[U-Boot] [PATCH v2 1/4] efikamx: move and rename Efika MX directories and config files to prepare for new boards

[Stefano Babic]

On 22/08/2012 21:25, Matt Sealey wrote:
> * Move Efika MX Smarttop and Smartbook boards into a "genesi" vendor directory
> * Rename efikamx -> mx51_efikamx since there is an mx53_efikamx and mx6_efikamx to come
> 
> Signed-off-by: Matt Sealey <matt at genesi-usa.com>
> ---
>  board/{efikamx => genesi/mx51_efikamx}/Makefile    |    0
>  .../{efikamx => genesi/mx51_efikamx}/efikamx-usb.c |    2 +-
>  board/{efikamx => genesi/mx51_efikamx}/efikamx.c   |    0
>  .../mx51_efikamx}/imximage_mx.cfg                  |    0
>  .../mx51_efikamx}/imximage_sb.cfg                  |    0
>  boards.cfg                                         |    4 ++--
>  include/configs/{efikamx.h => mx51_efikamx.h}      |    0
>  7 files changed, 3 insertions(+), 3 deletions(-)
>  rename board/{efikamx => genesi/mx51_efikamx}/Makefile (100%)
>  rename board/{efikamx => genesi/mx51_efikamx}/efikamx-usb.c (99%)
>  rename board/{efikamx => genesi/mx51_efikamx}/efikamx.c (100%)
>  rename board/{efikamx => genesi/mx51_efikamx}/imximage_mx.cfg (100%)
>  rename board/{efikamx => genesi/mx51_efikamx}/imximage_sb.cfg (100%)
>  rename include/configs/{efikamx.h => mx51_efikamx.h} (100%)
> 
> diff --git a/board/efikamx/Makefile b/board/genesi/mx51_efikamx/Makefile
> similarity index 100%
> rename from board/efikamx/Makefile
> rename to board/genesi/mx51_efikamx/Makefile
> diff --git a/board/efikamx/efikamx-usb.c b/board/genesi/mx51_efikamx/efikamx-usb.c
> similarity index 99%
> rename from board/efikamx/efikamx-usb.c
> rename to board/genesi/mx51_efikamx/efikamx-usb.c
> index 618b39d..e9273d0 100644
> --- a/board/efikamx/efikamx-usb.c
> +++ b/board/genesi/mx51_efikamx/efikamx-usb.c
> @@ -33,7 +33,7 @@
>  #include <usb/ulpi.h>
>  #include <errno.h>
>  
> -#include "../../drivers/usb/host/ehci.h"
> +#include "../../../drivers/usb/host/ehci.h"
>  
>  /* USB pin configuration */
>  #define USB_PAD_CONFIG	(PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST | \
> diff --git a/board/efikamx/efikamx.c b/board/genesi/mx51_efikamx/efikamx.c
> similarity index 100%
> rename from board/efikamx/efikamx.c
> rename to board/genesi/mx51_efikamx/efikamx.c
> diff --git a/board/efikamx/imximage_mx.cfg b/board/genesi/mx51_efikamx/imximage_mx.cfg
> similarity index 100%
> rename from board/efikamx/imximage_mx.cfg
> rename to board/genesi/mx51_efikamx/imximage_mx.cfg
> diff --git a/board/efikamx/imximage_sb.cfg b/board/genesi/mx51_efikamx/imximage_sb.cfg
> similarity index 100%
> rename from board/efikamx/imximage_sb.cfg
> rename to board/genesi/mx51_efikamx/imximage_sb.cfg
> diff --git a/boards.cfg b/boards.cfg
> index edd750c..a9ec44b 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -215,8 +215,8 @@ integratorcp_cm946es         arm         arm946es    integrator          armltd
>  ca9x4_ct_vxp                 arm         armv7       vexpress            armltd
>  am335x_evm                   arm         armv7       am335x              ti             am33xx
>  highbank                     arm         armv7       highbank            -              highbank
> -efikamx                      arm         armv7       efikamx             -              mx5		efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/efikamx/imximage_mx.cfg
> -efikasb                      arm         armv7       efikamx             -              mx5		efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/efikamx/imximage_sb.cfg
> +mx51_efikamx                 arm         armv7       mx51_efikamx        genesi         mx5		mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg
> +mx51_efikasb                 arm         armv7       mx51_efikamx        genesi         mx5		mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_sb.cfg
>  mx51evk                      arm         armv7       mx51evk             freescale      mx5		mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg
>  mx53ard                      arm         armv7       mx53ard             freescale      mx5		mx53ard:IMX_CONFIG=board/freescale/mx53ard/imximage_dd3.cfg
>  mx53evk                      arm         armv7       mx53evk             freescale      mx5		mx53evk:IMX_CONFIG=board/freescale/mx53evk/imximage.cfg
> diff --git a/include/configs/efikamx.h b/include/configs/mx51_efikamx.h
> similarity index 100%
> rename from include/configs/efikamx.h
> rename to include/configs/mx51_efikamx.h
> 

It is fine with me.

Acked-by: Stefano Babic <sbabic at denx.de>

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================