[U-Boot] [PATCH 07/11] usb: usbeth: smsc95xx: remove EEPROM loaded check

[Simon Glass]

From: Michael Spang <spang at chromium.org>

[port of Linux kernel commit bcd218be5aeb by Steve Glendinning]

The eeprom read & write commands currently check the E2P_CMD_LOADED_ bit is
set before allowing any operations.  This prevents any reading or writing
unless a correctly programmed EEPROM is installed.

Signed-off-by: Michael Spang <spang at chromium.org>
Signed-off-by: Simon Glass <sjg at chromium.org>
---
 drivers/usb/eth/smsc95xx.c |    4 ----
 1 files changed, 0 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/eth/smsc95xx.c b/drivers/usb/eth/smsc95xx.c
index dc5ca65..fd8f8a7 100644
--- a/drivers/usb/eth/smsc95xx.c
+++ b/drivers/usb/eth/smsc95xx.c
@@ -265,10 +265,6 @@ static int smsc95xx_eeprom_confirm_not_busy(struct ueth_data *dev)
 
 	do {
 		smsc95xx_read_reg(dev, E2P_CMD, &val);
-		if (!(val & E2P_CMD_LOADED_)) {
-			debug("No EEPROM present\n");
-			return -1;
-		}
 		if (!(val & E2P_CMD_BUSY_))
 			return 0;
 		udelay(40);
-- 
1.7.7.3