[U-Boot] [PATCH v4 0/2] Factorize ARM startup code as mush as possible.

Albert ARIBAUD albert.u.boot at aribaud.net
Thu Dec 27 12:27:59 CET 2012


On Tue, 27 Nov 2012 13:43:24 +0100, Albert ARIBAUD
<albert.u.boot at aribaud.net> wrote:
> The goal of this series is to scrub the start.S files
> which have proliferated across arch/arm and eliminate
> code redundancy.
> 
> This series only factorizes the C runtime framework,
> that is, the assembly code responsible for setting up
> the C environments needed by board_init_*() and
> relocate_code().
> 
> Further factorization is possible: relocate_code() can
> be moved out and possibly rewritten in C now that it
> has plain C function semantics; exception handlers
> should also be pretty much cpu-independent.
> 
> Also, SPL currently makes board_init_f() perform all
> of the setting up, including BSS clearing and chain-
> loading. This could be streamlined by only putting
> basic inits in board_init_f(), letting crt0 do the
> BSS initialization and chain-loading U-Boot from
> inside board_init_r().
> 
> Eventually, start.S files should disappear or contain
> CPU-specific code only.
> 
> The new C runtime setup sequence has been validated step by
> step on targets versatileqemu using gcc version 4.2.2 from
> the ELDK4.2 toolchain, and wireless_space using gcc version
> 4.7.2 (Ubuntu/Linaro 4.7.2-1ubuntu1).
> 
> The whole changes have been build-tested across all ARM
> targets using MAKEALL -a arm.
> 
> Changes in v4:
> - fixed bhs into blo in BSS init loop
> - switched from explicit literals to '=target' notation
> - fixed location of GD in initial environment
> - stopped SPL boot sequence at calling board_init_f
> 
> Changes in v3:
> - various clarifications and typo fixes
> - fixed wrong LED calls conditional
> - fixed open comment eating some code
> - fixed code overrun in SPL case
> 
> Changes in v2:
> - moved description from cover letter to patch commit msg
> - added note about tests in the cover letter
> - fixed baords with CONFIG_SPL but not CONFIG_SPL_STACK
> - removed useless includes in arm926ejs and arm925t
> 
> Albert ARIBAUD (2):
>   arm: move C runtime setup code in crt0.S
>   arm: remove useless code in start.S files
> 
>  arch/arm/cpu/arm1136/start.S              |   71 +++---------
>  arch/arm/cpu/arm1176/start.S              |   62 ++---------
>  arch/arm/cpu/arm720t/start.S              |   53 ++-------
>  arch/arm/cpu/arm920t/start.S              |   61 ++--------
>  arch/arm/cpu/arm925t/start.S              |   65 ++---------
>  arch/arm/cpu/arm926ejs/start.S            |   86 ++------------
>  arch/arm/cpu/arm946es/start.S             |   56 ++--------
>  arch/arm/cpu/arm_intcm/start.S            |   63 ++---------
>  arch/arm/cpu/armv7/start.S                |   58 +++-------
>  arch/arm/cpu/ixp/start.S                  |   55 ++-------
>  arch/arm/cpu/pxa/start.S                  |   63 ++---------
>  arch/arm/cpu/s3c44b0/start.S              |   55 ++-------
>  arch/arm/cpu/sa1100/start.S               |   50 ++-------
>  arch/arm/lib/Makefile                     |    2 +
>  arch/arm/lib/board.c                      |   11 --
>  arch/arm/lib/crt0.S                       |  173 +++++++++++++++++++++++++++++
>  include/common.h                          |    2 +-
>  include/configs/socfpga_cyclone5.h        |    2 +-
>  lib/asm-offsets.c                         |   10 ++
>  nand_spl/board/freescale/mx31pdk/Makefile |    6 +-
>  nand_spl/board/karo/tx25/Makefile         |    6 +-
>  21 files changed, 322 insertions(+), 688 deletions(-)
>  create mode 100644 arch/arm/lib/crt0.S
> 
> -- 
> 1.7.10.4

Tom,

These have been tested on several boards. Can it go in? If it can,
then I would like to take it in u-boot-arm/master with your Acked-By.

Amicalement,
-- 
Albert.


More information about the U-Boot mailing list