[U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux

Dirk Behme dirk.behme at de.bosch.com
Wed Aug 1 15:22:30 CEST 2012


On 01.08.2012 14:55, Wolfgang Denk wrote:
> Dear Dirk Behme,
> 
> In message <5019180C.4060109 at de.bosch.com> you wrote:
>> It seems to me that the SGTL5000 kernel feature for the SabreLite was
>> developed with a Freescale U-Boot (patching the kernel with DT append)
>> and not tested with the mainline U-Boot.
> 
> Probably. But the question is still why this should be changed in
> U-Boot.  Why doesn't the Linux driver set the pin mux configuration
> it needs?

Sorry, I don't know. The Linux driver developers told me "there is no 
U-Boot dependency". Maybe they could answer this question? CCed.

Best regards

Dirk


More information about the U-Boot mailing list