[U-Boot] [PATCH 2/4] sf: Add print message on flash read function

[Jagan Teki]

Hi Simon,

On Wed, Dec 12, 2012 at 12:03 PM, Simon Glass <sjg at chromium.org> wrote:
> Hi,
>
> On Mon, Dec 10, 2012 at 6:41 AM, Jagannadha Sutradharudu Teki
> <jagannadh.teki at gmail.com> wrote:
>> This patch adds a print message on spi_flash_cmd_read_fast()
>> to make sure that how many bytes read from flash device.
>>
>> Signed-off-by: Jagannadha Sutradharudu Teki <jagannadh.teki at gmail.com>
>
> I have the same verbosity comment on this patch, BTW.

This is also needs to put it on cmd_sf,c?

Thanks,
Jagan.

>
> Regards,
> Simon
>
>> ---
>>  drivers/mtd/spi/spi_flash.c |    7 ++++++-
>>  1 files changed, 6 insertions(+), 1 deletions(-)
>>
>> diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
>> index 464c2ab..800ed8b 100644
>> --- a/drivers/mtd/spi/spi_flash.c
>> +++ b/drivers/mtd/spi/spi_flash.c
>> @@ -139,12 +139,17 @@ int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset,
>>                 size_t len, void *data)
>>  {
>>         u8 cmd[5];
>> +       int ret;
>>
>>         cmd[0] = CMD_READ_ARRAY_FAST;
>>         spi_flash_addr(offset, cmd);
>>         cmd[4] = 0x00;
>>
>> -       return spi_flash_read_common(flash, cmd, sizeof(cmd), data, len);
>> +       ret = spi_flash_read_common(flash, cmd, sizeof(cmd), data, len);
>> +       printf("SF: re-program %s %zu bytes @ %#x\n",
>> +               ret ? "failure" : "success", len, offset);
>> +
>> +       return ret;
>>  }
>>
>>  int spi_flash_cmd_poll_bit(struct spi_flash *flash, unsigned long timeout,
>> --
>> 1.7.0.4
>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot