December 2012 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Sat Dec 1 00:01:14 CET 2012
Ending: Mon Dec 31 17:32:43 CET 2012
Messages: 1825

• [U-Boot] [PATCH v2 01/10] arm: move flush_dcache_all() to just before disable cache   Simon Glass
• [U-Boot] [PATCH v2 02/10] arm: Keep track of the tlb size as well as its location   Simon Glass
• [U-Boot] [PATCH v2 03/10] arm: Move fdt check earlier so that board_early_init_f() can use it   Simon Glass
• [U-Boot] [PATCH v2 04/10] arm: Add CONFIG_DELAY_ENVIRONMENT to delay environment loading   Simon Glass
• [U-Boot] [PATCH v2 05/10] Document the CONFIG_DISPLAY_BOARDINFO option   Simon Glass
• [U-Boot] [PATCH v2 06/10] arm: Add CONFIG_DISPLAY_BOARDINFO_LATE to display board info on LCD   Simon Glass
• [U-Boot] [PATCH v2 07/10] Add option to display customised memory information   Simon Glass
• [U-Boot] [PATCH v2 08/10] arm: Make interrupts.o and reset.o in libarm also appear in SPL   Simon Glass
• [U-Boot] [PATCH v2 09/10] arm: Move bootstage record for board_init_f() to after arch_cpu_init()   Simon Glass
• [U-Boot] [PATCH v2 10/10] arm: Tabify code for MMC initialization   Simon Glass
• [U-Boot] [PATCH v2] mmc: Split device init to decouple OCR-polling delay   Simon Glass
• [U-Boot] [PATCH v2] mmc: Split device init to decouple OCR-polling delay   Simon Glass
• [U-Boot] U-Boot for MIPS AR7161   Dmytro
• [U-Boot] [PATCH 1/1] mtd/cfi: add support for SST 4KB sector granularity   Angelo Dureghello
• [U-Boot] [PATCH 1/2] patman: Cache the CC list from MakeCcFile() for use in ShowActions()   Doug Anderson
• [U-Boot] [PATCH 2/2] patman: Add all CC addresses to the cover letter   Doug Anderson
• [U-Boot] [PATCH 1/4] patman: Add a call to get_maintainer.pl if it exists   Doug Anderson
• [U-Boot] [PATCH 2/4] patman: Add support for settings in .patman   Doug Anderson
• [U-Boot] [PATCH 3/4] patman: Add the concept of multiple projects   Doug Anderson
• [U-Boot] [PATCH 4/4] patman: Add settings to the list of modules to doctest   Doug Anderson
• [U-Boot] [PATCH v2 04/10] arm: Add CONFIG_DELAY_ENVIRONMENT to delay environment loading   Doug Anderson
• [U-Boot] [PATCH v2] mxs: i2c: Implement algorithm to set up arbitrary i2c speed   Heiko Schocher
• [U-Boot] [PATCH v2] mxs: i2c: Implement algorithm to set up arbitrary i2c speed   Marek Vasut
• [U-Boot] U-Boot for MIPS AR7161   Drassal, Allan
• [U-Boot] [PATCH 1/2] mxs: i2c: Restore speed setting after block reset   Marek Vasut
• [U-Boot] [PATCH 2/2 V3] mxs: i2c: Implement algorithm to set up arbitrary i2c speed   Marek Vasut
• [U-Boot] [PATCHv3 1/4] usb documentation: fix typo   Marek Vasut
• [U-Boot] [PATCH v3 1/9] usb: Fix bug when both DFU & ETHER are defined   Marek Vasut
• [U-Boot] [PATCH v3 4/9] dfu: Only perform DFU board_usb_init() for TRATS   Marek Vasut
• [U-Boot] [PATCH v3 0/9] USB: Gadget & DFU related fixes   Marek Vasut
• [U-Boot] U-Boot for MIPS AR7161   Drassal, Allan
• [U-Boot] [PATCH v3 0/3] apf27: add support of armadeus apf27   Philippe Reynes
• [U-Boot] [PATCH v3 1/3] apf27: add missing constant to mx27   Philippe Reynes
• [U-Boot] [PATCH v2 2/3] apf27: add support for the armadeus APF27 board   Philippe Reynes
• [U-Boot] [PATCH v3 3/3] apf27: add FPGA support for the apf27 board   Philippe Reynes
• [U-Boot] Please pull u-boot-x86.git   Simon Glass
• [U-Boot] [PATCH v2 20/23] Add command to show DRAM configuration   Simon Glass
• [U-Boot] [PATCH v2 09/23] Add stricmp() and strnicmp()   Simon Glass
• [U-Boot] JFFS2 seems to drop nand data with ECC corrections   Deltour, Stephane
• [U-Boot] Please pull u-boot-x86.git   Tom Rini
• [U-Boot] [PATCH 03/11] arm: ks8695eth: Use MAC address from environment   Joe Hershberger
• [U-Boot] [PATCH v2 10/23] Add generic hash API   Joe Hershberger
• [U-Boot] [PATCH v2 12/23] Add hash command to perform hashing using various algorithms   Joe Hershberger
• [U-Boot] Please pull u-boot-x86.git   Simon Glass
• [U-Boot] [PATCH v3 0/18] Add environment call-back and flags capability   Joe Hershberger
• [U-Boot] arm: Question regarding empty isb() in set_cr   Joe Kulikauskas
• [U-Boot] [PATCH 01/15] x86: Add function to read time stamp counter   Simon Glass
• [U-Boot] [PATCH 2/2] WIP: Test version of buildman - U-Boot builder   Simon Glass
• [U-Boot] [PATCH 05/15] x86: Add basic cache operations   Simon Glass
• [U-Boot] U-Boot for MIPS AR7161   Dmytro
• [U-Boot] [PATCH] cm-t35: add USB host support   Nikita Kiryanov
• [U-Boot] [PATCH] cm-t35: add USB host support   Marek Vasut
• [U-Boot] U-Boot for MIPS AR7161   Drassal, Allan
• [U-Boot] [PATCH V2 0/2] Add USB host support for CM-T35   Nikita Kiryanov
• [U-Boot] [PATCH V2 1/2] twl4030: add gpio register offsets   Nikita Kiryanov
• [U-Boot] [PATCH V2 2/2] cm-t35: add USB host support   Nikita Kiryanov
• [U-Boot] [PATCH v2 2/3] x86: Enable ICH6 GPIO controller for coreboot   Simon Glass
• [U-Boot] [PATCH 00/10] Add Marvell Dove and SolidRun CuBox   Sebastian Hesselbarth
• [U-Boot] [PATCH 01/10] ARM: dove: add support for Marvell Dove SoC   Sebastian Hesselbarth
• [U-Boot] [PATCH 02/10] GPIO: add gpio driver for Orion SoCs   Sebastian Hesselbarth
• [U-Boot] [PATCH 03/10] MMC: sdhci: Add support for dove sdhci   Sebastian Hesselbarth
• [U-Boot] [PATCH 04/10] SPI: Add Orion SPI driver   Sebastian Hesselbarth
• [U-Boot] [PATCH 05/10] block: mvsata: add dove include   Sebastian Hesselbarth
• [U-Boot] [PATCH 06/10] NET: phy: add 88E1310 PHY initialization   Sebastian Hesselbarth
• [U-Boot] [PATCH 07/10] NET: mvgbe: add phylib support   Sebastian Hesselbarth
• [U-Boot] [PATCH 08/10] NET: mvgbe: add support for Dove   Sebastian Hesselbarth
• [U-Boot] [PATCH 09/10] Boards: Add support for SolidRun CuBox   Sebastian Hesselbarth
• [U-Boot] [PATCH 10/10] tools: Add support for Dove to kwboot   Sebastian Hesselbarth
• [U-Boot] [PATCH v2 05/15] x86: Add basic cache operations   Simon Glass
• [U-Boot] [PATCH v2 07/15] x86: Import MSR/MTRR code from Linux   Simon Glass
• [U-Boot] [PATCH v2 08/15] x86: Clean up MTRR 7 right before jumping to the kernel   Simon Glass
• [U-Boot] [PATCH v2 10/15] x86: Enable CONFIG_CMD_ZBOOT for coreboot   Simon Glass
• [U-Boot] [PATCH v2 07/15] x86: Import MSR/MTRR code from Linux   Simon Glass
• [U-Boot] [PATCH v2 14/15] Introduce arch_phys_memset which works like memset but on physical memory   Simon Glass
• [U-Boot] [PATCH 2/4] apf27: add support for the armadeus APF27 board   trem
• [U-Boot] [PATCH 3/4] apf27: add spl support for the apf27   trem
• [U-Boot] [PATCH] fix linker generated lists on non-C locales   Pavel Herrmann
• [U-Boot] [PATCH] fix linker generated lists on non-C locales   Marek Vasut
• [U-Boot] [PATCH] fix linker generated lists on non-C locales   Pavel Herrmann
• [U-Boot] [PATCH] fix linker generated lists on non-C locales   Marek Vasut
• [U-Boot] [PATCH] fix linker generated lists on non-C locales   Pavel Herrmann
• [U-Boot] [PATCH] fix linker generated lists on non-C locales   Pavel Herrmann
• [U-Boot] [PATCH 01/10] ARM: dove: add support for Marvell Dove SoC   Luka Perkov
• [U-Boot] [PATCH 09/10] Boards: Add support for SolidRun CuBox   Luka Perkov
• [U-Boot] [PATCH] fix linker generated lists on non-C locales   Marek Vasut
• [U-Boot] [PATCH] fix linker generated lists on non-C locales   Marek Vasut
• [U-Boot] U-Boot for MIPS AR7161   Daniel Schwierzeck
• [U-Boot] [PATCH 10/10] tools: Add support for Dove to kwboot   Luka Perkov
• [U-Boot] U-Boot for MIPS AR7161   Wolfgang Denk
• [U-Boot] [PATCH v2 14/15] Introduce arch_phys_memset which works like memset but on physical memory   Wolfgang Denk
• [U-Boot] [PATCH] fix linker generated lists on non-C locales   Wolfgang Denk
• [U-Boot] [PATCH] fix linker generated lists on non-C locales   Wolfgang Denk
• [U-Boot] [PATCH 3/4] fs:ext4:fix: Code refactoring to suppress compiler warnings   Simon Glass
• [U-Boot] [PATCH v2 14/15] Introduce arch_phys_memset which works like memset but on physical memory   Simon Glass
• [U-Boot] [PATCH v2 14/15] Introduce arch_phys_memset which works like memset but on physical memory   Wolfgang Denk
• [U-Boot] [PATCH 00/10] PXE support updates   Rob Herring
• [U-Boot] [PATCH 01/10] pxe: Use ethact setting for pxe   Rob Herring
• [U-Boot] [PATCH 02/10] pxe: make string parameters const   Rob Herring
• [U-Boot] [PATCH 03/10] pxe: fix handling of different localboot values   Rob Herring
• [U-Boot] [PATCH 04/10] bootz: un-staticize do_bootz   Rob Herring
• [U-Boot] [PATCH 05/10] pxe: use bootz instead of bootm when enabled   Rob Herring
• [U-Boot] [PATCH 06/10] pxe: always display a menu when present   Rob Herring
• [U-Boot] [PATCH 07/10] pxe: simplify menu display and selection   Rob Herring
• [U-Boot] [PATCH 08/10] pxe: add support for ontimeout token   Rob Herring
• [U-Boot] [PATCH 09/10] pxe: add support for per arch and SoC default paths   Rob Herring
• [U-Boot] [PATCH 10/10] pxe: add ipappend support   Rob Herring
• [U-Boot] [PATCH 1/2] ARM: add wfi assembly macro   Rob Herring
• [U-Boot] [PATCH 2/2] ARM: highbank: use wfi macro instead of inline asm   Rob Herring
• [U-Boot] [PATCH] serial_pl011: Set RTS during initialization   Rob Herring
• [U-Boot] [PATCH] fix linker generated lists on non-C locales   Marek Vasut
• [U-Boot] [PATCH v4 3/4] dtc/libfdt: introduce fdt types for annotation by endian checkers   David Gibson
• [U-Boot] [PATCH V2 0/2] Add USB host support for CM-T35   Marek Vasut
• [U-Boot] [PATCH] serial_pl011: Set RTS during initialization   Marek Vasut
• [U-Boot] [PATCH 1/2] ARM: add wfi assembly macro   Marek Vasut
• [U-Boot] [PATCH 00/46] Enhance spear support   Vipin Kumar
• [U-Boot] [PATCH 5/6 V4] I2C: Driver changes for FDT support   Rajeshwari Birje
• [U-Boot] Reg Bootstrapping on x86-64 for tizen   manohar.betham at smartplayin.com
• [U-Boot] [PATCH 3/5] Add fuse API and commands   Stefano Babic
• [U-Boot] [PATCH V4 01/11] imximage: mx53 needs transfer length a multiple of 512   Stefano Babic
• [U-Boot] [PATCH V4 01/11] imximage: mx53 needs transfer length a multiple of 512   Stefano Babic
• [U-Boot] U-Boot for MIPS AR7161   Dmytro
• [U-Boot] U-Boot for MIPS AR7161   Drassal, Allan
• [U-Boot] [PATCH] usb: Fix bug when both DFU & ETHER are defined   Pantelis Antoniou
• [U-Boot] [PATCH v3 1/9] usb: Fix bug when both DFU & ETHER are defined   Pantelis Antoniou
• [U-Boot] [PATCH 0/4] EXYNOS5: Add FDT support to SPI   Rajeshwari Shinde
• [U-Boot] [PATCH 1/4] EXYNOS5: FDT: Add compatible strings for SPI   Rajeshwari Shinde
• [U-Boot] [PATCH 2/4] EXYNOS5 : FDT: Add Aliases for SPI device   Rajeshwari Shinde
• [U-Boot] [PATCH 3/4] EXYNOS5: FDT: Add SPI device node data   Rajeshwari Shinde
• [U-Boot] [PATCH 4/4] SPI: EXYNOS: Add FDT support to driver.   Rajeshwari Shinde
• [U-Boot] [PATCH 3/5] Add fuse API and commands   Benoît Thébaudeau
• [U-Boot] [PATCH 3/5] Add fuse API and commands   Stefano Babic
• [U-Boot] [PATCH 0/3] EXYNOS5: MAX77686 add FDT support.   Rajeshwari Shinde
• [U-Boot] [PATCH 1/3] EXYNOS5: FDT: Add compatible strings for PMIC   Rajeshwari Shinde
• [U-Boot] [PATCH 2/3] EXYNOS5: Add device node for PMIC   Rajeshwari Shinde
• [U-Boot] [PATCH 3/3] PMIC: MAX77686: Add FDT Support   Rajeshwari Shinde
• [U-Boot] Please pull u-boot-x86.git   Otavio Salvador
• [U-Boot] [PATCH 0/7] omap mmc: implement card detect and write protection   Nikita Kiryanov
• [U-Boot] [PATCH 1/7] omap: consolidate common mmc definitions   Nikita Kiryanov
• [U-Boot] [PATCH 2/7] omap_hsmmc: fix out of bounds array access   Nikita Kiryanov
• [U-Boot] [PATCH 3/7] omap_hsmmc: introduce omap_hsmmc_data struct   Nikita Kiryanov
• [U-Boot] [PATCH 4/7] omap_hsmmc: implement driver check for card detection   Nikita Kiryanov
• [U-Boot] [PATCH 5/7] cm-t35: implement board specific card detect check   Nikita Kiryanov
• [U-Boot] [PATCH 6/7] mmc: add support for write protection   Nikita Kiryanov
• [U-Boot] [PATCH 7/7] omap_hsmmc: add driver check for write protection   Nikita Kiryanov
• [U-Boot] [PATCH 05/10] pxe: use bootz instead of bootm when enabled   Wolfgang Denk
• [U-Boot] [PATCH] fix linker generated lists on non-C locales   Wolfgang Denk
• [U-Boot] Please pull u-boot-x86.git   Simon Glass
• [U-Boot] [PATCH 0/2] EXYNOS5: Add VBus init required for USB   Rajeshwari Shinde
• [U-Boot] [PATCH 1/2] EXYNOS5: Add pinmux for VBus   Rajeshwari Shinde
• [U-Boot] [PATCH 2/2] SMDK5250: Enable VBus for USB   Rajeshwari Shinde
• [U-Boot] [PATCH] Change e-mail address of Luka Perkov   Luka Perkov
• [U-Boot] [PATCH 0/3] EXYNOS5: Add FDT support for USB   Rajeshwari Shinde
• [U-Boot] [PATCH 1/3] EHCI: Exynos: Add fdt support   Rajeshwari Shinde
• [U-Boot] [PATCH 2/3] EXYNOS5: Add device node for USB.   Rajeshwari Shinde
• [U-Boot] [PATCH 3/3] EXYNOS5: FDT: Add compatible strings for USB   Rajeshwari Shinde
• [U-Boot] [PATCH 1/2] EXYNOS5: Add pinmux for VBus   Kyungmin Park
• [U-Boot] [PATCH 1/2] ARM: add wfi assembly macro   Rob Herring
• [U-Boot] [PATCH 1/2] EXYNOS5: Add pinmux for VBus   Rajeshwari Birje
• [U-Boot] [PATCH v2] include/linux/byteorder: Always defines __fswab64, __swab64p and __swab64s   Tom Rini
• [U-Boot] Pull request: u-boot-sh/master   Tom Rini
• [U-Boot] [PATCH v2 14/15] Introduce arch_phys_memset which works like memset but on physical memory   Tom Rini
• [U-Boot] Please pull u-boot-x86.git   Tom Rini
• [U-Boot] [PATCH 1/2] EXYNOS5: Add pinmux for VBus   Kyungmin Park
• [U-Boot] [PATCH 05/10] pxe: use bootz instead of bootm when enabled   Rob Herring
• [U-Boot] [PATCH] cm_t35: use new low level interface for usb ehci   Nikita Kiryanov
• [U-Boot] Please pull u-boot-x86.git   Otavio Salvador
• [U-Boot] Please pull u-boot-x86.git   Tom Rini
• [U-Boot] [PATCH] fix linker generated lists on non-C locales   Marek Vasut
• [U-Boot] [PATCH 0/2] EXYNOS5: Add VBus init required for USB   Marek Vasut
• [U-Boot] [PATCH 1/2] ARM: add wfi assembly macro   Marek Vasut
• [U-Boot] [PATCH 1/3] EHCI: Exynos: Add fdt support   Marek Vasut
• [U-Boot] [PATCH 0/3] EXYNOS5: Add FDT support for USB   Marek Vasut
• [U-Boot] [PATCH] cm_t35: use new low level interface for usb ehci   Marek Vasut
• [U-Boot] [PATCH] usb: Fix bug when both DFU & ETHER are defined   Marek Vasut
• [U-Boot] [PATCH 0/57] RFC: Move arch-specific global data into its own structure   Tom Rini
• [U-Boot] Patches to add some more omap24xx_i2c/twl6035 error handling   Vincent Stehlé
• [U-Boot] [PATCH 1/2] omap24xx_i2c: Handle wait_for_bb error   Vincent Stehlé
• [U-Boot] [PATCH 2/2] power: twl6035: complain on LDO9 error   Vincent Stehlé
• [U-Boot] [PATCH] cmd_time: merge run_command_and_time_it with cmd_process   Richard Genoud
• [U-Boot] [PATCH] cmd_time: merge run_command_and_time_it with cmd_process   Stefan Roese
• [U-Boot] [PATCH] omap24xx_i2c: Handle OMAP5 like OMAP2,3,4   Vincent Stehlé
• [U-Boot] [PATCH] cmd_time: merge run_command_and_time_it with cmd_process   Richard Genoud
• [U-Boot] [PATCHv2] cmd_time: merge run_command_and_time_it with cmd_process   Richard Genoud
• [U-Boot] [PATCH v2 14/15] Introduce arch_phys_memset which works like memset but on physical memory   Simon Glass
• [U-Boot] [PATCH v2] pxe: try bootz if bootm fails to find a valid image   Rob Herring
• [U-Boot] Please pull u-boot-mpc85xx.git   Tabi Timur-B04825
• [U-Boot] [PATCH] cmd_time: merge run_command_and_time_it with cmd_process   Che-liang Chiou
• [U-Boot] [PATCHv2] cmd_time: merge run_command_and_time_it with cmd_process   Che-liang Chiou
• [U-Boot] [PATCH 0/57] RFC: Move arch-specific global data into its own structure   Graeme Russ
• [U-Boot] [PATCH v2 0/7] Add support for NVIDIA Tegra30 SoC   Tom Warren
• [U-Boot] [PATCH 0/57] RFC: Move arch-specific global data into its own structure   Simon Glass
• [U-Boot] [PATCH v2 0/7] Add support for NVIDIA Tegra30 SoC   Tom Warren
• [U-Boot] [PATCH 1/2] patman: Cache the CC list from MakeCcFile() for use in ShowActions()   Simon Glass
• [U-Boot] [PATCH 2/2] patman: Add all CC addresses to the cover letter   Simon Glass
• [U-Boot] [PATCH 1/4] patman: Add a call to get_maintainer.pl if it exists   Simon Glass
• [U-Boot] [PATCH 2/4] patman: Add support for settings in .patman   Simon Glass
• [U-Boot] [PATCH 3/4] patman: Add the concept of multiple projects   Simon Glass
• [U-Boot] [PATCH 4/4] patman: Add settings to the list of modules to doctest   Simon Glass
• [U-Boot] [PATCH 0/57] RFC: Move arch-specific global data into its own structure   Tom Rini
• [U-Boot] [PATCH v2 0/7] Add support for NVIDIA Tegra30 SoC   Tom Warren
• [U-Boot] [PATCH v2 1/7] Tegra30: Add arch-tegra30 include files   Tom Warren
• [U-Boot] [PATCH v2 2/7] Tegra30: Add AVP (arm720t) files   Tom Warren
• [U-Boot] [PATCH v2 3/7] Tegra30: Add CPU (armv7) files   Tom Warren
• [U-Boot] [PATCH 0/57] RFC: Move arch-specific global data into its own structure   Graeme Russ
• [U-Boot] [PATCH V2 4/7] Tegra30: Add common CPU (shared) files   Tom Warren
• [U-Boot] [PATCH v2 5/7] Tegra30: Cardhu: Add DT files   Tom Warren
• [U-Boot] [PATCH v2 6/7] Tegra30: Add generic Tegra30 build support   Tom Warren
• [U-Boot] [PATCH v2 7/7] Tegra30: Add/enable Cardhu build (T30 reference board)   Tom Warren
• [U-Boot] [PATCH v2 10/21] x86: fdt: Create basic .dtsi file for coreboot   Simon Glass
• [U-Boot] [PATCH v2 11/21] x86: Emit port 80 post codes in show_boot_progress()   Simon Glass
• [U-Boot] [PATCH v2 12/21] x86: Fix MTRR clear to detect which MTRR to use   Simon Glass
• [U-Boot] [PATCH v2 14/21] x86: Provide tick counter and frequency reference for Intel core architecture   Simon Glass
• [U-Boot] [PATCH v2 20/21] x86: Build vga video code only if CONFIG_VIDEO_VGA is defined   Simon Glass
• [U-Boot] [PATCH v2 0/7] Add support for NVIDIA Tegra30 SoC   Stephen Warren
• [U-Boot] [PATCH v2 1/7] Tegra30: Add arch-tegra30 include files   Stephen Warren
• [U-Boot] [PATCH v2 05/21] x86: Override calculate_relocation_address to use the e820 map   Simon Glass
• [U-Boot] [PATCH v2 2/7] Tegra30: Add AVP (arm720t) files   Stephen Warren
• [U-Boot] [PATCH v2 3/7] Tegra30: Add CPU (armv7) files   Stephen Warren
• [U-Boot] [PATCH v2 1/2] patman: Cache the CC list from MakeCcFile() for use in ShowActions()   Doug Anderson
• [U-Boot] [PATCH v2 2/2] patman: Add all CC addresses to the cover letter   Doug Anderson
• [U-Boot] [PATCH v2 5/7] Tegra30: Cardhu: Add DT files   Stephen Warren
• [U-Boot] [PATCH 2/2] patman: Add all CC addresses to the cover letter   Doug Anderson
• [U-Boot] [PATCH v2 6/7] Tegra30: Add generic Tegra30 build support   Stephen Warren
• [U-Boot] [PATCH 3/4] patman: Add the concept of multiple projects   Doug Anderson
• [U-Boot] [PATCH v2 1/4] patman: Add a call to get_maintainer.pl if it exists   Doug Anderson
• [U-Boot] [PATCH v2 2/4] patman: Add support for settings in .patman   Doug Anderson
• [U-Boot] [PATCH v2 3/4] patman: Add the concept of multiple projects   Doug Anderson
• [U-Boot] [PATCH v2 4/4] patman: Add settings to the list of modules to doctest   Doug Anderson
• [U-Boot] [PATCH v2 5/7] Tegra30: Cardhu: Add DT files   Simon Glass
• [U-Boot] [PATCH v2 7/7] Tegra30: Add/enable Cardhu build (T30 reference board)   Stephen Warren
• [U-Boot] [PATCH v2 2/2] patman: Add all CC addresses to the cover letter   Simon Glass
• [U-Boot] [PATCH v2 3/4] patman: Add the concept of multiple projects   Simon Glass
• [U-Boot] [PATCH v2 5/7] Tegra30: Cardhu: Add DT files   Stephen Warren
• [U-Boot] [PATCH v2 5/7] Tegra30: Cardhu: Add DT files   Simon Glass
• [U-Boot] Reg Bootstrapping on x86-64 for tizen   Simon Glass
• [U-Boot] [PATCH 2/4] EXYNOS5 : FDT: Add Aliases for SPI device   Simon Glass
• [U-Boot] [PATCH 1/4] EXYNOS5: FDT: Add compatible strings for SPI   Simon Glass
• [U-Boot] [PATCH 3/4] EXYNOS5: FDT: Add SPI device node data   Simon Glass
• [U-Boot] [PATCH 1/3] EXYNOS5: FDT: Add compatible strings for PMIC   Simon Glass
• [U-Boot] [PATCH 2/3] EXYNOS5: Add device node for PMIC   Simon Glass
• [U-Boot] [PATCH 3/3] PMIC: MAX77686: Add FDT Support   Simon Glass
• [U-Boot] [PATCH 2/2] SMDK5250: Enable VBus for USB   Simon Glass
• [U-Boot] [PATCH 3/3] EXYNOS5: FDT: Add compatible strings for USB   Simon Glass
• [U-Boot] [PATCH] powerpc/p2041: move Lanes mux to board early init   Shaohui Xie
• [U-Boot] [PATCH] mx28: Remove SET, CLR, TOG ops from PLLxCTRL1 registers   Stefano Babic
• [U-Boot] [PATCH] mx23: Add POWER and CLKCTRL register definitions   Stefano Babic
• [U-Boot] [PATCH] mxs: Silence elftosb   Stefano Babic
• [U-Boot] [PATCH V4 08/11] imximage: enable word writes for version2 header   Stefano Babic
• [U-Boot] [PATCH 1/2] mxs: Implement common function to setup VDDx   Stefano Babic
• [U-Boot] [PATCH 2/2] mxs: Properly setup VDDD in power supply setup code   Stefano Babic
• [U-Boot] [PATCH] mxs: Staticize SPL functions   Stefano Babic
• [U-Boot] [PATCH v2 00/10] Add Marvell Dove and SolidRun CuBox   Sebastian Hesselbarth
• [U-Boot] [PATCH v2 01/10] ARM: dove: add support for Marvell Dove SoC   Sebastian Hesselbarth
• [U-Boot] [PATCH v2 02/10] GPIO: add gpio driver for Orion SoCs   Sebastian Hesselbarth
• [U-Boot] [PATCH v2 03/10] MMC: sdhci: Add support for dove sdhci   Sebastian Hesselbarth
• [U-Boot] [PATCH v2 04/10] SPI: Add Orion SPI driver   Sebastian Hesselbarth
• [U-Boot] [PATCH v2 05/10] block: mvsata: add dove include   Sebastian Hesselbarth
• [U-Boot] [PATCH v2 06/10] NET: phy: add 88E1310 PHY initialization   Sebastian Hesselbarth
• [U-Boot] [PATCH v2 07/10] NET: mvgbe: add phylib support   Sebastian Hesselbarth
• [U-Boot] [PATCH v2 08/10] NET: mvgbe: add support for Dove   Sebastian Hesselbarth
• [U-Boot] [PATCH v2 09/10] Boards: Add support for SolidRun CuBox   Sebastian Hesselbarth
• [U-Boot] [PATCH v2 10/10] tools: Add support for Dove to kwboot   Sebastian Hesselbarth
• [U-Boot] [PATCH] mxs: Staticize SPL functions   Marek Vasut
• [U-Boot] [PATCH 0/4] fs:ext4:fix: Fixes for ext4write command   Lukasz Majewski
• [U-Boot] [PATCH 2/4] EXYNOS5 : FDT: Add Aliases for SPI device   Rajeshwari Birje
• [U-Boot] [PATCH 2/3] EXYNOS5: Add device node for PMIC   Rajeshwari Birje
• [U-Boot] [PATCH] mx23: Add POWER and CLKCTRL register definitions   Otavio Salvador
• [U-Boot] access u-boot environment variables from kernel space   Manukumar
• [U-Boot] [PATCH] FAT: make FAT compile without VFAT   Richard Genoud
• [U-Boot] [PATCH] mxs: SPL: Generalize memory initialization   Otavio Salvador
• [U-Boot] access u-boot environment variables from kernel space   Yegor Yefremov
• [U-Boot] [PATCH] FAT: make FAT compile without VFAT   Marek Vasut
• [U-Boot] [PATCH] FAT: make FAT compile without VFAT   Richard Genoud
• [U-Boot] [PATCH] FAT: make FAT compile without VFAT   Stefano Babic
• [U-Boot] access u-boot environment variables from kernel space   Scott Wood
• [U-Boot] access u-boot environment variables from kernel space   Steve Strobel
• [U-Boot] [PATCH v2 1/7] Tegra30: Add arch-tegra30 include files   Tom Warren
• [U-Boot] [PATCH v2 2/7] Tegra30: Add AVP (arm720t) files   Tom Warren
• [U-Boot] [PATCH 0/57] RFC: Move arch-specific global data into its own structure   Wolfgang Denk
• [U-Boot] [PATCH 0/57] RFC: Move arch-specific global data into its own structure   Wolfgang Denk
• [U-Boot] [PATCH 0/57] RFC: Move arch-specific global data into its own structure   Wolfgang Denk
• [U-Boot] [PATCH 0/57] RFC: Move arch-specific global data into its own structure   Wolfgang Denk
• [U-Boot] [PATCH 0/57] RFC: Move arch-specific global data into its own structure   Wolfgang Denk
• [U-Boot] [PATCH v2 6/7] Tegra30: Add generic Tegra30 build support   Tom Warren
• [U-Boot] [PATCH v2 7/7] Tegra30: Add/enable Cardhu build (T30 reference board)   Tom Warren
• [U-Boot] [PATCH v2 5/7] Tegra30: Cardhu: Add DT files   Tom Warren
• [U-Boot] [PATCH v2 7/7] Tegra30: Add/enable Cardhu build (T30 reference board)   Lucas Stach
• [U-Boot] [PATCH v2 7/7] Tegra30: Add/enable Cardhu build (T30 reference board)   Tom Warren
• [U-Boot] [PATCH v2 7/7] Tegra30: Add/enable Cardhu build (T30 reference board)   Stephen Warren
• [U-Boot] [PATCH v2 7/7] Tegra30: Add/enable Cardhu build (T30 reference board)   Stephen Warren
• [U-Boot] [PATCH 0/57] RFC: Move arch-specific global data into its own structure   Simon Glass
• [U-Boot] [PATCH 0/57] RFC: Move arch-specific global data into its own structure   Graeme Russ
• [U-Boot] [PATCH v4 0/20] Add environment call-back and flags capability   Joe Hershberger
• [U-Boot] [PATCH v4 01/20] Make linux kernel string funcs available to tools   Joe Hershberger
• [U-Boot] [PATCH v4 02/20] env: Refactor do_apply to a flag   Joe Hershberger
• [U-Boot] [PATCH v4 03/20] env: Consolidate common code in hsearch_r()   Joe Hershberger
• [U-Boot] [PATCH v4 04/20] env: Refactor apply into change_ok   Joe Hershberger
• [U-Boot] [PATCH v4 05/20] env: Use getenv_yesno() more generally   Joe Hershberger
• [U-Boot] [PATCH v4 06/20] env: Hide '.' variables in env print by default   Joe Hershberger
• [U-Boot] [PATCH v4 07/20] env: Add support for callbacks to environment vars   Joe Hershberger
• [U-Boot] [PATCH v4 08/20] env: Add a command to view callbacks   Joe Hershberger
• [U-Boot] [PATCH v4 09/20] env: Add a bootfile env handler   Joe Hershberger
• [U-Boot] [PATCH v4 10/20] env: Add a baudrate env handler   Joe Hershberger
• [U-Boot] [PATCH v4 11/20] env: Add a loadaddr env handler   Joe Hershberger
• [U-Boot] [PATCH v4 12/20] env: Add a console env handler   Joe Hershberger
• [U-Boot] [PATCH v4 13/20] env: Add a silent env handler   Joe Hershberger
• [U-Boot] [PATCH v4 14/20] env: Add environment variable flags   Joe Hershberger
• [U-Boot] [PATCH v4 15/20] tools/env: Add environment variable flags support   Joe Hershberger
• [U-Boot] [PATCH v4 16/20] env: Add a command to display details about env flags   Joe Hershberger
• [U-Boot] [PATCH v4 17/20] env: Add support for access control to .flags   Joe Hershberger
• [U-Boot] [PATCH v4 18/20] env: Add setenv force support   Joe Hershberger
• [U-Boot] [PATCH v4 19/20] env: Implement the env delete command   Joe Hershberger
• [U-Boot] [PATCH v4 20/20] env: Handle write-once ethaddr and serial# generically   Joe Hershberger
• [U-Boot] [PATCH v4 07/20] env: Add support for callbacks to environment vars   Graeme Russ
• [U-Boot] [PATCH] cm-t35: enable zero bootdelay check   Nikita Kiryanov
• [U-Boot] [PATCH 0/4 V2] EXYNOS5: Add FDT support to SPI   Rajeshwari Shinde
• [U-Boot] [PATCH 1/4 V2] EXYNOS5: FDT: Add compatible strings for SPI   Rajeshwari Shinde
• [U-Boot] [PATCH 2/4 V2] EXYNOS5 : FDT: Add Aliases for SPI device   Rajeshwari Shinde
• [U-Boot] [PATCH 3/4 V2] EXYNOS5: FDT: Add SPI device node data   Rajeshwari Shinde
• [U-Boot] [PATCH 4/4 V2] SPI: EXYNOS: Add FDT support to driver.   Rajeshwari Shinde
• [U-Boot] [PATCH 4/4] EXYNOS: Update pinmux to use gpio numbering   Minkyu Kang
• [U-Boot] [PATCH 2/4] S5P: GPIO: Add GPIO pin numbering to driver   Minkyu Kang
• [U-Boot] [PATCH 0/3 V2] EXYNOS5: MAX77686 add FDT support   Rajeshwari Shinde
• [U-Boot] [PATCH 1/3 V2] EXYNOS5: FDT: Add compatible strings for PMIC   Rajeshwari Shinde
• [U-Boot] [PATCH 2/3 V2] EXYNOS5: Add device node for PMIC   Rajeshwari Shinde
• [U-Boot] [PATCH 3/3 V2] PMIC: MAX77686: Add FDT Support   Rajeshwari Shinde
• [U-Boot] [PATCH 0/4] EXYNOS5: Enable dwmmc   Amar
• [U-Boot] [PATCH 1/4] MMC: DWMMC: Modified fifo size computation   Amar
• [U-Boot] [PATCH 2/4] MMC: EXYNOS: Added call back function for clock get   Amar
• [U-Boot] [PATCH 3/4] EXYNOS: CLOCK: Initialised the local variable   Amar
• [U-Boot] [PATCH 4/4] SMDK5250: Initialise and enable dwmmc channels   Amar
• [U-Boot] [PATCH 0/3] I2C designware patches   Armando Visconti
• [U-Boot] [PATCH 1/3] designware_i2c.c: Added the support for MULTI_BUS   Armando Visconti
• [U-Boot] [PATCH 2/3] designware_i2c: Added s/w generation of stop bit   Armando Visconti
• [U-Boot] [PATCH 3/3] designware_i2c: Fixed the setting of the i2c bus speed   Armando Visconti
• [U-Boot] Atheros "ART" data crc calculation   Drassal, Allan
• [U-Boot] Marvell PXA168/PXA166   Otavio Salvador
• [U-Boot] Please pull u-boot-staging/sr at denx.de   Stefan Roese
• [U-Boot] [RESEND 0/4] fs:ext4:fix: Fixes for ext4write command   Lukasz Majewski
• [U-Boot] [RESEND 1/4] fs:ext4:write: Add lldiv and do_div to perform 64-32 bits division   Lukasz Majewski
• [U-Boot] [RESEND 2/4] fs:ext4:write: Store block device descriptor in file system structure   Lukasz Majewski
• [U-Boot] [RESEND 3/4] fs:ext4:fix: Code refactoring to suppress compiler warnings   Lukasz Majewski
• [U-Boot] [RESEND 4/4] fs:ext4:write: Initialize cache aligned filename buffer   Lukasz Majewski
• [U-Boot] [RESEND 0/4] fs:ext4:fix: Fixes for ext4write command   Tom Rini
• [U-Boot] Please pull u-boot-staging/sr at denx.de   Tom Rini
• [U-Boot] [RFC] NFS issue when loading two files   Matthias Brugger
• [U-Boot] [PATCH v2 7/7] Tegra30: Add/enable Cardhu build (T30 reference board)   Tom Warren
• [U-Boot] [PATCH V2 4/7] Tegra30: Add common CPU (shared) files   Stephen Warren
• [U-Boot] [PATCH] mtd: nand: mxs: reset BCH earlier, too, to avoid NAND startup problems   Wolfram Sang
• [U-Boot] [PATCH V2 4/7] Tegra30: Add common CPU (shared) files   Tom Warren
• [U-Boot] [PATCH V2 4/7] Tegra30: Add common CPU (shared) files   Stephen Warren
• [U-Boot] [PATCH V2 4/7] Tegra30: Add common CPU (shared) files   Tom Warren
• [U-Boot] [PATCH 10/10] tools: Add support for Dove to kwboot   Daniel Stodden
• [U-Boot] [RFC] NFS issue when loading two files   Wolfgang Denk
• [U-Boot] [PATCH] mtd: nand: mxs: reset BCH earlier, too, to avoid NAND startup problems   Otavio Salvador
• [U-Boot] [PATCH] mtd: nand: mxs: reset BCH earlier, too, to avoid NAND startup problems   Fabio Estevam
• [U-Boot] [PATCH] mtd: nand: mxs: reset BCH earlier, too, to avoid NAND startup problems   Wolfram Sang
• [U-Boot] [PATCH 0/57] RFC: Move arch-specific global data into its own structure   Simon Glass
• [U-Boot] [PATCH v3 0/20] Various patches in common/   Simon Glass
• [U-Boot] [PATCH v3 01/20] Add new bootstage step for the main loop   Simon Glass
• [U-Boot] [PATCH v3 02/20] Add gettime command   Simon Glass
• [U-Boot] [PATCH v3 03/20] Add a command to read raw blocks from a partition   Simon Glass
• [U-Boot] [PATCH v3 04/20] Fix use of conditional LMB   Simon Glass
• [U-Boot] [PATCH v3 05/20] stdio: remove useless strncpy   Simon Glass
• [U-Boot] [PATCH v3 06/20] sha1: Use const where possible, and unsigned for input len   Simon Glass
• [U-Boot] [PATCH v3 07/20] sha256: Use const where possible and add watchdog function   Simon Glass
• [U-Boot] [PATCH v3 08/20] Add strcasecmp() and strncasecmp()   Simon Glass
• [U-Boot] [PATCH v3 09/20] Add generic hash API   Simon Glass
• [U-Boot] [PATCH v3 10/20] sha1sum: Use generic hash layer   Simon Glass
• [U-Boot] [PATCH v3 11/20] Add hash command to perform hashing using various algorithms   Simon Glass
• [U-Boot] [PATCH v3 12/20] edid: Library of EDID decode and print   Simon Glass
• [U-Boot] [PATCH v3 13/20] edid: Add I2C command for printing the EDID   Simon Glass
• [U-Boot] [PATCH v3 14/20] fdt: edid: Enable fdt_add_edid() function when CONFIG_LCD defined   Simon Glass
• [U-Boot] [PATCH v3 15/20] Add console command to access io space registers   Simon Glass
• [U-Boot] [PATCH v3 16/20] console: Enable function to display console info   Simon Glass
• [U-Boot] [PATCH v3 17/20] tpm: Add TPM stress test   Simon Glass
• [U-Boot] [PATCH v3 18/20] exynos: Enable hashing functions and EDID for smdk5250   Simon Glass
• [U-Boot] [PATCH v3 19/20] x86: coreboot: Enable io command   Simon Glass
• [U-Boot] [PATCH v3 20/20] x86: Add coreboot version to u-boot's version command   Simon Glass
• [U-Boot] [PATCH v2 06/23] Update time command to avoid using get_timer_masked()   Simon Glass
• [U-Boot] [PATCH v2] x86: Turn on support for EFI's GPT in the coreboot config   Simon Glass
• [U-Boot] [PATCH] x86: Fix coreboot config to boot on Chromebook   Simon Glass
• [U-Boot] [PATCH v3 15/20] Add console command to access io space registers   Fabio Estevam
• [U-Boot] [PATCH v3 15/20] Add console command to access io space registers   Vadim Bendebury
• [U-Boot] [PATCH v3 15/20] Add console command to access io space registers   Fabio Estevam
• [U-Boot] [PATCH 1/4] MMC: DWMMC: Modified fifo size computation   Jaehoon Chung
• [U-Boot] [PATCH 2/4] MMC: EXYNOS: Added call back function for clock get   Jaehoon Chung
• [U-Boot] [PATCH 3/4] EXYNOS: CLOCK: Initialised the local variable   Jaehoon Chung
• [U-Boot] [PATCH] part: check each variable for capability calculation   Huang Changming-R66093
• [U-Boot] [PATCH 4/4] SMDK5250: Initialise and enable dwmmc channels   Jaehoon Chung
• [U-Boot] [PATCH resend 0/7] mtd/st_smi: Add fixes for smi driver   Vipin Kumar
• [U-Boot] [PATCH resend 1/7] mtd/st_smi: Clear error flags while initiating a fresh write   Vipin Kumar
• [U-Boot] [PATCH resend 2/7] mtd/st_smi: Rearrange the supported devices in alphabetical order   Vipin Kumar
• [U-Boot] [PATCH resend 3/7] mtd/st_smi: Add support for Micron N25Q128 Flash   Vipin Kumar
• [U-Boot] [PATCH resend 4/7] mtd/st_smi: Avoid issuing multiple WE commands   Vipin Kumar
• [U-Boot] [PATCH resend 5/7] mtd/st_smi: Write to flash in a tight loop   Vipin Kumar
• [U-Boot] [PATCH resend 6/7] mtd/st_smi: Use page sizes respective to flash   Vipin Kumar
• [U-Boot] [PATCH resend 7/7] mtd/st_smi: Add mtd support for smi   Vipin Kumar
• [U-Boot] [PATCH resend] usbh/ehci: Increase timeout for enumeration   Vipin Kumar
• [U-Boot] [PATCH 0/3 V2] EXYNOS5: Add FDT support for USB   Rajeshwari Shinde
• [U-Boot] [PATCH 1/3 V2] EHCI: Exynos: Add fdt support   Rajeshwari Shinde
• [U-Boot] [PATCH 2/3 V2] EXYNOS5: Add devine node for USB.   Rajeshwari Shinde
• [U-Boot] [PATCH 3/3 V2] EXYNOS5: FDT: Add compatible strings for USB   Rajeshwari Shinde
• [U-Boot] [PATCH resend] sdhci: Add sdhci support for spear devices   Vipin Kumar
• [U-Boot] [PATCH resend] usbh/ehci: Increase timeout for enumeration   Igor Grinberg
• [U-Boot] [PATCH resend] spi/arm-pl022: Add support for ARM PL022 spi controller   Vipin Kumar
• [U-Boot] [PATCH resend] usbh/ehci: Increase timeout for enumeration   Vipin Kumar
• [U-Boot] [PATCH resend 1/2] net/designware: Do not select MIIPORT for RGMII interface   Vipin Kumar
• [U-Boot] [PATCH resend 2/2] net/macb: Add arch specific routine to get mdio control   Vipin Kumar
• [U-Boot] [PATCH] fsmc: Skip BBT scan for bad block management   Vipin Kumar
• [U-Boot] [RESEND 0/4] fs:ext4:fix: Fixes for ext4write command   Lukasz Majewski
• [U-Boot] [PATCH resend 0/7] mtd/st_smi: Add fixes for smi driver   Stefan Roese
• [U-Boot] [PATCH resend] usbh/ehci: Increase timeout for enumeration   Igor Grinberg
• [U-Boot] [PATCH resend 1/7] mtd/st_smi: Clear error flags while initiating a fresh write   Stefan Roese
• [U-Boot] [PATCH resend 2/7] mtd/st_smi: Rearrange the supported devices in alphabetical order   Stefan Roese
• [U-Boot] [PATCH resend 3/7] mtd/st_smi: Add support for Micron N25Q128 Flash   Stefan Roese
• [U-Boot] [PATCH resend 4/7] mtd/st_smi: Avoid issuing multiple WE commands   Stefan Roese
• [U-Boot] [PATCH resend 5/7] mtd/st_smi: Write to flash in a tight loop   Stefan Roese
• [U-Boot] [PATCH resend 6/7] mtd/st_smi: Use page sizes respective to flash   Stefan Roese
• [U-Boot] [PATCH resend 7/7] mtd/st_smi: Add mtd support for smi   Stefan Roese
• [U-Boot] [PATCH resend] spi/arm-pl022: Add support for ARM PL022 spi controller   Stefan Roese
• [U-Boot] [PATCH resend 1/7] mtd/st_smi: Clear error flags while initiating a fresh write   Vipin Kumar
• [U-Boot] [PATCH resend 0/7] mtd/st_smi: Add fixes for smi driver   Vipin Kumar
• [U-Boot] [PATCH] spi: atmel: sam9m10g45 also support WDRBT bit   Bo Shen
• [U-Boot] [PATCH resend 0/7] mtd/st_smi: Add fixes for smi driver   Stefan Roese
• [U-Boot] [PATCH resend 7/7] mtd/st_smi: Add mtd support for smi   Vipin Kumar
• [U-Boot] [PATCH v2 0/7] mtd/st_smi: Add fixes for smi driver   Vipin Kumar
• [U-Boot] [PATCH v2 1/7] mtd/st_smi: Clear error flags while initiating a fresh write   Vipin Kumar
• [U-Boot] [PATCH v2 2/7] mtd/st_smi: Rearrange the supported devices in alphabetical order   Vipin Kumar
• [U-Boot] [PATCH v2 3/7] mtd/st_smi: Add support for Micron N25Q128 Flash   Vipin Kumar
• [U-Boot] [PATCH v2 4/7] mtd/st_smi: Avoid issuing multiple WE commands   Vipin Kumar
• [U-Boot] [PATCH v2 5/7] mtd/st_smi: Write to flash in a tight loop   Vipin Kumar
• [U-Boot] [PATCH v2 6/7] mtd/st_smi: Use page sizes respective to flash   Vipin Kumar
• [U-Boot] [PATCH v2 7/7] mtd/st_smi: Add mtd support for smi   Vipin Kumar
• [U-Boot] [PATCH resend 0/7] mtd/st_smi: Add fixes for smi driver   Vipin Kumar
• [U-Boot] [PATCH resend] usbh/ehci: Increase timeout for enumeration   Vipin Kumar
• [U-Boot] [PATCH v2 0/7] mtd/st_smi: Add fixes for smi driver   Vipin Kumar
• [U-Boot] [PATCH resend] misc/crypto: Add support for C3   Vipin Kumar
• [U-Boot] [PATCH resend] armv7/ltimer: Add support for local timer on armv7 cpus   Vipin Kumar
• [U-Boot] [PATCH resend 1/2] u-boot/spl: Add u-boot-spl.img to u-boot targets   Vipin Kumar
• [U-Boot] [PATCH resend 2/2] arm/boards: Define a new config option CONFIG_BOOT_PARAMS_P   Vipin Kumar
• [U-Boot] [PATCH resend 2/2] arm/boards: Define a new config option CONFIG_BOOT_PARAMS_P   Stefan Roese
• [U-Boot] [RFC] NFS issue when loading two files   Matthias Brugger
• [U-Boot] [PATCH resend 2/2] arm/boards: Define a new config option CONFIG_BOOT_PARAMS_P   Vipin Kumar
• [U-Boot] [PATCH V2 0/5] I2C designware patches   Armando Visconti
• [U-Boot] [PATCH V2 1/5] designware_i2c.c: Added the support for MULTI_BUS   Armando Visconti
• [U-Boot] [PATCH V2 2/5] designware_i2c: Added s/w generation of stop bit   Armando Visconti
• [U-Boot] [PATCH V2 3/5] designware_i2c: Fixed the setting of the i2c bus speed   Armando Visconti
• [U-Boot] [PATCH V2 4/5] designware_i2c.h: Fixed the correct values for SCL low/high time   Armando Visconti
• [U-Boot] [PATCH V2 5/5] designware_i2c.h: Define IC_CLK only if not already defined in config file   Armando Visconti
• [U-Boot] [PATCH] mtd: nand: mxs: reset BCH earlier, too, to avoid NAND startup problems   Fabio Estevam
• [U-Boot] [PATCH] net: nfs: Fixing error when mounting with time outs   Matthias Brugger
• [U-Boot] [PATCH 10/10] tools: Add support for Dove to kwboot   Sebastian Hesselbarth
• [U-Boot] [PATCH resend 2/2] arm/boards: Define a new config option CONFIG_BOOT_PARAMS_P   Stefan Roese
• [U-Boot] [PATCH v2 1/7] mtd/st_smi: Clear error flags while initiating a fresh write   Stefan Roese
• [U-Boot] [PATCH v2 5/7] mtd/st_smi: Write to flash in a tight loop   Stefan Roese
• [U-Boot] [PATCH v2 7/7] mtd/st_smi: Add mtd support for smi   Stefan Roese
• [U-Boot] [PATCH v2 0/7] mtd/st_smi: Add fixes for smi driver   Stefan Roese
• [U-Boot] [PATCH resend] usbh/ehci: Increase timeout for enumeration   Igor Grinberg
• [U-Boot] [PATCH resend] misc/crypto: Add support for C3   Stefan Roese
• [U-Boot] [PATCH resend 1/2] u-boot/spl: Add u-boot-spl.img to u-boot targets   Stefan Roese
• [U-Boot] [PATCH] mpc5200: spl_boot.c: Change init oder to first enable printf   Stefan Roese
• [U-Boot] [PATCH] mpc5200: Add a4m2k board port   Stefan Roese
• [U-Boot] [PATCH 1/4] cfi_flash: Add manufact_match helper function   Stefan Roese
• [U-Boot] [PATCH 2/4 v2] cfi_flash: Read PPB sector protection from device for AMD/Spansion chips   Stefan Roese
• [U-Boot] [PATCH 3/4] cfi_flash: Enable PPB protection for all AMD cmdset flash chips   Stefan Roese
• [U-Boot] [PATCH 4/4] cfi_flash: Report Advanced Sector Protection (PPB) with flinfo cmd   Stefan Roese
• [U-Boot] [PATCH] 4xx: Fix PCI memory mapping on CPCI405 boards   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/master   Stefan Roese
• [U-Boot] [PATCH] spl:falcon:trats Update Trats default board configuration file to support FALCON MODE   Lukasz Majewski
• [U-Boot] [PATCH] cmd:spl:fix: Prevent from a build error on boards, which don't support FDT   Lukasz Majewski
• [U-Boot] [PATCH] cmd:spl:fix: Prevent from a build error on boards, which don't support FDT   Stefano Babic
• [U-Boot] Please pull u-boot-ppc4xx/master   Tom Rini
• [U-Boot] [PATCH resend] usbh/ehci: Increase timeout for enumeration   Marek Vasut
• [U-Boot] [PATCH 1/3 V2] EHCI: Exynos: Add fdt support   Marek Vasut
• [U-Boot] [PATCH 2/3 V2] EXYNOS5: Add devine node for USB.   Marek Vasut
• [U-Boot] [PATCH 1/3 V2] EHCI: Exynos: Add fdt support   Simon Glass
• [U-Boot] [PATCH 1/3 V2] EHCI: Exynos: Add fdt support   Marek Vasut
• [U-Boot] [PATCH 1/3 V2] EHCI: Exynos: Add fdt support   Simon Glass
• [U-Boot] [PATCH 1/3 V2] EHCI: Exynos: Add fdt support   Marek Vasut
• [U-Boot] [PATCH 10/10] tools: Add support for Dove to kwboot   Daniel Stodden
• [U-Boot] [PATCH 2/4] env_nand.c: support falling back to redundant env when writing   Scott Wood
• [U-Boot] JFFS2 seems to drop nand data with ECC corrections   Scott Wood
• [U-Boot] [PATCH] fsmc: Skip BBT scan for bad block management   Scott Wood
• [U-Boot] [PATCH 10/10] tools: Add support for Dove to kwboot   Sebastian Hesselbarth
• [U-Boot] [PATCH v4 0/7] gpt: GUID Partition Table (GPT) restoration   Tom Rini
• [U-Boot] Please pull u-boot-x86.git   Simon Glass
• [U-Boot] [PATCH 1/3] spl: Change PAD_TO to CONFIG_SPL_PAD_TO   Scott Wood
• [U-Boot] [PATCH 2/3] powerpc/mpc83xx: add support for new SPL   Scott Wood
• [U-Boot] [PATCH 3/3] powerpc/mpc83xx: convert MPC8313ERDB to new-SPL   Scott Wood
• [U-Boot] [PATCH] fsmc: Skip BBT scan for bad block management   Vipin Kumar
• [U-Boot] [PATCH v2 0/7] mtd/st_smi: Add fixes for smi driver   Vipin Kumar
• [U-Boot] [PATCH] Exynos: clock: support get_mmc_clk for exynos   Minkyu Kang
• [U-Boot] [PATCH] arm: at91sam9x5: add dataflash boot support   Bo Shen
• [U-Boot] [PATCH v2 0/3] EXYNOS: Add support for Exynos4x12   Minkyu Kang
• [U-Boot] [PATCH v2 0/3] EXYNOS: Add support for Exynos4x12   Chander Kashyap
• [U-Boot] [PATCH v2] usbh/ehci: Increase timeout for enumeration   Vipin Kumar
• [U-Boot] [PATCH 0/5 v2] Add DT based ethernet driver for SMDK5250   Minkyu Kang
• [U-Boot] [PATCH v4 0/7] gpt: GUID Partition Table (GPT) restoration   Piotr Wilczek
• [U-Boot] [PATCH resend] misc/crypto: Add support for C3   Vipin Kumar
• [U-Boot] [PATCH 2/4 v2] cfi_flash: Read PPB sector protection from device for AMD/Spansion chips   Holger Brunck
• [U-Boot] [PATCH 3/4] cfi_flash: Enable PPB protection for all AMD cmdset flash chips   Holger Brunck
• [U-Boot] [PATCH 4/4] cfi_flash: Report Advanced Sector Protection (PPB) with flinfo cmd   Holger Brunck
• [U-Boot] [PATCH resend] misc/crypto: Add support for C3   Stefan Roese
• [U-Boot] [PATCH resend 2/2] arm/boards: Define a new config option CONFIG_BOOT_PARAMS_P   Vipin Kumar
• [U-Boot] [PATCH resend 1/2] u-boot/spl: Add u-boot-spl.img to u-boot targets   Vipin Kumar
• [U-Boot] [PATCH 0/6] EXYNOS: Add support for Exynos4x10   Minkyu Kang
• [U-Boot] [PATCH v2] usbh/ehci: Increase timeout for enumeration   Igor Grinberg
• [U-Boot] [PATCH v2] usbh/ehci: Increase timeout for enumeration   Igor Grinberg
• [U-Boot] [Resend Patch v2 0/3] EXYNOS: Add support for Exynos4x12   Chander Kashyap
• [U-Boot] [Resend Patch v2 1/3] EXYNOS: EXYNOS4X12: Populate Exynos4x12 register addresses   Chander Kashyap
• [U-Boot] [Resend Patch v2 2/3] EXYNOS: EXYNOS4X12: Add clock structure for EXYNOS4X12   Chander Kashyap
• [U-Boot] [Resend Patch v2 3/3] EXYNOS: EXYNOS4X12: Add gpio structure for EXYNOS4X12   Chander Kashyap
• [U-Boot] [PATCH v2] usbh/ehci: Increase timeout for enumeration   Vipin Kumar
• [U-Boot] [PATCH resend 1/2] u-boot/spl: Add u-boot-spl.img to u-boot targets   Stefan Roese
• [U-Boot] [PATCH 01/14] smdk6400: Move smdk6400 board from Makefile to boards.cfg   Minkyu Kang
• [U-Boot] [PATCH 03/14] S3C64XX: Use readl/writel to operate uart   Minkyu Kang
• [U-Boot] [PATCH 05/14] S3C64XX: reference s5p cpu time system for s3c64xx timer   Minkyu Kang
• [U-Boot] [PATCH 09/14] S3C64XX: Change SROM init to use read/write operation   Minkyu Kang
• [U-Boot] [PATCH 2/4] env_nand.c: support falling back to redundant env when writing   Phil Sutter
• [U-Boot] [PATCH resend 1/2] u-boot/spl: Add u-boot-spl.img to u-boot targets   Vipin Kumar
• [U-Boot] [PATCH resend 1/2] u-boot/spl: Add u-boot-spl.img to u-boot targets   Stefan Roese
• [U-Boot] Problem while loading data from partition 2 with u-boot   Mittelstaedt Thomas (CM-AI/EAR-S)
• [U-Boot] [PATCH] mxs: SPL: Generalize memory initialization   Stefano Babic
• [U-Boot] [PATCH v3 1/3] apf27: add missing constant to mx27   Stefano Babic
• [U-Boot] [PATCH resend 2/2] arm/boards: Define a new config option CONFIG_BOOT_PARAMS_P   Wolfgang Denk
• [U-Boot] [PATCH v2 2/3] apf27: add support for the armadeus APF27 board   Stefano Babic
• [U-Boot] [U-Boot,1/3] lzma: update to lzma sdk 9.20   Tom Rini
• [U-Boot] part: check each variable for capability calculation   Tom Rini
• [U-Boot] Allow CONFIG_BOARD_SIZE_LIMIT to be specified in hex   Tom Rini
• [U-Boot] MAINTAINERS: Add a pointer to the custodians page.   Tom Rini
• [U-Boot] cmd_led.c: Standardize format of help and usage info.   Tom Rini
• [U-Boot] README: Explain how to generate the CHANGELOG file.   Tom Rini
• [U-Boot] [U-Boot,v2] add include/u-boot.lst to .gitignore   Tom Rini
• [U-Boot] [PATCH 1/2] MAKEALL: Fix kill_children   Tom Rini
• [U-Boot] [PATCH 2/2] MAKEALL: Add options for incremental building   Tom Rini
• [U-Boot] [PATCH v2 1/2] cbfs: Remove mention of CREDITS files   Tom Rini
• [U-Boot] [PATCH v2 2/2] cbfs: Add docbook template   Tom Rini
• [U-Boot] serial_pl011: Set RTS during initialization   Tom Rini
• [U-Boot] Change e-mail address of Luka Perkov   Tom Rini
• [U-Boot] [RESEND 0/4] fs:ext4:fix: Fixes for ext4write command   Tom Rini
• [U-Boot] Please pull u-boot-x86.git   Tom Rini
• [U-Boot] [PATCH 2/4] env_nand.c: support falling back to redundant env when writing   Phil Sutter
• [U-Boot] [PULL] : Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH 2/4] env_nand.c: support falling back to redundant env when writing   Scott Wood
• [U-Boot] [PATCH] fsmc: Skip BBT scan for bad block management   Scott Wood
• [U-Boot] [PATCH v2 6/6] MX35: add support for woodburn board   Albert ARIBAUD
• [U-Boot] [PULL] : Please pull u-boot-imx   Albert ARIBAUD
• [U-Boot] [PATCH v3 6/6] mx25pdk: Add Ethernet support   Albert ARIBAUD
• [U-Boot] [PATCH v2 6/6] MX35: add support for woodburn board   Stefano Babic
• [U-Boot] [PATCH v3 6/6] mx25pdk: Add Ethernet support   Stefano Babic
• [U-Boot] [PATCH v2 6/6] MX35: add support for woodburn board   Tom Rini
• [U-Boot] [PULL] : Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH 2/4 V2] EXYNOS5 : FDT: Add Aliases for SPI device   Simon Glass
• [U-Boot] [PATCH 3/4 V2] EXYNOS5: FDT: Add SPI device node data   Simon Glass
• [U-Boot] [PATCH 4/4 V2] SPI: EXYNOS: Add FDT support to driver.   Simon Glass
• [U-Boot] [PATCH v3 6/6] mx25pdk: Add Ethernet support   Fabio Estevam
• [U-Boot] [PATCH] EXYNOS5: Add L2 Cache Support.   Simon Glass
• [U-Boot] [PATCH] EXYNOS5: Add L2 Cache Support.   Simon Glass
• [U-Boot] [PATCH 2/3 V2] EXYNOS5: Add device node for PMIC   Simon Glass
• [U-Boot] [PATCH 3/3 V2] PMIC: MAX77686: Add FDT Support   Simon Glass
• [U-Boot] [PATCH 1/4] MMC: DWMMC: Modified fifo size computation   Simon Glass
• [U-Boot] [PATCH v3 15/20] Add console command to access io space registers   Simon Glass
• [U-Boot] [PATCH v2 7/7] Tegra30: Add/enable Cardhu build (T30 reference board)   Simon Glass
• [U-Boot] [PATCH] MIPS: constify address pointer in test_bit()   daniel.schwierzeck at gmail.com
• [U-Boot] [GIT PULL] u-boot-mips/master   Daniel Schwierzeck
• [U-Boot] [PATCH v5 1/5] exynos4: universal_C210: use software SPI   Albert ARIBAUD
• [U-Boot] Conflicting commits for seaboard USB keyboard handling   Albert ARIBAUD
• [U-Boot] Rework needed for SMDK5250 re PMIC to POWER transition   Albert ARIBAUD
• [U-Boot] [PATCH] mv-common.h: increase malloc arena to 4MiB   Andreas Bießmann
• [U-Boot] [PATCH v2 0/2] Factorize ARM startup code as mush as possible.   Sughosh Ganu
• [U-Boot] [PATCH v4 1/2] arm: move C runtime setup code in crt0.S   Sughosh Ganu
• [U-Boot] [PATCH] arm: at91sam9x5: add dataflash boot support   Andreas Bießmann
• [U-Boot] [PATCHv3 2/4] at91sam9x5: enable USB support for 9x5ek board.   Andreas Bießmann
• [U-Boot] [PATCHv3 3/4] at91sam9x5ek: regroup FAT/DOS features   Andreas Bießmann
• [U-Boot] [PATCHv3 4/4] at91sam9x5ek: add USB configuration   Andreas Bießmann
• [U-Boot] [PATCH] arm: at91sam9x5: add dataflash boot support   Andreas Bießmann
• [U-Boot] [PATCH] spi: atmel: sam9m10g45 also support WDRBT bit   Andreas Bießmann
• [U-Boot] [PULL] Please pull u-boot-atmel/master   Andreas Bießmann
• [U-Boot] [PATCH 1/4] MMC: DWMMC: Modified fifo size computation   Jaehoon Chung
• [U-Boot] [STATUS] build errors on u-boot-samsung   Minkyu Kang
• [U-Boot] [PATCH 1/4] MMC: DWMMC: Modified fifo size computation   Amarendra Reddy
• [U-Boot] [PATCH] mv-common.h: increase malloc arena to 4MiB   Prafulla Wadaskar
• [U-Boot] universal_c210: fix compiler error and compiler warning   Minkyu Kang
• [U-Boot] JFFS2 seems to drop nand data with ECC corrections   Deltour, Stephane
• [U-Boot] [STATUS] build errors on u-boot-samsung   Rajeshwari Birje
• [U-Boot] [PATCH] EXYNOS5: Add L2 Cache Support.   Rajeshwari Birje
• [U-Boot] universal_c210: fix compiler error and compiler warning   Wolfgang Denk
• [U-Boot] universal_c210: fix compiler error and compiler warning   Lukasz Majewski
• [U-Boot] [PATCH v2 00/10] Add Marvell Dove and SolidRun CuBox   Prafulla Wadaskar
• [U-Boot] universal_c210: fix compiler error and compiler warning   Minkyu Kang
• [U-Boot] Unable to Receive 1Kb of data   lokesh nijalinge
• [U-Boot] universal_c210: fix compiler error and compiler warning   Piotr Wilczek
• [U-Boot] universal_c210: fix compiler error and compiler warning   Wolfgang Denk
• [U-Boot] Unable to Receive 1Kb of data   Wolfgang Denk
• [U-Boot] U-boot : compare read and expect value   Khalid Tourabi
• [U-Boot] Unable to Receive 1Kb of data   lokesh nijalinge
• [U-Boot] [PATCH 0/2] SMDK5250: Modify MAX77686 as per the latest Implementation   Rajeshwari Shinde
• [U-Boot] [PATCH 1/2] POWER: MAX77686: Modified as per the latest Implementation   Rajeshwari Shinde
• [U-Boot] [PATCH 2/2] SMDK5250: Enable pmic MAX77686   Rajeshwari Shinde
• [U-Boot] [PATCH 0/6] EXYNOS: Add support for Exynos4x10   Piotr Wilczek
• [U-Boot] Unable to Receive 1Kb of data   Wolfgang Denk
• [U-Boot] U-boot : compare read and expect value   Wolfgang Denk
• [U-Boot] [PATCH 0/2] SMDK5250: Modify MAX77686 as per the latest Implementation   Lukasz Majewski
• [U-Boot] [PATCH 2/4] env_nand.c: support falling back to redundant env when writing   Phil Sutter
• [U-Boot] [PATCH] universal_c210: check the NULL pointer when get the PMIC   Minkyu Kang
• [U-Boot] [PATCH 0/4] sf: New flash command support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 1/4] sf: Enable prints on erase and write functions   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 2/4] sf: Add print message on flash read function   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 3/4] sf: Add configuration register writing   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 4/4] sf: Add Quad-input Page Program(32h) instruction support   Jagannadha Sutradharudu Teki
• [U-Boot] U-boot : compare read and expect value   Wolfgang Denk
• [U-Boot] [GIT PULL] u-boot-mips/master   Tom Rini
• [U-Boot] [PATCH] [nand] Implement nand_extent_skip_bad   Pantelis Antoniou
• [U-Boot] [PATCH] [DFU] Implement NAND dfu support   Pantelis Antoniou
• [U-Boot] Conflicting commits for seaboard USB keyboard handling   Tom Warren
• [U-Boot] [PATCH] m28evk/mx28evk: fix nand_update_full   Eric Bénard
• [U-Boot] [PATCH] m28evk/mx28evk: fix nand_update_full   Marek Vasut
• [U-Boot] Conflicting commits for seaboard USB keyboard handling   Tom Warren
• [U-Boot] [PATCH v2 7/7] Tegra30: Add/enable Cardhu build (T30 reference board)   Tom Warren
• [U-Boot] [PATCH v3 6/9] dfu: Send correct DFU response from composite_setup   Lukasz Majewski
• [U-Boot] JFFS2 seems to drop nand data with ECC corrections   Scott Wood
• [U-Boot] [PATCH v3 6/9] dfu: Send correct DFU response from composite_setup   Pantelis Antoniou
• [U-Boot] U-boot : compare read and expect value   Khalid Tourabi
• [U-Boot] [PATCH v2 7/7] Tegra30: Add/enable Cardhu build (T30 reference board)   Simon Glass
• [U-Boot] Conflicting commits for seaboard USB keyboard handling   Allen Martin
• [U-Boot] [PATCH v3 6/9] dfu: Send correct DFU response from composite_setup   Lukasz Majewski
• [U-Boot] [PATCH 1/4] sf: Enable prints on erase and write functions   Simon Glass
• [U-Boot] [STATUS] 'next' is now open   Tom Rini
• [U-Boot] omap3_beagle.h: Fix comment for true/false return value.   Tom Rini
• [U-Boot] Pass sdrc timing values through board_sdrc_timings structure   Tom Rini
• [U-Boot] omap3: Add a few comments to "#endif"s for readability.   Tom Rini
• [U-Boot] omap4: Add comments on some "#endif"s for readability.   Tom Rini
• [U-Boot] OMAP: Tweak omap-common/Makefile since reset.S -> reset.c   Tom Rini
• [U-Boot] [U-Boot, V2] omap: emif: configure emif only when required   Tom Rini
• [U-Boot] OMAP3 SPI : Fixed bugs related to SPI transfer   Tom Rini
• [U-Boot] [U-Boot,v0] davinci: fixed cpu reset   Tom Rini
• [U-Boot] am335x: disable internal delay for RGMII mode   Tom Rini
• [U-Boot] am335x: cpsw: make phy address configurable   Tom Rini
• [U-Boot] [U-Boot, RFC/PATCHv2] OMAP3: Remove unused PHYS_SDRAM_1_SIZE   Tom Rini
• [U-Boot] [U-Boot, V2] gpio: add gpio_is_valid() to omap_gpio API   Tom Rini
• [U-Boot] [U-Boot,1/2] omap24xx_i2c: Handle wait_for_bb error   Tom Rini
• [U-Boot] [U-Boot,2/2] power: twl6035: complain on LDO9 error   Tom Rini
• [U-Boot] cm-t35: enable zero bootdelay check   Tom Rini
• [U-Boot] [PATCH] omap3/mem.c: remove unused defines   Tom Rini
• [U-Boot] [PATCH 1/2] OMAP3: fix panel timing on the mt_ventoux board   Tom Rini
• [U-Boot] [PATCH 2/2] OMAP3: TAM3517: add macros for reading eeprom   Tom Rini
• [U-Boot] [PATCH v2 0/8] NAND support for AM33XX   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] Conflicting commits for seaboard USB keyboard handling   Tom Warren
• [U-Boot] Conflicting commits for seaboard USB keyboard handling   Tom Warren
• [U-Boot] [PATCH] [nand] Implement nand_extent_skip_bad   Scott Wood
• [U-Boot] [PATCH] m28evk/mx28evk: fix nand_update_full   Scott Wood
• [U-Boot] [PATCH v3 6/9] dfu: Send correct DFU response from composite_setup   Marek Vasut
• [U-Boot] [PATCH] [DFU] Implement NAND dfu support   Scott Wood
• [U-Boot] Question regarding "Problems with CONFIG_SYS_64BIT_LBA" in disk/part_efi.c   David Purdy
• [U-Boot] [PATCH] [DFU] Implement NAND dfu support   Tom Rini
• [U-Boot] [PATCH] mtd: nand: mxs: reset BCH earlier, too, to avoid NAND startup problems   Marek Vasut
• [U-Boot] [PATCH v2] universal_c210: check the NULL pointer when get the PMIC   Minkyu Kang
• [U-Boot] universal_c210: fix compiler error and compiler warning   Minkyu Kang
• [U-Boot] [PATCH 0/2] SMDK5250: Modify MAX77686 as per the latest Implementation   Minkyu Kang
• [U-Boot] [PATCH 1/4] sf: Enable prints on erase and write functions   Jagan Teki
• [U-Boot] [GIT PULL] u-boot-i2c/master   Heiko Schocher
• [U-Boot] [PATCH] [DFU] Implement NAND dfu support   Lukasz Majewski
• [U-Boot] [PATCH v2] universal_c210: check the NULL pointer when get the PMIC   Lukasz Majewski
• [U-Boot] [PATCH v3 6/9] dfu: Send correct DFU response from composite_setup   Lukasz Majewski
• [U-Boot] [PATCH] m28evk/mx28evk: fix nand_update_full   Eric Bénard
• [U-Boot] [PATCH] [DFU] Implement NAND dfu support   Pantelis Antoniou
• [U-Boot] [PATCH] [nand] Implement nand_extent_skip_bad   Pantelis Antoniou
• [U-Boot] [PATCH v5 0/7] gpt: GUID Partition Table (GPT) restoration   Piotr Wilczek
• [U-Boot] [PATCH v5 1/7] vsprintf:fix: Change type returned by ustrtoul   Piotr Wilczek
• [U-Boot] [PATCH v5 2/7] part:efi: Move part_efi.h file to ./include   Piotr Wilczek
• [U-Boot] [PATCH v5 3/7] gpt:doc: GPT (GUID Partition Table) documentation   Piotr Wilczek
• [U-Boot] [PATCH v5 4/7] gpt: The leXX_to_int() calls replaced with ones defined at <compiler.h>   Piotr Wilczek
• [U-Boot] [PATCH v5 5/7] gpt: Support for GPT (GUID Partition Table) restoration   Piotr Wilczek
• [U-Boot] [PATCH v5 6/7] gpt: Support for new "gpt" command   Piotr Wilczek
• [U-Boot] [PATCH v5 7/7] gpt: Enable support for GPT partition table restoration at Samsung's Trats   Piotr Wilczek
• [U-Boot] [PATCH v3 6/9] dfu: Send correct DFU response from composite_setup   Wolfgang Denk
• [U-Boot] [PATCH v2] universal_c210: check the NULL pointer when get the PMIC   Minkyu Kang
• [U-Boot] [PATCH 0/5 v3] Add DT based ethernet driver for SMDK5250   Hatim Ali
• [U-Boot] [PATCH 1/5 v3] EXYNOS5: FDT: add initial dts file for EXYNOS5250, SMDK5250   Hatim Ali
• [U-Boot] [PATCH 2/5 v3] fdt: exynos5: Add DT node definition for SROM and SMSC9215   Hatim Ali
• [U-Boot] [PATCH 3/5 v3] exynos5: Add DT based driver for SMC911X ethernet   Hatim Ali
• [U-Boot] [PATCH 4/5 v3] exynos5: config: Rename the smdk5250.h to exynos5250-dt.h   Hatim Ali
• [U-Boot] [PATCH 5/5 v3] SMDK5250: config: Add configuration file for SMDK5250 board   Hatim Ali
• [U-Boot] [PATCH 0/8 v4] Add TMU support for Exynos5250 based SMDK5250   Hatim Ali
• [U-Boot] [PATCH 1/8] EXYNOS5: FDT: Add TMU device node values   Hatim Ali
• [U-Boot] [PATCH 2/8] EXYNOS5: TMU: Add driver for Thermal Management Unit   Hatim Ali
• [U-Boot] [PATCH 3/8] EXYNOS5: Power down API for Thermal Management Unit   Hatim Ali
• [U-Boot] [PATCH 4/8] Add a poll function to monitor events   Hatim Ali
• [U-Boot] [PATCH 5/8] EXYNOS5: TMU: Add TMU status polling   Hatim Ali
• [U-Boot] [PATCH 6/8] EXYNOS5: Config: Enable support for Exynos TMU driver   Hatim Ali
• [U-Boot] [PATCH 7/8] TMU: Add u-boot command to read current temp   Hatim Ali
• [U-Boot] [PATCH 8/8] EXYNOS5: Config: Enable tmu command   Hatim Ali
• [U-Boot] [PATCH 0/5 v2] Add DT based ethernet driver for SMDK5250   Hatim Rv
• [U-Boot] [PATCH 1/5] EXYNOS5: Change parent clock of FIMD to MPLL   Ajay Kumar
• [U-Boot] [PATCH 2/5] EXYNOS5: Add pinmux for LCD   Ajay Kumar
• [U-Boot] [PATCH 3/5] video: Fix compilation dependency of exynos_dp and exynos_mipi on exynos_fb   Ajay Kumar
• [U-Boot] [PATCH 4/5] EXYNOS5: Add support for FIMD and DP   Ajay Kumar
• [U-Boot] [PATCH 5/5] video: Modify exynos_fimd driver to support LCD console.   Ajay Kumar
• [U-Boot] [PATCH v3 6/9] dfu: Send correct DFU response from composite_setup   Lukasz Majewski
• [U-Boot] please pull u-boot-samsung/resolve   Minkyu Kang
• [U-Boot] [PATCH v3 6/9] dfu: Send correct DFU response from composite_setup   Lukasz Majewski
• [U-Boot] [PATCH v3 6/9] dfu: Send correct DFU response from composite_setup   Pantelis Antoniou
• [U-Boot] [PATCH v3 6/9] dfu: Send correct DFU response from composite_setup   Robert P. J. Day
• [U-Boot] [PATCH 4/4] sf: Add Quad-input Page Program(32h) instruction support   Langer Thomas (LQDE RD ST PON SW)
• [U-Boot] [PATCH 2/4] S5P: GPIO: Add GPIO pin numbering to driver   Rajeshwari Birje
• [U-Boot] [PATCH 7/8] TMU: Add u-boot command to read current temp   Wolfgang Denk
• [U-Boot] [PATCH 4/8] Add a poll function to monitor events   Wolfgang Denk
• [U-Boot] [PATCH 2/8] EXYNOS5: TMU: Add driver for Thermal Management Unit   Wolfgang Denk
• [U-Boot] [PATCH 3/8] EXYNOS5: Power down API for Thermal Management Unit   Wolfgang Denk
• [U-Boot] [PATCH v3 6/9] dfu: Send correct DFU response from composite_setup   Tom Rini
• [U-Boot] [PATCH] mx25pdk: Adapt it for the new PMIC framework   Fabio Estevam
• [U-Boot] [PATCH] mx25pdk: Adapt it for the new PMIC framework   Stefano Babic
• [U-Boot] [PATCH v2] ARM: OMAP5: redefine arm_setup_identity_mapping   Vincent Stehlé
• [U-Boot] [PATCH v2] ARM: OMAP5: redefine arm_setup_identity_mapping   Tom Rini
• [U-Boot] [PATCH v2] ARM: OMAP5: redefine arm_setup_identity_mapping   Vincent Stehlé
• [U-Boot] [PATCH v3 1/2] ARM: cache: introduce weak arm_setup_identity_mapping   Vincent Stehlé
• [U-Boot] [PATCH v3 2/2] ARM: OMAP5: redefine arm_setup_identity_mapping   Vincent Stehlé
• [U-Boot] [PATCH] woodburn: Set gpio value in gpio_direction_output()   Fabio Estevam
• [U-Boot] [PATCH] mx25pdk: Adapt it for the new PMIC framework   Fabio Estevam
• [U-Boot] [PATCH] mx53loco: Fix PMIC name   Fabio Estevam
• [U-Boot] [PATCH] woodburn: Set gpio value in gpio_direction_output()   Stefano Babic
• [U-Boot] [PATCH] woodburn: Set gpio value in gpio_direction_output()   Stefano Babic
• [U-Boot] [PATCH] mx25pdk: Adapt it for the new PMIC framework   Stefano Babic
• [U-Boot] [PATCH v3 6/6] mx25pdk: Add Ethernet support   Fabio Estevam
• [U-Boot] [PATCH v4 0/20] Add environment call-back and flags capability   Tom Rini
• [U-Boot] [PATCH] m28evk/mx28evk: fix nand_update_full   Scott Wood
• [U-Boot] please pull u-boot-samsung/resolve   Stephen Warren
• [U-Boot] [PATCH] [nand] Implement nand_extent_skip_bad   Scott Wood
• [U-Boot] [PATCH] [nand] Implement nand_extent_skip_bad   Pantelis Antoniou
• [U-Boot] NFS time out problem   Matthias Brugger
• [U-Boot] [PATCH] net: nfs: add dynamic wait period   Matthias Brugger
• [U-Boot] [PATCH] env: Fixup typos in callback   Joe Hershberger
• [U-Boot] Conflicting commits for seaboard USB keyboard handling   Allen Martin
• [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
• [U-Boot] [PATCH v2] m28evk/mx28evk: fix nand_update_full   Eric Bénard
• [U-Boot] [PATCH] mx25pdk: Allow booting a device tree kernel   Fabio Estevam
• [U-Boot] [PATCH] [DFU] Implement NAND dfu support   Scott Wood
• [U-Boot] [PATCH] [DFU] Implement NAND dfu support   Scott Wood
• [U-Boot] patchwork delegation   Scott Wood
• [U-Boot] [PATCH] [DFU] Implement NAND dfu support   Tom Rini
• [U-Boot] patchwork delegation   Tom Rini
• [U-Boot] [PATCH 2/4] env_nand.c: support falling back to redundant env when writing   Scott Wood
• [U-Boot] [PATCH] mtd: nand: mxs: reset BCH earlier, too, to avoid NAND startup problems   Scott Wood
• [U-Boot] [PATCH v2] m28evk/mx28evk: fix nand_update_full   Scott Wood
• [U-Boot] [PATCH V3 0/7] Add support for NVIDIA Tegra30 SoC   Tom Warren
• [U-Boot] [PATCH V3 1/7] Tegra30: Add arch-tegra30 include files   Tom Warren
• [U-Boot] [PATCH V3 2/7] Tegra30: Add AVP (arm720t) files   Tom Warren
• [U-Boot] [PATCH V3 3/7] Tegra30: Add CPU (armv7) files   Tom Warren
• [U-Boot] [PATCH V3 4/7] Tegra30: Add common CPU (shared) files   Tom Warren
• [U-Boot] [PATCH V3 5/7] Tegra30: Cardhu: Add DT files   Tom Warren
• [U-Boot] [PATCH V3 6/7] Tegra30: Add generic Tegra30 build support   Tom Warren
• [U-Boot] [PATCH V3 7/7] Tegra30: Add/enable Cardhu build (T30 reference board)   Tom Warren
• [U-Boot] Pull request: u-boot-net.git master   Langer Thomas (LQDE RD ST PON SW)
• [U-Boot] [PATCH V3 1/7] Tegra30: Add arch-tegra30 include files   Stephen Warren
• [U-Boot] [PATCH V3 2/7] Tegra30: Add AVP (arm720t) files   Stephen Warren
• [U-Boot] [PATCH V3 3/7] Tegra30: Add CPU (armv7) files   Stephen Warren
• [U-Boot] [PATCH V3 4/7] Tegra30: Add common CPU (shared) files   Allen Martin
• [U-Boot] [PATCH V3 0/7] Add support for NVIDIA Tegra30 SoC   Allen Martin
• [U-Boot] [PATCH V3 0/7] Add support for NVIDIA Tegra30 SoC   Allen Martin
• [U-Boot] [PATCH v2] m28evk/mx28evk: fix nand_update_full   Marek Vasut
• [U-Boot] [PATCH V3 0/7] Add support for NVIDIA Tegra30 SoC   Allen Martin
• [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
• [U-Boot] [BUGFIX PATCH] mips: serial: Fix busted manual relocation   Joe Hershberger
• [U-Boot] [PATCH v5 0/20] Add environment call-back and flags capability   Joe Hershberger
• [U-Boot] [PATCH v5 01/20] Make linux kernel string funcs available to tools   Joe Hershberger
• [U-Boot] [PATCH v5 02/20] env: Refactor do_apply to a flag   Joe Hershberger
• [U-Boot] [PATCH v5 03/20] env: Consolidate common code in hsearch_r()   Joe Hershberger
• [U-Boot] [PATCH v5 04/20] env: Refactor apply into change_ok   Joe Hershberger
• [U-Boot] [PATCH v5 05/20] env: Use getenv_yesno() more generally   Joe Hershberger
• [U-Boot] [PATCH v5 06/20] env: Hide '.' variables in env print by default   Joe Hershberger
• [U-Boot] [PATCH v5 07/20] env: Add support for callbacks to environment vars   Joe Hershberger
• [U-Boot] [PATCH v5 08/20] env: Add a command to view callbacks   Joe Hershberger
• [U-Boot] [PATCH v5 09/20] env: Add a bootfile env handler   Joe Hershberger
• [U-Boot] [PATCH v5 10/20] env: Add a baudrate env handler   Joe Hershberger
• [U-Boot] [PATCH v5 11/20] env: Add a loadaddr env handler   Joe Hershberger
• [U-Boot] [PATCH v5 12/20] env: Add a console env handler   Joe Hershberger
• [U-Boot] [PATCH v5 13/20] env: Add a silent env handler   Joe Hershberger
• [U-Boot] [PATCH v5 14/20] env: Add environment variable flags   Joe Hershberger
• [U-Boot] [PATCH v5 15/20] tools/env: Add environment variable flags support   Joe Hershberger
• [U-Boot] [PATCH v5 16/20] env: Add a command to display details about env flags   Joe Hershberger
• [U-Boot] [PATCH v5 17/20] env: Add support for access control to .flags   Joe Hershberger
• [U-Boot] [PATCH v5 18/20] env: Add setenv force support   Joe Hershberger
• [U-Boot] [PATCH v5 19/20] env: Implement the env delete command   Joe Hershberger
• [U-Boot] [PATCH v5 20/20] env: Handle write-once ethaddr and serial# generically   Joe Hershberger
• [U-Boot] [PATCH 1/4] sf: Enable prints on erase and write functions   Simon Glass
• [U-Boot] [PATCH 2/4] sf: Add print message on flash read function   Simon Glass
• [U-Boot] [PATCH 3/4] sf: Add configuration register writing   Simon Glass
• [U-Boot] [PATCH] net: sh_eth: add support for SH7752   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 4/4] sf: Add Quad-input Page Program(32h) instruction support   Simon Glass
• [U-Boot] [PATCH] net: sh_eth: add support for SH7752   Joe Hershberger
• [U-Boot] [PATCH 0/4] Add support for SAMSUNG Exynos4 SoCs and ORIGEN_QUAD board   Jeong Hyeon Kim
• [U-Boot] [PATCH 1/4] EXYNOS4: Add pinmux support for UART   Jeong Hyeon Kim
• [U-Boot] [PATCH 2/4] EXYNOS4: Add pinmux support for I2C   Jeong Hyeon Kim
• [U-Boot] [PATCH 3/4] EXYNOS4: Add support for Exynos4x12 SoCs   Jeong Hyeon Kim
• [U-Boot] [PATCH 4/4] EXYNOS4: Add ORIGEN_QUAD board support   Jeong Hyeon Kim
• [U-Boot] One basic U-boot question   Martin Peevski
• [U-Boot] [PATCH 2/4] EXYNOS4: Add pinmux support for I2C   Heiko Schocher
• [U-Boot] [PATCH] [DFU] Implement NAND dfu support   Lukasz Majewski
• [U-Boot] [PATCH v3 1/4] Exynos5: Add clock support for SATA   Vasanth Ananthan
• [U-Boot] [PATCH v3 2/4] Exynos5: Add base addresses for SATA   Vasanth Ananthan
• [U-Boot] [PATCH v3 3/4] Drivers: block: Support for SATA in Exynos5   Vasanth Ananthan
• [U-Boot] [PATCH v3 4/4] SMDK55250: Enable SATA   Vasanth Ananthan
• [U-Boot] [PATCH v2] imls: Add support to list images in NAND device   Vipin Kumar
• [U-Boot] [PATCH v2] usbh/ehci: Increase timeout for enumeration   Vipin Kumar
• [U-Boot] [PATCH resend] sdhci: Add sdhci support for spear devices   Vipin Kumar
• [U-Boot] [PATCH resend] spi/arm-pl022: Add support for ARM PL022 spi controller   Vipin Kumar
• [U-Boot] [PATCH resend 1/2] net/designware: Do not select MIIPORT for RGMII interface   Vipin Kumar
• [U-Boot] [PATCH resend] armv7/ltimer: Add support for local timer on armv7 cpus   Vipin Kumar
• [U-Boot] [PATCH resend] sdhci: Add sdhci support for spear devices   Stefan Roese
• [U-Boot] [PATCH resend 1/2] net/designware: Do not select MIIPORT for RGMII interface   Stefan Roese
• [U-Boot] [PATCH resend] sdhci: Add sdhci support for spear devices   Jaehoon Chung
• [U-Boot] [PATCH resend] spi/arm-pl022: Add support for ARM PL022 spi controller   Stefan Roese
• [U-Boot] [PATCH 2/4] EXYNOS4: Add pinmux support for I2C   김정현
• [U-Boot] [PATCH resend] spi/arm-pl022: Add support for ARM PL022 spi controller   Vipin Kumar
• [U-Boot] [PATCH resend 2/2] net/macb: Add arch specific routine to get mdio control   Vipin Kumar
• [U-Boot] [PATCH resend 2/2] net/macb: Add arch specific routine to get mdio control   Stefan Roese
• [U-Boot] [PATCH resend] spi/arm-pl022: Add support for ARM PL022 spi controller   Armando Visconti
• [U-Boot] [PATCH resend 2/2] net/macb: Add arch specific routine to get mdio control   Vipin Kumar
• [U-Boot] [PATCH resend] spi/arm-pl022: Add support for ARM PL022 spi controller   Vipin Kumar
• [U-Boot] [PATCH v2] usbh/ehci: Increase timeout for enumeration   Marek Vasut
• [U-Boot] [PATCH resend] spi/arm-pl022: Add support for ARM PL022 spi controller   Stefan Roese
• [U-Boot] [PATCH 0/2] EXYNOS5: Add GPIO numbering feature   Rajeshwari Shinde
• [U-Boot] [PATCH 1/2] S5P: GPIO: Add generic pin mumbering API's   Rajeshwari Shinde
• [U-Boot] [PATCH 2/2] EXYNOS5: Add gpio pin numbering feature   Rajeshwari Shinde
• [U-Boot] [PATCH v2] usbh/ehci: Increase timeout for enumeration   Igor Grinberg
• [U-Boot] [PATCH v2] usbh/ehci: Increase timeout for enumeration   Vipin Kumar
• [U-Boot] [PATCH v2] spi/arm-pl022: Add support for ARM PL022 spi controller   Vipin Kumar
• [U-Boot] [BUGFIX PATCH] mips: serial: Fix busted manual relocation   Daniel Schwierzeck
• [U-Boot] [PATCH v2] spi/arm-pl022: Add support for ARM PL022 spi controller   Stefan Roese
• [U-Boot] [PATCH] MIPS: constify mips_io_port_base   Daniel Schwierzeck
• [U-Boot] [PATCH v2] mips: serial: Fix busted manual relocation   Daniel Schwierzeck
• [U-Boot] [GIT PULL] u-boot-mips/master   Daniel Schwierzeck
• [U-Boot] [PATCH v3 15/20] Add console command to access io space registers   Tom Rini
• [U-Boot] [PATCH v3 0/20] Various patches in common/   Tom Rini
• [U-Boot] [PATCH] cmd:spl:fix: Prevent from a build error on boards, which don't support FDT   Tom Rini
• [U-Boot] [GIT PULL] u-boot-i2c/master   Tom Rini
• [U-Boot] Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] [PATCH 2/2] EXYNOS5: Add gpio pin numbering feature   Kyungmin Park
• [U-Boot] [PATCH v3 0/20] Various patches in common/   Simon Glass
• [U-Boot] [GIT PULL] u-boot-mips/master   Tom Rini
• [U-Boot] [PATCH 7/8] TMU: Add u-boot command to read current temp   Simon Glass
• [U-Boot] [PATCH 3/8] EXYNOS5: Power down API for Thermal Management Unit   Simon Glass
• [U-Boot] [PATCH 2/5] EXYNOS5: Add pinmux for LCD   Kyungmin Park
• [U-Boot] [PATCH v2] spi/arm-pl022: Add support for ARM PL022 spi controller   Armando Visconti
• [U-Boot] [PATCH 4/8] Add a poll function to monitor events   Simon Glass
• [U-Boot] [PATCH 4/5 v3] exynos5: config: Rename the smdk5250.h to exynos5250-dt.h   Simon Glass
• [U-Boot] [PATCH 5/5 v3] SMDK5250: config: Add configuration file for SMDK5250 board   Simon Glass
• [U-Boot] [PATCH 1/2] POWER: MAX77686: Modified as per the latest Implementation   Simon Glass
• [U-Boot] [PATCH 2/2] SMDK5250: Enable pmic MAX77686   Simon Glass
• [U-Boot] [PATCH 1/5] EXYNOS5: Change parent clock of FIMD to MPLL   Simon Glass
• [U-Boot] [PATCH 3/5] video: Fix compilation dependency of exynos_dp and exynos_mipi on exynos_fb   Simon Glass
• [U-Boot] [PATCH 2/3] EXYNOS5: Add device node for USB.   Simon Glass
• [U-Boot] [PATCH 4/5] EXYNOS5: Add support for FIMD and DP   Simon Glass
• [U-Boot] [PATCH 1/4] sf: Enable prints on erase and write functions   Jagan Teki
• [U-Boot] [PATCH 2/4] sf: Add print message on flash read function   Jagan Teki
• [U-Boot] [PATCH 5/5] video: Modify exynos_fimd driver to support LCD console.   Simon Glass
• [U-Boot] [PATCH] sf: stmicro: add support for N25Q064   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 1/8] EXYNOS5: FDT: Add TMU device node values   Simon Glass
• [U-Boot] [PATCH V3 1/7] Tegra30: Add arch-tegra30 include files   Simon Glass
• [U-Boot] [PATCH V3 2/7] Tegra30: Add AVP (arm720t) files   Simon Glass
• [U-Boot] [PATCH 1/4] sf: Enable prints on erase and write functions   Simon Glass
• [U-Boot] [PATCH 2/2] EXYNOS5: Add gpio pin numbering feature   Simon Glass
• [U-Boot] [PATCH 1/4] sf: Enable prints on erase and write functions   Jagan Teki
• [U-Boot] [PATCH 3/4] sf: Add configuration register writing   Jagan Teki
• [U-Boot] [PATCH 1/4] sf: Enable prints on erase and write functions   Simon Glass
• [U-Boot] [PATCH 3/4] sf: Add configuration register writing   Simon Glass
• [U-Boot] [PATCH V3 4/7] Tegra30: Add common CPU (shared) files   Tom Warren
• [U-Boot] [PATCH 3/4] sf: Add configuration register writing   Jagan Teki
• [U-Boot] [PATCH V3 1/7] Tegra30: Add arch-tegra30 include files   Tom Warren
• [U-Boot] [PATCH V3 2/7] Tegra30: Add AVP (arm720t) files   Tom Warren
• [U-Boot] [PATCH 4/4] sf: Add Quad-input Page Program(32h) instruction support   Jagan Teki
• [U-Boot] [PATCH v3 6/9] dfu: Send correct DFU response from composite_setup   Marek Vasut
• [U-Boot] [PATCH v3 6/9] dfu: Send correct DFU response from composite_setup   Tom Rini
• [U-Boot] [PATCH v2] imls: Add support to list images in NAND device   Wolfgang Denk
• [U-Boot] [PATCH 7/8] TMU: Add u-boot command to read current temp   Wolfgang Denk
• [U-Boot] [PATCH 3/8] EXYNOS5: Power down API for Thermal Management Unit   Wolfgang Denk
• [U-Boot] [PATCH 4/8] Add a poll function to monitor events   Wolfgang Denk
• [U-Boot] [PATCH] powerpc/t4qds: move VSC3316 config data from t4qds.h to t4qds.c   Timur Tabi
• [U-Boot] [PATCH 4/8] Add a poll function to monitor events   Simon Glass
• [U-Boot] One basic U-boot question   Scott Wood
• [U-Boot] [PATCH v3 6/9] dfu: Send correct DFU response from composite_setup   Marek Vasut
• [U-Boot] [PATCH v3 6/9] dfu: Send correct DFU response from composite_setup   Marek Vasut
• [U-Boot] [PATCH V3 1/7] Tegra30: Add arch-tegra30 include files   Stephen Warren
• [U-Boot] Using U-Boot in a mixed licensed environment   Stephen Baker
• [U-Boot] [PATCH V3 4/7] Tegra30: Add common CPU (shared) files   Stephen Warren
• [U-Boot] [PATCH V3 4/7] Tegra30: Add common CPU (shared) files   Stephen Warren
• [U-Boot] [PATCH V3 5/7] Tegra30: Cardhu: Add DT files   Stephen Warren
• [U-Boot] [PATCH 4/8] Add a poll function to monitor events   Wolfgang Denk
• [U-Boot] [PATCH V3 6/7] Tegra30: Add generic Tegra30 build support   Stephen Warren
• [U-Boot] [PATCH V3 7/7] Tegra30: Add/enable Cardhu build (T30 reference board)   Stephen Warren
• [U-Boot] [PATCH 2/4] sf: Add print message on flash read function   Simon Glass
• [U-Boot] [PATCH 3/4] sf: Add configuration register writing   Simon Glass
• [U-Boot] [PATCH 4/4] sf: Add Quad-input Page Program(32h) instruction support   Simon Glass
• [U-Boot] [PATCH V3 0/7] Add support for NVIDIA Tegra30 SoC   Simon Glass
• [U-Boot] [PATCH v2] imls: Add support to list images in NAND device   Scott Wood
• [U-Boot] [PATCH V3 1/7] Tegra30: Add arch-tegra30 include files   Tom Warren
• [U-Boot] [PATCH V3 4/7] Tegra30: Add common CPU (shared) files   Tom Warren
• [U-Boot] [PATCH V3 5/7] Tegra30: Cardhu: Add DT files   Tom Warren
• [U-Boot] [PATCH V3 0/7] Add support for NVIDIA Tegra30 SoC   Tom Warren
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Stephen Warren
• [U-Boot] [PATCH 4/8] Add a poll function to monitor events   Simon Glass
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Simon Glass
• [U-Boot] [PATCH] net: sh_eth: add support for SH7752   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Stephen Warren
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Simon Glass
• [U-Boot] NXP lpc31xx support   Paul B. Henson
• [U-Boot] [PATCH 0/11] Various USB improvements   Simon Glass
• [U-Boot] [PATCH 01/11] usb: net: asix: Do a fast init if link already established   Simon Glass
• [U-Boot] [PATCH 02/11] usb: ehci: Add 64-bit controller support   Simon Glass
• [U-Boot] [PATCH 03/11] usb: ehci: generic PCI support   Simon Glass
• [U-Boot] [PATCH 04/11] usb: ehci: Support interrupt transfers via periodic list   Simon Glass
• [U-Boot] [PATCH 05/11] usb: ehci: Fix aliasing issue in EHCI interrupt code   Simon Glass
• [U-Boot] [PATCH 06/11] usb: ehci: Add timeout on interrupt endpoint operations   Simon Glass
• [U-Boot] [PATCH 07/11] usb: usbeth: smsc95xx: remove EEPROM loaded check   Simon Glass
• [U-Boot] [PATCH 08/11] usb: Clean up newly allocated device nodes in case of configuration failure   Simon Glass
• [U-Boot] [PATCH 09/11] usb: properly detect empty mass storage media reader   Simon Glass
• [U-Boot] [PATCH 10/11] usb: Add multiple controllers support for EHCI PCI   Simon Glass
• [U-Boot] [PATCH 11/11] x86: Enable USB features for coreboot   Simon Glass
• [U-Boot] [PATCH 2/5] EXYNOS5: Add pinmux for LCD   Minkyu Kang
• [U-Boot] [PATCH v2] imls: Add support to list images in NAND device   Vipin Kumar
• [U-Boot] [PATCH v2] imls: Add support to list images in NAND device   Vipin Kumar
• [U-Boot] [PATCH v2] usbh/ehci: Increase timeout for enumeration   Vipin Kumar
• [U-Boot] [PATCH 3/4] EXYNOS4: Add support for Exynos4x12 SoCs   Chander Kashyap
• [U-Boot] [PATCH 3/4] EXYNOS4: Add support for Exynos4x12 SoCs   Chander Kashyap
• [U-Boot] [PATCH] EXYNOS4: Add pinmux support for SROMC   Jeong-Hyeon Kim
• [U-Boot] [PATCH 3/4] EXYNOS4: Add support for Exynos4x12 SoCs   김정현
• [U-Boot] [PATCH] mx53loco: Fix PMIC name   Stefano Babic
• [U-Boot] [PATCH] mx25pdk: Allow booting a device tree kernel   Stefano Babic
• [U-Boot] [PATCH 3/4] EXYNOS4: Add support for Exynos4x12 SoCs   Chander Kashyap
• [U-Boot] [PATCH 4/8] Add a poll function to monitor events   Wolfgang Denk
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Wolfgang Denk
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Wolfgang Denk
• [U-Boot] [PATCH] EXYNOS: EXYNOS4X12: adds missed base address   Jeong-Hyeon Kim
• [U-Boot] EXYNOS4X12: Adds for ORIGEN_QUAD board   Jeong-Hyeon Kim
• [U-Boot] [PATCH v2 1/2] EXYNOS4: Add pinmux support for UART   Jeong-Hyeon Kim
• [U-Boot] [PATCH v2 2/2] EXYNOS4: Add ORIGEN_QUAD board support   Jeong-Hyeon Kim
• [U-Boot] Using U-Boot in a mixed licensed environment   Wolfgang Denk
• [U-Boot] [PATCH v3] imls: Add support to list images in NAND device   Vipin Kumar
• [U-Boot] [PATCH 0/2] clean some FAT code   Richard Genoud
• [U-Boot] [PATCH 1/2] FAT: remove ifdefs to make the code more readable   Richard Genoud
• [U-Boot] [PATCH 2/2] FAT: use toupper/tolower instead of recoding them   Richard Genoud
• [U-Boot] [PATCH v3] usbh/ehci: Increase timeout for enumeration   Vipin Kumar
• [U-Boot] [PATCH V2 0/4] Add support for FIMD and DP on SMDK5250   Ajay Kumar
• [U-Boot] [PATCH V2 1/4] EXYNOS5: Change parent clock of FIMD to MPLL   Ajay Kumar
• [U-Boot] [PATCH RESEND 2/4] video: Fix compilation dependency of exynos_dp and exynos_mipi on exynos_fb   Ajay Kumar
• [U-Boot] [PATCH V2 3/4] video: Modify exynos_fimd driver to support LCD console   Ajay Kumar
• [U-Boot] [PATCH V2 4/4] EXYNOS5: Add support for FIMD and DP   Ajay Kumar
• [U-Boot] [PATCH v3] spi/arm-pl022: Add support for ARM PL022 spi controller   Vipin Kumar
• [U-Boot] [PATCH v3] spi/arm-pl022: Add support for ARM PL022 spi controller   Stefan Roese
• [U-Boot] [PATCH v2 1/2] net/designware: Do not select MIIPORT for RGMII interface   Vipin Kumar
• [U-Boot] [PATCH v2 2/2] net/macb: Add arch specific routine to get mdio control   Vipin Kumar
• [U-Boot] [PATCH 0/2] clean some FAT code   Marek Vasut
• [U-Boot] [PATCH 1/2] FAT: remove ifdefs to make the code more readable   Marek Vasut
• [U-Boot] [PATCH 2/2] FAT: use toupper/tolower instead of recoding them   Marek Vasut
• [U-Boot] [PATCH 0/2] clean some FAT code   Richard Genoud
• [U-Boot] [PATCH 1/2] FAT: remove ifdefs to make the code more readable   Richard Genoud
• [U-Boot] [PATCH 1/2] FAT: remove ifdefs to make the code more readable   Tom Rini
• [U-Boot] [PATCH v3] usbh/ehci: Increase timeout for enumeration   Marek Vasut
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Tom Rini
• [U-Boot] [PATCH 1/2] FAT: remove ifdefs to make the code more readable   Marek Vasut
• [U-Boot] [PATCH 1/2] FAT: remove ifdefs to make the code more readable   Richard Genoud
• [U-Boot] [PATCH 1/2] FAT: remove ifdefs to make the code more readable   Richard Genoud
• [U-Boot] [PATCH 1/2] FAT: remove ifdefs to make the code more readable   Marek Vasut
• [U-Boot] [PATCHv2] FAT: remove ifdefs to make the code more readable   Richard Genoud
• [U-Boot] [PATCH 1/2] FAT: remove ifdefs to make the code more readable   Marek Vasut
• [U-Boot] [PATCH v3] spi/arm-pl022: Add support for ARM PL022 spi controller   Armando Visconti
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Wolfgang Denk
• [U-Boot] [PATCH 1/2] FAT: remove ifdefs to make the code more readable   Richard Genoud
• [U-Boot] [PATCH 1/2] FAT: remove ifdefs to make the code more readable   Tom Rini
• [U-Boot] Booting an i.MX53 from NAND with u-boot   Bernhard Walle
• [U-Boot] [PATCH 3/4] sf: Add configuration register writing   Jagan Teki
• [U-Boot] [PATCH 4/4] sf: Add Quad-input Page Program(32h) instruction support   Jagan Teki
• [U-Boot] [PATCH 01/11] usb: net: asix: Do a fast init if link already established   Marek Vasut
• [U-Boot] [PATCH 02/11] usb: ehci: Add 64-bit controller support   Marek Vasut
• [U-Boot] [PATCH 03/11] usb: ehci: generic PCI support   Marek Vasut
• [U-Boot] [PATCH 04/11] usb: ehci: Support interrupt transfers via periodic list   Marek Vasut
• [U-Boot] [PATCH 06/11] usb: ehci: Add timeout on interrupt endpoint operations   Marek Vasut
• [U-Boot] [PATCH 07/11] usb: usbeth: smsc95xx: remove EEPROM loaded check   Marek Vasut
• [U-Boot] [PATCH 08/11] usb: Clean up newly allocated device nodes in case of configuration failure   Marek Vasut
• [U-Boot] [PATCH 09/11] usb: properly detect empty mass storage media reader   Marek Vasut
• [U-Boot] [PATCH 03/11] usb: ehci: generic PCI support   Vincent Palatin
• [U-Boot] [PATCH 03/11] usb: ehci: generic PCI support   Marek Vasut
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Stephen Warren
• [U-Boot] Conflicting commits for seaboard USB keyboard handling   Albert ARIBAUD
• [U-Boot] please pull u-boot-samsung/resolve   Albert ARIBAUD
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Wolfgang Denk
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Stephen Warren
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Tom Rini
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Stephen Warren
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Simon Glass
• [U-Boot] [PATCH v2] imls: Add support to list images in NAND device   Scott Wood
• [U-Boot] [PATCH v3] imls: Add support to list images in NAND device   Scott Wood
• [U-Boot] Booting an i.MX53 from NAND with u-boot   Benoît Thébaudeau
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Wolfgang Denk
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Stephen Warren
• [U-Boot] please pull u-boot-samsung/resolve   Minkyu Kang
• [U-Boot] [PATCH 3/4] sf: Add configuration register writing   Simon Glass
• [U-Boot] [PATCH 4/4] sf: Add Quad-input Page Program(32h) instruction support   Simon Glass
• [U-Boot] [PATCH 03/11] usb: ehci: generic PCI support   Simon Glass
• [U-Boot] [PATCH 04/11] usb: ehci: Support interrupt transfers via periodic list   Simon Glass
• [U-Boot] [PATCH 04/11] usb: ehci: Support interrupt transfers via periodic list   Marek Vasut
• [U-Boot] [PATCH 06/11] usb: ehci: Add timeout on interrupt endpoint operations   Simon Glass
• [U-Boot] [PATCH 04/11] usb: ehci: Support interrupt transfers via periodic list   Simon Glass
• [U-Boot] [PATCH v2 0/7] Various USB improvements   Simon Glass
• [U-Boot] [PATCH v2 1/7] usb: net: asix: Do a fast init if link already established   Simon Glass
• [U-Boot] [PATCH v2 2/7] usb: ehci: generic PCI support   Simon Glass
• [U-Boot] [PATCH v2 3/7] usb: ehci: Support interrupt transfers via periodic list   Simon Glass
• [U-Boot] [PATCH v2 4/7] usb: ehci: Fix aliasing issue in EHCI interrupt code   Simon Glass
• [U-Boot] [PATCH v2 5/7] usb: usbeth: smsc95xx: remove EEPROM loaded check   Simon Glass
• [U-Boot] [PATCH v2 6/7] usb: Add multiple controllers support for EHCI PCI   Simon Glass
• [U-Boot] [PATCH v2 7/7] x86: Enable USB features for coreboot   Simon Glass
• [U-Boot] [PATCH] common/command.c: revert chanches from commit 199adb60   Rommel Custodio
• [U-Boot] [PATCH] mmc: sdhci: return error when failed add_sdhci().   Jaehoon Chung
• [U-Boot] [PATCH 13/57] x86: Move new_gd_addr to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 0/58] Move arch-specific global data into its own structure   Simon Glass
• [U-Boot] [PATCH v2 01/58] Add architecture-specific global data   Simon Glass
• [U-Boot] [PATCH v2 02/58] at91: Move at91 global data into arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 03/58] arm: Move timer_rate_hz into arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 04/58] arm: Move tbu to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 05/58] arm: Move tbl to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 06/58] arm: Move lastinc to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 07/58] arm: Move timer_reset_value to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 08/58] ixp: Move timestamp to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 09/58] nds32: Drop tlb_addr from global data   Simon Glass
• [U-Boot] [PATCH v2 10/58] arm: Move tlb_addr to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 11/58] x86: Remove gdt_addr from arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 12/58] x86: Move gd_addr into arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 13/58] x86: Set up the global data pointer in C instead of asm   Simon Glass
• [U-Boot] [PATCH v2 14/58] x86: Remove reset_status, relocoff from global_data   Simon Glass
• [U-Boot] [PATCH v2 15/58] ppc: Move brg_clk to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 16/58] ppc: Remove extra pci_clk fields from global_data   Simon Glass
• [U-Boot] [PATCH v2 17/58] ppc: Move clock fields to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 18/58] ppc: Move mpc83xx clock fields to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 19/58] ppc: Move lbc_clk and cpu to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 20/58] ppc: m68k: Move i2c1_clk, i2c2_clk to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 21/58] ppc: Move CONFIG_QE to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 22/58] ppc: Move used_laws to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 23/58] ppc: Move used_tlb_cams to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 24/58] ppc: Move mpc5xxx clocks to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 25/58] ppc: Move mpc512x clocks to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 26/58] ppc: Move mpc8220 clocks to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 27/58] ppc: Move reset_status to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 28/58] ppc: Move arbiter fields to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 29/58] ppc: Move dp_alloc_base, dp_alloc_top to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 30/58] arm: Move uart_clk to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 31/58] ppc: Move mirror_hack to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 32/58] ppc: Remove console_addr from global data   Simon Glass
• [U-Boot] [PATCH v2 33/58] ppc: Move fpga_state to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 34/58] ppc: Move wdt_last to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 35/58] ppc: Move kbd_status to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 36/58] ppc: arm: Move sdhc_clk into arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 37/58] sparc: Drop kbd_status and reset_status from global_data   Simon Glass
• [U-Boot] [PATCH v2 38/58] m68k: Move CONFIG_EXTRA_CLOCK to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 39/58] mips: Move per_clk and dev_clk to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 40/58] avr32: Move stack_end to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 41/58] avr32: Move cpu_hz to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 42/58] sandbox: Move ram_buf to arch_global_data   Simon Glass
• [U-Boot] [PATCH v2 43/58] Add generic global_data   Simon Glass
• [U-Boot] [PATCH v2 44/58] Only use fb_base if we have a display   Simon Glass
• [U-Boot] [PATCH v2 45/58] arm: Use generic global_data   Simon Glass
• [U-Boot] [PATCH v2 46/58] avr32: Use generic global_data   Simon Glass
• [U-Boot] [PATCH v2 47/58] blackfin: Use generic global_data   Simon Glass
• [U-Boot] [PATCH v2 48/58] m68k: Use generic global_data   Simon Glass
• [U-Boot] [PATCH v2 49/58] microblaze: Use generic global_data   Simon Glass
• [U-Boot] [PATCH v2 50/58] mips: Use generic global_data   Simon Glass
• [U-Boot] [PATCH v2 51/58] nds32: Use generic global_data   Simon Glass
• [U-Boot] [PATCH v2 52/58] nios2: Use generic global_data   Simon Glass
• [U-Boot] [PATCH v2 53/58] openrisc: Use generic global_data   Simon Glass
• [U-Boot] [PATCH v2 54/58] powerpc: Use generic global_data   Simon Glass
• [U-Boot] [PATCH v2 55/58] sandbox: Use generic global_data   Simon Glass
• [U-Boot] [PATCH v2 56/58] sh: Use generic global_data   Simon Glass
• [U-Boot] [PATCH v2 57/58] sparc: Use generic global_data   Simon Glass
• [U-Boot] [PATCH v2 58/58] x86: Use generic global_data   Simon Glass
• [U-Boot] [PATCH v3 2/7] usb: ehci: generic PCI support   Simon Glass
• [U-Boot] [PATCH] common/command.c: revert chanches from commit 199adb60   Anatolij Gustschin
• [U-Boot] [PATCH 2/3] fw_env: fix incorrect usage of open(O_CREAT)   Christian Riesch
• [U-Boot] [PATCH v2] mpc5200: Add a4m2k board port   Stefan Roese
• [U-Boot] [PATCH 2/2] FAT: use toupper/tolower instead of recoding them   Stefano Babic
• [U-Boot] [PATCH v3] imls: Add support to list images in NAND device   Vipin Kumar
• [U-Boot] [PATCH v3] usbh/ehci: Increase timeout for enumeration   Vipin Kumar
• [U-Boot] [PATCH] Exynos: clock: support get_mmc_clk for exynos   Jaehoon Chung
• [U-Boot] [PATCH v2] imls: Add support to list images in NAND device   Vipin Kumar
• [U-Boot] [PATCH resend] armv7/ltimer: Add support for local timer on armv7 cpus   Vipin Kumar
• [U-Boot] [PATCH v3] imls: Add support to list images in NAND device   Vipin Kumar
• [U-Boot] [PATCH v2 49/58] microblaze: Use generic global_data   Michal Simek
• [U-Boot] [PATCH 00/16] SMDK5250: Add FDT support   Rajeshwari Shinde
• [U-Boot] [PATCH 01/16] EXYNOS5: FDT: Add I2C device node data   Rajeshwari Shinde
• [U-Boot] [PATCH 02/16] EXYNOS5 : FDT: Add Aliases for I2C device   Rajeshwari Shinde
• [U-Boot] [PATCH 03/16] FDT: Add compatible string for I2C   Rajeshwari Shinde
• [U-Boot] [PATCH 04/16] EXYNOS5: FDT : Decode peripheral id   Rajeshwari Shinde
• [U-Boot] [PATCH 05/16] I2C: Driver changes for FDT support   Rajeshwari Shinde
• [U-Boot] [PATCH 06/16] SMDK5250: Initialise I2C using FDT   Rajeshwari Shinde
• [U-Boot] [PATCH 07/16] EXYNOS5: FDT: Add sound device node data   Rajeshwari Shinde
• [U-Boot] [PATCH 08/16] EXYNOS5: FDT: Add sound and codec device node   Rajeshwari Shinde
• [U-Boot] [PATCH 09/16] EXYNOS5: FDT: Add compatible strings for sound   Rajeshwari Shinde
• [U-Boot] [PATCH 10/16] Sound: Add FDT support to driver   Rajeshwari Shinde
• [U-Boot] [PATCH 11/16] Sound: WM8994: Add FDT support to codec   Rajeshwari Shinde
• [U-Boot] [PATCH 12/16] Sound: Add FDT support to CMD.   Rajeshwari Shinde
• [U-Boot] [PATCH 13/16] EXYNOS5: FDT: Add compatible strings for SPI   Rajeshwari Shinde
• [U-Boot] [PATCH 14/16] EXYNOS5 : FDT: Add Aliases for SPI device   Rajeshwari Shinde
• [U-Boot] [PATCH 15/16] EXYNOS5: FDT: Add SPI device node data   Rajeshwari Shinde
• [U-Boot] [PATCH 16/16] SPI: EXYNOS: Add FDT support to driver.   Rajeshwari Shinde
• [U-Boot] [PATCH v2 08/58] ixp: Move timestamp to arch_global_data   Marek Vasut
• [U-Boot] Booting an i.MX53 from NAND with u-boot   Benoît Thébaudeau
• [U-Boot] [PATCH v5 0/7] gpt: GUID Partition Table (GPT) restoration   Tom Rini
• [U-Boot] [PATCH v5 0/20] Add environment call-back and flags capability   Tom Rini
• [U-Boot] [PATCH] powerpc/mpc85xx: Reserve default boot page   York Sun
• [U-Boot] [PATCH v2 49/58] microblaze: Use generic global_data   Simon Glass
• [U-Boot] Conflicting commits for seaboard USB keyboard handling   Tom Warren
• [U-Boot] UBI Fixable bit-flip issue.   Vikram Narayanan
• [U-Boot] [PATCH v3] imls: Add support to list images in NAND device   Scott Wood
• [U-Boot] [PATCH v2] imls: Add support to list images in NAND device   Scott Wood
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Tom Rini
• [U-Boot] [PATCH 01/10] x86: Add function to get top of usable ram   Simon Glass
• [U-Boot] [PATCH 02/10] x86: Add basic cache operations   Simon Glass
• [U-Boot] [PATCH 03/10] x86: Permit bootstage and timer data to be used prior to relocation   Simon Glass
• [U-Boot] [PATCH 04/10] x86: Add an __end symbol to signal the end of the U-Boot binary   Simon Glass
• [U-Boot] [PATCH 05/10] x86: Rearrange the output input to remove BSS   Simon Glass
• [U-Boot] [PATCH 06/10] x86: Support relocation of FDT on start-up   Simon Glass
• [U-Boot] [PATCH 07/10] x86: Add error checking to x86 relocation code   Simon Glass
• [U-Boot] [PATCH 08/10] x86: Adjust link device tree include file   Simon Glass
• [U-Boot] [PATCH 09/10] x86: Enable CONFIG_OF_CONTROL on coreboot   Simon Glass
• [U-Boot] [PATCH 10/10] x86: Remove real mode code for coreboot   Simon Glass
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Simon Glass
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Stephen Warren
• [U-Boot] [STATUS] v2013.01-rc2 released   Tom Rini
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Stephen Warren
• [U-Boot] Pull request: nand flash   Scott Wood
• [U-Boot] [PATCH 03/10] x86: Permit bootstage and timer data to be used prior to relocation   Graeme Russ
• [U-Boot] [PATCH resend] armv7/ltimer: Add support for local timer on armv7 cpus   Wolfgang Denk
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Simon Glass
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Wolfgang Denk
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Wolfgang Denk
• [U-Boot] [PATCH v2 12/58] x86: Move gd_addr into arch_global_data   Graeme Russ
• [U-Boot] [PATCH 03/10] x86: Permit bootstage and timer data to be used prior to relocation   Simon Glass
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Wolfgang Denk
• [U-Boot] [PATCH v2 13/58] x86: Set up the global data pointer in C instead of asm   Graeme Russ
• [U-Boot] [PATCH V2 3/4] video: Modify exynos_fimd driver to support LCD console   Simon Glass
• [U-Boot] [PATCH v2 12/58] x86: Move gd_addr into arch_global_data   Simon Glass
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Stephen Warren
• [U-Boot] [PATCH v3 19/20] x86: coreboot: Enable io command   Simon Glass
• [U-Boot] [PATCH v3 20/20] x86: Add coreboot version to u-boot's version command   Simon Glass
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Graeme Russ
• [U-Boot] [PATCH] x86: Add mention of the new io command in README   Simon Glass
• [U-Boot] Atheros "ART" data crc calculation   Dmytro
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Wolfgang Denk
• [U-Boot] [PATCH] env: don't generate callback list entries for SPL   Scott Wood
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Graeme Russ
• [U-Boot] UBI Fixable bit-flip issue.   Vikram Narayanan
• [U-Boot] [PATCH V2 1/4] EXYNOS5: Change parent clock of FIMD to MPLL   Minkyu Kang
• [U-Boot] [PATCH V2 4/4] EXYNOS5: Add support for FIMD and DP   Minkyu Kang
• [U-Boot] [PATCH RESEND 2/4] video: Fix compilation dependency of exynos_dp and exynos_mipi on exynos_fb   Minkyu Kang
• [U-Boot] [PATCH v2 2/2] EXYNOS4: Add ORIGEN_QUAD board support   Minkyu Kang
• [U-Boot] [PATCH] env: don't generate callback list entries for SPL   Joe Hershberger
• [U-Boot] [PATCH 01/11] usb: net: asix: Do a fast init if link already established   Joe Hershberger
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Wolfgang Denk
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Graeme Russ
• [U-Boot] please pull u-boot-samsung/resolve   Albert ARIBAUD
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] Conflicting commits for seaboard USB keyboard handling   Albert ARIBAUD
• [U-Boot] [STATUS] v2013.01-rc2 released   Simon Glass
• [U-Boot] [PATCH v2] mmc: Split device init to decouple OCR-polling delay   Simon Glass
• [U-Boot] [PATCH 2/3] fw_env: fix incorrect usage of open(O_CREAT)   Joe Hershberger
• [U-Boot] [PATCH 1/3] fw_env: fix type of len   Joe Hershberger
• [U-Boot] [PATCH 3/3] fw_env: fix building w/out a config.h   Joe Hershberger
• [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
• [U-Boot] [PATCH v2 1/8] patman: Use ANSI colours only when outputting to a terminal   Simon Glass
• [U-Boot] [PATCH v2 2/8] patman: Use bright ANSI colours by default   Simon Glass
• [U-Boot] [PATCH v2 3/8] patman: Add cros_subprocess library to manage subprocesses   Simon Glass
• [U-Boot] [PATCH v2 4/8] patman: Make command methods return a CommandResult   Simon Glass
• [U-Boot] [PATCH v2 5/8] patman: Allow commands to raise on error, or not   Simon Glass
• [U-Boot] [PATCH v2 6/8] patman: Allow reading metadata from a list of commits   Simon Glass
• [U-Boot] [PATCH v2 7/8] patman: Add additional git utilties   Simon Glass
• [U-Boot] [PATCH v2 8/8] buildman - U-Boot multi-threaded builder and summary tool   Simon Glass
• [U-Boot] Atheros "ART" data crc calculation   Drassal, Allan
• [U-Boot] Atheros "ART" data crc calculation   Drassal, Allan
• [U-Boot] [PATCH resend] armv7/ltimer: Add support for local timer on armv7 cpus   Dennis Lan (dlan)
• [U-Boot] [PATCH] i2c: mxs: Staticize the functions in the driver   Marek Vasut
• [U-Boot] Atheros "ART" data crc calculation   Dmytro
• [U-Boot] [PATCH RESEND 2/4] video: Fix compilation dependency of exynos_dp and exynos_mipi on exynos_fb   Donghwa Lee
• [U-Boot] [PATCH V2 1/4] EXYNOS5: Change parent clock of FIMD to MPLL   Donghwa Lee
• [U-Boot] [PATCH] input: Add MELFAS mms144 touchscreen driver   Donghwa Lee
• [U-Boot] [PATCH v2] mmc: Split device init to decouple OCR-polling delay   Jaehoon Chung
• [U-Boot] [PATCH v2] mmc: Split device init to decouple OCR-polling delay   Simon Glass
• [U-Boot] [PATCH resend] armv7/ltimer: Add support for local timer on armv7 cpus   Vipin Kumar
• [U-Boot] [PATCH v2 2/2] EXYNOS4: Add ORIGEN_QUAD board support   Jeong-Hyeon Kim
• [U-Boot] [PATCH 4/4] sf: Add Quad-input Page Program(32h) instruction support   Jagan Teki
• [U-Boot] [PATCH resend 2/2] arm/boards: Define a new config option CONFIG_BOOT_PARAMS_P   Vipin Kumar
• [U-Boot] [STATUS] v2013.01-rc2 released   Christian Riesch
• [U-Boot] [PATCH v2] imls: Add support to list images in NAND device   Vipin Kumar
• [U-Boot] [PATCH v4] imls: Add support to list images in NAND device   Vipin Kumar
• [U-Boot] UBI Fixable bit-flip issue.   Holger Brunck
• [U-Boot] [PATCH] usb/host/ehci: Add support for EHCI on spear   Vipin Kumar
• [U-Boot] [PATCH] usbtty: adapt buffers for large packet support   Vipin Kumar
• [U-Boot] [STATUS] v2013.01-rc2 released   Jens Scharsig
• [U-Boot] [PATCH resend] armv7/ltimer: Add support for local timer on armv7 cpus   Armando Visconti
• [U-Boot] [PULL] u-boot-usb/master   Lukasz Majewski
• [U-Boot] [PULL] u-boot-usb/master   Pantelis Antoniou
• [U-Boot] [PATCH 0/9] EXYNOS5: Enable dwmmc   Amar
• [U-Boot] [PATCH 1/9] FDT: Add compatible string for DWMMC   Amar
• [U-Boot] [PATCH 2/9] EXYNOS5: FDT: Add DWMMC device node data   Amar
• [U-Boot] [PATCH 4/9] EXYNOS5: DWMMC: Added dt support for DWMMC   Amar
• [U-Boot] [PATCH 5/9] EXYNOS5: DWMMC: API to set mmc clock divisor   Amar
• [U-Boot] [PATCH 6/9] SMDK5250: Enable DWMMC   Amar
• [U-Boot] [PATCH 7/9] MMC: APIs to support creation of boot partition   Amar
• [U-Boot] [PATCH 8/9] SMDK5250: Enable eMMC booting   Amar
• [U-Boot] [PATCH 9/9] COMMON: MMC: Command to support eMMC booting   Amar
• [U-Boot] [PATCH 1/4] arm/km: fix memory settings   Holger Brunck
• [U-Boot] [PATCH 1/4] arm/km: fix memory settings   Prafulla Wadaskar
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PATCH 05/10] dfu: Only perform DFU board_usb_init() for TRATS   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Pantelis Antoniou
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH] usb/host/ehci: Add support for EHCI on spear   Marek Vasut
• [U-Boot] [PATCH] env: don't generate callback list entries for SPL   Tom Rini
• [U-Boot] please pull u-boot-samsung/resolve   Minkyu Kang
• [U-Boot] [PATCH] input: Add MELFAS mms144 touchscreen driver   Wolfgang Denk
• [U-Boot] [PULL] u-boot-usb/master   Lukasz Majewski
• [U-Boot] [PATCH 05/10] dfu: Only perform DFU board_usb_init() for TRATS   Lukasz Majewski
• [U-Boot] [PATCH 05/10] dfu: Only perform DFU board_usb_init() for TRATS   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Pantelis Antoniou
• [U-Boot] [PATCH resend] armv7/ltimer: Add support for local timer on armv7 cpus   Wolfgang Denk
• [U-Boot] [PATCH resend] armv7/ltimer: Add support for local timer on armv7 cpus   Wolfgang Denk
• [U-Boot] UBI Fixable bit-flip issue.   Vikram Narayanan
• [U-Boot] [PATCH] env: don't generate callback list entries for SPL   Scott Wood
• [U-Boot] [PATCH] env: don't generate callback list entries for SPL   Tom Rini
• [U-Boot] [PATCH] env: don't generate callback list entries for SPL   Wolfgang Denk
• [U-Boot] [PATCH] env: don't generate callback list entries for SPL   Tom Rini
• [U-Boot] [PATCH] env: don't generate callback list entries for SPL   Joe Hershberger
• [U-Boot] [PATCH v2 08/58] ixp: Move timestamp to arch_global_data   Simon Glass
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Tom Rini
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Tom Rini
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Tom Rini
• [U-Boot] Conflicting commits for seaboard USB keyboard handling   Tom Warren
• [U-Boot] Conflicting commits for seaboard USB keyboard handling   Allen Martin
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Stephen Warren
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Wolfgang Denk
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Stephen Warren
• [U-Boot] [PATCH v3] imls: Add support to list images in NAND device   Scott Wood
• [U-Boot] [PATCH resend] armv7/ltimer: Add support for local timer on armv7 cpus   Vipin Kumar
• [U-Boot] [PATCH v3] imls: Add support to list images in NAND device   Vipin Kumar
• [U-Boot] RFC: Secure boot framework   Fernandes, Joel A
• [U-Boot] LPC3250 NAND controller timings   Александр Карпич
• [U-Boot] [PATCH] net/phy: fix select line for TN80xx   Shaohui Xie
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Wolfgang Denk
• [U-Boot] RFC: Secure boot framework   Simon Glass
• [U-Boot] [PATCH 0/7] omap mmc: implement card detect and write protection   Nikita Kiryanov
• [U-Boot] [PATCH] input: Add MELFAS mms144 touchscreen driver   Donghwa Lee
• [U-Boot] [PATCH] input: Add MELFAS mms144 touchscreen driver   Wolfgang Denk
• [U-Boot] [PATCH] board/T4240qds:Fix TLB and LAW size of NAND flash   Prabhakar Kushwaha
• [U-Boot] [PATCH] boards/T4240qds:Fix IFC AMASK init as per FPGA register space   Prabhakar Kushwaha
• [U-Boot] [PULL] u-boot-usb/master   Lukasz Majewski
• [U-Boot] [PULL] u-boot-usb/master   Pantelis Antoniou
• [U-Boot] configuring U-Boot for custom board based on at91rm9200ek   arivendu bhardwaj
• [U-Boot] [u-boot-release] [PATCH] boards/T4240qds:Fix IFC AMASK init as per FPGA register space   Timur Tabi
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Stephen Warren
• [U-Boot] configuring U-Boot for custom board based on at91rm9200ek   Andreas Bießmann
• [U-Boot] Conflicting commits for seaboard USB keyboard handling   Tom Warren
• [U-Boot] Conflicting commits for seaboard USB keyboard handling   Allen Martin
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH] usbtty: adapt buffers for large packet support   Marek Vasut
• [U-Boot] [PATCH] ns16550: allow UART address to be set dynamically   Simon Glass
• [U-Boot] Pull request: nand flash   Tom Rini
• [U-Boot] Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] [PATCH] NAND: allow custom SW ECC when using nand plat driver   Chris Kiick
• [U-Boot] [PATCH 4/7] omap_hsmmc: implement driver check for card detection   Tom Rini
• [U-Boot] Conflicting commits for seaboard USB keyboard handling   Tom Warren
• [U-Boot] Conflicting commits for seaboard USB keyboard handling   Allen Martin
• [U-Boot] [PATCH 03/10] x86: Permit bootstage and timer data to be used prior to relocation   Simon Glass
• [U-Boot] [u-boot-release] [PATCH] boards/T4240qds:Fix IFC AMASK init as per FPGA register space   Prabhakar Kushwaha
• [U-Boot] [PATCH][v2] boards/T4240qds:Fix IFC AMASK init as per FPGA register space   Prabhakar Kushwaha
• [U-Boot] Conflicting commits for seaboard USB keyboard handling   Stephen Warren
• [U-Boot] [PATCH v2 3/7] usb: ehci: Support interrupt transfers via periodic list   Jim Lin
• [U-Boot] [PATCH 4/7] omap_hsmmc: implement driver check for card detection   Nikita Kiryanov
• [U-Boot] u-boot Makefile Questions   chuck huang
• [U-Boot] Bricked when trying to attach UBI   Luca Ceresoli
• [U-Boot] [PATCH 4/4] sf: Add Quad-input Page Program(32h) instruction support   Jagan Teki
• [U-Boot] configuring u-boot for custom board based on beaglebone(am335xx_evm)   Pavan
• [U-Boot] configuring u-boot for custom board based on beaglebone(am335xx_evm)   Yegor Yefremov
• [U-Boot] configuring u-boot for custom board based on beaglebone(am335xx_evm)   Pavan
• [U-Boot] Bricked when trying to attach UBI   Andreas Bießmann
• [U-Boot] split nand writes   Jaap de Jong
• [U-Boot] Bricked when trying to attach UBI   Luca Ceresoli
• [U-Boot] Bricked when trying to attach UBI   Andreas Bießmann
• [U-Boot] [U-Boot, v2 1/6] cmd_sf: Add print messages on flash erase command   Jagannadha Sutradharudu Teki
• [U-Boot] [U-Boot, v2 2/6] cmd_sf: Add print messages on flash read/write commands   Jagannadha Sutradharudu Teki
• [U-Boot] [U-Boot,v2 3/6] sf: Add status register reading support   Jagannadha Sutradharudu Teki
• [U-Boot] [U-Boot, v2 4/6] sf: Add configuration register writing support   Jagannadha Sutradharudu Teki
• [U-Boot] [U-Boot,v2 5/6] sf: Add config register reading support   Jagannadha Sutradharudu Teki
• [U-Boot] [U-Boot,v2 6/6] sf: Set QUAD enable bit support   Jagannadha Sutradharudu Teki
• [U-Boot] please pull u-boot-samsung/resolve   Albert ARIBAUD
• [U-Boot] Bricked when trying to attach UBI   Vikram Narayanan
• [U-Boot] Bricked when trying to attach UBI   Luca Ceresoli
• [U-Boot] Bricked when trying to attach UBI   Stefan Roese
• [U-Boot] Bricked when trying to attach UBI   Vikram Narayanan
• [U-Boot] Bricked when trying to attach UBI   Vikram Narayanan
• [U-Boot] [PATCH] NAND: allow custom SW ECC when using nand plat driver   Scott Wood
• [U-Boot] Conflicting commits for seaboard USB keyboard handling   Albert ARIBAUD
• [U-Boot] [U-Boot, 1/2] spi: Add progress percentage and write speed to `sf update`   Tom Rini
• [U-Boot] [U-Boot, 1/2] spi: Add progress percentage and write speed to `sf update`   Simon Glass
• [U-Boot] [U-Boot, 1/2] spi: Add progress percentage and write speed to `sf update`   Tom Rini
• [U-Boot] Conflicting commits for seaboard USB keyboard handling   Allen Martin
• [U-Boot] [PATCH] NAND: allow custom SW ECC when using nand plat driver   Chris Kiick
• [U-Boot] [PATCH 03/10] x86: Permit bootstage and timer data to be used prior to relocation   Graeme Russ
• [U-Boot] [PATCH] NAND: allow custom SW ECC when using nand plat driver   Scott Wood
• [U-Boot] [PATCH] NAND: allow custom SW ECC when using nand plat driver   Scott Wood
• [U-Boot] [PATCH 03/10] x86: Permit bootstage and timer data to be used prior to relocation   Simon Glass
• [U-Boot] Conflicting commits for seaboard USB keyboard handling   Albert ARIBAUD
• [U-Boot] split nand writes   Scott Wood
• [U-Boot] coldfire: eb_cpu5282: fix: boot from internal flash   Tom Rini
• [U-Boot] [U-Boot, 1/2] spi: Add progress percentage and write speed to `sf update`   Tom Rini
• [U-Boot] [U-Boot,v2,2/2] spi: Add SPI flash test   Tom Rini
• [U-Boot] [U-Boot,v2] Add a simple load option to setexpr   Tom Rini
• [U-Boot] [U-Boot,1/3] fw_env: fix type of len   Tom Rini
• [U-Boot] [PATCH 1/2] spi: Add progress percentage and write speed to `sf update`   Wolfgang Denk
• [U-Boot] [PATCH 2/2] spi: Add SPI flash test   Wolfgang Denk
• [U-Boot] [U-Boot, 1/2] spi: Add progress percentage and write speed to `sf update`   Wolfgang Denk
• [U-Boot] [U-Boot, v2 1/6] cmd_sf: Add print messages on flash erase command   Wolfgang Denk
• [U-Boot] [U-Boot, v2 2/6] cmd_sf: Add print messages on flash read/write commands   Wolfgang Denk
• [U-Boot] [U-Boot,v2,2/2] spi: Add SPI flash test   Wolfgang Denk
• [U-Boot] [PATCH 1/2] spi: Add progress percentage and write speed to `sf update`   Simon Glass
• [U-Boot] [PATCH 1/2] spi: Add progress percentage and write speed to `sf update`   Scott Wood
• [U-Boot] [PATCH 1/3] spl: Change PAD_TO to CONFIG_SPL_PAD_TO   Kim Phillips
• [U-Boot] Conflicting commits for seaboard USB keyboard handling   Allen Martin
• [U-Boot] [U-Boot, 1/2] spi: Add progress percentage and write speed to `sf update`   Tom Rini
• [U-Boot] [U-Boot,v2,2/2] spi: Add SPI flash test   Tom Rini
• [U-Boot] configuring u-boot for custom board based on beaglebone(am335xx_evm)   Tom Rini
• [U-Boot] [U-Boot, 1/2] spi: Add progress percentage and write speed to `sf update`   Simon Glass
• [U-Boot] [PATCH 1/9] FDT: Add compatible string for DWMMC   Simon Glass
• [U-Boot] [PATCH 2/9] EXYNOS5: FDT: Add DWMMC device node data   Simon Glass
• [U-Boot] [PATCH 4/9] EXYNOS5: DWMMC: Added dt support for DWMMC   Simon Glass
• [U-Boot] [PATCH 5/9] EXYNOS5: DWMMC: API to set mmc clock divisor   Simon Glass
• [U-Boot] [PATCH 6/9] SMDK5250: Enable DWMMC   Simon Glass
• [U-Boot] [PATCH 7/9] MMC: APIs to support creation of boot partition   Simon Glass
• [U-Boot] [PATCH 8/9] SMDK5250: Enable eMMC booting   Simon Glass
• [U-Boot] [PATCH 9/9] COMMON: MMC: Command to support eMMC booting   Simon Glass
• [U-Boot] [PATCH] powerpc/t4240qds: Update IFC timing for NOR flash   Prabhakar Kushwaha
• [U-Boot] Pull request: u-boot-sh/master   Nobuhiro Iwamatsu
• [U-Boot] [U-Boot,1/3] fw_env: fix type of len   Joe Hershberger
• [U-Boot] please pull u-boot-samsung/resolve   Minkyu Kang
• [U-Boot] [PATCH 1/2] spi: Add progress percentage and write speed to `sf update`   Wolfgang Denk
• [U-Boot] please pull u-boot-samsung/resolve   Stephen Warren
• [U-Boot] [PATCH 1/4] arm/km: fix memory settings   Prafulla Wadaskar
• [U-Boot] [PATCH 2/4] km/common: drop unneeded std* environment variables   Prafulla Wadaskar
• [U-Boot] [PATCH 3/4] km/common: cosmetic change reported from checkpatch   Prafulla Wadaskar
• [U-Boot] [PATCH 4/4] arm/km: remove duplicate code   Prafulla Wadaskar
• [U-Boot] [PATCH 1/4] Optimized nand_read_buf for kirkwood   Prafulla Wadaskar
• [U-Boot] [PATCH v5 0/3] Add support for the LaCie Wireless Space   Prafulla Wadaskar
• [U-Boot] Pull request for u-boot-marvell.git   Prafulla Wadaskar
• [U-Boot] [U-Boot, v2 1/6] cmd_sf: Add print messages on flash erase command   Jagan Teki
• [U-Boot] [U-Boot, v2 2/6] cmd_sf: Add print messages on flash read/write commands   Jagan Teki
• [U-Boot] [PATCH v3 1/2] EXYNOS4: Add pinmux support for UART   Jeong-Hyeon Kim
• [U-Boot] [PATCH v3 2/2] EXYNOS4: Add ORIGEN_QUAD board support   Jeong-Hyeon Kim
• [U-Boot] [PATCH] mv-common.h: increase malloc arena to 4MiB   Prafulla Wadaskar
• [U-Boot] [PATCH] mv-common.h: increase malloc arena to 4MiB   Andreas Bießmann
• [U-Boot] [PATCH] mv-common.h: increase malloc arena to 4MiB   Prafulla Wadaskar
• [U-Boot] Pull request for u-boot-marvell.git   Prafulla Wadaskar
• [U-Boot] [PATCH] lcd: restore ability to display 8 bpp BMPs on 16 bpp LCDs   Nikita Kiryanov
• [U-Boot] [PATCH 1/4] Optimized nand_read_buf for kirkwood   Phil Sutter
• [U-Boot] configuring u-boot for custom board based on beaglebone(am335xx_evm)   Pavan
• [U-Boot] please pull u-boot-samsung/resolve   Albert ARIBAUD
• [U-Boot] [PATCH V3 0/4] Add support for FIMD and DP on SMDK5250   Ajay Kumar
• [U-Boot] [PATCH RESEND V2 1/4] EXYNOS5: Change parent clock of FIMD to MPLL   Ajay Kumar
• [U-Boot] [PATCH V3 2/4] EXYNOS: Add dummy definition to fix compilation dependency on CONFIG_EXYNOS_MIPI_DSIM   Ajay Kumar
• [U-Boot] [PATCH V3 3/4] video: Modify exynos_fimd driver to support LCD console   Ajay Kumar
• [U-Boot] [PATCH V3 4/4] EXYNOS5: Add support for FIMD and DP   Ajay Kumar
• [U-Boot] split nand writes   Jaap de Jong
• [U-Boot] Bricked when trying to attach UBI   Holger Brunck
• [U-Boot] [U-Boot, v2 1/6] cmd_sf: Add print messages on flash erase command   Wolfgang Denk
• [U-Boot] [PATCH 9/9] COMMON: MMC: Command to support eMMC booting   Amarendra Reddy
• [U-Boot] [PATCH 8/9] SMDK5250: Enable eMMC booting   Amarendra Reddy
• [U-Boot] [PATCH 7/9] MMC: APIs to support creation of boot partition   Amarendra Reddy
• [U-Boot] [U-Boot,1/3] fw_env: fix type of len   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [U-Boot, 1/2] spi: Add progress percentage and write speed to `sf update`   Tom Rini
• [U-Boot] [PATCH] NAND: allow custom SW ECC when using nand plat driver   Chris Kiick
• [U-Boot] Bricked when trying to attach UBI   Luca Ceresoli
• [U-Boot] Conflicting commits for seaboard USB keyboard handling   Tom Warren
• [U-Boot] Pull request: u-boot-sh/master   Tom Rini
• [U-Boot] i.mx53 NFC support   Mark Roy
• [U-Boot] i.mx53 NFC support   Benoît Thébaudeau
• [U-Boot] [PATCH V3 2/4] EXYNOS: Add dummy definition to fix compilation dependency on CONFIG_EXYNOS_MIPI_DSIM   Simon Glass
• [U-Boot] [PATCH V3 3/4] video: Modify exynos_fimd driver to support LCD console   Simon Glass
• [U-Boot] [PATCH V3 4/4] EXYNOS5: Add support for FIMD and DP   Simon Glass
• [U-Boot] [PATCH 2/4] env_nand.c: support falling back to redundant env when writing   Phil Sutter
• [U-Boot] [PATCH 2/4] env_nand.c: support falling back to redundant env when writing   Scott Wood
• [U-Boot] [PATCH v2] env: don't generate callback list entries for SPL   Scott Wood
• [U-Boot] [PATCH] mx53loco: Fix PMIC name   Robert Nelson
• [U-Boot] [PATCH v2] env: don't generate callback list entries for SPL   Kim Phillips
• [U-Boot] split nand writes   Scott Wood
• [U-Boot] [PATCH] NAND: allow custom SW ECC when using nand plat driver   Scott Wood
• [U-Boot] no mtdparted from U-Boot> prompt   johns at msli.com
• [U-Boot] RFC: Secure boot framework   Fernandes, Joel A
• [U-Boot] [PATCH RESEND V2 1/4] EXYNOS5: Change parent clock of FIMD to MPLL   Donghwa Lee
• [U-Boot] [PATCH V3 2/4] EXYNOS: Add dummy definition to fix compilation dependency on CONFIG_EXYNOS_MIPI_DSIM   Donghwa Lee
• [U-Boot] [PATCH V3 3/4] video: Modify exynos_fimd driver to support LCD console   Donghwa Lee
• [U-Boot] [PATCH v2 1/7] usb: net: asix: Do a fast init if link already established   Joe Hershberger
• [U-Boot] [PATCH v2 5/7] usb: usbeth: smsc95xx: remove EEPROM loaded check   Joe Hershberger
• [U-Boot] [PATCH V3 3/4] video: Modify exynos_fimd driver to support LCD console   Minkyu Kang
• [U-Boot] [PATCH 4/9] EXYNOS5: DWMMC: Added dt support for DWMMC   Amarendra Reddy
• [U-Boot] [PATCH 5/9] EXYNOS5: DWMMC: API to set mmc clock divisor   Amarendra Reddy
• [U-Boot] [PATCH 6/9] SMDK5250: Enable DWMMC   Amarendra Reddy
• [U-Boot] [PATCH] powerpc/mpc8572ds: Enable bank interleaving to cs0+cs1 for dual-rank DIMMs   Jia Hongtao
• [U-Boot] [PATCH] powerpc/mpc8544ds: Add USB controller support for MPC8544DS   Jia Hongtao
• [U-Boot] [U-Boot, v2 1/6] cmd_sf: Add print messages on flash erase command   Jagan Teki
• [U-Boot] [U-Boot, v2 1/6] cmd_sf: Add print messages on flash erase command   Wolfgang Denk
• [U-Boot] [PULL] u-boot-usb/master   Igor Grinberg
• [U-Boot] [U-Boot, 1/2] spi: Add progress percentage and write speed to `sf update`   Jagan Teki
• [U-Boot] [PATCH 4/9] EXYNOS5: DWMMC: Added dt support for DWMMC   Jaehoon Chung
• [U-Boot] [PATCH 2/9] EXYNOS5: FDT: Add DWMMC device node data   Jaehoon Chung
• [U-Boot] [PATCH 1/1] serial/ns16550: check UART mode for TEMT value   Javier Martinez Canillas
• [U-Boot] [PATCH 00/10] Add Marvell Dove and SolidRun CuBox   Albert ARIBAUD
• [U-Boot] no mtdparted from U-Boot> prompt   Bo Shen
• [U-Boot] [PATCH 2/4] env_nand.c: support falling back to redundant env when writing   Phil Sutter
• [U-Boot] [PATCH V4 0/4] Add support for FIMD and DP on SMDK5250   Ajay Kumar
• [U-Boot] [PATCH V2 RESEND 1/4] EXYNOS5: Change parent clock of FIMD to MPLL   Ajay Kumar
• [U-Boot] [PATCH V2 2/4] EXYNOS: Add dummy definition to fix compilation dependency on CONFIG_EXYNOS_MIPI_DSIM   Ajay Kumar
• [U-Boot] [PATCH V4 3/4] video: Modify exynos_fimd driver to support LCD console   Ajay Kumar
• [U-Boot] [PATCH V4 4/4] EXYNOS5: Add support for FIMD and DP   Ajay Kumar
• [U-Boot] [PATCH V4 4/4] EXYNOS5: Add support for FIMD and DP   Rajeshwari Birje
• [U-Boot] [PATCH V4 4/4] EXYNOS5: Add support for FIMD and DP   Kyungmin Park
• [U-Boot] [PATCH V4 4/4] EXYNOS5: Add support for FIMD and DP   Minkyu Kang
• [U-Boot] [PATCH V4 4/4] EXYNOS5: Add support for FIMD and DP   Rajeshwari Birje
• [U-Boot] B4860/B4420 patches and some updates for qixis and T4240QDS   Aggrwal Poonam-B10812
• [U-Boot] [PATCH 01/09] powerpc/mpc85xx: Few updates for B4860 cpu changes   Poonam Aggrwal
• [U-Boot] [PATCH 02/09] powerpc/mpc85xx:Add support of B4420 SoC   Poonam Aggrwal
• [U-Boot] [PATCH 03/09] board/freescale/common:Add support of QTAG register   Poonam Aggrwal
• [U-Boot] [PATCH 04/09] powerpc/mpc85xx:Fix Core cluster configuration loop   Poonam Aggrwal
• [U-Boot] [PATCH 05/09] powerpc/b4860qds: Added Support for B4860QDS   Poonam Aggrwal
• [U-Boot] [PATCH 06/09] powerpc/qixis: enable qixis dump command and add switch dumping command   Poonam Aggrwal
• [U-Boot] [PATCH 07/09] powerpc/b4860qds: Add support to dump switch settings on b4860qds board   Poonam Aggrwal
• [U-Boot] [PATCH 08/09] powerpc/t4240qds: Add support to dump switch settings on t4240qds board   Poonam Aggrwal
• [U-Boot] [PATCH 09/09] powerpc/t4240qds: Print FPGA detail version   Poonam Aggrwal
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH] arm: bugfix: Move vector table before jumping relocated code   Joel A Fernandes
• [U-Boot] [PATCH 0/9] Improve default environment for easy use   Otavio Salvador
• [U-Boot] [PATCH 1/9] mx28evk: We shouldn't hardcode a rootfs filesystem type   Otavio Salvador
• [U-Boot] [PATCH 2/9] mx53loco: We shouldn't hardcode a rootfs filesystem type   Otavio Salvador
• [U-Boot] [PATCH 3/9] mx53loco: Change default loadaddr to 0x72000000   Otavio Salvador
• [U-Boot] [PATCH 4/9] mx6qsabrelite: Change default loadaddr to 0x12000000   Otavio Salvador
• [U-Boot] [PATCH 5/9] mx6qsabre_common: Change default loadaddr to 0x12000000   Otavio Salvador
• [U-Boot] [PATCH 6/9] mx28evk: Add support to dynamically choose between ftd use or not   Otavio Salvador
• [U-Boot] [PATCH 7/9] mx53loco: Add support to dynamically choose between ftd use or not   Otavio Salvador
• [U-Boot] [PATCH 8/9] mx6qsabrelite: Add support to dynamically choose between ftd use or not   Otavio Salvador
• [U-Boot] [PATCH 9/9] mx6qsabre{auto, sd}: Add support to dynamically choose between ftd use or not   Otavio Salvador
• [U-Boot] [U-Boot, 1/2] spi: Add progress percentage and write speed to `sf update`   Simon Glass
• [U-Boot] no mtdparted from U-Boot> prompt   johns at msli.com
• [U-Boot] where is the crc stored?   John Stile
• [U-Boot] [PULL] u-boot-usb/master   Stefan Schmidt
• [U-Boot] [U-Boot, 1/2] spi: Add progress percentage and write speed to `sf update`   Wolfgang Denk
• [U-Boot] where is the crc stored?   Wolfgang Denk
• [U-Boot] [PULL] : Please pull u-boot-imx   Albert ARIBAUD
• [U-Boot] [PATCH 2/9] EXYNOS5: FDT: Add DWMMC device node data   Simon Glass
• [U-Boot] where is the crc stored?   John Stile
• [U-Boot] [PULL] : Please pull u-boot-imx   stefano babic
• [U-Boot] driver/mtd/IFC:Wait tWB time, poll R/B before command execution   Scott Wood
• [U-Boot] Pull request: nand flash   Scott Wood
• [U-Boot] no mtdparted from U-Boot> prompt   John Stile
• [U-Boot] where is the crc stored?   Wolfgang Denk
• [U-Boot] no mtdparted from U-Boot> prompt   Wolfgang Denk
• [U-Boot] no mtdparted from U-Boot> prompt   John Stile
• [U-Boot] [PATCH 0/3] Add I2C driver for Tegra30 Cardhu   Tom Warren
• [U-Boot] [PATCH 1/3] Tegra30: clocks: Fix clock tables for I2C and other periphs   Tom Warren
• [U-Boot] [PATCH 2/3] Tegra30: fdt: Update DT files with I2C info for T30/Cardhu   Tom Warren
• [U-Boot] [PATCH 3/3] Tegra30: I2C: Enable I2C driver on Cardhu   Tom Warren
• [U-Boot] RFC: Secure boot framework   Simon Glass
• [U-Boot] [PATCH 1/1] OMAP3: add boot status GPIO LED for IGEP boards   Javier Martinez Canillas
• [U-Boot] [PATCH 2/4] env_nand.c: support falling back to redundant env when writing   Scott Wood
• [U-Boot] [PATCH 1/1] serial/ns16550: check UART mode for TEMT value   Scott Wood
• [U-Boot] [PATCH 1/1] serial/ns16550: check UART mode for TEMT value   Javier Martinez Canillas
• [U-Boot] no mtdparted from U-Boot> prompt   Anatolij Gustschin
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH] mx53loco: Fix PMIC name   Fabio Estevam
• [U-Boot] Pull request: nand flash   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PATCH v2] env: don't generate callback list entries for SPL   Tom Rini
• [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] [PATCH 0/5] Add splash screen for CM-T35   Nikita Kiryanov
• [U-Boot] [PATCH 1/5] omap3: add useful dss defines   Nikita Kiryanov
• [U-Boot] [PATCH 2/5] lcd: add option for board specific splash screen preparation   Nikita Kiryanov
• [U-Boot] [PATCH 3/5] cm-t35: add support for dvi displays   Nikita Kiryanov
• [U-Boot] [PATCH 4/5] cm-t35: add support for user defined lcd parameters   Nikita Kiryanov
• [U-Boot] [PATCH 5/5] cm-t35: add support for loading splash image from NAND   Nikita Kiryanov
• [U-Boot] [PATCH 1/1] OMAP3: add boot status GPIO LED for IGEP boards   Igor Grinberg
• [U-Boot] [PATCH] arm/bootstage: Move the bootstage call after gd init   Vikram Narayanan
• [U-Boot] [PATCH 1/1] OMAP3: add boot status GPIO LED for IGEP boards   Javier Martinez Canillas
• [U-Boot] [PATCH v2 1/1] OMAP3: add boot status GPIO LED for IGEP boards   Javier Martinez Canillas
• [U-Boot] [PATCH v2 1/1] OMAP3: add boot status GPIO LED for IGEP boards   Igor Grinberg
• [U-Boot] [PATCH] mx35pdk: Allow booting of a device tree kernel   Fabio Estevam
• [U-Boot] [PATCH v4 1/2] arm: move C runtime setup code in crt0.S   Albert ARIBAUD
• [U-Boot] Pull request for u-boot-marvell.git   Albert ARIBAUD
• [U-Boot] [PULL] : Please pull u-boot-imx   Albert ARIBAUD
• [U-Boot] [U-Boot, v2 3/6] sf: Add status register reading support   Jagan Teki
• [U-Boot] [U-Boot, v2 4/6] sf: Add configuration register writing support   Jagan Teki
• [U-Boot] [U-Boot, v2 5/6] sf: Add config register reading support   Jagan Teki
• [U-Boot] [U-Boot,v2 6/6] sf: Set QUAD enable bit support   Jagan Teki
• [U-Boot] please pull u-boot-samsung/resolve   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/1] OMAP3: add boot status GPIO LED for IGEP boards   Wolfgang Denk
• [U-Boot] [PATCH 3/4] fix memory corruption on versatile   Marek Vasut
• [U-Boot] [PATCH 01/09] powerpc/mpc85xx: Few updates for B4860 cpu changes   Poonam Aggrwal
• [U-Boot] B4860/B4420 patches and some updates for qixis and T4240QDS   Aggrwal Poonam-B10812
• [U-Boot] [PATCH 02/09] powerpc/mpc85xx:Add support of B4420 SoC   Poonam Aggrwal
• [U-Boot] [PATCH 03/09] board/freescale/common:Add support of QTAG register   Poonam Aggrwal
• [U-Boot] [PATCH 04/09] powerpc/mpc85xx:Fix Core cluster configuration loop   Poonam Aggrwal
• [U-Boot] [PATCH 05/09] powerpc/b4860qds: Added Support for B4860QDS   Poonam Aggrwal
• [U-Boot] [PATCH 06/09] powerpc/qixis: enable qixis dump command and add switch dumping command   Poonam Aggrwal
• [U-Boot] [PATCH 07/09] powerpc/b4860qds: Add support to dump switch settings on b4860qds board   Poonam Aggrwal
• [U-Boot] [PATCH 08/09] powerpc/t4240qds: Add support to dump switch settings on t4240qds board   Poonam Aggrwal
• [U-Boot] [PATCH 09/09] powerpc/t4240qds: Print FPGA detail version   Poonam Aggrwal
• [U-Boot] [PATCH 2/9] EXYNOS5: FDT: Add DWMMC device node data   Amarendra Reddy
• [U-Boot] [PATCH 4/9] EXYNOS5: DWMMC: Added dt support for DWMMC   Amarendra Reddy
• [U-Boot] [PATCH v2 1/1] OMAP3: add boot status GPIO LED for IGEP boards   Igor Grinberg
• [U-Boot] [PATCH 5/5] cm-t35: add support for loading splash image from NAND   Jeroen Hofstee
• [U-Boot] [PATCH v2 1/1] OMAP3: add boot status GPIO LED for IGEP boards   Javier Martinez Canillas
• [U-Boot] [PATCH v3 1/1] OMAP3: add boot status GPIO LED for IGEP boards   Javier Martinez Canillas
• [U-Boot] [PATCH 3/4] fix memory corruption on versatile   Albert ARIBAUD
• [U-Boot] [PATCH 3/4] fix memory corruption on versatile   Pavel Herrmann
• [U-Boot] [PATCH 5/5] cm-t35: add support for loading splash image from NAND   Nikita Kiryanov
• [U-Boot] [PATCH 3/4] fix memory corruption on versatile   Albert ARIBAUD
• [U-Boot] [PATCH 1/1] omap4: use plain text env file instead boot scripts   Javier Martinez Canillas
• [U-Boot] mtd update   Sergey Lapin
• [U-Boot] [PATCH] mx35pdk: Allow booting of a device tree kernel   Otavio Salvador
• [U-Boot] [PATCH v3 1/1] OMAP3: add boot status GPIO LED for IGEP boards   Wolfgang Denk
• [U-Boot] [PATCH 1/1] omap4: use plain text env file instead boot scripts   Wolfgang Denk
• [U-Boot] [PATCH v2] mx35pdk: Allow booting of a device tree kernel   Fabio Estevam
• [U-Boot] [PATCH 3/4] fix memory corruption on versatile   Pavel Herrmann
• [U-Boot] [PATCH] arm: bugfix: Move vector table before jumping relocated code   Tetsuyuki Kobayashi
• [U-Boot] [PATCH] arm: bugfix: Move vector table before jumping relocated code   Joel A Fernandes
• [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to m28evk   Marek Vasut
• [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to m28evk   Otavio Salvador
• [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to m28evk   Marek Vasut
• [U-Boot] [PATCH v3 1/1] OMAP3: add boot status GPIO LED for IGEP boards   Javier Martinez Canillas
• [U-Boot] [PATCH 1/2] OMAP3: use a single board file for IGEP devices   Javier Martinez Canillas
• [U-Boot] [PATCH v4 2/2] OMAP3: igep00x0: add boot status GPIO LED   Javier Martinez Canillas
• [U-Boot] [PATCH 1/1] omap4: use plain text env file instead boot scripts   Javier Martinez Canillas
• [U-Boot] [PATCH v3 1/3] EXYNOS: EXYNOS4X12: Populate Exynos4x12 register addresses   Minkyu Kang
• [U-Boot] [PATCH v3 2/3] EXYNOS: EXYNOS4X12: Add clock structure for EXYNOS4X12   Minkyu Kang
• [U-Boot] [PATCH v3 3/3] EXYNOS: EXYNOS4X12: Add gpio structure for EXYNOS4X12   Minkyu Kang
• [U-Boot] [PATCH v3 1/3] EXYNOS: EXYNOS4X12: Populate Exynos4x12 register addresses   Minkyu Kang
• [U-Boot] [PATCH v3 2/3] EXYNOS: EXYNOS4X12: Add clock structure for EXYNOS4X12   Minkyu Kang
• [U-Boot] [PATCH v3 3/3] EXYNOS: EXYNOS4X12: Add gpio structure for EXYNOS4X12   Minkyu Kang
• [U-Boot] [PATCH 0/5 v3] Add DT based ethernet driver for SMDK5250   Minkyu Kang
• [U-Boot] [PATCH v2] mx35pdk: Allow booting of a device tree kernel   Stefano Babic
• [U-Boot] [PATCH 1/9] mx28evk: We shouldn't hardcode a rootfs filesystem type   Stefano Babic
• [U-Boot] [PATCH 2/9] mx53loco: We shouldn't hardcode a rootfs filesystem type   Stefano Babic
• [U-Boot] [PATCH 3/9] mx53loco: Change default loadaddr to 0x72000000   Stefano Babic
• [U-Boot] [PATCH 4/9] mx6qsabrelite: Change default loadaddr to 0x12000000   Stefano Babic
• [U-Boot] [PATCH 5/9] mx6qsabre_common: Change default loadaddr to 0x12000000   Stefano Babic
• [U-Boot] [PATCH 6/9] mx28evk: Add support to dynamically choose between ftd use or not   Stefano Babic
• [U-Boot] [PATCH v3 1/3] EXYNOS: EXYNOS4X12: Populate Exynos4x12 register addresses   Chander Kashyap
• [U-Boot] [PATCH 7/9] mx53loco: Add support to dynamically choose between ftd use or not   Stefano Babic
• [U-Boot] [PATCH 1/1] omap4: use plain text env file instead boot scripts   Wolfgang Denk
• [U-Boot] [PATCH 1/1] omap4: use plain text env file instead boot scripts   Javier Martinez Canillas
• [U-Boot] [PATCH 04/16] EXYNOS5: FDT : Decode peripheral id   Minkyu Kang
• [U-Boot] [PATCH 05/16] I2C: Driver changes for FDT support   Minkyu Kang
• [U-Boot] [PATCH 16/16] SPI: EXYNOS: Add FDT support to driver.   Minkyu Kang
• [U-Boot] [PATCH 11/16] Sound: WM8994: Add FDT support to codec   Minkyu Kang
• [U-Boot] [PATCH 04/16] EXYNOS5: FDT : Decode peripheral id   Rajeshwari Birje
• [U-Boot] [PATCH 05/16] I2C: Driver changes for FDT support   Rajeshwari Birje
• [U-Boot] [PATCH 16/16] SPI: EXYNOS: Add FDT support to driver.   Rajeshwari Birje
• [U-Boot] [PATCH 11/16] Sound: WM8994: Add FDT support to codec   Rajeshwari Birje
• [U-Boot] [PATCH 7/9] mx53loco: Add support to dynamically choose between ftd use or not   Fabio Estevam
• [U-Boot] [PATCH] EXYNOS: EXYNOS4X12: extract Exynos4x12 IPs clock frequency   Minkyu Kang
• [U-Boot] [PATCH 05/16] I2C: Driver changes for FDT support   Rajeshwari Birje
• [U-Boot] [PATCH 05/16] I2C: Driver changes for FDT support   Minkyu Kang
• [U-Boot] [PATCH 5/5] cm-t35: add support for loading splash image from NAND   Jeroen Hofstee
• [U-Boot] [PATCH] mx53loco: Fix PMIC name   Fabio Estevam
• [U-Boot] [PATCH] mx53loco: Fix PMIC name   Fabio Estevam
• [U-Boot] [PATCH] mx53loco: Fix PMIC name   Fabio Estevam
• [U-Boot] [PATCH 04/16] EXYNOS5: FDT : Decode peripheral id   Simon Glass
• [U-Boot] [PATCH] mx53loco: Call PMIC related functions from board_late_init()   Fabio Estevam
• [U-Boot] [PATCH] mx53loco: Fix PMIC name   Robert Nelson
• [U-Boot] [PATCH] mx53loco: Fix PMIC name   Fabio Estevam
• [U-Boot] [PATCH] mx53loco: Fix PMIC name   Robert Nelson
• [U-Boot] [PATCH] mx53loco: Fix PMIC name   Fabio Estevam
• [U-Boot] [PATCH] mx53loco: Fix PMIC name   Robert Nelson
• [U-Boot] [PATCH] mx53loco: Fix PMIC name   Fabio Estevam
• [U-Boot] [PATCH] mx53loco: Fix PMIC name   Robert Nelson
• [U-Boot] [PATCH v2 8/8] buildman - U-Boot multi-threaded builder and summary tool   Simon Glass
• [U-Boot] [PATCH 1/9] mx28evk: We shouldn't hardcode a rootfs filesystem type   Otavio Salvador
• [U-Boot] [PATCH 6/9] mx28evk: Add support to dynamically choose between ftd use or not   Otavio Salvador
• [U-Boot] [PATCH 7/9] mx53loco: Add support to dynamically choose between ftd use or not   Otavio Salvador
• [U-Boot] [PATCH] mxs: Add NAND fdt and ramdisk partition to m28evk   Otavio Salvador
• [U-Boot] Please pull u-boot-x86.git   Simon Glass
• [U-Boot] [PATCH 0/20] Improvements to memory, hashing functions for sandbox   Simon Glass
• [U-Boot] [PATCH 01/20] Tidy up error checking and fix bug in hash command   Simon Glass
• [U-Boot] [PATCH 02/20] Update print_buffer() to use const   Simon Glass
• [U-Boot] [PATCH 03/20] sandbox: Improve sandbox serial port keyboard interface   Simon Glass
• [U-Boot] [PATCH 04/20] sandbox: Add un/map_sysmen() to deal with sandbox's ram_buf   Simon Glass
• [U-Boot] [PATCH 05/20] sandbox: Change memory commands to use map_physmem   Simon Glass
• [U-Boot] [PATCH 06/20] Split out the memory tests into separate functions   Simon Glass
• [U-Boot] [PATCH 07/20] Use common mtest iteration counting   Simon Glass
• [U-Boot] [PATCH 08/20] Fix mtest indenting   Simon Glass
• [U-Boot] [PATCH 09/20] Bring mtest putc() into common code   Simon Glass
• [U-Boot] [PATCH 10/20] Reduce casting in mtest   Simon Glass
• [U-Boot] [PATCH 11/20] Update set_working_fdt_addr() to use setenv_addr()   Simon Glass
• [U-Boot] [PATCH 12/20] common: Use new numeric setenv functions   Simon Glass
• [U-Boot] [PATCH 13/20] drivers: Use new numeric setenv functions   Simon Glass
• [U-Boot] [PATCH 14/20] net: Use new numeric setenv functions   Simon Glass
• [U-Boot] [PATCH 15/20] image: Use crc header file instead of C prototypes   Simon Glass
• [U-Boot] [PATCH 16/20] Roll crc32 into hash infrastructure   Simon Glass
• [U-Boot] [PATCH 17/20] sandbox: config: Enable hash functions and mtest   Simon Glass
• [U-Boot] [PATCH 18/20] Move CONFIG_SYS_MEMTEST_SCRATCH #ifdef to top of file   Simon Glass
• [U-Boot] [PATCH 19/20] sandbox: Update mtest to fix crashes   Simon Glass
• [U-Boot] [PATCH 20/20] sandbox: Allow hash functions to work correctly   Simon Glass
• [U-Boot] [PATCH 0/11] sandbox: Add filesystem support   Simon Glass
• [U-Boot] [PATCH 01/11] ext4: Split write support into its own file   Simon Glass
• [U-Boot] [PATCH 02/11] fs: Fully populate the filesystem method struct   Simon Glass
• [U-Boot] [PATCH 03/11] fs: Use filesystem methods instead of switch()   Simon Glass
• [U-Boot] [PATCH 04/11] fs: Tell probe functions where to put their results   Simon Glass
• [U-Boot] [PATCH 05/11] fs: Use map_sysmem() on read   Simon Glass
• [U-Boot] [PATCH 06/11] fs: Move ls and read methods into ext4, fat   Simon Glass
• [U-Boot] [PATCH 07/11] sandbox: Add a way of obtaining directory listings   Simon Glass
• [U-Boot] [PATCH 08/11] sandbox: Add host filesystem   Simon Glass
• [U-Boot] [PATCH 09/11] sandbox: Add 'sb' command to access filesystem features   Simon Glass
• [U-Boot] [PATCH 10/11] sandbox: Enable ext4 and fat filesystems   Simon Glass
• [U-Boot] [PATCH 11/11] sandbox: config: Enable sandbox command   Simon Glass
• [U-Boot] [PATCH 8/9] SMDK5250: Enable eMMC booting   Simon Glass
• [U-Boot] [U-Boot,v2,2/2] spi: Add SPI flash test   Simon Glass
• [U-Boot] [PATCH] arm/bootstage: Move the bootstage call after gd init   Simon Glass
• [U-Boot] [PATCH v4 1/2] arm: move C runtime setup code in crt0.S   Simon Glass
• [U-Boot] [PATCH 15/20] image: Use crc header file instead of C prototypes   Marek Vasut
• [U-Boot] [PATCH 0/15] Enhance SPI/SPI flash probing, add support for Intel ICH controller   Simon Glass
• [U-Boot] [PATCH 01/15] fdt: Use sed instead of cpp to pre-process the dtc   Simon Glass
• [U-Boot] [PATCH 02/15] fdt: Add fdtdec_get_addr_size() to read reg properties   Simon Glass
• [U-Boot] [PATCH 03/15] spi: Add function to allocate a new SPI slave   Simon Glass
• [U-Boot] [PATCH 04/15] spi: Use spi_alloc_slave() in each SPI driver   Simon Glass
• [U-Boot] [PATCH 05/15] sf: Add spi_flash_alloc() to create a new SPI flash struct   Simon Glass
• [U-Boot] [PATCH 06/15] sf: Use spi_flash_alloc() in each SPI flash driver   Simon Glass
• [U-Boot] [PATCH 07/15] x86: spi: Add Intel ICH driver   Simon Glass
• [U-Boot] [PATCH 08/15] spi: Add parameter for maximum write size   Simon Glass
• [U-Boot] [PATCH 09/15] sf: Respect maximum SPI write size   Simon Glass
• [U-Boot] [PATCH 10/15] x86: spi: Set maximum write size for ICH   Simon Glass
• [U-Boot] [PATCH 11/15] sf: Enable FDT-based configuration and memory mapping   Simon Glass
• [U-Boot] [PATCH 12/15] x86: Move PCI init before SPI init   Simon Glass
• [U-Boot] [PATCH 13/15] x86: Add FDT SPI node for link   Simon Glass
• [U-Boot] [PATCH 14/15] x86: Enable SPI flash support for coreboot   Simon Glass
• [U-Boot] [PATCH 15/15] x86: Enable time command for coreboot   Simon Glass
• [U-Boot] powerpc/mpc8315erdb : Integration of customized source code to u-boot   Krishna Mohan Chagaleti
• [U-Boot] [PATCH 8/9] SMDK5250: Enable eMMC booting   Amarendra Reddy
• [U-Boot] [PATCH] EXYNOS5: Add L2 Cache Support.   Rajeshwari Birje
• [U-Boot] [PATCH 00/16 V2] SMDK5250: Add FDT support   Rajeshwari Shinde
• [U-Boot] [PATCH 01/16 V2] EXYNOS5: FDT: Add I2C device node data   Rajeshwari Shinde
• [U-Boot] [PATCH 02/16 V2] EXYNOS5 : FDT: Add Aliases for I2C device   Rajeshwari Shinde
• [U-Boot] [PATCH 03/16 V2] FDT: Add compatible string for I2C   Rajeshwari Shinde
• [U-Boot] [PATCH 04/16 V2] EXYNOS5: FDT : Decode peripheral id   Rajeshwari Shinde
• [U-Boot] [PATCH 05/16 V2] I2C: Driver changes for FDT support   Rajeshwari Shinde
• [U-Boot] [PATCH 06/16 V2] SMDK5250: Initialise I2C using FDT   Rajeshwari Shinde
• [U-Boot] [PATCH 07/16 V2] EXYNOS5: FDT: Add sound device node data   Rajeshwari Shinde
• [U-Boot] [PATCH 08/16 V2] EXYNOS5: FDT: Add sound and codec device node   Rajeshwari Shinde
• [U-Boot] [PATCH 09/16 V2] EXYNOS5: FDT: Add compatible strings for sound   Rajeshwari Shinde
• [U-Boot] [PATCH 10/16 V2] Sound: Add FDT support to driver   Rajeshwari Shinde
• [U-Boot] [PATCH 11/16 V2] Sound: WM8994: Add FDT support to codec   Rajeshwari Shinde
• [U-Boot] [PATCH 12/16 V2] Sound: Add FDT support to CMD.   Rajeshwari Shinde
• [U-Boot] [PATCH 13/16 V2] EXYNOS5: FDT: Add compatible strings for SPI   Rajeshwari Shinde
• [U-Boot] [PATCH 14/16 V2] EXYNOS5 : FDT: Add Aliases for SPI device   Rajeshwari Shinde
• [U-Boot] [PATCH 15/16 V2] EXYNOS5: FDT: Add SPI device node data   Rajeshwari Shinde
• [U-Boot] [PATCH 16/16 V2] SPI: EXYNOS: Add FDT support to driver.   Rajeshwari Shinde
• [U-Boot] [PULL] u-boot-usb/master   Lukasz Majewski
• [U-Boot] [PATCH 1/2] OMAP3: use a single board file for IGEP devices   Igor Grinberg
• [U-Boot] [PATCH 3/4] fix memory corruption on versatile   Albert ARIBAUD
• [U-Boot] [PATCH 1/9] mx28evk: We shouldn't hardcode a rootfs filesystem type   Stefano Babic
• [U-Boot] [PATCH] arm/bootstage: Move the bootstage call after gd init   Albert ARIBAUD
• [U-Boot] [PATCH 7/9] mx53loco: Add support to dynamically choose between ftd use or not   Stefano Babic
• [U-Boot] [PATCH] mx53loco: Call PMIC related functions from board_late_init()   Stefano Babic
• [U-Boot] [PATCH] mx53loco: Call PMIC related functions from board_late_init()   Fabio Estevam
• [U-Boot] [PATCH] arm/bootstage: Move the bootstage call after gd init   Albert ARIBAUD
• [U-Boot] [PATCH] mx53loco: Call PMIC related functions from board_late_init()   Stefano Babic
• [U-Boot] powerpc/mpc8315erdb : Integration of customized source code to u-boot   Wolfgang Denk
• [U-Boot] U-Boot command options   Casper
• [U-Boot] [PATCH] mx53loco: Remove unneeded 'retval' variable   Fabio Estevam
• [U-Boot] [PATCH 1/9] mx28evk: We shouldn't hardcode a rootfs filesystem type   Wolfgang Denk
• [U-Boot] [PATCH] mx53loco: Remove unneeded 'retval' variable   Wolfgang Denk
• [U-Boot] [PATCH 1/2] OMAP3: use a single board file for IGEP devices   Javier Martinez Canillas
• [U-Boot] [PATCH] mx53loco: Remove unneeded 'retval' variable   Stefano Babic
• [U-Boot] [PATCH] mx53loco: Remove unneeded 'retval' variable   Fabio Estevam
• [U-Boot] [PATCH v4 0/2] Factorize ARM startup code as mush as possible.   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/2] OMAP3: use a single board file for IGEP devices   Javier Martinez Canillas
• [U-Boot] [PATCH] arm/bootstage: Move the bootstage call after gd init   Vikram Narayanan
• [U-Boot] [PATCH v4 2/2] OMAP3: igep00x0: add boot status GPIO LED   Igor Grinberg
• [U-Boot] [PATCH v2 1/2] OMAP3: use a single board file for IGEP devices   Igor Grinberg
• [U-Boot] [PATCH v4 2/2] OMAP3: igep00x0: add boot status GPIO LED   Javier Martinez Canillas
• [U-Boot] [PATCH v5 2/2] OMAP3: igep00x0: add boot status GPIO LED   Javier Martinez Canillas
• [U-Boot] [PATCH v5 2/2] OMAP3: igep00x0: add boot status GPIO LED   Igor Grinberg
• [U-Boot] [PATCH 01/11] ext4: Split write support into its own file   Lukasz Majewski
• [U-Boot] [PATCH] mx51evk: Remove unneeded comment   Fabio Estevam
• [U-Boot] U-Boot: Checksum error when booting kernel from jffs2 partition   dpdonny
• [U-Boot] [PATCH] mx53loco: Call PMIC related functions from board_late_init()   Albert ARIBAUD
• [U-Boot] [PATCH] mmc: fsl_esdhc: Use calloc()   Fabio Estevam
• [U-Boot] [PATCH v2] mmc: fsl_esdhc: Use calloc()   Fabio Estevam
• [U-Boot] U-Boot: Checksum error when booting kernel from jffs2 partition   dpdonny
• [U-Boot] [PATCH] mx53loco: Remove unneeded 'retval' variable   Wolfgang Denk
• [U-Boot] [PATCH] mx53loco: Remove unneeded 'retval' variable   Wolfgang Denk
• [U-Boot] U-Boot command options   Wolfgang Denk
• [U-Boot] [PATCH 1/9] mx28evk: We shouldn't hardcode a rootfs filesystem type   Otavio Salvador
• [U-Boot] [PATCH 7/9] mx53loco: Add support to dynamically choose between ftd use or not   Otavio Salvador
• [U-Boot] [PATCH v2] mmc: fsl_esdhc: Use calloc()   Jeroen Hofstee
• [U-Boot] U-Boot: Checksum error when booting kernel from jffs2 partition   Dan Donahue
• [U-Boot] [PATCH 01/15] fdt: Use sed instead of cpp to pre-process the dtc   Stephen Warren
• [U-Boot] [PATCH 3/4] fix memory corruption on versatile   Pavel Herrmann
• [U-Boot] powerpc/mpc8315erdb : Integration of customized source code to u-boot   Krishna Mohan Chagaleti
• [U-Boot] [PATCH] mx53loco: Remove unneeded 'retval' variable   Stefano Babic
• [U-Boot] [PATCH 1/2] Exynos: clock: support get_mmc_clk for exynos   Jaehoon Chung
• [U-Boot] [PATCH 2/2] Exynos: clock: add CLK_DIV_FSYS3 at set_mmc_clk   Jaehoon Chung
• [U-Boot] [PATCH] mx53loco: Call PMIC related functions from board_late_init()   Stefano Babic
• [U-Boot] [PATCH 7/9] mx53loco: Add support to dynamically choose between ftd use or not   Stefano Babic
• [U-Boot] U-Boot command options   Casper
• [U-Boot] [PATCH 3/4] fix memory corruption on versatile   Albert ARIBAUD
• [U-Boot] [PATCH] mx53loco: Call PMIC related functions from board_late_init()   Albert ARIBAUD
• [U-Boot] [PATCH][RFC] MTD resync from Linux-3.8-rc2+ (master)   Sergey Lapin
• [U-Boot] [PATCH 0/4] SMDK5250: Convert lowlevel_init.S to .c and set PMIC values   Rajeshwari Shinde
• [U-Boot] [PATCH 1/4] SMDK5250: Convert lowlevel_init.S to lowlevel_init_c.c   Rajeshwari Shinde
• [U-Boot] [PATCH 2/4] EXYNOS: Add functions for power initialisation   Rajeshwari Shinde
• [U-Boot] [PATCH 3/4] SMDK5250: Add PMIC voltage settings   Rajeshwari Shinde
• [U-Boot] [PATCH 4/4] SMDK5250: Modify IRAM stack pointer address   Rajeshwari Shinde
• [U-Boot] [PATCH] mx53loco: Call PMIC related functions from board_late_init()   Stefano Babic
• [U-Boot] [RFC][PULL-REQ] MTD update   Sergey Lapin
• [U-Boot] [PATCH 1/1] OMAP3: igep00x0: add CONFIG_SPL_BOARD_INIT for CONFIG_SPL_NAND_SUPPORT   Javier Martinez Canillas
• [U-Boot] [PATCH 1/1] OMAP3: igep00x0: add CONFIG_SPL_BOARD_INIT for CONFIG_SPL_NAND_SUPPORT   Enric Balletbo Serra
• [U-Boot] [RFC][PULL-REQ] MTD update   Wolfgang Denk
• [U-Boot] [RFC][PULL-REQ] MTD update   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Stefan Schmidt
• [U-Boot] [PATCH v2 1/2] mx53loco: Remove unneeded 'retval' variable   Fabio Estevam
• [U-Boot] [PATCH v2 2/2] mx53loco: Improve error handling on power_init()   Fabio Estevam
• [U-Boot] configuring u-boot for custom board based on beaglebone(am335xx_evm)   Tom Rini
• [U-Boot] [PATCH 01/15] fdt: Use sed instead of cpp to pre-process the dtc   Simon Glass
• [U-Boot] [RFC][PULL-REQ] MTD update   Sergey Lapin
• [U-Boot] [RFC][PULL-REQ] MTD update   Wolfgang Denk
• [U-Boot] [PATCH 1/4] SMDK5250: Convert lowlevel_init.S to lowlevel_init_c.c   Simon Glass
• [U-Boot] [PATCH 2/4] EXYNOS: Add functions for power initialisation   Simon Glass
• [U-Boot] [PATCH 9/9] COMMON: MMC: Command to support EMMC booting   Wolfgang Denk
• [U-Boot] [PATCH 7/9] MMC: APIs to support creation of boot partition   Wolfgang Denk
• [U-Boot] [PATCH V2 0/9] EXYNOS5: Enable dwmmc   Amarendra Reddy
• [U-Boot] [PATCH 3/4] SMDK5250: Add PMIC voltage settings   Simon Glass
• [U-Boot] [PATCH 4/4] SMDK5250: Modify IRAM stack pointer address   Simon Glass
• [U-Boot] [PATCH V2 0/9] EXYNOS5: Enable dwmmc   Amar
• [U-Boot] [PATCH 1/9] FDT: Add compatible string for DWMMC   Amar
• [U-Boot] [PATCH 2/9] EXYNOS5: FDT: Add DWMMC device node data   Amar
• [U-Boot] [PATCH 4/9] EXYNOS5: DWMMC: Added dt support for DWMMC   Amar
• [U-Boot] [PATCH 5/9] EXYNOS5: DWMMC: API to set mmc clock divisor   Amar
• [U-Boot] [PATCH 6/9] SMDK5250: Enable DWMMC   Amar
• [U-Boot] [PATCH 7/9] MMC: APIs to support creation of boot partition   Amar
• [U-Boot] [PATCH 8/9] SMDK5250: Enable EMMC booting   Amar
• [U-Boot] [PATCH 9/9] COMMON: MMC: Command to support EMMC booting   Amar
• [U-Boot] [PATCH 01/15] fdt: Use sed instead of cpp to pre-process the dtc   Mike Frysinger
• [U-Boot] [PATCH 7/9] mx53loco: Add support to dynamically choose between ftd use or not   Otavio Salvador
• [U-Boot] [PATCH 01/15] fdt: Use sed instead of cpp to pre-process the dtc   Simon Glass
• [U-Boot] [PATCH v2 0/6] Improve default environment for easy use   Otavio Salvador
• [U-Boot] [PATCH v2 1/6] mx6qsabrelite: Use tabs to environment setting   Otavio Salvador
• [U-Boot] [PATCH v2 2/6] mx28evk: We shouldn't hardcode a rootfs filesystem type   Otavio Salvador
• [U-Boot] [PATCH v2 3/6] mx28evk: Add support to dynamically choose between ftd use or not   Otavio Salvador
• [U-Boot] [PATCH v2 4/6] mx53loco: Add support to dynamically choose between ftd use or not   Otavio Salvador
• [U-Boot] [PATCH v2 5/6] mx6qsabrelite: Add support to dynamically choose between ftd use or not   Otavio Salvador
• [U-Boot] [PATCH v2 6/6] mx6qsabre{auto, sd}: Add support to dynamically choose between ftd use or not   Otavio Salvador
• [U-Boot] [PATCH 01/15] fdt: Use sed instead of cpp to pre-process the dtc   Stephen Warren
• [U-Boot] [PATCH 01/15] fdt: Use sed instead of cpp to pre-process the dtc   Simon Glass
• [U-Boot] Rx FIFO: more than 64 bytes receive error   lokesh nijalinge
• [U-Boot] Rx FIFO: more than 64 bytes receive error   Albert ARIBAUD
• [U-Boot] [PULL] u-boot-usb/master   Lukasz Majewski
• [U-Boot] [RFC]: always relocate u-boot before the framebuffer   Jeroen Hofstee
• [U-Boot] [RFC]: always relocate u-boot before the framebuffer   Jeroen Hofstee
• [U-Boot] [RFC][PULL-REQ] MTD update   Sergey Lapin
• [U-Boot] [RFC][PULL-REQ] MTD update   Marek Vasut
• [U-Boot] [RFC]: always relocate u-boot before the framebuffer   Wolfgang Denk
• [U-Boot] [RFC]: always relocate u-boot before the framebuffer   Wolfgang Denk
• [U-Boot] [RFC][PULL-REQ] MTD update   Wolfgang Denk
• [U-Boot] [RFC][PULL-REQ] MTD update   Sergey Lapin
• [U-Boot] [RFC][PULL-REQ] MTD update   Sergey Lapin
• [U-Boot] [RFC][PULL-REQ] MTD update   Marek Vasut
• [U-Boot] [RFC][PULL-REQ] MTD update   Wolfgang Denk
• [U-Boot] [RFC][PULL-REQ] MTD update   Sergey Lapin
• [U-Boot] [RFC][PULL-REQ] MTD update   Vikram Narayanan
• [U-Boot] [PATCH 0/7] omap mmc: implement card detect and write protection   Nikita Kiryanov
• [U-Boot] [PATCH 5/5] cm-t35: add support for loading splash image from NAND   Nikita Kiryanov
• [U-Boot] [PATCH 0/3] Enable eMMC on mx6qsabresd board   Shawn Guo
• [U-Boot] [PATCH 1/3] fsl_esdhc: add MMC_MODE_HC host_caps   Shawn Guo
• [U-Boot] [PATCH 2/3] mx6qsabresd: add usdhc2 and usdhc4 support   Shawn Guo
• [U-Boot] [PATCH 3/3] mx6qsabresd: use on-board eMMC to store environment   Shawn Guo
• [U-Boot] [PATCH 0/3] Enable eMMC on mx6qsabresd board   Shawn Guo
• [U-Boot] [PATCH 0/3] Enable eMMC on mx6qsabresd board   Fabio Estevam
• [U-Boot] [PATCH 0/3] Enable eMMC on mx6qsabresd board   Shawn Guo
• [U-Boot] [PATCH 1/3] fsl_esdhc: add MMC_MODE_HC host_caps   Shawn Guo
• [U-Boot] [PATCH 1/4] SMDK5250: Convert lowlevel_init.S to lowlevel_init_c.c   Rajeshwari Birje
• [U-Boot] MPC8555 pci issue   Ashok Kumar Kacham
• [U-Boot] Rx FIFO: more than 64 bytes receive error   lokesh nijalinge
• [U-Boot] [PATCH V3 0/9] EXYNOS5: Enable DWMMC, add FDT support for DWMMC and   Amar
• [U-Boot] [PATCH V3 1/9] FDT: Add compatible string for DWMMC   Amar
• [U-Boot] [PATCH V3 2/9] EXYNOS5: FDT: Add DWMMC device node data   Amar
• [U-Boot] [PATCH V3 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues   Amar
• [U-Boot] [PATCH V3 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC   Amar
• [U-Boot] [PATCH V3 5/9] EXYNOS5: DWMMC: API to set mmc clock divisor   Amar
• [U-Boot] [PATCH V3 6/9] SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT   Amar
• [U-Boot] [PATCH V3 7/9] MMC: APIs to support resize of EMMC boot partition   Amar
• [U-Boot] [PATCH V3 8/9] SMDK5250: Enable EMMC booting   Amar
• [U-Boot] [PATCH V3 9/9] COMMON: MMC: Command to support EMMC booting and to   Amar
• [U-Boot] [PATCH 00/12] cmd_sf: Add support for read and write instructions   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 01/12] cmd_sf: Add wr_inst argument to 'sf write' command   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 02/12] cmd_sf: Add rd_inst argument to 'sf read' command   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 03/12] cmd_sf: Add wr_inst argument to 'sf update' command   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 04/12] cmd_sf: Add rd_inst argument to 'sf update' command   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 05/12] cmd_sf: Define a functions for parsing read and write instructions   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 06/12] cmd_sf: Add QPP(Quad-input Page Program) write instruction support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 07/12] cmd_sf: Add ASR(Array Slow Read) read instruction support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 08/12] cmd_sf: Add DOFR(Dual Output Fast Read) read instruction support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 09/12] cmd_sf: Add QOFR(Quad Output Fast Read) read instruction support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 10/12] cmd_sf: Add DIOFR(Dual IO Fast Read) read instruction support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 11/12] cmd_sf: Add QIOFR(Quad IO Fast Read) read instruction support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 12/12] sf: Pass rd_qeb_req variable as 0 for status and config reg reads   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 1/4] SMDK5250: Convert lowlevel_init.S to lowlevel_init_c.c   Kyungmin Park
• [U-Boot] [PATCH V3 1/9] FDT: Add compatible string for DWMMC   Kyungmin Park
• [U-Boot] [PATCH v2 1/2] cmd_sf: Add DIOFR(Dual IO Fast Read) read instruction support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v2 2/2] cmd_sf: Add QIOFR(Quad IO Fast Read) read instruction support   Jagannadha Sutradharudu Teki
• [U-Boot] [RFC]: always relocate u-boot before the framebuffer   Lukasz Majewski
• [U-Boot] MPC8555 pci issue   Wolfgang Denk
• [U-Boot] [RFC]: always relocate u-boot before the framebuffer   Wolfgang Denk
• [U-Boot] [PATCH 0/5] am335x_evm: support for booting via USB   Ilya Yanok
• [U-Boot] [PATCH 1/5] spl: support for booting via usbeth   Ilya Yanok
• [U-Boot] [PATCH 2/5] am33xx: support for booting via usbeth   Ilya Yanok
• [U-Boot] [PATCH 3/5] am335x_evm: enable support for booting via USB   Ilya Yanok
• [U-Boot] [PATCH 4/5] spl: add possibility to force boot device   Ilya Yanok
• [U-Boot] [PATCH 5/5] am335x_evm: add new config with forced USB booting   Ilya Yanok

Last message date: Mon Dec 31 17:32:43 CET 2012
Archived on: Mon Dec 31 17:41:18 CET 2012

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...