[U-Boot] [PATCH v4 6/7] usb_stor_BBB_transport: Do not delay when not required
Benoît Thébaudeau
benoit.thebaudeau at advansee.com
Fri Aug 10 18:27:11 CEST 2012
There is a 5-ms delay in usb_stor_BBB_transport, which occurs every 10 kiB of
data for fragmented fatload usb, i.e. roughly 500 ms of delay per MiB. This adds
up to quite a bit of delay if you're loading a large ramdisk.
The purpose of this delay should be to debounce the 5-V/100-mA USB power up.
This patch skips the delay if the device has already been queried as ready.
Signed-off-by: Jim Shimer <mgi2475 at motorola.com>
Rework following the review:
- Rebase against the latest u-boot-usb master.
- Replace typedef with #define.
- Use the existing flags struct field instead of adding a new field.
- Remove the setter function.
- Remove the typecasts.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau at advansee.com>
Cc: Marek Vasut <marex at denx.de>
Cc: Ilya Yanok <ilya.yanok at cogentembedded.com>
Cc: Stefan Herbrechtsmeier <stefan at herbrechtsmeier.net>
Cc: Jim Shimer <mgi2475 at motorola.com>
---
Changes for v2: N/A.
Changes for v3:
- New patch.
Changes for v4: None.
.../common/usb_storage.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git u-boot-usb-4f8254e.orig/common/usb_storage.c u-boot-usb-4f8254e/common/usb_storage.c
index f0798b2..b000f09 100644
--- u-boot-usb-4f8254e.orig/common/usb_storage.c
+++ u-boot-usb-4f8254e/common/usb_storage.c
@@ -136,6 +136,7 @@ struct us_data {
struct usb_device *pusb_dev; /* this usb_device */
unsigned int flags; /* from filter initially */
+# define USB_READY (1 << 0)
unsigned char ifnum; /* interface number */
unsigned char ep_in; /* in endpoint */
unsigned char ep_out; /* out ....... */
@@ -698,7 +699,8 @@ int usb_stor_BBB_transport(ccb *srb, struct us_data *us)
usb_stor_BBB_reset(us);
return USB_STOR_TRANSPORT_FAILED;
}
- mdelay(5);
+ if (!(us->flags & USB_READY))
+ mdelay(5);
pipein = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
pipeout = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
/* DATA phase + error handling */
@@ -963,8 +965,10 @@ static int usb_test_unit_ready(ccb *srb, struct us_data *ss)
srb->cmd[1] = srb->lun << 5;
srb->datalen = 0;
srb->cmdlen = 12;
- if (ss->transport(srb, ss) == USB_STOR_TRANSPORT_GOOD)
+ if (ss->transport(srb, ss) == USB_STOR_TRANSPORT_GOOD) {
+ ss->flags |= USB_READY;
return 0;
+ }
usb_request_sense(srb, ss);
mdelay(100);
} while (retries--);
@@ -1114,6 +1118,7 @@ retry_it:
blks -= smallblks;
buf_addr += srb->datalen;
} while (blks != 0);
+ ss->flags &= ~USB_READY;
USB_STOR_PRINTF("usb_read: end startblk %lx, blccnt %x buffer %lx\n",
start, smallblks, buf_addr);
@@ -1193,6 +1198,7 @@ retry_it:
blks -= smallblks;
buf_addr += srb->datalen;
} while (blks != 0);
+ ss->flags &= ~USB_READY;
USB_STOR_PRINTF("usb_write: end startblk %lx, blccnt %x buffer %lx\n",
start, smallblks, buf_addr);
@@ -1404,6 +1410,7 @@ int usb_stor_get_info(struct usb_device *dev, struct us_data *ss,
cap[0] = 2880;
cap[1] = 0x200;
}
+ ss->flags &= ~USB_READY;
USB_STOR_PRINTF("Read Capacity returns: 0x%lx, 0x%lx\n", cap[0],
cap[1]);
#if 0
More information about the U-Boot
mailing list