[U-Boot] [PATCH] mx53loco: Call PMIC related functions from board_late_init()

[Stefano Babic]

On 27/12/2012 11:14, Fabio Estevam wrote:
> Hi Stefano,
> 
> On Thu, Dec 27, 2012 at 8:09 AM, Stefano Babic <sbabic at denx.de> wrote:
> 
>> Hi Fabio, hi Robert,
>>
>> the new pmic framework calls malloc(), that the reason. It is then safe
>> to call the init from board_late_init().
>>
>> Tested-by: Stefano Babic <sbabic at denx.de>
>>
>> Applied to u-boot-imx, thanks.
>>
>> gcc 4.6.4, it boots always here.
> 
> Ok, great.
> 
> When you enter commands in the U-boot prompt, does it work fine?

Yes, it is.

> With
> the toolchains that myself and Robert used we are seeing resets.
> 
> I would like to try the same gcc 4.6.4 toolchain you are using. Where
> do you get it from?

It comes from ELDK-5.2.1

> 

I am playing a bit, I do not see your problem. I admit I have no idea
which dialog version is on my board.

The only issue I can see is with MMC - I see with "fatls" any entry twice:

MX53LOCO U-Boot > fatls mmc 0:2
        1   cmdline
        1   cmdline
   283472   u-boot.bin
   283472   u-boot.bin
   284496   u-boot.imx
   284496   u-boot.imx
  4093544   uimage
  4093544   uimage
   160291   uinitrd
   160291   uinitrd
      349   boot.txt
      349   boot.txt
      421   boot.scr
      421   boot.scr

But this is surely another issue....

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================