[U-Boot] [PATCH] powerpc/p1022ds: fix DIU/LBC switching with NAND enabled

[Andy Fleming]

On Fri, May 18, 2012 at 2:09 PM, Timur Tabi <timur at freescale.com> wrote:
> In order for indirect mode on the PIXIS to work properly, both chip selects
> need to be set to GPCM mode, otherwise writes to the chip select base
> addresses will not actually post to the local bus -- they'll go to the
> NAND controller instead.  Therefore, we need to set BR0 and BR1 to GPCM
> mode before switching to indirect mode.
>
> Signed-off-by: Timur Tabi <timur at freescale.com>

Applied, thanks