[U-Boot] [PATCH 03/11] usb: ehci: generic PCI support
Marek Vasut
marex at denx.de
Thu Dec 13 18:30:15 CET 2012
Dear Simon Glass,
> From: Vincent Palatin <vpalatin at chromium.org>
>
> Instead of hardcoding the PCI IDs on the USB controller, use the PCI
> class to detect them.
>
> Ensure the busmaster bit is properly set in the PCI configuration.
>
> Signed-off-by: Simon Glass <sjg at chromium.org>
> ---
> drivers/usb/host/ehci-pci.c | 37 +++++++++++++++++++++++++++++++++++++
> 1 files changed, 37 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
> index 29af02d..0dc0e6e 100644
> --- a/drivers/usb/host/ehci-pci.c
> +++ b/drivers/usb/host/ehci-pci.c
> @@ -32,6 +32,34 @@ static struct pci_device_id ehci_pci_ids[] = {
> {0x12D8, 0x400F}, /* Pericom */
> {0, 0}
> };
> +#else
> +static pci_dev_t ehci_find_class(void)
> +{
> + int bus;
> + int devnum;
> + pci_dev_t bdf;
> + uint32_t class;
> +
> + for (bus = 0; bus < pci_last_busno(); bus++) {
> + for (devnum = 0; devnum < PCI_MAX_PCI_DEVICES-1; devnum++) {
> + pci_read_config_dword(PCI_BDF(bus, devnum, 0),
> + PCI_CLASS_REVISION, &class);
> + if (class >> 16 == 0xffff)
> + continue;
> +
> + for (bdf = PCI_BDF(bus, devnum, 0);
> + bdf <= PCI_BDF(bus, devnum,
> + PCI_MAX_PCI_FUNCTIONS - 1);
> + bdf += PCI_BDF(0, 0, 1)) {
> + pci_read_config_dword(bdf, PCI_CLASS_REVISION,
> + &class);
> + if (class >> 8 == 0x0c0320)
Can we at least describe this magic please?
> + return bdf;
> + }
> + }
> + }
> + return -1;
Let's try to use errno.h please. It won't be consistent for a while, but we'll
get there.
> +}
> #endif
>
> /*
> @@ -41,8 +69,13 @@ static struct pci_device_id ehci_pci_ids[] = {
> int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor
> **hcor) {
> pci_dev_t pdev;
> + uint32_t cmd;
>
> +#ifdef CONFIG_PCI_EHCI_DEVICE
> pdev = pci_find_devices(ehci_pci_ids, CONFIG_PCI_EHCI_DEVICE);
> +#else
> + pdev = ehci_find_class();
> +#endif
> if (pdev == -1) {
> printf("EHCI host controller not found\n");
> return -1;
> @@ -57,6 +90,10 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr,
> struct ehci_hcor **hcor) (uint32_t)*hccr, (uint32_t)*hcor,
> (uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
>
> + /* enable busmaster */
> + pci_read_config_dword(pdev, PCI_COMMAND, &cmd);
> + cmd |= PCI_COMMAND_MASTER;
> + pci_write_config_dword(pdev, PCI_COMMAND, cmd);
> return 0;
> }
Best regards,
Marek Vasut
More information about the U-Boot
mailing list