[U-Boot] [PATCH 2/2] SMDK5250: Enable pmic MAX77686

[Rajeshwari Shinde]

Enabled pmic MAX77686 for SMDK5250.

Signed-off-by: Rajeshwari Shinde <rajeshwari.s at samsung.com>
---
 board/samsung/smdk5250/smdk5250.c |   15 +++++++++++----
 include/configs/smdk5250.h        |    8 ++++----
 2 files changed, 15 insertions(+), 8 deletions(-)

diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c
index 4c50342..9c926d6 100644
--- a/board/samsung/smdk5250/smdk5250.c
+++ b/board/samsung/smdk5250/smdk5250.c
@@ -30,7 +30,7 @@
 #include <asm/arch/mmc.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch/sromc.h>
-#include <pmic.h>
+#include <power/pmic.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -65,9 +65,6 @@ static int smc9115_pre_init(void)
 int board_init(void)
 {
 	gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
-#if defined(CONFIG_PMIC)
-	pmic_init();
-#endif
 #ifdef CONFIG_EXYNOS_SPI
 	spi_init();
 #endif
@@ -87,6 +84,16 @@ int dram_init(void)
 	return 0;
 }
 
+#if defined(CONFIG_POWER)
+int power_init_board(void)
+{
+	if (pmic_init(I2C_PMIC))
+		return -1;
+	else
+		return 0;
+}
+#endif
+
 void dram_init_banksize(void)
 {
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h
index e412da8..df00305 100644
--- a/include/configs/smdk5250.h
+++ b/include/configs/smdk5250.h
@@ -65,7 +65,7 @@
 #define INFORM1_OFFSET			0x804
 
 /* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (1 << 20))
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (4 << 20))
 
 /* select serial console configuration */
 #define CONFIG_SERIAL3			/* use SERIAL 3 */
@@ -209,9 +209,9 @@
 #define CONFIG_SYS_I2C_SLAVE    0x0
 
 /* PMIC */
-#define CONFIG_PMIC
-#define CONFIG_PMIC_I2C
-#define CONFIG_PMIC_MAX77686
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_MAX77686
 
 /* SPI */
 #define CONFIG_ENV_IS_IN_SPI_FLASH
-- 
1.7.4.4