[U-Boot] [PATCH V3 0/7] Add support for NVIDIA Tegra30 SoC

[Allen Martin]

On Tue, Dec 11, 2012 at 03:34:11PM -0800, Tom Warren wrote:
> This patch series adds basic (boot to cmd prompt) support for Tegra30.
> This is based on the Tegra20 SPL, which initializes the AVP (ARM7TDMI)
> boot proc) first, then control is transferred to the CPU (A9 quad cluster).
> It is based on current u-boot-tegra/next. Some Tegra20 files were

I wasn't able to get these to apply cleanly to u-boot-tegra/next.  It
failed on the first patch:

$ git am ~/twarren
Applying: Tegra30: Add arch-tegra30 include files
error: patch failed: arch/arm/include/asm/arch-tegra/clk_rst.h:37
error: arch/arm/include/asm/arch-tegra/clk_rst.h: patch does not apply
error: patch failed: arch/arm/include/asm/arch-tegra/clock.h:136
error: arch/arm/include/asm/arch-tegra/clock.h: patch does not apply
error: patch failed: arch/arm/include/asm/arch-tegra/tegra.h:72
error: arch/arm/include/asm/arch-tegra/tegra.h: patch does not apply
error: patch failed: arch/arm/include/asm/arch-tegra20/funcmux.h:62
error: arch/arm/include/asm/arch-tegra20/funcmux.h: patch does not apply
error: patch failed: arch/arm/include/asm/arch-tegra20/gp_padctrl.h:61
error: arch/arm/include/asm/arch-tegra20/gp_padctrl.h: patch does not apply
Patch failed at 0001 Tegra30: Add arch-tegra30 include files
When you have resolved this problem run "git am --resolved".
If you would prefer to skip this patch, instead run "git am --skip".
To restore the original branch and stop patching run "git am --abort".

-- 
nvpublic