[U-Boot] [PATCH 2/4] EXYNOS: Add functions for power initialisation

[Rajeshwari Shinde]

This patch adds functions to intialsise power registers during
spl boot.

Signed-off-by: Rajeshwari Shinde <rajeshwari.s at samsung.com>
---
 arch/arm/cpu/armv7/exynos/power.c        |   34 ++++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-exynos/power.h |    5 ++++
 2 files changed, 39 insertions(+), 0 deletions(-)

diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c
index d4bce6d..8ab43f4 100644
--- a/arch/arm/cpu/armv7/exynos/power.c
+++ b/arch/arm/cpu/armv7/exynos/power.c
@@ -22,8 +22,15 @@
  */
 
 #include <common.h>
+#include <errno.h>
+#include <i2c.h>
 #include <asm/io.h>
 #include <asm/arch/power.h>
+#include <asm/arch/spl.h>
+#include <power/max77686_pmic.h>
+#include <power/pmic.h>
+#include <asm/arch/periph.h>
+#include <asm/arch/pinmux.h>
 
 static void exynos4_mipi_phy_control(unsigned int dev_index,
 					unsigned int enable)
@@ -95,3 +102,30 @@ void set_dp_phy_ctrl(unsigned int enable)
 	if (cpu_is_exynos5())
 		exynos5_dp_phy_control(enable);
 }
+
+uint32_t power_read_reset_status(void)
+{
+	struct exynos5_power *power =
+		(struct exynos5_power *)samsung_get_base_power();
+
+	return power->inform1;
+}
+
+void ps_hold_setup(void)
+{
+	struct exynos5_power *power =
+		(struct exynos5_power *)samsung_get_base_power();
+
+	/* Set PS-Hold high */
+	setbits_le32(&power->ps_hold_control,
+			EXYNOS_PS_HOLD_CONTROL_DATA_HIGH);
+}
+
+void power_exit_wakeup(void)
+{
+	struct exynos5_power *power =
+		(struct exynos5_power *)samsung_get_base_power();
+	typedef void (*resume_func)(void);
+
+	((resume_func)power->inform0)();
+}
diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h
index d2fdb59..3e83f55 100644
--- a/arch/arm/include/asm/arch-exynos/power.h
+++ b/arch/arm/include/asm/arch-exynos/power.h
@@ -864,4 +864,9 @@ void set_dp_phy_ctrl(unsigned int enable);
 
 #define EXYNOS_DP_PHY_ENABLE		(1 << 0)
 
+#define EXYNOS_PS_HOLD_CONTROL_DATA_HIGH	(1 << 8)
+
+uint32_t power_read_reset_status(void);
+void ps_hold_setup(void);
+void power_exit_wakeup(void);
 #endif
-- 
1.7.4.4