[U-Boot] [PATCH v2 0/9] enable thumb for tegra20

[Stephen Warren]

On 08/01/2012 02:32 PM, Allen Martin wrote:
> Add changes necessary to enable thumb compilation for tegra20.  This
> series includes two patches to work around a bug in gas that
> incorrectly optimizes short jumps in thumb mode that were posted
> separately.  They can be dropped from this series when they are applied.

Sorry for the slow response. I tested this on a few boards and found
that while some work fine with this patch, others don't.

OK: Springbank, Ventana, Harmony

Hang with no output at all: Whistler, Paz00, TrimSlice.

I haven't yet attempted to investigate why I'm seeing this problem. I
did validate that simply removing your patch series yielded a working
U-Boot in all cases (working and non-working above) without any other
changes (flashing process, toolchain, ...)