[U-Boot] [PATCH 2/6] powerpc/corenet_ds: Get rid of the SRIOBOOT_MASTER build target

[Liu Gang]

Hi, Andy,

I have sent the updated patches to the patchwork.
Do you have more comments?
And would you please help to check and apply the patches?

http://patchwork.ozlabs.org/patch/176170/

Thanks a lot!

Best Regards!

Liu Gang


On Thu, 2012-08-09 at 23:15 +0800, Liu Gang wrote:
> On Wed, 2012-08-08 at 18:31 -0500, Andy Fleming wrote:
> > On Thu, Jun 7, 2012 at 1:43 AM, Liu Gang <Gang.Liu at freescale.com> wrote:
> > > Signed-off-by: Liu Gang <Gang.Liu at freescale.com>
> > > ---
> > >  arch/powerpc/cpu/mpc85xx/cpu_init.c |   17 +++--
> > >  arch/powerpc/cpu/mpc8xxx/srio.c     |  137 ++++++++++++-----------------------
> > 
> > 
> > The change here (and in fsl_pci_init.c in another patch) causes
> > horrible build breakage if you aren't building with the
> > CONFIG_SRIO_PCIE_BOOT_SLAVE option.
> > 
> > Please rework so that you can build *without* that option!
> > 
> > Andy
> > 
> 
> Hi, Andy,
> Thanks a lot for your comment.
> You are right, there will be build breakage when building the
> non-corenet platform.
> I have resolved this issue in v2 and have sent the new patches
> to open source.
> Please help to check.
> 
> Thanks!
> Best Regards,
> Liu Gang
> 
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>