	mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_GPIO);
> -	gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS0), 0);
> -
> -	/* Configure SS1 as a GPIO */
> -	mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_GPIO);
> -	gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS1), 1);
> -
> -	/* 000: Select mux mode: ALT0 mux port: SS2 of instance: ecspi1. */
> -	mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT0);
> -	mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY,
> -		PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
> -
> -	/* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1.
> */
> -	mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0);
> -	mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK,
> -		PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
> -}
> -#else
> -static inline void setup_iomux_spi(void) { }
> -#endif
> +static iomux_v3_cfg_t efikamx_spi_pads[]= {
> +	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
> +	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
> +	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
> +	MX51_PAD_CSPI1_SS0__GPIO4_24,
> +	MX51_PAD_CSPI1_SS1__GPIO4_25,
> +	MX51_PAD_GPIO1_6__GPIO1_6,
> +};

Why don't you merge all these pad settings to a single board pad array, with a
single call to imx_iomux_v3_setup_multiple_pads()?

> +
> +#define EFIKAMX_SPI_SS0		GPIO_NUMBER(4, 24)
> +#define EFIKAMX_SPI_SS1		GPIO_NUMBER(4, 25)
> +#define EFIKAMX_PMIC_IRQ	GPIO_NUMBER(1, 6)
>  
>  /*
>   * PMIC configuration
> @@ -226,7 +190,7 @@ static void power_init(void)
>  
>  	/* Set core voltage to 1.1V */
>  	pmic_reg_read(p, REG_SW_0, &val);
> -	val = (val & ~SWx_VOLT_MASK) | SWx_1_200V;
> +	val = (val & ~SWx_VOLT_MASK) | SWx_1_100V;
>  	pmic_reg_write(p, REG_SW_0, val);
>  
>  	/* Setup VCC (SW2) to 1.25 */
> @@ -301,29 +265,64 @@ static inline void power_init(void) { }
>   * MMC configuration
>   */
>  #ifdef CONFIG_FSL_ESDHC
> +
>  struct fsl_esdhc_cfg esdhc_cfg[2] = {
>  	{MMC_SDHC1_BASE_ADDR, 1},
>  	{MMC_SDHC2_BASE_ADDR, 1},
>  };
>  
> -static inline uint32_t efika_mmc_cd(void)
> +static iomux_v3_cfg_t efikamx_sdhc1_pads[] = {
> +	MX51_PAD_SD1_CMD__SD1_CMD,
> +	MX51_PAD_SD1_CLK__SD1_CLK,
> +	MX51_PAD_SD1_DATA0__SD1_DATA0,
> +	MX51_PAD_SD1_DATA1__SD1_DATA1,
> +	MX51_PAD_SD1_DATA2__SD1_DATA2,
> +	MX51_PAD_SD1_DATA3__SD1_DATA3,
> +	MX51_PAD_GPIO1_1__SD1_WP,
> +};
> +
> +#define EFIKAMX_SDHC1_WP	GPIO_NUMBER(1,1)
> +
> +static iomux_v3_cfg_t efikamx_sdhc1_cd_pads[] = {
> +	MX51_PAD_GPIO1_0__SD1_CD,
> +	MX51_PAD_EIM_CS2__SD1_CD,
> +};
> +
> +#define EFIKAMX_SDHC1_CD	GPIO_NUMBER(1,0)
> +#define EFIKASB_SDHC1_CD	GPIO_NUMBER(2,27)
> +
> +static iomux_v3_cfg_t efikasb_sdhc2_pads[] = {
> +	MX51_PAD_SD2_CMD__SD2_CMD,
> +	MX51_PAD_SD2_CLK__SD2_CLK,
> +	MX51_PAD_SD2_DATA0__SD2_DATA0,
> +	MX51_PAD_SD2_DATA1__SD2_DATA1,
> +	MX51_PAD_SD2_DATA2__SD2_DATA2,
> +	MX51_PAD_SD2_DATA3__SD2_DATA3,
> +	MX51_PAD_GPIO1_7__SD2_WP,
> +	MX51_PAD_GPIO1_8__SD2_CD,
> +};
> +
> +#define EFIKASB_SDHC2_CD	GPIO_NUMBER(1,8)
> +#define EFIKASB_SDHC2_WP	GPIO_NUMBER(1,7)
> +
> +static inline uint32_t efikamx_mmc_getcd(u32 base)
>  {
> -	if (machine_is_efikamx())
> -		return MX51_PIN_GPIO1_0;
> -	else
> -		return MX51_PIN_EIM_CS2;
> +	if (base == MMC_SDHC1_BASE_ADDR) {
> +		if (machine_is_efikamx()) {
> +			return EFIKAMX_SDHC1_CD;
> +		} else {
> +			return EFIKASB_SDHC1_CD;
> +		}
> +	} else {
> +		return EFIKASB_SDHC2_CD;
> +	}
>  }
>  
>  int board_mmc_getcd(struct mmc *mmc)
>  {
>  	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
> -	uint32_t cd = efika_mmc_cd();
> -	int ret;
> -
> -	if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
> -		ret = !gpio_get_value(IOMUX_TO_GPIO(cd));
> -	else
> -		ret = !gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8));
> +	uint32_t cd = efikamx_mmc_getcd(cfg->esdhc_base);
> +	int ret = !gpio_get_value(cd);
>  
>  	return ret;
>  }
> @@ -331,214 +330,73 @@ int board_mmc_getcd(struct mmc *mmc)
>  int board_mmc_init(bd_t *bis)
>  {
>  	int ret;
> -	uint32_t cd = efika_mmc_cd();
> -
> -	/* SDHC1 is used on all revisions, setup control pins first */
> -	mxc_request_iomux(cd,
> -		IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
> -	mxc_iomux_set_pad(cd,
> -		PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE |
> -		PAD_CTL_PUE_KEEPER | PAD_CTL_100K_PU |
> -		PAD_CTL_ODE_OPENDRAIN_NONE |
> -		PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
> -	mxc_request_iomux(MX51_PIN_GPIO1_1,
> -		IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
> -	mxc_iomux_set_pad(MX51_PIN_GPIO1_1,
> -		PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE |
> -		PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_NONE |
> -		PAD_CTL_SRE_FAST);
> -
> -	gpio_direction_input(IOMUX_TO_GPIO(cd));
> -	gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_1));
> -
> -	/* Internal SDHC1 IOMUX + SDHC2 IOMUX on old boards */
> -	if (machine_is_efikasb() || (machine_is_efikamx() &&
> -		(get_efika_rev() < EFIKAMX_BOARD_REV_12))) {
> -		/* SDHC1 IOMUX */
> -		mxc_request_iomux(MX51_PIN_SD1_CMD,
> -			IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
> -		mxc_iomux_set_pad(MX51_PIN_SD1_CMD,
> -			PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE |
> -			PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST);
> -
> -		mxc_request_iomux(MX51_PIN_SD1_CLK,
> -			IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
> -		mxc_iomux_set_pad(MX51_PIN_SD1_CLK,
> -			PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE |
> -			PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST);
> -
> -		mxc_request_iomux(MX51_PIN_SD1_DATA0, IOMUX_CONFIG_ALT0);
> -		mxc_iomux_set_pad(MX51_PIN_SD1_DATA0,
> -			PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE |
> -			PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST);
> -
> -		mxc_request_iomux(MX51_PIN_SD1_DATA1, IOMUX_CONFIG_ALT0);
> -		mxc_iomux_set_pad(MX51_PIN_SD1_DATA1,
> -			PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE |
> -			PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST);
> -
> -		mxc_request_iomux(MX51_PIN_SD1_DATA2, IOMUX_CONFIG_ALT0);
> -		mxc_iomux_set_pad(MX51_PIN_SD1_DATA2,
> -			PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE |
> -			PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST);
> -
> -		mxc_request_iomux(MX51_PIN_SD1_DATA3, IOMUX_CONFIG_ALT0);
> -		mxc_iomux_set_pad(MX51_PIN_SD1_DATA3,
> -			PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE |
> -			PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST);
> -
> -		/* SDHC2 IOMUX */
> -		mxc_request_iomux(MX51_PIN_SD2_CMD,
> -			IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
> -		mxc_iomux_set_pad(MX51_PIN_SD2_CMD,
> -			PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
> -
> -		mxc_request_iomux(MX51_PIN_SD2_CLK,
> -			IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
> -		mxc_iomux_set_pad(MX51_PIN_SD2_CLK,
> -			PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
> -
> -		mxc_request_iomux(MX51_PIN_SD2_DATA0, IOMUX_CONFIG_ALT0);
> -		mxc_iomux_set_pad(MX51_PIN_SD2_DATA0,
> -			PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
> -
> -		mxc_request_iomux(MX51_PIN_SD2_DATA1, IOMUX_CONFIG_ALT0);
> -		mxc_iomux_set_pad(MX51_PIN_SD2_DATA1,
> -			PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
> -
> -		mxc_request_iomux(MX51_PIN_SD2_DATA2, IOMUX_CONFIG_ALT0);
> -		mxc_iomux_set_pad(MX51_PIN_SD2_DATA2,
> -			PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
> -
> -		mxc_request_iomux(MX51_PIN_SD2_DATA3, IOMUX_CONFIG_ALT0);
> -		mxc_iomux_set_pad(MX51_PIN_SD2_DATA3,
> -			PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
> -
> -		/* SDHC2 Control lines IOMUX */
> -		mxc_request_iomux(MX51_PIN_GPIO1_7,
> -			IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
> -		mxc_iomux_set_pad(MX51_PIN_GPIO1_7,
> -			PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE |
> -			PAD_CTL_PUE_KEEPER | PAD_CTL_100K_PU |
> -			PAD_CTL_ODE_OPENDRAIN_NONE |
> -			PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
> -		mxc_request_iomux(MX51_PIN_GPIO1_8,
> -			IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
> -		mxc_iomux_set_pad(MX51_PIN_GPIO1_8,
> -			PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE |
> -			PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_NONE |
> -			PAD_CTL_SRE_FAST);
> -
> -		gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8));
> -		gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_7));
> -
> -		ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
> -		if (!ret)
> -			ret = fsl_esdhc_initialize(bis, &esdhc_cfg[1]);
> -	} else {	/* New boards use only SDHC1 */
> -		/* SDHC1 IOMUX */
> -		mxc_request_iomux(MX51_PIN_SD1_CMD,
> -			IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
> -		mxc_iomux_set_pad(MX51_PIN_SD1_CMD,
> -			PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
> -
> -		mxc_request_iomux(MX51_PIN_SD1_CLK,
> -			IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
> -		mxc_iomux_set_pad(MX51_PIN_SD1_CLK,
> -			PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
> -
> -		mxc_request_iomux(MX51_PIN_SD1_DATA0, IOMUX_CONFIG_ALT0);
> -		mxc_iomux_set_pad(MX51_PIN_SD1_DATA0,
> -			PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
> -
> -		mxc_request_iomux(MX51_PIN_SD1_DATA1, IOMUX_CONFIG_ALT0);
> -		mxc_iomux_set_pad(MX51_PIN_SD1_DATA1,
> -			PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
> -
> -		mxc_request_iomux(MX51_PIN_SD1_DATA2, IOMUX_CONFIG_ALT0);
> -		mxc_iomux_set_pad(MX51_PIN_SD1_DATA2,
> -			PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
> -
> -		mxc_request_iomux(MX51_PIN_SD1_DATA3, IOMUX_CONFIG_ALT0);
> -		mxc_iomux_set_pad(MX51_PIN_SD1_DATA3,
> -			PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST);
> -
> -		ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
> +
> +	/*
> +	 * All Efika MX boards use eSDHC1 with a common write-protect GPIO
> +	 */
> +	imx_iomux_v3_setup_multiple_pads(efikamx_sdhc1_pads,
> ARRAY_SIZE(efikamx_sdhc1_pads));
> +	gpio_direction_input(EFIKAMX_SDHC1_WP);
> +
> +	/*
> +	 * Smartbook and Smarttop differ on the location of eSDHC1
> carrier-detect GPIO
> +	 */
> +	if (machine_is_efikamx()) {
> +		imx_iomux_v3_setup_pad(efikamx_sdhc1_cd_pads[0]);
> +		gpio_direction_input(EFIKAMX_SDHC1_CD);
> +	} else if (machine_is_efikasb()) {
> +		imx_iomux_v3_setup_pad(efikamx_sdhc1_cd_pads[1]);
> +		gpio_direction_input(EFIKASB_SDHC1_CD);
>  	}
> +
> +	ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
> +
> +	if (machine_is_efikasb()) {
>  
> +		imx_iomux_v3_setup_multiple_pads(efikasb_sdhc2_pads,
> ARRAY_SIZE(efikasb_sdhc2_pads));
> +		gpio_direction_input(EFIKASB_SDHC2_CD);
> +		gpio_direction_input(EFIKASB_SDHC2_WP);
> +		if (!ret)
> +			ret = fsl_esdhc_initialize(bis, &esdhc_cfg[1]);
> +	}
> +
>  	return ret;
>  }
>  #endif
>  
>  /*
> - * ATA
> + * PATA
>   */
> -#ifdef	CONFIG_MX51_PATA
> -#define	ATA_PAD_CONFIG	(PAD_CTL_DRV_HIGH | PAD_CTL_DRV_VOT_HIGH)
> -void setup_iomux_ata(void)
> -{
> -	mxc_request_iomux(MX51_PIN_NANDF_ALE, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_ALE, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_NANDF_RE_B, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_RE_B, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_NANDF_WE_B, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_WE_B, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_NANDF_CLE, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_CLE, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_NANDF_RB0, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_RB0, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_NANDF_WP_B, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_WP_B, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_GPIO_NAND, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_GPIO_NAND, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_NANDF_RB1, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_RB1, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_NANDF_D0, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_D0, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_NANDF_D1, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_D1, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_NANDF_D2, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_D2, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_NANDF_D3, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_D3, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_NANDF_D4, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_D4, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_NANDF_D5, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_D5, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_NANDF_D6, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_D6, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_NANDF_D7, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_D7, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_D8, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_D9, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_NANDF_D10, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_D10, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_D11, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_NANDF_D12, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_D12, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_NANDF_D13, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_D13, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_NANDF_D14, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_D14, ATA_PAD_CONFIG);
> -	mxc_request_iomux(MX51_PIN_NANDF_D15, IOMUX_CONFIG_ALT1);
> -	mxc_iomux_set_pad(MX51_PIN_NANDF_D15, ATA_PAD_CONFIG);
> -}
> -#else
> -static inline void setup_iomux_ata(void) { }
> -#endif
> +static iomux_v3_cfg_t efikamx_pata_pads[] = {
> +	MX51_PAD_NANDF_WE_B__PATA_DIOW,
> +	MX51_PAD_NANDF_RE_B__PATA_DIOR,
> +	MX51_PAD_NANDF_ALE__PATA_BUFFER_EN,
> +	MX51_PAD_NANDF_CLE__PATA_RESET_B,
> +	MX51_PAD_NANDF_WP_B__PATA_DMACK,
> +	MX51_PAD_NANDF_RB0__PATA_DMARQ,
> +	MX51_PAD_NANDF_RB1__PATA_IORDY,
> +	MX51_PAD_GPIO_NAND__PATA_INTRQ,
> +	MX51_PAD_NANDF_CS2__PATA_CS_0,
> +	MX51_PAD_NANDF_CS3__PATA_CS_1,
> +	MX51_PAD_NANDF_CS4__PATA_DA_0,
> +	MX51_PAD_NANDF_CS5__PATA_DA_1,
> +	MX51_PAD_NANDF_CS6__PATA_DA_2,
> +	MX51_PAD_NANDF_D15__PATA_DATA15,
> +	MX51_PAD_NANDF_D14__PATA_DATA14,
> +	MX51_PAD_NANDF_D13__PATA_DATA13,
> +	MX51_PAD_NANDF_D12__PATA_DATA12,
> +	MX51_PAD_NANDF_D11__PATA_DATA11,
> +	MX51_PAD_NANDF_D10__PATA_DATA10,
> +	MX51_PAD_NANDF_D9__PATA_DATA9,
> +	MX51_PAD_NANDF_D8__PATA_DATA8,
> +	MX51_PAD_NANDF_D7__PATA_DATA7,
> +	MX51_PAD_NANDF_D6__PATA_DATA6,
> +	MX51_PAD_NANDF_D5__PATA_DATA5,
> +	MX51_PAD_NANDF_D4__PATA_DATA4,
> +	MX51_PAD_NANDF_D3__PATA_DATA3,
> +	MX51_PAD_NANDF_D2__PATA_DATA2,
> +	MX51_PAD_NANDF_D1__PATA_DATA1,
> +	MX51_PAD_NANDF_D0__PATA_DATA0,
> +};
>  
>  /*
>   * EHCI USB
> @@ -551,57 +409,55 @@ static inline void setup_iomux_usb(void) { }
>  
>  /*
>   * LED configuration
> + *
> + * Smarttop LED pad config is done in the DCD
> + *
>   */
> -void setup_iomux_led(void)
> -{
> -	if (machine_is_efikamx()) {
> -		/* Blue LED */
> -		mxc_request_iomux(MX51_PIN_CSI1_D9, IOMUX_CONFIG_ALT3);
> -		gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9), 0);
> -
> -		/* Green LED */
> -		mxc_request_iomux(MX51_PIN_CSI1_VSYNC, IOMUX_CONFIG_ALT3);
> -		gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC), 0);
> +#define EFIKAMX_LED_BLUE	GPIO_NUMBER(3, 13)
> +#define EFIKAMX_LED_GREEN	GPIO_NUMBER(3, 14)
> +#define EFIKAMX_LED_RED		GPIO_NUMBER(3, 15)
>  
> -		/* Red LED */
> -		mxc_request_iomux(MX51_PIN_CSI1_HSYNC, IOMUX_CONFIG_ALT3);
> -		gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC), 0);
> -	} else {
> -		/* CAPS-LOCK LED */
> -		mxc_request_iomux(MX51_PIN_EIM_CS0, IOMUX_CONFIG_GPIO);
> -		gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_CS0), 0);
> -
> -		/* ALARM-LED LED */
> -		mxc_request_iomux(MX51_PIN_GPIO1_3, IOMUX_CONFIG_GPIO);
> -		gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_GPIO1_3), 0);
> -	}
> -}
> +static iomux_v3_cfg_t efikasb_led_pads[] = {
> +	MX51_PAD_GPIO1_3__GPIO1_3,
> +	MX51_PAD_EIM_CS0__GPIO2_25,
> +};
>  
> -void efikamx_toggle_led(uint32_t mask)
> -{
> -	if (machine_is_efikamx()) {
> -		gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9),
> -				mask & EFIKAMX_LED_BLUE);
> -		gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC),
> -				mask & EFIKAMX_LED_GREEN);
> -		gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC),
> -				mask & EFIKAMX_LED_RED);
> -	} else {
> -		gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_CS0),
> -				mask & EFIKAMX_LED_BLUE);
> -		gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_3),
> -				!(mask & EFIKAMX_LED_GREEN));
> -	}
> -}
> +#define EFIKASB_CAPSLOCK_LED	GPIO_NUMBER(2, 25)
> +#define EFIKASB_MESSAGE_LED		GPIO_NUMBER(1, 3) /* Note: active low
> */
>  
>  /*
>   * Board initialization
>   */
>  int board_early_init_f(void)
>  {
> -	setup_iomux_uart();
> -	setup_iomux_spi();
> -	setup_iomux_led();
> +	if (machine_is_efikasb()) {
> +		imx_iomux_v3_setup_multiple_pads(efikasb_led_pads,
> ARRAY_SIZE(efikasb_led_pads));
> +		gpio_direction_output(EFIKASB_CAPSLOCK_LED, 0);
> +		gpio_direction_output(EFIKASB_MESSAGE_LED, 1);
> +	} else if (machine_is_efikamx()) {
> +		/*
> +		 * Set up GPIO directions for LEDs.
> +		 * IOMUX has been done in the DCD already.
> +		 * Turn the red LED on for pre-relocation code.
> +		 */
> +		gpio_direction_output(EFIKAMX_LED_BLUE, 0);
> +		gpio_direction_output(EFIKAMX_LED_GREEN, 0);
> +		gpio_direction_output(EFIKAMX_LED_RED, 1);
> +	}
> +
> +	/*
> +	 * Both these pad configurations for UART and SPI are kind of
> redundant
> +	 * since they are the Power-On Defaults for the i.MX51. But, it
> seems we
> +	 * should make absolutely sure that they are set up correctly.
> +	 */
> +	imx_iomux_v3_setup_multiple_pads(efikamx_uart_pads,
> ARRAY_SIZE(efikamx_uart_pads));
> +	imx_iomux_v3_setup_multiple_pads(efikamx_spi_pads,
> ARRAY_SIZE(efikamx_spi_pads));
> +
> +	/* not technically required for U-Boot operation but set it up
> anyway. */
> +	gpio_direction_input(EFIKAMX_PMIC_IRQ);
> +	/* Deselect both CS for now.. any other way and NOR doesn't probe
> properly. */
> +	gpio_direction_output(EFIKAMX_SPI_SS0, 0);
> +	gpio_direction_output(EFIKAMX_SPI_SS1, 1);
>  
>  	return 0;
>  }
> @@ -609,49 +465,42 @@ int board_early_init_f(void)
>  int board_init(void)
>  {
>  	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
> -
> +
>  	return 0;
>  }
>  
>  int board_late_init(void)
>  {
> -	setup_iomux_spi();
> -
> +	if (machine_is_efikamx()) {
> +		/*
> +		 * Set up Blue LED for "In U-Boot" status.
> +		 * We're all relocated and ready to U-Boot!
> +		 */
> +		gpio_set_value(EFIKAMX_LED_RED, 0);
> +		gpio_set_value(EFIKAMX_LED_GREEN, 0);
> +		gpio_set_value(EFIKAMX_LED_BLUE, 1);
> +	}
> +
>  	power_init();
>  
> -	setup_iomux_led();
> -	setup_iomux_ata();
> +	imx_iomux_v3_setup_multiple_pads(efikamx_pata_pads,
> ARRAY_SIZE(efikamx_pata_pads));
>  	setup_iomux_usb();
>  
>  	if (machine_is_efikasb())
>  		setenv("preboot", "usb reset ; setenv stdin usbkbd\0");
>  
> -	setup_iomux_led();
> -
> -	efikamx_toggle_led(EFIKAMX_LED_BLUE);
> -
>  	return 0;
>  }
>  
>  int checkboard(void)
>  {
> -	u32 rev = get_efika_rev();
> +	u32 rev = get_efikamx_rev();
>  
> +	printf("Board: Genesi Efika MX ");
>  	if (machine_is_efikamx()) {
> -		printf("Board: Efika MX, rev1.%i\n", rev & 0xf);
> -		return 0;
> -	} else {
> -		switch (rev) {
> -		case EFIKASB_BOARD_REV_13:
> -			printf("Board: Efika SB rev1.3\n");
> -			break;
> -		case EFIKASB_BOARD_REV_20:
> -			printf("Board: Efika SB rev2.0\n");
> -			break;
> -		default:
> -			printf("Board: Efika SB, rev Unknown\n");
> -			break;
> -		}
> +		printf("Smarttop (1.%i)\n", rev & 0xf);
> +	} else if (machine_is_efikasb()) {
> +		printf("Smartbook\n");
>  	}
>  
>  	return 0;

Best regards,
Benoît


More information about the U-Boot mailing list