[U-Boot] [PATCH 11/16] Sound: WM8994: Add FDT support to codec
Minkyu Kang
mk7.kang at samsung.com
Wed Dec 26 12:55:15 CET 2012
Dear Rajeshwari Shinde,
On 14/12/12 20:56, Rajeshwari Shinde wrote:
> This patch adds FDT support to the codec.
>
> Signed-off-by: Rajeshwari Shinde <rajeshwari.s at samsung.com>
> Acked-by: Simon Glass <sjg at chromium.org>
> ---
> Changes in V1:
> -Rebased on latest u-boot-samsung
> drivers/sound/wm8994.c | 76 ++++++++++++++++++++++++++++++++++++++++++++++-
> drivers/sound/wm8994.h | 6 +--
> 2 files changed, 76 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/sound/wm8994.c b/drivers/sound/wm8994.c
> index 293903a..a528502 100644
> --- a/drivers/sound/wm8994.c
> +++ b/drivers/sound/wm8994.c
> @@ -26,9 +26,11 @@
> #include <asm/io.h>
> #include <common.h>
> #include <div64.h>
> +#include <fdtdec.h>
> #include <i2c.h>
> #include <i2s.h>
> #include <sound.h>
> +#include <asm/arch/sound.h>
> #include "wm8994.h"
> #include "wm8994_registers.h"
>
> @@ -77,6 +79,7 @@ static int bclk_divs[] = {
>
> static struct wm8994_priv g_wm8994_info;
> static unsigned char g_wm8994_i2c_dev_addr;
> +static struct sound_codec_info g_codec_info;
>
> /*
> * Initialise I2C for wm 8994
> @@ -747,13 +750,82 @@ err:
> return -1;
> }
>
> +/*
> + * Gets fdt values for wm8994 config parameters
> + *
> + * @param pcodec_info codec information structure
> + * @param blob FDT blob
> + * @return int value, 0 for success
> + */
> +static int get_codec_values(struct sound_codec_info *pcodec_info,
> + const void *blob)
> +{
> + int error = 0;
> +#ifdef CONFIG_OF_CONTROL
> + enum fdt_compat_id compat;
> + int node;
> + int parent;
> +
> + /* Get the node from FDT for codec */
> + node = fdtdec_next_compatible(blob, 0, COMPAT_WOLFSON_WM8994_CODEC);
> + if (node <= 0) {
> + debug("EXYNOS_SOUND: No node for codec in device tree\n");
> + debug("node = %d\n", node);
> + return -1;
> + }
> +
> + parent = fdt_parent_offset(blob, node);
> + if (parent < 0) {
> + debug("%s: Cannot find node parent\n", __func__);
> + return -1;
> + }
> +
> + compat = fdtdec_lookup(blob, parent);
> + switch (compat) {
> + case COMPAT_SAMSUNG_S3C2440_I2C:
> + pcodec_info->i2c_bus = i2c_get_bus_num_fdt(parent);
> + error |= pcodec_info->i2c_bus;
> + debug("i2c bus = %d\n", pcodec_info->i2c_bus);
> + pcodec_info->i2c_dev_addr = fdtdec_get_int(blob, node,
> + "reg", 0);
> + error |= pcodec_info->i2c_dev_addr;
> + debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr);
> + break;
> + default:
> + debug("%s: Unknown compat id %d\n", __func__, compat);
> + return -1;
> + }
> +#else
> + pcodec_info->i2c_bus = AUDIO_I2C_BUS;
> + pcodec_info->i2c_dev_addr = AUDIO_I2C_REG;
> + debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr);
> +#endif
> +
> + pcodec_info->codec_type = CODEC_WM_8994;
> +
> + if (error == -1) {
> + debug("fail to get wm8994 codec node properties\n");
> + return -1;
> + }
> +
> + return 0;
please remove this blank line.
> +
> +}
> +
please remove this blank line.
> +
> /*wm8994 Device Initialisation */
> -int wm8994_init(struct sound_codec_info *pcodec_info,
> - enum en_audio_interface aif_id,
> +int wm8994_init(const void *blob, enum en_audio_interface aif_id,
> int sampling_rate, int mclk_freq,
> int bits_per_sample, unsigned int channels)
> {
> int ret = 0;
> + struct sound_codec_info *pcodec_info = &g_codec_info;
> +
> + /* Get the codec Values */
> + if (get_codec_values(pcodec_info, blob) < 0) {
> + debug("FDT Codec values failed\n");
> + return -1;
> + }
>
> /* shift the device address by 1 for 7 bit addressing */
> g_wm8994_i2c_dev_addr = pcodec_info->i2c_dev_addr;
> diff --git a/drivers/sound/wm8994.h b/drivers/sound/wm8994.h
> index a8f0de1..a1e8335 100644
> --- a/drivers/sound/wm8994.h
> +++ b/drivers/sound/wm8994.h
> @@ -69,8 +69,7 @@ enum wm8994_type {
> /*
> * intialise wm8994 sound codec device for the given configuration
> *
> - * @param pcodec_info pointer value of the sound codec info structure
> - * parsed from device tree
> + * @param blob FDT node for codec values
> * @param aif_id enum value of codec interface port in which
> * soc i2s is connected
> * @param sampling_rate Sampling rate ranges between from 8khz to 96khz
> @@ -80,8 +79,7 @@ enum wm8994_type {
> *
> * @returns -1 for error and 0 Success.
> */
> -int wm8994_init(struct sound_codec_info *pcodec_info,
> - enum en_audio_interface aif_id,
> +int wm8994_init(const void *blob, enum en_audio_interface aif_id,
> int sampling_rate, int mclk_freq,
> int bits_per_sample, unsigned int channels);
> #endif /*__WM8994_H__ */
>
--
Thanks,
Minkyu Kang.
More information about the U-Boot
mailing list