[U-Boot] [PATCH 1/8] EXYNOS5: FDT: Add TMU device node values

Simon Glass sjg at chromium.org
Wed Dec 12 15:51:26 CET 2012


Hi Hatim,

On Tue, Dec 11, 2012 at 2:54 AM, Hatim Ali <hatim.rv at samsung.com> wrote:
> From: Akshay Saraswat <akshay.s at samsung.com>
>
> Fdt entry for Exynos TMU driver specific pre-defined values used for
> calibration of current temperature and defining threshold values.
>
> Signed-off-by: Akshay Saraswat <akshay.s at samsung.com>
> Acked-by: Simon Glass <sjg at chromium.org>
>
> diff --git a/arch/arm/dts/exynos5250.dtsi b/arch/arm/dts/exynos5250.dtsi
> index fa4d498..db22db6 100644
> --- a/arch/arm/dts/exynos5250.dtsi
> +++ b/arch/arm/dts/exynos5250.dtsi
> @@ -28,4 +28,9 @@
>                 #address-cells = <1>;
>                 #size-cells = <0>;
>         };
> +
> +       tmu at 10060000 {
> +               compatible = "samsung,exynos-tmu";
> +               reg = <0x10060000 0xffff>;

I think the ffff should be 0x10000.

> +       };
>  };
> diff --git a/board/samsung/dts/exynos5250-smdk5250.dts b/board/samsung/dts/exynos5250-smdk5250.dts
> index b6fbb67..2d3ecca 100644
> --- a/board/samsung/dts/exynos5250-smdk5250.dts
> +++ b/board/samsung/dts/exynos5250-smdk5250.dts
> @@ -26,4 +26,17 @@
>                         phy-mode = "mii";
>                 };
>         };
> +
> +       tmu at 10060000 {
> +               samsung,mux             = <6>;
> +               samsung,min-temp        = <25>;
> +               samsung,max-temp        = <125>;
> +               samsung,start-warning   = <95>;
> +               samsung,start-tripping  = <105>;
> +               samsung,efuse-min-value = <40>;
> +               samsung,efuse-value     = <55>;
> +               samsung,efuse-max-value = <100>;
> +               samsung,slope           = <268470274>;
> +               samsung,dc-value        = <25>;
> +       };
>  };
> diff --git a/doc/device-tree-bindings/exynos/tmu.txt b/doc/device-tree-bindings/exynos/tmu.txt
> new file mode 100644
> index 0000000..99e7164
> --- /dev/null
> +++ b/doc/device-tree-bindings/exynos/tmu.txt
> @@ -0,0 +1,35 @@
> +Exynos Thermal management Unit
> +
> +The device node for TMU that is a part of Exynos5250
> +SOC is as described in the document "Open Firmware Recommended
> +Practic : Universal Serial Bus" with the following modifications
> +and additions:
> +
> +Required properties :
> + - compatible : Should be "samsung,exynos-tmu" for TMU
> + - samsung,mux : mux Address for the TMU to enable TMU core:
> + - samsung,min-temp : Minimum temperature, default is 25:
> + - samsung,max-temp : Maximum temperature, defalut set to 125:
> + - samsung,start-warning : temp at which TMU start giving warning:
> + - samsung,start-tripping : temp at which system will trip and shutdown:
> + - samsung,efuse-min-value : SOC efuse min value:
> + - samsung,efuse-value : SOC actual efuse value:
> + - samsung,efuse-max-value : SoC max efuse value:
> + - samsung,slope : Gain of amplifier, default is 268470274:
> + - samsung,dc-value : DC value of TMU, default is 25:

Can you add a few more details here on these last 5? The units of each
should be listed (and for temperature above which I think is degrees
C). The 'slope' in particular is a very large random number which
could do with some docs. Also re samsung.mux, what are the available
options?

Also remove : at the end of lines.


> +
> +Example:
> +
> +tmu at 10060000 {
> +       compatible = "samsung,exynos-tmu"
> +       samsung,mux = <6>;
> +       samsung,min-temp = <25>;
> +       samsung,max-temp = <125>;
> +       samsung,start-warning = <95>;
> +       samsung,start-tripping = <105>;
> +       samsung,efuse-min-value = <40>;
> +       samsung,efuse-value = <55>;
> +       samsung,efuse-max-value = <100>;
> +       samsung,slope = <268470274>;
> +       samsung,dc-value = <25>;
> +};
> diff --git a/include/fdtdec.h b/include/fdtdec.h
> index da3c85f..2d74cec 100644
> --- a/include/fdtdec.h
> +++ b/include/fdtdec.h
> @@ -70,6 +70,7 @@ enum fdt_compat_id {
>         COMPAT_NVIDIA_TEGRA20_DC,       /* Tegra 2 Display controller */
>         COMPAT_SMSC_LAN9215,            /* SMSC 10/100 Ethernet LAN9215 */
>         COMPAT_SAMSUNG_EXYNOS5_SROMC,   /* Exynos5 SROMC */
> +       COMPAT_SAMSUNG_EXYNOS_TMU,      /* Exynos TMU */
>
>         COMPAT_COUNT,
>  };
> diff --git a/lib/fdtdec.c b/lib/fdtdec.c
> index 85e733c..2b9df7f 100644
> --- a/lib/fdtdec.c
> +++ b/lib/fdtdec.c
> @@ -47,6 +47,7 @@ static const char * const compat_names[COMPAT_COUNT] = {
>         COMPAT(NVIDIA_TEGRA20_DC, "nvidia,tegra20-dc"),
>         COMPAT(SMSC_LAN9215, "smsc,lan9215"),
>         COMPAT(SAMSUNG_EXYNOS5_SROMC, "samsung,exynos-sromc"),
> +       COMPAT(SAMSUNG_EXYNOS_TMU, "samsung,exynos-tmu"),
>  };
>
>  const char *fdtdec_get_compatible(enum fdt_compat_id id)
> --
> 1.7.2.3
>

Regards,
Simon


More information about the U-Boot mailing list