[U-Boot] [PATCH V3 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC
Amar
amarendra.xt at samsung.com
Mon Dec 31 11:58:15 CET 2012
This patch adds FDT support for DWMMC, by reading the DWMMC node data
from the device tree and initialising DWMMC channels as per data
obtained from the node.
Changes from V1:
1)Updated code to have same signature for the function
exynos_dwmci_init() for both FDT and non-FDT versions.
2)Updated code to pass device_id parameter to the function
exynos5_mmc_set_clk_div() instead of index.
3)Updated code to decode the value of "samsung,width" from FDT.
4)Channel index is computed instead of getting from FDT.
Changes from V2:
1)Updation of commit message and resubmition of proper patch set.
Signed-off-by: Vivek Gautam <gautam.vivek at samsung.com>
Signed-off-by: Amar <amarendra.xt at samsung.com>
---
arch/arm/include/asm/arch-exynos/dwmmc.h | 4 ++
drivers/mmc/exynos_dw_mmc.c | 116 +++++++++++++++++++++++++++++--
include/dwmmc.h | 4 ++
3 files changed, 117 insertions(+), 7 deletions(-)
diff --git a/arch/arm/include/asm/arch-exynos/dwmmc.h b/arch/arm/include/asm/arch-exynos/dwmmc.h
index 8acdf9b..40dcc7b 100644
--- a/arch/arm/include/asm/arch-exynos/dwmmc.h
+++ b/arch/arm/include/asm/arch-exynos/dwmmc.h
@@ -29,8 +29,12 @@
int exynos_dwmci_init(u32 regbase, int bus_width, int index);
+#ifdef CONFIG_OF_CONTROL
+unsigned int exynos_dwmmc_init(const void *blob);
+#else
static inline unsigned int exynos_dwmmc_init(int index, int bus_width)
{
unsigned int base = samsung_get_base_mmc() + (0x10000 * index);
return exynos_dwmci_init(base, bus_width, index);
}
+#endif
diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c
index 72a31b7..541889f 100644
--- a/drivers/mmc/exynos_dw_mmc.c
+++ b/drivers/mmc/exynos_dw_mmc.c
@@ -19,39 +19,141 @@
*/
#include <common.h>
-#include <malloc.h>
#include <dwmmc.h>
+#include <fdtdec.h>
+#include <libfdt.h>
+#include <malloc.h>
#include <asm/arch/dwmmc.h>
#include <asm/arch/clk.h>
+#include <asm/arch/pinmux.h>
+
+#define DWMMC_MAX_CH_NUM 4
+#define DWMMC_MAX_FREQ 52000000
+#define DWMMC_MIN_FREQ 400000
+#define DWMMC_MMC0_CLKSEL_VAL 0x03030001
+#define DWMMC_MMC2_CLKSEL_VAL 0x03020001
static char *EXYNOS_NAME = "EXYNOS DWMMC";
+u32 timing[3];
+/*
+ * Function used as callback function to initialise the
+ * CLKSEL register for every mmc channel.
+ */
static void exynos_dwmci_clksel(struct dwmci_host *host)
{
- u32 val;
- val = DWMCI_SET_SAMPLE_CLK(DWMCI_SHIFT_0) |
- DWMCI_SET_DRV_CLK(DWMCI_SHIFT_0) | DWMCI_SET_DIV_RATIO(0);
+ dwmci_writel(host, DWMCI_CLKSEL, host->clksel_val);
+}
- dwmci_writel(host, DWMCI_CLKSEL, val);
+unsigned int exynos_dwmci_get_clk(int dev_index)
+{
+ return get_mmc_clk(dev_index);
}
int exynos_dwmci_init(u32 regbase, int bus_width, int index)
{
struct dwmci_host *host = NULL;
+ int dev_id = 0;
host = malloc(sizeof(struct dwmci_host));
if (!host) {
printf("dwmci_host malloc fail!\n");
return 1;
}
+ /* Convert index into corresponding peripheral ID */
+ dev_id = index + PERIPH_ID_SDMMC0;
+
+ /* set the clock divisor - clk_div_fsys for mmc */
+ if (exynos5_mmc_set_clk_div(dev_id)) {
+ debug("mmc clock div set failed\n");
+ return -1;
+ }
host->name = EXYNOS_NAME;
host->ioaddr = (void *)regbase;
host->buswidth = bus_width;
+#ifdef CONFIG_OF_CONTROL
+ host->clksel_val = (DWMCI_SET_SAMPLE_CLK(timing[0]) |
+ DWMCI_SET_DRV_CLK(timing[1]) |
+ DWMCI_SET_DIV_RATIO(timing[2]));
+#else
+ if (0 == index)
+ host->clksel_val = DWMMC_MMC0_CLKSEL_VAL;
+ if (2 == index)
+ host->clksel_val = DWMMC_MMC2_CLKSEL_VAL;
+#endif
host->clksel = exynos_dwmci_clksel;
host->dev_index = index;
-
- add_dwmci(host, 52000000, 400000);
+ host->mmc_clk = exynos_dwmci_get_clk;
+ /* Add the mmc chennel to be registered with mmc core */
+ add_dwmci(host, DWMMC_MAX_FREQ, DWMMC_MIN_FREQ);
return 0;
}
+#ifdef CONFIG_OF_CONTROL
+unsigned int exynos_dwmmc_init(const void *blob)
+{
+ u32 base;
+ int index, bus_width;
+ int node_list[DWMMC_MAX_CH_NUM];
+ int err = 0;
+ int dev_id, flag;
+ int count, i;
+
+ count = fdtdec_find_aliases_for_id(blob, "dwmmc",
+ COMPAT_SAMSUNG_EXYNOS5_DWMMC, node_list,
+ DWMMC_MAX_CH_NUM);
+
+ for (i = 0; i < count; i++) {
+ int node = node_list[i];
+
+ if (node <= 0)
+ continue;
+
+ /* Extract device id for each mmc channel */
+ dev_id = pinmux_decode_periph_id(blob, node);
+
+ /* Get the bus width from the device node */
+ bus_width = fdtdec_get_int(blob, node, "samsung,bus-width", 0);
+ if (bus_width < 0) {
+ debug("DWMMC: Can't get bus-width\n");
+ return -1;
+ }
+ if (8 == bus_width)
+ flag = PINMUX_FLAG_8BIT_MODE;
+ else
+ flag = PINMUX_FLAG_NONE;
+
+ /* config pinmux for each mmc channel */
+ err = exynos_pinmux_config(dev_id, flag);
+ if (err) {
+ debug("DWMMC not configured\n");
+ return err;
+ }
+
+ index = dev_id - PERIPH_ID_SDMMC0;
+
+ /* Get the base address from the device node */
+ base = fdtdec_get_addr(blob, node, "reg");
+ if (!base) {
+ debug("DWMMC: Can't get base address\n");
+ return -1;
+ }
+ /* Extract the timing info from the node */
+ err = fdtdec_get_int_array(blob, node, "samsung,timing",
+ timing, 3);
+ if (err) {
+ debug("Can't get sdr-timings for divider\n");
+ return -1;
+ }
+ /* Initialise each mmc channel */
+ err = exynos_dwmci_init(base, bus_width, index);
+ if (err) {
+ debug("Can't do dwmci init\n");
+ return -1;
+ }
+ }
+
+ return 0;
+}
+#endif
diff --git a/include/dwmmc.h b/include/dwmmc.h
index c8b1d40..4a42849 100644
--- a/include/dwmmc.h
+++ b/include/dwmmc.h
@@ -123,6 +123,9 @@
#define MSIZE(x) ((x) << 28)
#define RX_WMARK(x) ((x) << 16)
#define TX_WMARK(x) (x)
+#define RX_WMARK_SHIFT 16
+#define RX_WMARK_MASK (0xfff << RX_WMARK_SHIFT)
+
#define DWMCI_IDMAC_OWN (1 << 31)
#define DWMCI_IDMAC_CH (1 << 4)
@@ -144,6 +147,7 @@ struct dwmci_host {
unsigned int bus_hz;
int dev_index;
int buswidth;
+ u32 clksel_val;
u32 fifoth_val;
struct mmc *mmc;
--
1.8.0
More information about the U-Boot
mailing list