[U-Boot] [PATCH V3 3/4] video: Modify exynos_fimd driver to support LCD console

Ajay Kumar ajaykumar.rs at samsung.com
Thu Dec 20 13:35:05 CET 2012


Currently, exynos FIMD driver is being used to support only TIZEN LOGOs.
In order to get LCD console, we need to enable half word swap feature
of FIMD and use 16 BPP.
LCD console and proprietary Logo cannot be used simultaneously.
You should define CONFIG_EXYNOS_LOGO for proprietary Logo, and if
CONFIG_EXYNOS_LOGO is not defined you get output console on LCD.
CONFIG_EXYNOS_LOGO is added to Trats configuration to keep
existing logo feature intact in Trats.

Signed-off-by: Ajay Kumar <ajaykumar.rs at samsung.com>
---
 drivers/video/exynos_fb.c   |    5 ++++-
 drivers/video/exynos_fimd.c |   10 ++++++++--
 include/configs/trats.h     |    1 +
 3 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/video/exynos_fb.c b/drivers/video/exynos_fb.c
index d9a3f9a..c111a09 100644
--- a/drivers/video/exynos_fb.c
+++ b/drivers/video/exynos_fb.c
@@ -65,6 +65,7 @@ static void exynos_lcd_init(vidinfo_t *vid)
 	exynos_fimd_lcd_init(vid);
 }
 
+#ifdef CONFIG_EXYNOS_LOGO
 static void draw_logo(void)
 {
 	int x, y;
@@ -87,6 +88,7 @@ static void draw_logo(void)
 	addr = panel_info.logo_addr;
 	bmp_display(addr, x, y);
 }
+#endif
 
 static void lcd_panel_on(vidinfo_t *vid)
 {
@@ -142,12 +144,13 @@ void lcd_ctrl_init(void *lcdbase)
 
 void lcd_enable(void)
 {
+#ifdef CONFIG_EXYNOS_LOGO
 	if (panel_info.logo_on) {
 		memset(lcd_base, 0, panel_width * panel_height *
 				(NBITS(panel_info.vl_bpix) >> 3));
 		draw_logo();
 	}
-
+#endif
 	lcd_panel_on(&panel_info);
 }
 
diff --git a/drivers/video/exynos_fimd.c b/drivers/video/exynos_fimd.c
index 06eae2e..f2e4c27 100644
--- a/drivers/video/exynos_fimd.c
+++ b/drivers/video/exynos_fimd.c
@@ -88,14 +88,20 @@ static void exynos_fimd_set_par(unsigned int win_id)
 	/* DATAPATH is DMA */
 	cfg |= EXYNOS_WINCON_DATAPATH_DMA;
 
-	/* bpp is 32 */
+#ifdef CONFIG_EXYNOS_LOGO /* To get proprietary LOGO */
 	cfg |= EXYNOS_WINCON_WSWP_ENABLE;
+#else	/* To get output console on LCD */
+	cfg |= EXYNOS_WINCON_HAWSWP_ENABLE;
+#endif
 
 	/* dma burst is 16 */
 	cfg |= EXYNOS_WINCON_BURSTLEN_16WORD;
 
-	/* pixel format is unpacked RGB888 */
+#ifdef CONFIG_EXYNOS_LOGO /* To get proprietary LOGO */
 	cfg |= EXYNOS_WINCON_BPPMODE_24BPP_888;
+#else	/* To get output console on LCD */
+	cfg |= EXYNOS_WINCON_BPPMODE_16BPP_565;
+#endif
 
 	writel(cfg, (unsigned int)&fimd_ctrl->wincon0 +
 			EXYNOS_WINCON(win_id));
diff --git a/include/configs/trats.h b/include/configs/trats.h
index a24e945..1573573 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -252,6 +252,7 @@
 #define CONFIG_EXYNOS_FB
 #define CONFIG_LCD
 #define CONFIG_CMD_BMP
+#define CONFIG_EXYNOS_LOGO
 #define CONFIG_BMP_32BPP
 #define CONFIG_FB_ADDR		0x52504000
 #define CONFIG_S6E8AX0
-- 
1.7.1



More information about the U-Boot mailing list