[U-Boot] [PATCH 01/10] ARM: dove: add support for Marvell Dove SoC
Sebastian Hesselbarth
sebastian.hesselbarth at gmail.com
Sun Dec 2 15:36:13 CET 2012
This patch adds initial support for the armv7-based Marvell Dove SoC
(88AP510).
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
---
Cc: u-boot at lists.denx.de
Cc: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
Cc: Rabeeh Khoury <rabeeh at solid-run.com>
Cc: Albert Aribaud <albert.u.boot at aribaud.net>
Cc: Prafulla Wadaskar <prafulla at marvell.com>
Cc: Andy Fleming <afleming at gmail.com>
Cc: Joe Hershberger <joe.hershberger at gmail.com>
Cc: Daniel Stodden <daniel.stodden at gmail.com>
Cc: Dieter Kiermaier <dk-arm-linux at gmx.de>
---
arch/arm/cpu/armv7/dove/Makefile | 49 +++++
arch/arm/cpu/armv7/dove/cpu.c | 266 ++++++++++++++++++++++++++
arch/arm/cpu/armv7/dove/dram.c | 116 +++++++++++
arch/arm/cpu/armv7/dove/lowlevel_init.S | 83 ++++++++
arch/arm/cpu/armv7/dove/mpp.c | 319 +++++++++++++++++++++++++++++++
arch/arm/cpu/armv7/dove/timer.c | 176 +++++++++++++++++
arch/arm/cpu/armv7/dove/usb.c | 101 ++++++++++
arch/arm/include/asm/arch-dove/config.h | 153 +++++++++++++++
arch/arm/include/asm/arch-dove/cpu.h | 204 ++++++++++++++++++++
arch/arm/include/asm/arch-dove/dove.h | 93 +++++++++
arch/arm/include/asm/arch-dove/gpio.h | 35 ++++
arch/arm/include/asm/arch-dove/mpp.h | 283 +++++++++++++++++++++++++++
12 files changed, 1878 insertions(+)
create mode 100644 arch/arm/cpu/armv7/dove/Makefile
create mode 100644 arch/arm/cpu/armv7/dove/cpu.c
create mode 100644 arch/arm/cpu/armv7/dove/dram.c
create mode 100644 arch/arm/cpu/armv7/dove/lowlevel_init.S
create mode 100644 arch/arm/cpu/armv7/dove/mpp.c
create mode 100644 arch/arm/cpu/armv7/dove/timer.c
create mode 100644 arch/arm/cpu/armv7/dove/usb.c
create mode 100644 arch/arm/include/asm/arch-dove/config.h
create mode 100644 arch/arm/include/asm/arch-dove/cpu.h
create mode 100644 arch/arm/include/asm/arch-dove/dove.h
create mode 100644 arch/arm/include/asm/arch-dove/gpio.h
create mode 100644 arch/arm/include/asm/arch-dove/mpp.h
diff --git a/arch/arm/cpu/armv7/dove/Makefile b/arch/arm/cpu/armv7/dove/Makefile
new file mode 100644
index 0000000..127d67e
--- /dev/null
+++ b/arch/arm/cpu/armv7/dove/Makefile
@@ -0,0 +1,49 @@
+#
+# Marvell Dove SoC Makefile
+#
+# Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC).o
+
+SOBJS += lowlevel_init.o
+COBJS-y := cpu.o dram.o timer.o mpp.o
+COBJS-$(CONFIG_USB_EHCI_MARVELL) += usb.o
+
+COBJS := $(COBJS-y)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/armv7/dove/cpu.c b/arch/arm/cpu/armv7/dove/cpu.c
new file mode 100644
index 0000000..b9e708c
--- /dev/null
+++ b/arch/arm/cpu/armv7/dove/cpu.c
@@ -0,0 +1,266 @@
+/*
+ * Marvell Dove SoC cpu related functions
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/cache.h>
+#include <u-boot/md5.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/dove.h>
+#include <hush.h>
+
+void reset_cpu(unsigned long ignored)
+{
+ struct dovecpu_registers *cpureg =
+ (struct dovecpu_registers *)DOVE_CPU_REG_BASE;
+
+ /* Enable soft reset to assert RSTOUTn */
+ writel(readl(&cpureg->rstoutn_mask) | (1 << 2),
+ &cpureg->rstoutn_mask);
+ /* Assert soft reset */
+ writel(readl(&cpureg->sys_soft_rst) | 1,
+ &cpureg->sys_soft_rst);
+ do {} while (1);
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int dove_print_cpu(void)
+{
+ char *cpu;
+ u32 idreg;
+ u16 part, rev;
+
+ __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0" : "=r"(idreg));
+
+ part = (idreg >> ARM_ID_PARTNUM_OFFSET) & ARM_ID_PARTNUM_MASK;
+ rev = (idreg >> ARM_ID_REVISION_OFFSET) & ARM_ID_REVISION_MASK;
+
+ switch (part) {
+ case DOVECPU_PART_SHEEVA:
+ cpu = "Marvell Sheeva";
+ break;
+ default:
+ cpu = "Unknown CPU";
+ }
+
+ printf("CPU: %s (rev %d)\n", cpu, rev);
+ return 0;
+}
+
+int dove_print_soc(void)
+{
+ char *soc, *rev;
+ u16 devid = (readl(DOVE_REG_PCIE_DEVID) >> 16) & 0xffff;
+ u8 revid = readl(DOVE_REG_PCIE_REVID) & 0xff;
+
+ switch (devid) {
+ case DOVESOC_DEVID_AP510:
+ soc = "AP510";
+ break;
+ case DOVESOC_DEVID_F6781:
+ soc = "F6781";
+ break;
+ default:
+ printf("ERROR.. %s: Unsupported SoC %04x\n", __func__, devid);
+ return -1;
+ }
+
+ switch (revid) {
+ case DOVESOC_REVID_Z0:
+ rev = "Z0";
+ break;
+ case DOVESOC_REVID_Z1:
+ rev = "Z1";
+ break;
+ case DOVESOC_REVID_Y0:
+ rev = "Y0";
+ break;
+ case DOVESOC_REVID_Y1:
+ rev = "Y1";
+ break;
+ case DOVESOC_REVID_X0:
+ rev = "X0";
+ break;
+ case DOVESOC_REVID_A0:
+ rev = "A0";
+ break;
+ case DOVESOC_REVID_A1:
+ rev = "A1";
+ break;
+ default:
+ rev = "Unknown revision";
+ };
+
+ printf("SoC: Dove 88%s (%s)\n", soc, rev);
+ return 0;
+}
+
+int print_cpuinfo(void)
+{
+ if (dove_print_soc())
+ return -1;
+ if (dove_print_cpu())
+ return -1;
+ return 0;
+}
+#endif /* CONFIG_DISPLAY_CPUINFO */
+
+/*
+ * dove_init_gpio - initial GPIO configuration
+ */
+void dove_init_gpio(struct dove_gpio_init *gpp)
+{
+ struct dovegpio_registers *gpio0reg =
+ (struct dovegpio_registers *)DOVE_GPIO0_BASE;
+ struct dovegpio_registers *gpio1reg =
+ (struct dovegpio_registers *)DOVE_GPIO1_BASE;
+ struct dovegpio_registers *gpio2reg =
+ (struct dovegpio_registers *)DOVE_GPIO2_BASE;
+
+ /* Init GPIOS to default values as per board requirement */
+ writel(gpp->val0, &gpio0reg->dout);
+ writel(gpp->val1, &gpio1reg->dout);
+ writel(gpp->val2, &gpio2reg->dout);
+ writel(gpp->oe0_n, &gpio0reg->oe);
+ writel(gpp->oe1_n, &gpio1reg->oe);
+ writel(gpp->oe2_n, &gpio2reg->oe);
+}
+
+/*
+ * Window Size
+ * Used with the Base register to set the address window size and location.
+ * Must be programmed from LSB to MSB as sequence of ones followed by
+ * sequence of zeros. The number of ones specifies the size of the window in
+ * 64 KByte granularity (e.g., a value of 0x00FF specifies 256 = 16 MByte).
+ * NOTE: A value of 0x0 specifies 64-KByte size.
+ */
+unsigned int dove_winctrl_calcsize(unsigned int sizeval)
+{
+ int i;
+ unsigned int j = 0;
+ u32 val = sizeval >> 1;
+
+ for (i = 0; val >= 0x10000; i++) {
+ j |= (1 << i);
+ val = val >> 1;
+ }
+ return 0x0000ffff & j;
+}
+
+/*
+ * dove_config_adr_windows - Configure address Windows
+ *
+ * There are 8 address windows supported by Dove Soc to addess different
+ * devices. Windows 0-3 can be configured for size, BAR and remap addr.
+ * Windows 4-7 can be configured for size and BAR.
+ * Below configuration is standard for most of the cases
+ *
+ * If remap function not used, remap_lo must be set as base
+ */
+int dove_config_adr_windows(void)
+{
+ struct dovewin_registers *winregs =
+ (struct dovewin_registers *)DOVE_CPU_WIN_BASE;
+
+ /* Window 0: 1M PCIE0 IO address space */
+ writel(DOVECPU_WIN_CTRL_DATA(SZ_1M, DOVECPU_TARGET_PCIE0,
+ DOVECPU_ATTR_PCIE_IO, DOVECPU_WIN_ENABLE), &winregs[0].ctrl);
+
+ writel(DOVE_DEFADR_PCIE0_IO, &winregs[0].base);
+ writel(DOVE_DEFADR_PCIE0_IO_REMAP, &winregs[0].remap_lo);
+ writel(0x0, &winregs[0].remap_hi);
+
+ /* Window 1: 1M PCIE1 IO address space */
+ writel(DOVECPU_WIN_CTRL_DATA(SZ_1M, DOVECPU_TARGET_PCIE1,
+ DOVECPU_ATTR_PCIE_IO, DOVECPU_WIN_ENABLE), &winregs[1].ctrl);
+
+ writel(DOVE_DEFADR_PCIE1_IO, &winregs[1].base);
+ writel(DOVE_DEFADR_PCIE1_IO_REMAP, &winregs[1].remap_lo);
+ writel(0x0, &winregs[1].remap_hi);
+
+ /* Window 2: 128M PCIE0 MEM address space */
+ writel(DOVECPU_WIN_CTRL_DATA(SZ_128M, DOVECPU_TARGET_PCIE0,
+ DOVECPU_ATTR_PCIE_MEM, DOVECPU_WIN_ENABLE), &winregs[2].ctrl);
+
+ writel(DOVE_DEFADR_PCIE0_MEM, &winregs[2].base);
+ writel(DOVE_DEFADR_PCIE0_MEM, &winregs[2].remap_lo);
+ writel(0x0, &winregs[2].remap_hi);
+
+ /* Window 3: 128M PCIE1 MEM address space */
+ writel(DOVECPU_WIN_CTRL_DATA(SZ_128M, DOVECPU_TARGET_PCIE1,
+ DOVECPU_ATTR_PCIE_MEM, DOVECPU_WIN_ENABLE), &winregs[3].ctrl);
+
+ writel(DOVE_DEFADR_PCIE1_MEM, &winregs[3].base);
+ writel(DOVE_DEFADR_PCIE1_MEM, &winregs[3].remap_lo);
+ writel(0x0, &winregs[3].remap_hi);
+
+ /* Window 4: 1M Cryptographic SRAM address space */
+ writel(DOVECPU_WIN_CTRL_DATA(SZ_1M, DOVECPU_TARGET_SASRAM,
+ DOVECPU_ATTR_SASRAM, DOVECPU_WIN_ENABLE), &winregs[4].ctrl);
+ writel(DOVE_DEFADR_SASRAM, &winregs[4].base);
+
+ /* Window 5: 128M Bootrom address space */
+ writel(DOVECPU_WIN_CTRL_DATA(SZ_128M, DOVECPU_TARGET_BOOTROM,
+ DOVECPU_ATTR_BOOTROM, DOVECPU_WIN_ENABLE), &winregs[5].ctrl);
+ writel(DOVE_DEFADR_BOOTROM, &winregs[5].base);
+
+ /* Window 6: 1M PMU Scratchpad address space */
+ writel(DOVECPU_WIN_CTRL_DATA(SZ_1M, DOVECPU_TARGET_PMURAM,
+ DOVECPU_ATTR_PMURAM, DOVECPU_WIN_ENABLE), &winregs[6].ctrl);
+ writel(DOVE_DEFADR_PMURAM, &winregs[6].base);
+
+ /* Window 7: Disabled */
+ writel(DOVECPU_WIN_DISABLE, &winregs[7].ctrl);
+
+ return 0;
+}
+
+#ifdef CONFIG_ARCH_CPU_INIT
+int arch_cpu_init(void)
+{
+ dove_config_adr_windows();
+#ifdef CONFIG_USB_EHCI_MARVELL
+ dove_ehci_phy_init(0);
+ dove_ehci_phy_init(1);
+#endif /* CONFIG_USB_EHCI_MARVELL */
+ return 0;
+}
+#endif /* CONFIG_ARCH_CPU_INIT */
+
+void enable_caches(void)
+{
+#ifndef CONFIG_SYS_DCACHE_OFF
+ /* Enable D-cache. I-cache is already enabled in lowlevel_init.S */
+ dcache_enable();
+#endif /* CONFIG_SYS_DCACHE_OFF */
+}
+
+#ifdef CONFIG_MVGBE
+int cpu_eth_init(bd_t *bis)
+{
+ mvgbe_initialize(bis);
+ return 0;
+}
+#endif /* CONFIG_MVGBE */
diff --git a/arch/arm/cpu/armv7/dove/dram.c b/arch/arm/cpu/armv7/dove/dram.c
new file mode 100644
index 0000000..f5e8246
--- /dev/null
+++ b/arch/arm/cpu/armv7/dove/dram.c
@@ -0,0 +1,116 @@
+/*
+ * Marvell Dove SoC DRAM initialization
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/dove.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define DOVE_REG_DRAM_MAP(x) (DOVE_REGISTER(0x800100) + (x * 0x10))
+#define DRAM_START_MASK 0xff800000
+#define DRAM_SIZE_MASK 0xf
+#define DRAM_SIZE_SHIFT 16
+
+/*
+ * dove_sdram_start - reads start from Memory Address Map Register n
+ */
+u32 dove_dram_start(enum memory_bank bank)
+{
+ u32 reg = readl(DOVE_REG_DRAM_MAP(bank));
+ u32 enable = 0x01 & reg;
+
+ if ((!enable) || (bank > BANK1))
+ return 0;
+
+ return reg & DRAM_START_MASK;
+}
+
+/*
+ * dove_sdram_size - reads size from Memory Address Map Register n
+ */
+u32 dove_dram_size(enum memory_bank bank)
+{
+ u32 reg = readl(DOVE_REG_DRAM_MAP(bank));
+ u32 enable = 0x01 & reg;
+ u32 size;
+
+ if ((!enable) || (bank > BANK1))
+ return 0;
+
+ /*
+ * area_length: 7 = 8M, 8 = 16M, ..., 15 = 2048M
+ * size = 1 << (area_length + 16)
+ */
+ size = (reg >> DRAM_SIZE_SHIFT) & DRAM_SIZE_MASK;
+ size = 1 << (size + 16);
+ return size;
+}
+
+#ifndef CONFIG_SYS_BOARD_DRAM_INIT
+int dram_init(void)
+{
+ int i;
+
+ gd->ram_size = 0;
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ gd->bd->bi_dram[i].start = dove_dram_start(i);
+ gd->bd->bi_dram[i].size = dove_dram_size(i);
+
+ /*
+ * It is assumed that all memory banks are consecutive
+ * and without gaps.
+ * If the gap is found, ram_size will be reported for
+ * consecutive memory only
+ */
+ if (gd->bd->bi_dram[i].start != gd->ram_size)
+ break;
+
+ gd->ram_size += gd->bd->bi_dram[i].size;
+
+ }
+
+ for (; i < CONFIG_NR_DRAM_BANKS; i++) {
+ /* If above loop terminated prematurely, we need to set
+ * remaining banks' start address & size as 0. Otherwise other
+ * u-boot functions and Linux kernel gets wrong values which
+ * could result in crash */
+ gd->bd->bi_dram[i].start = 0;
+ gd->bd->bi_dram[i].size = 0;
+ }
+
+ return 0;
+}
+
+/*
+ * If this function is not defined here,
+ * board.c alters dram bank zero configuration defined above.
+ */
+void dram_init_banksize(void)
+{
+ dram_init();
+}
+#endif /* CONFIG_SYS_BOARD_DRAM_INIT */
diff --git a/arch/arm/cpu/armv7/dove/lowlevel_init.S b/arch/arm/cpu/armv7/dove/lowlevel_init.S
new file mode 100644
index 0000000..105d12d
--- /dev/null
+++ b/arch/arm/cpu/armv7/dove/lowlevel_init.S
@@ -0,0 +1,83 @@
+/*
+ * Marvell Dove SoC icache and reg base low level init
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/arch/dove.h>
+#include <generated/asm-offsets.h>
+#include <linux/linkage.h>
+
+/*
+ * Enable Tauros2 L2 ICache
+ */
+.macro init_l2cc
+ mrc 15, 0, r0, c1, c0, 1
+ orr r0, r0, #0x2
+ mcr 15, 0, r0, c1, c0, 1
+.endm /* init_l2cc */
+
+/*
+ * Init internal register base addresses
+ */
+.macro init_reg_base
+ /* set SB reg base to 0xf1000000 */
+ ldr r1, =(DOVE_PREMAP_INT_REGS_BASE_ADDR)
+ ldr r6, =DOVE_SB_REGS_PHYS_BASE
+ str r6, [r1]
+
+ /* set NB reg base to 0xf1800000 */
+ ldr r1, =(DOVE_CPU_CTRL_REG)
+ ldr r4, =0xffff0000
+ ldr r6, [r1]
+ and r6, r6, r4
+ ldr r4, =DOVE_NB_REGS_PHYS_BASE
+ lsr r4, r6, #16
+ orr r6, r6, r4
+ str r6, [r1]
+
+ /* Set AXI bridge address mapping to 0xf1800000 */
+ ldr r1, =(DOVE_AXI_CTRL_REG)
+ ldr r4, =0x007fffff
+ ldr r6, [r1]
+ and r6, r6, r4
+ ldr r4, =DOVE_NB_REGS_PHYS_BASE
+ orr r6, r6, r4
+ str r6, [r1]
+
+ /* set MC configuration register decode address to 0xf1800000 */
+ ldr r1, =(DOVE_PREMAP_MC_DECODE_REG)
+ ldr r4, =0x0000ffff
+ ldr r6, [r1]
+ and r6, r6, r4
+ ldr r4, =DOVE_NB_REGS_PHYS_BASE
+ orr r6, r6, r4
+ str r6, [r1]
+
+.endm /* init_reg_base */
+
+.section ".text.init", "x"
+
+ENTRY(lowlevel_init)
+ init_l2cc
+ init_reg_base
+
+ /* r12 saved upper lr*/
+ mov pc,lr
+ENDPROC(lowlevel_init)
diff --git a/arch/arm/cpu/armv7/dove/mpp.c b/arch/arm/cpu/armv7/dove/mpp.c
new file mode 100644
index 0000000..6722858
--- /dev/null
+++ b/arch/arm/cpu/armv7/dove/mpp.c
@@ -0,0 +1,319 @@
+/*
+ * Marvell Dove SoC MPP pinmux
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/dove.h>
+#include <asm/arch/mpp.h>
+#include <asm/arch/gpio.h>
+
+#define MPP_BITS 4
+#define MPP_MASK 0xf
+#define MPPS_PER_REG 8
+
+#define MPP_NUM(_x) ((_x) & 0xff)
+#define MPP_SEL(_x) (((_x) >> 8) & 0x1f)
+#define MPP_GPIO(_x) ((_x) & (1 << 15))
+
+#define MPP_CTRL(i) (DOVE_MPP_BASE + (i * MPP_BITS))
+#define MPP_PMU_GENERAL_CTRL (DOVE_MPP_BASE + 0x010)
+#define PMUG_AUDIO0_AC97_SEL (1 << 16)
+#define MPP4_CTRL (DOVE_MPP_BASE + 0x240)
+#define MPP4_SDIO0_GPIO_SEL (1 << 0)
+#define MPP4_SDIO1_GPIO_SEL (1 << 1)
+#define MPP4_CAMERA_GPIO_SEL (1 << 2)
+#define MPP4_AUDIO1_GPIO_SEL (1 << 3)
+#define MPP4_UART1_GPIO_SEL (1 << 4)
+#define MPP4_SPI_GPIO_SEL (1 << 5)
+#define MPP_GENERAL_CTRL (DOVE_PDMA_BASE + 0x403c)
+#define MPPG_NAND_GPIO_SEL (1 << 0)
+#define MPPG_AUDIO1_SPDIFO_GPIO_SEL (1 << 1)
+#define GENERAL_CONFIG_1 (DOVE_PDMA_BASE + 0x002c)
+#define GENERAL_TWSI_MUXEN_OPTION1 (1 << 7)
+#define GENERAL_CONFIG_2 (DOVE_PDMA_BASE + 0x0030)
+#define GENERAL_TWSI_OPTION3_SEL (1 << 22)
+#define GENERAL_TWSI_MUXEN_OPTION3 (1 << 21)
+#define GENERAL_TWSI_MUXEN_OPTION2 (1 << 20)
+#define SSP_CONFIG_STATUS_1 (DOVE_PDMA_BASE + 0x0034)
+#define SSP_SSP_ON_AUDIO1 (1 << 0)
+
+/*
+ * MPP0-23 have standard MPP register layout
+ */
+static void dove_mpp_std_set(u16 config)
+{
+ u8 num = MPP_NUM(config);
+ u32 off = (num / MPPS_PER_REG) * MPP_BITS;
+ u32 shift = (num % MPPS_PER_REG) * MPP_BITS;
+ u32 reg;
+
+ /* configure standard MPP pin */
+ reg = readl(MPP_CTRL(off));
+ reg &= ~(MPP_MASK << shift);
+ reg |= MPP_SEL(config) << shift;
+ writel(reg, MPP_CTRL(off));
+
+ /* configure gpio capabilities */
+ if (MPP_GPIO(config))
+ orion_gpio_set_valid(num, GPIO_INPUT_OK | GPIO_OUTPUT_OK);
+ else
+ orion_gpio_set_valid(num, 0);
+}
+
+/*
+ * MPP0-15 also allow to mux PMU functions
+ */
+static void dove_mpp_pmu_set(u16 config)
+{
+ u8 num = MPP_NUM(config);
+
+ if (MPP_SEL(config) == PMU) {
+ /* enable PMU on MPP */
+ writel(readl(MPP_PMU_GENERAL_CTRL) | (1 << num),
+ MPP_PMU_GENERAL_CTRL);
+ /* disable gpio capabilities */
+ orion_gpio_set_valid(num, 0);
+ } else {
+ /* disable PMU on MPP */
+ writel(readl(MPP_PMU_GENERAL_CTRL) & ~(1 << num),
+ MPP_PMU_GENERAL_CTRL);
+ /* configure MPP */
+ dove_mpp_std_set(config);
+ }
+}
+
+/*
+ * MPP groups on MPP4_CTRL have different register layout
+ * and allow GPIO or special function only
+ */
+static void dove_mpp4_set(u16 config)
+{
+ u32 reg = readl(MPP4_CTRL);
+ u32 mask;
+ u8 n, nmin, nmax;
+ int gpio;
+
+ switch (MPP_NUM(config)) {
+ case MPP_CAMERA:
+ mask = MPP4_CAMERA_GPIO_SEL;
+ nmin = MPP_CAMERA;
+ nmax = MPP_CAMERA_MAX;
+ break;
+ case MPP_SDIO0:
+ mask = MPP4_SDIO0_GPIO_SEL;
+ nmin = MPP_SDIO0;
+ nmax = MPP_SDIO0_MAX;
+ break;
+ case MPP_SDIO1:
+ mask = MPP4_SDIO1_GPIO_SEL;
+ nmin = MPP_SDIO1;
+ nmax = MPP_SDIO1_MAX;
+ break;
+ case MPP_SPI:
+ mask = MPP4_SPI_GPIO_SEL;
+ nmin = MPP_SPI;
+ nmax = MPP_SPI_MAX;
+ break;
+ case MPP_UART1:
+ mask = MPP4_UART1_GPIO_SEL;
+ nmin = MPP_UART1;
+ nmax = MPP_UART1_MAX;
+ break;
+ default:
+ return;
+ }
+
+ reg &= ~mask;
+ if (MPP_SEL(config))
+ reg |= mask;
+ writel(reg, MPP4_CTRL);
+
+ /* configure gpio capabilities */
+ gpio = 0;
+ if (MPP_GPIO(config))
+ gpio = GPIO_INPUT_OK | GPIO_OUTPUT_OK;
+ for (n = nmin; n <= nmax; n++)
+ orion_gpio_set_valid(n, gpio);
+}
+
+/*
+ * MPP_GENERAL_CTRL allows GPIO on NAND pins
+ */
+static void dove_mpp_nand_set(u16 config)
+{
+ u32 reg = readl(MPP_GENERAL_CTRL);
+ u8 n;
+ int gpio;
+
+ reg &= ~MPPG_NAND_GPIO_SEL;
+ if (config == MPP_NAND_GPO)
+ reg |= MPPG_NAND_GPIO_SEL;
+ writel(reg, MPP_GENERAL_CTRL);
+
+ /* configure gpio capabilities */
+ gpio = (config == MPP_NAND_GPO) ? GPIO_OUTPUT_OK : 0;
+ for (n = MPP_NAND; n <= MPP_NAND_MAX; n++)
+ orion_gpio_set_valid(n, gpio);
+}
+
+/*
+ * Dedicated audio1 pins can carry i2s, spdif, ssp or twsi
+ * and gpio in various combinations
+ */
+#define AUDIO1_TWSI (1 << 0)
+#define AUDIO1_SPDIFO (1 << 1)
+#define AUDIO1_SSP (1 << 2)
+#define AUDIO1_GPIO (1 << 3)
+
+static void dove_mpp_audio1_set(u16 config)
+{
+ u32 mpp4 = readl(MPP4_CTRL);
+ u32 sspc1 = readl(SSP_CONFIG_STATUS_1);
+ u32 gmpp = readl(MPP_GENERAL_CTRL);
+ u32 gcfg2 = readl(GENERAL_CONFIG_2);
+ u8 n, sel = MPP_SEL(config);
+ int gpio;
+
+ gcfg2 &= ~GENERAL_TWSI_OPTION3_SEL;
+ gmpp &= ~MPPG_AUDIO1_SPDIFO_GPIO_SEL;
+ sspc1 &= ~SSP_SSP_ON_AUDIO1;
+ mpp4 &= ~MPP4_AUDIO1_GPIO_SEL;
+ if (sel & AUDIO1_TWSI)
+ gcfg2 |= GENERAL_TWSI_OPTION3_SEL;
+ if (sel & AUDIO1_SPDIFO)
+ gmpp |= MPPG_AUDIO1_SPDIFO_GPIO_SEL;
+ if (sel & AUDIO1_SSP)
+ sspc1 |= SSP_SSP_ON_AUDIO1;
+ if (sel & AUDIO1_GPIO)
+ mpp4 |= MPP4_AUDIO1_GPIO_SEL;
+
+ writel(mpp4, MPP4_CTRL);
+ writel(sspc1, SSP_CONFIG_STATUS_1);
+ writel(gmpp, MPP_GENERAL_CTRL);
+ writel(gcfg2, GENERAL_CONFIG_2);
+
+ /* configure gpio capabilities */
+ /* gpio allows gpio on all audio1 mpp pins */
+ gpio = 0;
+ if (config == MPP_AUDIO1_GPIO)
+ gpio = GPIO_INPUT_OK | GPIO_OUTPUT_OK;
+
+ for (n = MPP_AUDIO1; n <= MPP_AUDIO1_MAX; n++)
+ orion_gpio_set_valid(n, gpio);
+
+ switch (config) {
+ /* spdifo and twsi allow gpio on mpp[52:55] */
+ case MPP_AUDIO1_SPDIFO:
+ case MPP_AUDIO1_TWSI:
+ orion_gpio_set_valid(52, GPIO_INPUT_OK | GPIO_OUTPUT_OK);
+ orion_gpio_set_valid(53, GPIO_INPUT_OK | GPIO_OUTPUT_OK);
+ orion_gpio_set_valid(54, GPIO_INPUT_OK | GPIO_OUTPUT_OK);
+ orion_gpio_set_valid(55, GPIO_INPUT_OK | GPIO_OUTPUT_OK);
+ break;
+ /* i2s and ssp allow gpio on mpp[56:57] */
+ case MPP_AUDIO1_I2S:
+ case MPP_AUDIO1_SSP:
+ orion_gpio_set_valid(56, GPIO_INPUT_OK | GPIO_OUTPUT_OK);
+ orion_gpio_set_valid(57, GPIO_INPUT_OK | GPIO_OUTPUT_OK);
+ break;
+ }
+}
+
+/*
+ * MPP PMU switches audio0 pins to ac97 or i2s0
+ */
+static void dove_mpp_audio0_set(u16 config)
+{
+ /* switch i2s or ac97 to audio0 */
+ u32 reg = readl(MPP_PMU_GENERAL_CTRL);
+
+ reg &= ~PMUG_AUDIO0_AC97_SEL;
+ if (config == MPP_AUDIO0_AC97)
+ reg |= PMUG_AUDIO0_AC97_SEL;
+ writel(reg, MPP_PMU_GENERAL_CTRL);
+}
+
+/*
+ * TWSI has 3 optional pin sets that can be switched during runtime
+ */
+static void dove_mpp_twsi_set(u16 config)
+{
+ u32 gcfg1 = readl(GENERAL_CONFIG_1);
+ u32 gcfg2 = readl(GENERAL_CONFIG_2);
+
+ gcfg1 &= ~GENERAL_TWSI_MUXEN_OPTION1;
+ gcfg2 &= ~(GENERAL_TWSI_MUXEN_OPTION2 | GENERAL_TWSI_MUXEN_OPTION3);
+
+ switch (config) {
+ case MPP_TWSI_OPTION1:
+ gcfg1 |= GENERAL_TWSI_MUXEN_OPTION1;
+ break;
+ case MPP_TWSI_OPTION2:
+ gcfg2 |= GENERAL_TWSI_MUXEN_OPTION2;
+ break;
+ case MPP_TWSI_OPTION3:
+ gcfg2 |= GENERAL_TWSI_MUXEN_OPTION3;
+ break;
+ }
+
+ writel(gcfg1, GENERAL_CONFIG_1);
+ writel(gcfg2, GENERAL_CONFIG_2);
+}
+
+void dove_mpp_conf(u16 *mpp_list)
+{
+ while (*mpp_list) {
+ u8 num = MPP_NUM(*mpp_list);
+
+ if (num <= MPP_PMU_MAX)
+ dove_mpp_pmu_set(*mpp_list);
+ else if (num <= MPP_STD_MAX)
+ dove_mpp_std_set(*mpp_list);
+ else {
+ switch (num) {
+ case MPP_CAMERA:
+ case MPP_SDIO0:
+ case MPP_SDIO1:
+ case MPP_SPI:
+ case MPP_UART1:
+ dove_mpp4_set(*mpp_list);
+ break;
+ case MPP_NAND:
+ dove_mpp_nand_set(*mpp_list);
+ break;
+ case MPP_AUDIO0:
+ dove_mpp_audio0_set(*mpp_list);
+ break;
+ case MPP_AUDIO1:
+ dove_mpp_audio1_set(*mpp_list);
+ break;
+ case MPP_TWSI:
+ dove_mpp_twsi_set(*mpp_list);
+ break;
+ }
+ }
+ mpp_list++;
+ }
+}
diff --git a/arch/arm/cpu/armv7/dove/timer.c b/arch/arm/cpu/armv7/dove/timer.c
new file mode 100644
index 0000000..3be9b78
--- /dev/null
+++ b/arch/arm/cpu/armv7/dove/timer.c
@@ -0,0 +1,176 @@
+/*
+ * Marvell Dove SoC timer
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/dove.h>
+
+#define UBOOT_CNTR 0 /* counter to use for uboot timer */
+
+/* Timer reload and current value registers */
+struct dovetmr_val {
+ u32 reload; /* Timer reload reg */
+ u32 val; /* Timer value reg */
+};
+
+/* Timer registers */
+struct dovetmr_registers {
+ u32 ctrl; /* Timer control reg */
+ u32 pad[3];
+ struct dovetmr_val tmr[2];
+ u32 wdt_reload;
+ u32 wdt_val;
+};
+
+struct dovetmr_registers *dovetmr_regs =
+ (struct dovetmr_registers *)DOVE_TIMER_BASE;
+
+/*
+ * ARM Timers Registers Map
+ */
+#define CNTMR_CTRL_REG &dovetmr_regs->ctrl
+#define CNTMR_RELOAD_REG(tmrnum) &dovetmr_regs->tmr[tmrnum].reload
+#define CNTMR_VAL_REG(tmrnum) &dovetmr_regs->tmr[tmrnum].val
+
+/*
+ * ARM Timers Control Register
+ * CPU_TIMERS_CTRL_REG (CTCR)
+ */
+#define CTCR_ARM_TIMER_EN_OFFS(cntr) (cntr * 2)
+#define CTCR_ARM_TIMER_EN_MASK(cntr) (1 << CTCR_ARM_TIMER_EN_OFFS)
+#define CTCR_ARM_TIMER_EN(cntr) (1 << CTCR_ARM_TIMER_EN_OFFS(cntr))
+#define CTCR_ARM_TIMER_DIS(cntr) (0 << CTCR_ARM_TIMER_EN_OFFS(cntr))
+
+#define CTCR_ARM_TIMER_AUTO_OFFS(cntr) ((cntr * 2) + 1)
+#define CTCR_ARM_TIMER_AUTO_MASK(cntr) (1 << 1)
+#define CTCR_ARM_TIMER_AUTO_EN(cntr) (1 << CTCR_ARM_TIMER_AUTO_OFFS(cntr))
+#define CTCR_ARM_TIMER_AUTO_DIS(cntr) (0 << CTCR_ARM_TIMER_AUTO_OFFS(cntr))
+
+/*
+ * ARM Timer\Watchdog Reload Register
+ * CNTMR_RELOAD_REG (TRR)
+ */
+#define TRG_ARM_TIMER_REL_OFFS 0
+#define TRG_ARM_TIMER_REL_MASK 0xffffffff
+
+/*
+ * ARM Timer\Watchdog Register
+ * CNTMR_VAL_REG (TVRG)
+ */
+#define TVR_ARM_TIMER_OFFS 0
+#define TVR_ARM_TIMER_MASK 0xffffffff
+#define TVR_ARM_TIMER_MAX 0xffffffff
+#define TIMER_LOAD_VAL 0xffffffff
+
+#define READ_TIMER (readl(CNTMR_VAL_REG(UBOOT_CNTR)) / \
+ (CONFIG_SYS_TCLK / 1000))
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define timestamp gd->tbl
+#define lastdec gd->lastinc
+
+ulong get_timer_masked(void)
+{
+ ulong now = READ_TIMER;
+
+ if (lastdec >= now) {
+ /* normal mode */
+ timestamp += lastdec - now;
+ } else {
+ /* we have an overflow ... */
+ timestamp += lastdec +
+ (TIMER_LOAD_VAL / (CONFIG_SYS_TCLK / 1000)) - now;
+ }
+ lastdec = now;
+
+ return timestamp;
+}
+
+ulong get_timer(ulong base)
+{
+ return get_timer_masked() - base;
+}
+
+void __udelay(unsigned long usec)
+{
+ uint current;
+ ulong delayticks;
+
+ current = readl(CNTMR_VAL_REG(UBOOT_CNTR));
+ delayticks = (usec * (CONFIG_SYS_TCLK / 1000000));
+
+ if (current < delayticks) {
+ delayticks -= current;
+ do {} while (readl(CNTMR_VAL_REG(UBOOT_CNTR)) < current);
+ do {} while ((TIMER_LOAD_VAL - delayticks) <
+ readl(CNTMR_VAL_REG(UBOOT_CNTR)));
+ } else {
+ do {} while (readl(CNTMR_VAL_REG(UBOOT_CNTR)) >
+ (current - delayticks));
+ }
+}
+
+/*
+ * init the counter
+ */
+int timer_init(void)
+{
+ unsigned int cntmrctrl;
+
+ /* load value into timer */
+ writel(TIMER_LOAD_VAL, CNTMR_RELOAD_REG(UBOOT_CNTR));
+ writel(TIMER_LOAD_VAL, CNTMR_VAL_REG(UBOOT_CNTR));
+
+ /* enable timer in auto reload mode */
+ cntmrctrl = readl(CNTMR_CTRL_REG);
+ cntmrctrl |= CTCR_ARM_TIMER_EN(UBOOT_CNTR);
+ cntmrctrl |= CTCR_ARM_TIMER_AUTO_EN(UBOOT_CNTR);
+ writel(cntmrctrl, CNTMR_CTRL_REG);
+
+ /* init the timestamp and lastdec value */
+ lastdec = READ_TIMER;
+ timestamp = 0;
+
+ return 0;
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+ return (ulong)CONFIG_SYS_HZ;
+}
diff --git a/arch/arm/cpu/armv7/dove/usb.c b/arch/arm/cpu/armv7/dove/usb.c
new file mode 100644
index 0000000..1b932db
--- /dev/null
+++ b/arch/arm/cpu/armv7/dove/usb.c
@@ -0,0 +1,101 @@
+/*
+ * Marvell Dove SoC USB PHY init
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/dove.h>
+
+/* Dove USB2.0 PHY registers */
+#define USB20_POWER_CTRL ((base) + 0x400)
+#define USB20_PHY_PLL_CTRL ((base) + 0x410)
+#define PHY_PLL_VCO_RECALIBRATE (1 << 21)
+#define USB20_PHY_TX_CTRL ((base) + 0x420)
+#define PHY_TX_HS_STRESS_CTRL (1 << 31)
+#define PHY_TX_BLOCK_EN (1 << 21)
+#define PHY_TX_IMP_CAL_VTH(x) (x << 14)
+#define PHY_TX_IMP_CAL_VTH_MASK PHY_TX_IMP_CAL_VTH(0x7)
+#define PHY_TX_RCAL_START (1 << 12)
+#define PHY_TX_LOWVDD_EN (1 << 11)
+#define USB20_PHY_RX_CTRL ((base) + 0x430)
+#define PHY_RX_EDGE_DET(x) (x << 26)
+#define PHY_RX_EDGE_DET_MASK PHY_RX_EDGE_DET(0x3)
+#define PHY_RX_CDR_FASTLOCK_EN (1 << 21)
+#define PHY_RX_SQ_LENGTH(x) (x << 15)
+#define PHY_RX_SQ_LENGTH_MASK PHY_RX_SQ_LENGTH(0x3)
+#define PHY_RX_SQ_THRESH(x) (x << 4)
+#define PHY_RX_SQ_THRESH_MASK PHY_RX_SQ_THRESH(0xf)
+#define PHY_RX_LPF_COEFF(x) (x << 2)
+#define PHY_RX_LPF_COEFF_MASK PHY_RX_LPF_COEFF(0x3)
+#define USB20_PHY_IVREF_CTRL ((base) + 0x440)
+#define PHY_IVREF_TXVDD12(x) (x << 8)
+#define PHY_IVREF_TXVDD12_MASK PHY_IVREF_TXVDD12(0x3)
+#define USB20_PHY_TESTGRP_CTRL ((base) + 0x450)
+#define PHY_TESTGRP_SQ_RST (1 << 15)
+
+void dove_ehci_phy_init(int port)
+{
+ u32 base = (port == 0) ? DOVE_USB20_0_BASE : DOVE_USB20_1_BASE;
+ u32 reg;
+
+ /* USB PHY PLL control */
+ reg = readl(USB20_PHY_PLL_CTRL);
+ writel(reg | PHY_PLL_VCO_RECALIBRATE, USB20_PHY_PLL_CTRL);
+ udelay(100);
+ writel(reg & ~PHY_PLL_VCO_RECALIBRATE, USB20_PHY_PLL_CTRL);
+
+ /* USB PHY Tx control */
+ reg = readl(USB20_PHY_TX_CTRL);
+ reg &= ~PHY_TX_IMP_CAL_VTH_MASK;
+ reg |= PHY_TX_IMP_CAL_VTH(0x5);
+ reg |= PHY_TX_LOWVDD_EN;
+ reg |= PHY_TX_RCAL_START;
+ reg |= PHY_TX_BLOCK_EN;
+ reg |= PHY_TX_HS_STRESS_CTRL;
+ writel(reg, USB20_PHY_TX_CTRL);
+ udelay(100);
+ writel(reg & ~PHY_TX_RCAL_START, USB20_PHY_TX_CTRL);
+
+ /* USB PHY RX control */
+ reg = readl(USB20_PHY_RX_CTRL);
+ reg &= ~(PHY_RX_LPF_COEFF_MASK | PHY_RX_SQ_THRESH_MASK |
+ PHY_RX_SQ_LENGTH_MASK | PHY_RX_EDGE_DET_MASK);
+ reg |= PHY_RX_LPF_COEFF(0x1);
+ reg |= PHY_RX_SQ_THRESH(0xc);
+ reg |= PHY_RX_SQ_LENGTH(0x1);
+ reg |= PHY_RX_EDGE_DET(0x0);
+ reg &= ~PHY_RX_CDR_FASTLOCK_EN;
+ writel(reg, USB20_PHY_RX_CTRL);
+
+ /* USB PHY IVREF control */
+ reg = readl(USB20_PHY_IVREF_CTRL);
+ reg &= ~PHY_IVREF_TXVDD12_MASK;
+ reg |= PHY_IVREF_TXVDD12(0x3);
+ writel(reg, USB20_PHY_IVREF_CTRL);
+
+ /* USB PHY TEST GROUP control */
+ reg = readl(USB20_PHY_TESTGRP_CTRL);
+ reg &= ~PHY_TESTGRP_SQ_RST;
+ writel(reg, USB20_PHY_TESTGRP_CTRL);
+}
diff --git a/arch/arm/include/asm/arch-dove/config.h b/arch/arm/include/asm/arch-dove/config.h
new file mode 100644
index 0000000..2d94a48
--- /dev/null
+++ b/arch/arm/include/asm/arch-dove/config.h
@@ -0,0 +1,153 @@
+/*
+ * Marvell SoC config
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _DOVE_CONFIG_H
+#define _DOVE_CONFIG_H
+
+#include <asm/arch/dove.h>
+
+#define CONFIG_ARMV7 /* Basic Architecture */
+#define CONFIG_DOVE /* SOC Family Name */
+#define CONFIG_SHEEVA_88SV581 /* CPU Core subversion */
+#define CONFIG_SYS_CACHELINE_SIZE 32
+ /* default Dcache Line length for Dove */
+#define CONFIG_SYS_ARM_CACHE_WRITETHROUGH
+#define CONFIG_SYS_DCACHE_OFF /* Disable DCache by default */
+
+/*
+ * By default kwbimage.cfg from board specific folder is used
+ * If for some board, different configuration file need to be used,
+ * CONFIG_SYS_KWD_CONFIG should be defined in board specific header file
+ */
+#ifndef CONFIG_SYS_KWD_CONFIG
+#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage.cfg
+#endif /* CONFIG_SYS_KWD_CONFIG */
+
+/* Dove has 2k of Security SRAM, use it for SP */
+#define CONFIG_SYS_INIT_SP_ADDR 0xC8012000
+#define CONFIG_NR_DRAM_BANKS_MAX 2
+
+#define CONFIG_I2C_MVTWSI_BASE DOVE_TWSI_BASE
+#define MV_UART_CONSOLE_BASE DOVE_UART0_BASE
+#define MV_SATA_BASE DOVE_SATA_BASE
+#define MV_SATA_PORT0_OFFSET DOVE_SATA_PORT0_OFFSET
+
+/*
+ * NAND configuration
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_KIRKWOOD 1
+#define CONFIG_SYS_NAND_BASE 0xD8000000 /* MV_DEFADR_NANDF */
+#define NAND_ALLOW_ERASE_ALL 1
+#endif
+
+/*
+ * SPI Flash configuration
+ */
+#ifdef CONFIG_CMD_SF
+#define CONFIG_HARD_SPI 1
+#define CONFIG_ORION_SPI 1
+#define ORION_SPI_BASE DOVE_SPI_BASE
+#ifndef CONFIG_ENV_SPI_BUS
+# define CONFIG_ENV_SPI_BUS 0
+#endif
+#ifndef CONFIG_ENV_SPI_CS
+# define CONFIG_ENV_SPI_CS 0
+#endif
+#ifndef CONFIG_ENV_SPI_MAX_HZ
+# define CONFIG_ENV_SPI_MAX_HZ 25000000
+#endif
+#endif
+
+/*
+ * Ethernet Driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_NETCONSOLE /* include NetConsole support */
+#define CONFIG_PHYLIB
+#define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */
+#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
+#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
+#endif /* CONFIG_CMD_NET */
+
+/*
+ * SDHCI
+ */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_MMC_SDMA
+#define CONFIG_SDHCI
+#define CONFIG_DOVE_SDHCI /* Enable Dove SDHCI controller driver */
+#define CONFIG_MMC_SDHCI_IO_ACCESSORS
+#define CONFIG_SYS_MMC_MAX_DEVICE 2
+#endif
+
+/*
+ * USB/EHCI
+ */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI_MARVELL
+#define CONFIG_EHCI_IS_TDI
+#endif /* CONFIG_CMD_USB */
+
+/*
+ * IDE Support on SATA ports
+ */
+#ifdef CONFIG_CMD_IDE
+#define __io
+#define CONFIG_CMD_EXT2
+#define CONFIG_MVSATA_IDE
+#define CONFIG_IDE_PREINIT
+#define CONFIG_MVSATA_IDE_USE_PORT1
+/* Needs byte-swapping for ATA data register */
+#define CONFIG_IDE_SWAP_IO
+/* Data, registers and alternate blocks are at the same offset */
+#define CONFIG_SYS_ATA_DATA_OFFSET (0x0100)
+#define CONFIG_SYS_ATA_REG_OFFSET (0x0100)
+#define CONFIG_SYS_ATA_ALT_OFFSET (0x0100)
+/* Each 8-bit ATA register is aligned to a 4-bytes address */
+#define CONFIG_SYS_ATA_STRIDE 4
+/* Controller supports 48-bits LBA addressing */
+#define CONFIG_LBA48
+/* CONFIG_CMD_IDE requires some #defines for ATA registers */
+#define CONFIG_SYS_IDE_MAXBUS 2
+#define CONFIG_SYS_IDE_MAXDEVICE 2
+/* ATA registers base is at SATA controller base */
+#define CONFIG_SYS_ATA_BASE_ADDR MV_SATA_BASE
+#endif /* CONFIG_CMD_IDE */
+
+/*
+ * I2C related stuff
+ */
+#ifdef CONFIG_CMD_I2C
+#ifndef CONFIG_SOFT_I2C
+#define CONFIG_I2C_MVTWSI
+#endif
+#define CONFIG_SYS_I2C_SLAVE 0x0
+#define CONFIG_SYS_I2C_SPEED 100000
+#endif
+
+#endif /* _DOVE_CONFIG_H */
diff --git a/arch/arm/include/asm/arch-dove/cpu.h b/arch/arm/include/asm/arch-dove/cpu.h
new file mode 100644
index 0000000..718dd59
--- /dev/null
+++ b/arch/arm/include/asm/arch-dove/cpu.h
@@ -0,0 +1,204 @@
+/*
+ * Marvell Dove SoC CPU
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _DOVECPU_H
+#define _DOVECPU_H
+
+#include <asm/system.h>
+
+#ifndef __ASSEMBLY__
+
+#define DOVECPU_WIN_CTRL_DATA(size, target, attr, en) (en | (target << 4) \
+ | (attr << 8) | (dove_winctrl_calcsize(size) << 16))
+
+#define DOVEGBE_PORT_SERIAL_CONTROL1_REG (DOVE_EGIGA_BASE + 0x44c)
+#define DOVE_REG_PCIE_DEVID (DOVE_REG_PCIE0_BASE + 0x00)
+#define DOVE_REG_PCIE_REVID (DOVE_REG_PCIE0_BASE + 0x08)
+#define DOVE_REG_SYSRST_CNT (DOVE_MPP_BASE + 0x50)
+#define SYSRST_CNT_1SEC_VAL (25*1000000)
+#define DOVE_REG_MPP_OUT_DRV_REG (DOVE_MPP_BASE + 0xE0)
+
+enum memory_bank {
+ BANK0,
+ BANK1,
+};
+
+enum dovecpu_winen {
+ DOVECPU_WIN_DISABLE,
+ DOVECPU_WIN_ENABLE
+};
+
+enum dovecpu_target {
+ DOVECPU_TARGET_DRAM = 0x0,
+ DOVECPU_TARGET_SASRAM = 0x3,
+ DOVECPU_TARGET_NAND = 0xc,
+ DOVECPU_TARGET_PMURAM = 0xd,
+ DOVECPU_TARGET_PCIE0 = 0x4,
+ DOVECPU_TARGET_PCIE1 = 0x8,
+ DOVECPU_TARGET_SPI = 0x1,
+ DOVECPU_TARGET_BOOTROM = 0x1,
+};
+
+enum dovecpu_attrib {
+ DOVECPU_ATTR_DRAM = 0x00,
+ DOVECPU_ATTR_SASRAM = 0x00,
+ DOVECPU_ATTR_NAND = 0x00,
+ DOVECPU_ATTR_PMURAM = 0x00,
+ DOVECPU_ATTR_PCIE_IO = 0xe0,
+ DOVECPU_ATTR_PCIE_MEM = 0xe8,
+ DOVECPU_ATTR_SPI0 = 0xfe,
+ DOVECPU_ATTR_SPI1 = 0xfb,
+ DOVECPU_ATTR_BOOTROM = 0xfd,
+};
+
+enum dovecpu_part {
+ DOVECPU_PART_SHEEVA = 0x581,
+};
+
+enum dovesoc_devid {
+ DOVESOC_DEVID_F6781 = 0x6781,
+ DOVESOC_DEVID_AP510 = 0x0510,
+};
+
+enum dovesoc_revid {
+ DOVESOC_REVID_Z0 = 0,
+ DOVESOC_REVID_Z1 = 1,
+ DOVESOC_REVID_Y0 = 2,
+ DOVESOC_REVID_Y1 = 3,
+ DOVESOC_REVID_X0 = 4,
+ DOVESOC_REVID_A0 = 6,
+ DOVESOC_REVID_A1 = 7,
+};
+
+/*
+ * Default Device Address MAP BAR values
+ */
+#define DOVE_DEFADR_PCIE0_MEM 0xe0000000
+#define DOVE_DEFADR_PCIE0_IO 0xf2000000
+#define DOVE_DEFADR_PCIE0_IO_REMAP 0x00000000
+#define DOVE_DEFADR_PCIE1_MEM 0xe8000000
+#define DOVE_DEFADR_PCIE1_IO 0xf2100000
+#define DOVE_DEFADR_PCIE1_IO_REMAP 0x00100000
+#define DOVE_DEFADR_SASRAM 0xc8000000
+#define DOVE_DEFADR_BOOTROM 0xf8000000
+#define DOVE_DEFADR_PMURAM 0xf0000000
+
+/*
+ * ARM CPUID register
+ */
+#define ARM_ID_REVISION_OFFSET 0
+#define ARM_ID_REVISION_MASK 0xf
+#define ARM_ID_PARTNUM_OFFSET 4
+#define ARM_ID_PARTNUM_MASK 0xfff
+#define ARM_ID_ARCH_OFFSET 16
+#define ARM_ID_ARCH_MASK 0xf
+#define ARM_ID_VAR_OFFSET 20
+#define ARM_ID_VAR_MASK 0xf
+#define ARM_ID_ASCII_OFFSET 24
+#define ARM_ID_ASCII_MASK 0xff
+
+/*
+ * read feroceon/sheeva core extra feature register
+ * using co-proc instruction
+ */
+static inline unsigned int readfr_extra_feature_reg(void)
+{
+ unsigned int val;
+ asm volatile ("mrc p15, 1, %0, c15, c1, 0 @ readfr exfr" : "=r"
+ (val) : : "cc");
+ return val;
+}
+
+/*
+ * write feroceon/sheeva core extra feature register
+ * using co-proc instruction
+ */
+static inline void writefr_extra_feature_reg(unsigned int val)
+{
+ asm volatile ("mcr p15, 1, %0, c15, c1, 0 @ writefr exfr" : : "r"
+ (val) : "cc");
+ isb();
+}
+
+/*
+ * Downstream Bridge Registers
+ */
+struct dovewin_registers {
+ u32 ctrl;
+ u32 base;
+ u32 remap_lo;
+ u32 remap_hi;
+};
+
+/*
+ * CPU control and status Registers
+ */
+struct dovecpu_registers {
+ u32 config; /* 0x20100 */
+ u32 ctrl_stat; /* 0x20104 */
+ u32 rstoutn_mask; /* 0x20108 */
+ u32 sys_soft_rst; /* 0x2010C */
+ u32 bridge_cause_irq; /* 0x20110 */
+ u32 bridge_mask_irq; /* 0x20114 */
+ u32 pad1;
+ u32 pmu_ctrl; /* 0x2011c */
+};
+
+/*
+ * GPIO 0/1 Registers
+ * GPIO 2 Registers (no datain/irq)
+ */
+struct dovegpio_registers {
+ u32 dout;
+ u32 oe;
+ u32 blink_en;
+ u32 din_pol;
+ u32 din;
+ u32 irq_cause;
+ u32 irq_mask;
+ u32 irq_level;
+};
+
+struct dove_gpio_init {
+ u32 val0;
+ u32 val1;
+ u32 val2;
+ u32 oe0_n;
+ u32 oe1_n;
+ u32 oe2_n;
+};
+
+/*
+ * functions
+ */
+void reset_cpu(unsigned long ignored);
+unsigned char get_random_hex(void);
+u32 dove_dram_start(enum memory_bank bank);
+u32 dove_dram_size(enum memory_bank bank);
+int dove_config_adr_windows(void);
+void dove_init_gpio(struct dove_gpio_init *);
+unsigned int dove_winctrl_calcsize(unsigned int sizeval);
+
+#endif /* __ASSEMBLY__ */
+#endif /* _DOVECPU_H */
diff --git a/arch/arm/include/asm/arch-dove/dove.h b/arch/arm/include/asm/arch-dove/dove.h
new file mode 100644
index 0000000..da5011b
--- /dev/null
+++ b/arch/arm/include/asm/arch-dove/dove.h
@@ -0,0 +1,93 @@
+/*
+ * Marvell Dove SoC register offsets and config
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _DOVE_H
+#define _DOVE_H
+
+/* Dove TCLK is fixed to 166MHz */
+#define CONFIG_SYS_TCLK 166666667
+
+/* SOC specific definitions */
+#define DOVE_PREMAP_REGS_PHYS_BASE 0xd0000000
+#define DOVE_PREMAP_INT_REGS_BASE_ADDR (DOVE_PREMAP_REGS_PHYS_BASE + 0x20080)
+#define DOVE_PREMAP_MC_DECODE_REG (DOVE_PREMAP_REGS_PHYS_BASE + 0x800010)
+
+#define DOVE_SB_REGS_PHYS_BASE 0xf1000000
+#define DOVE_NB_REGS_PHYS_BASE 0xf1800000
+#define DOVE_REGISTER(x) (DOVE_SB_REGS_PHYS_BASE + x)
+
+#define DOVE_AXI_CTRL_REG (DOVE_REGISTER(0xd0224))
+#define DOVE_CPU_CTRL_REG (DOVE_REGISTER(0xd025c))
+#define DOVE_MC_CTRL_REG (DOVE_REGISTER(0xd0260))
+#define DOVE_MC_DECODE_REG (DOVE_REGISTER(0x800010))
+
+#define DOVE_SPI_BASE (DOVE_REGISTER(0x10600))
+#define DOVE_TWSI_BASE (DOVE_REGISTER(0x11000))
+#define DOVE_UART0_BASE (DOVE_REGISTER(0x12000))
+#define DOVE_UART1_BASE (DOVE_REGISTER(0x12100))
+#define DOVE_UART2_BASE (DOVE_REGISTER(0x12200))
+#define DOVE_UART3_BASE (DOVE_REGISTER(0x12300))
+#define DOVE_CPU_WIN_BASE (DOVE_REGISTER(0x20000))
+#define DOVE_CPU_REG_BASE (DOVE_REGISTER(0x20100))
+#define DOVE_TIMER_BASE (DOVE_REGISTER(0x20300))
+#define DOVE_REG_PCIE0_BASE (DOVE_REGISTER(0x40000))
+#define DOVE_REG_PCIE1_BASE (DOVE_REGISTER(0x80000))
+#define DOVE_USB20_0_BASE (DOVE_REGISTER(0x50000))
+#define DOVE_USB20_1_BASE (DOVE_REGISTER(0x51000))
+#define DOVE_EGIGA_BASE (DOVE_REGISTER(0x72000))
+#define DOVE_SDIO1_BASE (DOVE_REGISTER(0x90000))
+#define DOVE_SDIO0_BASE (DOVE_REGISTER(0x92000))
+#define DOVE_CAMERA_BASE (DOVE_REGISTER(0x94000))
+#define DOVE_SATA_BASE (DOVE_REGISTER(0xa0000))
+#define DOVE_NANDF_BASE (DOVE_REGISTER(0xc0000))
+#define DOVE_PMU_BASE (DOVE_REGISTER(0xd0000))
+#define DOVE_MPP_BASE (DOVE_REGISTER(0xd0200))
+#define DOVE_GPIO0_BASE (DOVE_REGISTER(0xd0400))
+#define DOVE_GPIO1_BASE (DOVE_REGISTER(0xd0420))
+#define DOVE_RTC_BASE (DOVE_REGISTER(0xd8500))
+#define DOVE_AC97_BASE (DOVE_REGISTER(0xe0000))
+#define DOVE_PDMA_BASE (DOVE_REGISTER(0xe4000))
+#define DOVE_GPIO2_BASE (DOVE_REGISTER(0xe8400))
+#define DOVE_SSP_BASE (DOVE_REGISTER(0xec000))
+
+/* Dove Sata controller has one port */
+#define DOVE_SATA_PORT0_OFFSET 0x2000
+
+/* Dove GbE controller has one port */
+#define MAX_MVGBE_DEVS 1
+#define MVGBE0_BASE DOVE_EGIGA_BASE
+
+/* Dove USB Host controller */
+#define MVUSB0_BASE DOVE_USB20_0_BASE
+#define MVUSB0_CPU_ATTR_DRAM_CS0 DOVECPU_ATTR_DRAM
+#define MVUSB0_CPU_ATTR_DRAM_CS1 DOVECPU_ATTR_DRAM
+#define MVUSB0_CPU_ATTR_DRAM_CS2 DOVECPU_WIN_DISABLE
+#define MVUSB0_CPU_ATTR_DRAM_CS3 DOVECPU_WIN_DISABLE
+
+/* Dove CPU memory windows */
+#define MVCPU_WIN_CTRL_DATA DOVECPU_WIN_CTRL_DATA
+#define MVCPU_WIN_ENABLE DOVECPU_WIN_ENABLE
+#define MVCPU_WIN_DISABLE DOVECPU_WIN_DISABLE
+
+#endif
diff --git a/arch/arm/include/asm/arch-dove/gpio.h b/arch/arm/include/asm/arch-dove/gpio.h
new file mode 100644
index 0000000..71bef8e
--- /dev/null
+++ b/arch/arm/include/asm/arch-dove/gpio.h
@@ -0,0 +1,35 @@
+/*
+ * Marvell Dove SoC gpio
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef __DOVE_GPIO_H
+#define __DOVE_GPIO_H
+
+#include <orion_gpio.h>
+
+#define GPIO_MAX 70
+#define GPIO_BASE(pin) (((pin) >= 64) ? DOVE_GPIO2_BASE : \
+ ((pin) >= 32) ? DOVE_GPIO1_BASE : \
+ DOVE_GPIO0_BASE)
+
+#endif
diff --git a/arch/arm/include/asm/arch-dove/mpp.h b/arch/arm/include/asm/arch-dove/mpp.h
new file mode 100644
index 0000000..1279ac2
--- /dev/null
+++ b/arch/arm/include/asm/arch-dove/mpp.h
@@ -0,0 +1,283 @@
+/*
+ * Marvell Dove SoC pinmux
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _DOVE_MPP_H
+#define _DOVE_MPP_H
+
+#define DOVE_GPI (1 << 0)
+#define DOVE_GPO (1 << 1)
+#define DOVE_GPIO (DOVE_GPO | DOVE_GPI)
+
+#define MPP(_num, _sel, _gpio) ( \
+ /* MPP number */ ((_num) & 0xff) | \
+ /* MPP select value */ (((_sel) & 0x1f) << 8) | \
+ /* is gpio config */ ((!!(_gpio)) << 15))
+
+/* MPP0-15 allow PMU function */
+#define MPP_PMU_MAX 15
+#define PMU (0x10)
+/* MPP0-23 have standard mpp register layout */
+#define MPP_STD_MAX 23
+
+#define MPP0 0
+#define MPP0_GPIO MPP(0, 0x0, 1)
+#define MPP0_UART2_RTS MPP(0, 0x2, 0)
+#define MPP0_SDIO0_CD MPP(0, 0x3, 0)
+#define MPP0_LCD0_PWM MPP(0, 0xf, 0)
+#define MPP0_PMU MPP(0, PMU, 0)
+
+#define MPP1 1
+#define MPP1_GPIO MPP(1, 0x0, 1)
+#define MPP1_UART2_CTS MPP(1, 0x2, 0)
+#define MPP1_SDIO0_WP MPP(1, 0x3, 0)
+#define MPP1_LCD1_PWM MPP(1, 0xf, 0)
+#define MPP1_PMU MPP(1, PMU, 0)
+
+#define MPP2 2
+#define MPP2_GPIO MPP(2, 0x0, 1)
+#define MPP2_SATA_PRSNT MPP(2, 0x1, 0)
+#define MPP2_UART2_TXD MPP(2, 0x2, 0)
+#define MPP2_SDIO0_BUSPWR MPP(2, 0x3, 0)
+#define MPP2_UART1_RTS MPP(2, 0x4, 0)
+#define MPP2_PMU MPP(2, PMU, 0)
+
+#define MPP3 3
+#define MPP3_GPIO MPP(3, 0x0, 1)
+#define MPP3_SATA_ACT MPP(3, 0x1, 0)
+#define MPP3_UART2_RXD MPP(3, 0x2, 0)
+#define MPP3_SDIO0_LEDCTRL MPP(3, 0x3, 0)
+#define MPP3_UART1_CTS MPP(3, 0x4, 0)
+#define MPP3_LCD_SPI_CS1 MPP(3, 0xf, 0)
+#define MPP3_PMU MPP(3, PMU, 0)
+
+#define MPP4 4
+#define MPP4_GPIO MPP(4, 0x0, 1)
+#define MPP4_UART3_RTS MPP(4, 0x2, 0)
+#define MPP4_SDIO1_CD MPP(4, 0x3, 0)
+#define MPP4_SPI1_MISO MPP(4, 0x4, 0)
+#define MPP4_PMU MPP(4, PMU, 0)
+
+#define MPP5 5
+#define MPP5_GPIO MPP(5, 0x0, 1)
+#define MPP5_UART3_CTS MPP(5, 0x2, 0)
+#define MPP5_SDIO1_WP MPP(5, 0x3, 0)
+#define MPP5_SPI1_CS MPP(5, 0x4, 0)
+#define MPP5_PMU MPP(5, PMU, 0)
+
+#define MPP6 6
+#define MPP6_GPIO MPP(6, 0x0, 1)
+#define MPP6_UART3_TXD MPP(6, 0x2, 0)
+#define MPP6_SDIO1_BUSPWR MPP(6, 0x3, 0)
+#define MPP6_SPI1_MOSI MPP(6, 0x4, 0)
+#define MPP6_PMU MPP(6, PMU, 0)
+
+#define MPP7 7
+#define MPP7_GPIO MPP(7, 0x0, 1)
+#define MPP7_UART3_RXD MPP(7, 0x2, 0)
+#define MPP7_SDIO1_LEDCTRL MPP(7, 0x3, 0)
+#define MPP7_SPI1_SCK MPP(7, 0x4, 0)
+#define MPP7_PMU MPP(7, PMU, 0)
+
+#define MPP8 8
+#define MPP8_GPIO MPP(8, 0x0, 1)
+#define MPP8_WATCHDOG_RSTOUT MPP(8, 0x1, 0)
+#define MPP8_PMU MPP(8, PMU, 0)
+
+#define MPP9 9
+#define MPP9_GPIO MPP(9, 0x0, 1)
+#define MPP9_PEX1_CLKREQ MPP(9, 0x5, 0)
+#define MPP9_PMU MPP(9, PMU, 0)
+
+#define MPP10 10
+#define MPP10_GPIO MPP(10, 0x0, 1)
+#define MPP10_SSP_SCLK MPP(10, 0x5, 0)
+#define MPP10_PMU MPP(10, PMU, 0)
+
+#define MPP11 11
+#define MPP11_GPIO MPP(11, 0x0, 1)
+#define MPP11_SATA_PRSNT MPP(11, 0x1, 0)
+#define MPP11_SATA_ACT MPP(11, 0x2, 0)
+#define MPP11_SDIO0_LEDCTRL MPP(11, 0x3, 0)
+#define MPP11_SDIO1_LEDCTRL MPP(11, 0x4, 0)
+#define MPP11_PEX0_CLKREQ MPP(11, 0x5, 0)
+#define MPP11_PMU MPP(11, PMU, 0)
+
+#define MPP12 12
+#define MPP12_GPIO MPP(12, 0x0, 1)
+#define MPP12_SATA_ACT MPP(12, 0x1, 0)
+#define MPP12_UART2_RTS MPP(12, 0x2, 0)
+#define MPP12_AUDIO0_EXTCLK MPP(12, 0x3, 0)
+#define MPP12_SDIO1_CD MPP(12, 0x4, 0)
+#define MPP12_PMU MPP(12, PMU, 0)
+
+#define MPP13 13
+#define MPP13_GPIO MPP(13, 0x0, 1)
+#define MPP13_UART2_CTS MPP(13, 0x2, 0)
+#define MPP13_AUDIO1_EXTCLK MPP(13, 0x3, 0)
+#define MPP13_SDIO1_WP MPP(13, 0x4, 0)
+#define MPP13_SSP_EXTCLK MPP(13, 0x5, 0)
+#define MPP13_PMU MPP(13, PMU, 0)
+
+#define MPP14 14
+#define MPP14_GPIO MPP(14, 0x0, 1)
+#define MPP14_UART2_TXD MPP(14, 0x2, 0)
+#define MPP14_SDIO1_BUSPWR MPP(14, 0x4, 0)
+#define MPP14_SSP_TXD MPP(14, 0x5, 0)
+#define MPP14_PMU MPP(14, PMU, 0)
+
+#define MPP15 15
+#define MPP15_GPIO MPP(15, 0x0, 1)
+#define MPP15_UART2_RXD MPP(15, 0x2, 0)
+#define MPP15_SDIO1_LEDCTRL MPP(15, 0x4, 0)
+#define MPP15_SSP_SFRM MPP(15, 0x5, 0)
+#define MPP15_PMU MPP(15, PMU, 0)
+
+#define MPP16 16
+#define MPP16_GPIO MPP(16, 0x0, 1)
+#define MPP16_UART3_RTS MPP(16, 0x2, 0)
+#define MPP16_SDIO0_CD MPP(16, 0x3, 0)
+#define MPP16_LCD_SPI_CS1 MPP(16, 0x4, 0)
+#define MPP16_AC97_SDI1 MPP(16, 0x5, 0)
+
+#define MPP17 17
+#define MPP17_GPIO MPP(17, 0x0, 1)
+#define MPP17_AC97_SYSCLKO MPP(17, 0x1, 0)
+#define MPP17_UART3_CTS MPP(17, 0x2, 0)
+#define MPP17_SDIO0_WP MPP(17, 0x3, 0)
+#define MPP17_TWSI_SDA MPP(17, 0x4, 0)
+#define MPP17_AC97_SDI2 MPP(17, 0x5, 0)
+
+#define MPP18 18
+#define MPP18_GPIO MPP(18, 0x0, 1)
+#define MPP18_UART3_TXD MPP(18, 0x2, 0)
+#define MPP18_SDIO0_BUSPWR MPP(18, 0x3, 0)
+#define MPP18_LCD0_PWM MPP(18, 0x4, 0)
+#define MPP18_AC97_SDI3 MPP(18, 0x5, 0)
+
+#define MPP19 19
+#define MPP19_GPIO MPP(19, 0x0, 1)
+#define MPP19_UART3_RXD MPP(19, 0x2, 0)
+#define MPP19_SDIO0_LEDCTRL MPP(19, 0x3, 0)
+#define MPP19_TWSI_SCK MPP(19, 0x4, 0)
+
+#define MPP20 20
+#define MPP20_GPIO MPP(20, 0x0, 1)
+#define MPP20_AC97_SYSCLKO MPP(20, 0x1, 0)
+#define MPP20_LCD_SPI_MISO MPP(20, 0x2, 0)
+#define MPP20_SDIO1_CD MPP(20, 0x3, 0)
+#define MPP20_SDIO0_CD MPP(20, 0x5, 0)
+#define MPP20_SPI1_MISO MPP(20, 0x6, 0)
+
+#define MPP21 21
+#define MPP21_GPIO MPP(21, 0x0, 1)
+#define MPP21_UART1_RTS MPP(21, 0x1, 0)
+#define MPP21_LCD_SPI_CS0 MPP(21, 0x2, 0)
+#define MPP21_SDIO1_WP MPP(21, 0x3, 0)
+#define MPP21_SSP_SFRM MPP(21, 0x4, 0)
+#define MPP21_SDIO0_WP MPP(21, 0x5, 0)
+#define MPP21_SPI1_CS MPP(21, 0x6, 0)
+
+#define MPP22 22
+#define MPP22_GPIO MPP(22, 0x0, 1)
+#define MPP22_UART1_CTS MPP(22, 0x1, 0)
+#define MPP22_LCD_SPI_MOSI MPP(22, 0x2, 0)
+#define MPP22_SDIO1_BUSPWR MPP(22, 0x3, 0)
+#define MPP22_SSP_TXD MPP(22, 0x4, 0)
+#define MPP22_SDIO0_BUSPWR MPP(22, 0x5, 0)
+#define MPP22_SPI1_MOSI MPP(22, 0x6, 0)
+
+#define MPP23 23
+#define MPP23_GPIO MPP(23, 0x0, 1)
+#define MPP23_LCD_SPI_SCK MPP(23, 0x2, 0)
+#define MPP23_SDIO1_LEDCTRL MPP(23, 0x3, 0)
+#define MPP23_SSP_SCLK MPP(23, 0x4, 0)
+#define MPP23_SDIO0_LEDCTRL MPP(23, 0x5, 0)
+#define MPP23_SPI1_SCK MPP(23, 0x6, 0)
+
+/* MPP_CAMERA = MPP[24:39] */
+#define MPP_CAMERA 24
+#define MPP_CAMERA_CAMERA MPP(24, 0x0, 0)
+#define MPP_CAMERA_GPIO MPP(24, 0x1, 1)
+#define MPP_CAMERA_MAX 39
+
+/* MPP_SDIO0 = MPP[40:45] */
+#define MPP_SDIO0 40
+#define MPP_SDIO0_SDIO MPP(40, 0x0, 0)
+#define MPP_SDIO0_GPIO MPP(40, 0x1, 1)
+#define MPP_SDIO0_MAX 45
+
+/* MPP_SDIO1 = MPP[46:51] */
+#define MPP_SDIO1 46
+#define MPP_SDIO1_SDIO MPP(46, 0x0, 0)
+#define MPP_SDIO1_GPIO MPP(46, 0x1, 1)
+#define MPP_SDIO1_MAX 51
+
+/* MPP_AUDIO1 = MPP[52:57] */
+#define MPP_AUDIO1 52
+#define MPP_AUDIO1_I2S_SPDIFO MPP(52, 0x0, 0)
+#define MPP_AUDIO1_I2S MPP(52, 0x2, 0)
+#define MPP_AUDIO1_SPDIFO MPP(52, 0x8, 0)
+#define MPP_AUDIO1_GPIO MPP(52, 0xa, 1)
+#define MPP_AUDIO1_TWSI MPP(52, 0xb, 0)
+#define MPP_AUDIO1_SSP_SPDIFO MPP(52, 0xc, 0)
+#define MPP_AUDIO1_SSP MPP(52, 0xe, 0)
+#define MPP_AUDIO1_SSP_TWSI MPP(52, 0xf, 0)
+#define MPP_AUDIO1_MAX 57
+
+/* MPP_SPI = MPP[58:61] */
+#define MPP_SPI 58
+#define MPP_SPI_SPI MPP(58, 0x0, 0)
+#define MPP_SPI_GPIO MPP(58, 0x1, 1)
+#define MPP_SPI_MAX 61
+
+/* MPP_UART1 = MPP[62:63] */
+#define MPP_UART1 62
+#define MPP_UART1_UART1 MPP(62, 0x0, 0)
+#define MPP_UART1_GPIO MPP(62, 0x1, 1)
+#define MPP_UART1_MAX 63
+
+/* MPP_NAND = MPP[64:71] */
+#define MPP_NAND 64
+#define MPP_NAND_NAND MPP(64, 0x0, 0)
+#define MPP_NAND_GPO MPP(64, 0x1, 1)
+#define MPP_NAND_MAX 71
+
+/* MPP_AUDIO0 = Internal AC97/I2S mux for audio0 pins */
+#define MPP_AUDIO0 72
+#define MPP_AUDIO0_I2S MPP(72, 0x0, 0)
+#define MPP_AUDIO0_AC97 MPP(72, 0x1, 0)
+
+/* MPP_TWSI = Internal TWSI option mux */
+#define MPP_TWSI 73
+#define MPP_TWSI_NONE MPP(73, 0x0, 0)
+#define MPP_TWSI_OPTION1 MPP(73, 0x1, 0)
+#define MPP_TWSI_OPTION2 MPP(73, 0x2, 0)
+#define MPP_TWSI_OPTION3 MPP(73, 0x3, 0)
+
+#define MPP_MAX MPP_TWSI
+
+u8 dove_mpp_get_gpio_caps(u8 num);
+void dove_mpp_conf(u16 *mpp_list);
+
+#endif
--
1.7.10.4
More information about the U-Boot
mailing list