[U-Boot] [PATCH 10/10] tools: Add support for Dove to kwboot

Luka Perkov luka at openwrt.org
Sun Dec 2 20:15:14 CET 2012


Hi Sebastian,

On Sun, Dec 02, 2012 at 03:36:22PM +0100, Sebastian Hesselbarth wrote:
> On Dove kwboot can also be used to boot an u-boot image into RAM.
> In contrast to Kirkwood, Dove does not support the UART boot mode
> sequence but requires the UART boot mode to be selected through
> strap pins. The SolidRun CuBox has a push button to allow uart
> boot mode but fails on the boot sequence sent by kwboot.
> 
> This patch adds another cmdline option to allow to send a boot
> image without the boot sequence and adds support for Dove.
> 
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
> ---
> Cc: u-boot at lists.denx.de
> Cc: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
> Cc: Rabeeh Khoury <rabeeh at solid-run.com>
> Cc: Albert Aribaud <albert.u.boot at aribaud.net>
> Cc: Prafulla Wadaskar <prafulla at marvell.com>
> Cc: Andy Fleming <afleming at gmail.com>
> Cc: Joe Hershberger <joe.hershberger at gmail.com>
> Cc: Daniel Stodden <daniel.stodden at gmail.com>
> Cc: Dieter Kiermaier <dk-arm-linux at gmx.de>
> ---
>  tools/Makefile |    2 ++
>  tools/kwboot.c |   44 ++++++++++++++++++++++++++++++++++++++++----
>  2 files changed, 42 insertions(+), 4 deletions(-)

Please update the documentation too (doc/kwboot.1).

Luka


More information about the U-Boot mailing list