[U-Boot] [PATCH v3 4/4] SMDK55250: Enable SATA

[Vasanth Ananthan]

This patch adds required macros for enabling SATA.

Signed-off-by: Vasanth Ananthan <vasanth.a at samsung.com>
---
 include/configs/smdk5250.h |   15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h
index e412da8..67cdbe2 100644
--- a/include/configs/smdk5250.h
+++ b/include/configs/smdk5250.h
@@ -68,7 +68,7 @@
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (1 << 20))
 
 /* select serial console configuration */
-#define CONFIG_SERIAL3			/* use SERIAL 3 */
+#define CONFIG_SERIAL2			/* use SERIAL 2 */
 #define CONFIG_BAUDRATE			115200
 #define EXYNOS5_DEFAULT_UART_OFFSET	0x010000
 
@@ -97,6 +97,7 @@
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_NET
+#define CONFIG_CMD_SATA
 
 #define CONFIG_BOOTDELAY		3
 #define CONFIG_ZERO_BOOTDELAY_CHECK
@@ -192,8 +193,6 @@
 #define EXYNOS_COPY_SPI_FNPTR_ADDR	0x02020058
 #define SPI_FLASH_UBOOT_POS		(CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
 
-#define CONFIG_DOS_PARTITION
-
 #define CONFIG_IRAM_STACK	0x02050000
 
 #define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR - 0x1000000)
@@ -259,4 +258,14 @@
 /* Enable devicetree support */
 #define CONFIG_OF_LIBFDT
 
+/* Enable SATA */
+#ifdef CONFIG_CMD_SATA
+	#define CONFIG_DWC_AHSATA
+	#define CONFIG_SYS_SATA_MAX_DEVICE      1
+	#define CONFIG_DWC_AHSATA_PORT_ID       0
+	#define CONFIG_DWC_AHSATA_BASE_ADDR     EXYNOS5_SATA_BASE
+	#define CONFIG_LBA48
+	#define CONFIG_LIBATA
+#endif
+
 #endif	/* __CONFIG_H */
-- 
1.7.9.5