[U-Boot] [PATCH resend 7/7] mtd/st_smi: Add mtd support for smi
Vipin Kumar
vipin.kumar at st.com
Thu Dec 6 07:21:24 CET 2012
This patch adds mtd device support for smi devices
Signed-off-by: Vipin Kumar <vipin.kumar at st.com>
---
drivers/mtd/st_smi.c | 167 ++++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 165 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/st_smi.c b/drivers/mtd/st_smi.c
index 0e529a4..4d1a6bd 100644
--- a/drivers/mtd/st_smi.c
+++ b/drivers/mtd/st_smi.c
@@ -24,6 +24,7 @@
#include <common.h>
#include <flash.h>
#include <linux/err.h>
+#include <linux/mtd/mtd.h>
#include <linux/mtd/st_smi.h>
#include <asm/io.h>
@@ -37,6 +38,14 @@ static ulong bank_base[CONFIG_SYS_MAX_FLASH_BANKS] =
CONFIG_SYS_FLASH_ADDR_BASE;
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
+#if defined(CONFIG_MTD_DEVICE)
+/* MTD interface for SMI devices */
+static struct mtd_info smi_mtd_info[CONFIG_SYS_MAX_FLASH_BANKS];
+static char smi_mtd_names[CONFIG_SYS_MAX_FLASH_BANKS][16];
+
+static int smi_mtd_init(void);
+#endif
+
/* data structure to maintain flash ids from different vendors */
struct flash_device {
char *name;
@@ -482,7 +491,9 @@ unsigned long flash_init(void)
{
unsigned long size = 0;
int i, j;
-
+#if defined(CONFIG_MTD_DEVICE)
+ int error;
+#endif
smi_init();
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
@@ -498,6 +509,12 @@ unsigned long flash_init(void)
}
+#if defined(CONFIG_MTD_DEVICE)
+ error = smi_mtd_init();
+ if (error < 0)
+ return 0;
+#endif
+
return size;
}
@@ -599,4 +616,150 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
puts(" done\n");
return rcode;
}
-#endif
+
+#if defined(CONFIG_MTD_DEVICE)
+static int smi_mtd_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+ flash_info_t *fi = mtd->priv;
+ size_t a_start = fi->start[0] + instr->addr;
+ size_t a_end = a_start + instr->len;
+ int s_first = -1;
+ int s_last = -1;
+ int error, sect;
+
+ for (sect = 0; sect < fi->sector_count; sect++) {
+ if (a_start == fi->start[sect])
+ s_first = sect;
+
+ if (sect < fi->sector_count - 1) {
+ if (a_end == fi->start[sect + 1]) {
+ s_last = sect;
+ break;
+ }
+ } else {
+ s_last = sect;
+ break;
+ }
+ }
+
+ if (s_first >= 0 && s_first <= s_last) {
+ instr->state = MTD_ERASING;
+
+ error = flash_erase(fi, s_first, s_last);
+ if (error) {
+ instr->state = MTD_ERASE_FAILED;
+ return -EIO;
+ }
+
+ instr->state = MTD_ERASE_DONE;
+ mtd_erase_callback(instr);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int smi_mtd_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ flash_info_t *fi = mtd->priv;
+ u_char *f = (u_char *)(fi->start[0]) + from;
+
+ memcpy(buf, f, len);
+ *retlen = len;
+
+ return 0;
+}
+
+static int smi_mtd_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+{
+ flash_info_t *fi = mtd->priv;
+ u_long t = fi->start[0] + to;
+ int error;
+
+ error = write_buff(fi, (u_char *)buf, t, len);
+ if (!error) {
+ *retlen = len;
+ return 0;
+ }
+
+ return -EIO;
+}
+
+static void smi_mtd_sync(struct mtd_info *mtd)
+{
+ /*
+ * This function should wait until all pending operations
+ * finish. However this driver is fully synchronous, so
+ * this function returns immediately
+ */
+}
+
+static int smi_mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+ flash_info_t *fi = mtd->priv;
+
+ flash_protect(FLAG_PROTECT_SET, fi->start[0] + ofs,
+ fi->start[0] + ofs + len - 1, fi);
+ return 0;
+}
+
+static int smi_mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+ flash_info_t *fi = mtd->priv;
+
+ flash_protect(FLAG_PROTECT_CLEAR, fi->start[0] + ofs,
+ fi->start[0] + ofs + len - 1, fi);
+ return 0;
+}
+
+static int smi_mtd_init(void)
+{
+ struct flash_device *flash_device_p;
+ struct mtd_info *mtd;
+ flash_info_t *fi;
+ int i;
+
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
+ fi = &flash_info[i];
+
+ if (!fi->size)
+ continue;
+
+ flash_device_p = get_flash_device(fi->flash_id);
+ if (!flash_device_p)
+ return -EIO;
+
+ mtd = &smi_mtd_info[i];
+
+ memset(mtd, 0, sizeof(struct mtd_info));
+
+ /* Uniform erase sizes for all sectors */
+ mtd->numeraseregions = 0;
+ mtd->erasesize = flash_device_p->sectorsize;
+
+ sprintf(smi_mtd_names[i], "nor%d", i);
+ mtd->name = smi_mtd_names[i];
+ mtd->type = MTD_NORFLASH;
+ mtd->flags = MTD_CAP_NORFLASH;
+ mtd->size = fi->size;
+ mtd->writesize = 1;
+
+ mtd->erase = smi_mtd_erase;
+ mtd->read = smi_mtd_read;
+ mtd->write = smi_mtd_write;
+ mtd->sync = smi_mtd_sync;
+ mtd->lock = smi_mtd_lock;
+ mtd->unlock = smi_mtd_unlock;
+ mtd->priv = fi;
+
+ if (add_mtd_device(mtd))
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+#endif /* CONFIG_MTD_DEVICE */
+
+#endif /* CONFIG_SYS_NO_FLASH */
--
1.8.0
More information about the U-Boot
mailing list