[U-Boot] [PATCH 00/10] Add Marvell Dove and SolidRun CuBox

[Albert ARIBAUD]

Hi Sebastian,

On Sun,  2 Dec 2012 15:36:12 +0100, Sebastian Hesselbarth
<sebastian.hesselbarth at gmail.com> wrote:
> This patch set add support for the Marvell Dove 88AP510 SoC and
> the SolidRun CuBox board based on that SoC. The patch set is divided
> into the four following sections:
> 
> (1) Patches 1-5:
> Add support for the Dove SoC and related drivers. Where possible
> drivers from Marvell Kirkwood are reused (mvsata, mvgbe), or
> forked to allow more generic usage (SPI, GPIO). The SDHCI driver
> is different and a new driver is added for it. The forked drivers
> can also be reused on Kirkwood but that would have required patching
> existing boards.
> 
> (2) Patches 6-8:
> Allow mvgbe to use the phylib API, add support for 88E1310 PHY and
> allow Dove to use the driver.
> 
> (3) Patch 9
> Add the SolidRun CuBox as the first board based on Marvell Dove SoC.
> 
> (4) Patch 10
> Add support for different UART boot mode found on Dove.
> 
> Sebastian Hesselbarth (10):
>   ARM: dove: add support for Marvell Dove SoC
>   GPIO: add gpio driver for Orion SoCs
>   MMC: sdhci: Add support for dove sdhci
>   SPI: Add Orion SPI driver
>   block: mvsata: add dove include
>   NET: phy: add 88E1310 PHY initialization
>   NET: mvgbe: add phylib support
>   NET: mvgbe: add support for Dove
>   Boards: Add support for SolidRun CuBox
>   tools: Add support for Dove to kwboot

Just a general remark: as this is a new support patch, it will only go
in during next merge window; so when kirkwood or ARM pull requests are
sent, make sure your patch set still applies to the new tree tip and if
not, fix and submit a new version that does apply.

(mentioning this because you're touching files that I'm pretty sure are
being modified by changes that *will* go in 2013.01)

Amicalement,
-- 
Albert.