[U-Boot] [PATCH v2 6/7] usb: Add multiple controllers support for EHCI PCI
Simon Glass
sjg at chromium.org
Fri Dec 14 03:21:31 CET 2012
From: Vincent Palatin <vpalatin at chromium.org>
Use the ability to have several active EHCI controller on a system
in the PCI EHCI controller implementation.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v2:
- Add blank line before function return
drivers/usb/host/ehci-pci.c | 26 +++++++++++++++++---------
1 files changed, 17 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 8064a32..b258772 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -34,7 +34,7 @@ static struct pci_device_id ehci_pci_ids[] = {
{0, 0}
};
#else
-static pci_dev_t ehci_find_class(void)
+static pci_dev_t ehci_find_class(int index)
{
int bus;
int devnum;
@@ -54,7 +54,8 @@ static pci_dev_t ehci_find_class(void)
bdf += PCI_BDF(0, 0, 1)) {
pci_read_config_dword(bdf, PCI_CLASS_REVISION,
&class);
- if (class >> 8 == PCI_CLASS_SERIAL_USB_EHCI)
+ if ((class >> 8 == PCI_CLASS_SERIAL_USB_EHCI)
+ && !index--)
return bdf;
}
}
@@ -68,34 +69,41 @@ static pci_dev_t ehci_find_class(void)
* Create the appropriate control structures to manage
* a new EHCI host controller.
*/
-int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+int ehci_hcd_init(int index, struct ehci_hccr **ret_hccr,
+ struct ehci_hcor **ret_hcor)
{
pci_dev_t pdev;
uint32_t cmd;
+ struct ehci_hccr *hccr;
+ struct ehci_hcor *hcor;
#ifdef CONFIG_PCI_EHCI_DEVICE
pdev = pci_find_devices(ehci_pci_ids, CONFIG_PCI_EHCI_DEVICE);
#else
- pdev = ehci_find_class();
+ pdev = ehci_find_class(index);
#endif
if (pdev < 0) {
printf("EHCI host controller not found\n");
return -1;
}
- *hccr = (struct ehci_hccr *)pci_map_bar(pdev,
+ hccr = (struct ehci_hccr *)pci_map_bar(pdev,
PCI_BASE_ADDRESS_0, PCI_REGION_MEM);
- *hcor = (struct ehci_hcor *)((uint32_t) *hccr +
- HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
+ hcor = (struct ehci_hcor *)((uint32_t) hccr +
+ HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
debug("EHCI-PCI init hccr 0x%x and hcor 0x%x hc_length %d\n",
- (uint32_t)*hccr, (uint32_t)*hcor,
- (uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
+ (uint32_t)hccr, (uint32_t)hcor,
+ (uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
/* enable busmaster */
pci_read_config_dword(pdev, PCI_COMMAND, &cmd);
cmd |= PCI_COMMAND_MASTER;
pci_write_config_dword(pdev, PCI_COMMAND, cmd);
+
+ *ret_hccr = hccr;
+ *ret_hcor = hcor;
+
return 0;
}
--
1.7.7.3
More information about the U-Boot
mailing list