[U-Boot] [PATCH V4 01/11] imximage: mx53 needs transfer length a multiple of 512

[Stefano Babic]

On 29/11/2012 06:28, Wolfgang Denk wrote:
> Dear Troy Kisky,
> 
> In message <50B6CB79.4030007 at boundarydevices.com> you wrote:
>>
>> Would you like to see the Linux way of ALIGN, or ROUND?
> 
> Do you align some buffer or similar, or do you round (up) a size?
> 
>> Now, back to the other topic you raised. Should I apply the bug work-around
>> for all version 2 headers, or find a way to distinguish mx53/mx6?

> 
> I cannot tell.  Stefano, what do you think?

Well, I am thinking about which are the real benefits. If we always
round up the size to 512 bytes for V2 header, *maybe* we constrain the
i.MX6 to load some bytes more, but it is the only drawback. And this if
the i.MX6 does not suffer of the same problem found on i.MX53.

On the other side, having two different versions of V2 header is
confusing. It is then undocumented by Freescale, and maybe it is
possible to find a note in some errata. Having the same interface
without special hacking for each SOC overcomes the increment in the
footprint for the i.MX6 (in worst case 511 bytes - and not a lot
compared to current size of U-Boot for MX5/MX6, usually several hundred
of KB).

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================