[U-Boot] [PATCH 0/3] I2C designware patches

[Armando Visconti]

Hello Vipin,

I have prepared this patch after the work I have done for the new
asic which embeds the I2C designware IP configured with the
stop bit controlled by s/w.

I quickly tested it on both this asic AND the SPEAr1340, but if
you can quickly check yourself would be good.

I think that this patch may be included in the work you are
preparing on your own repo, but I rebased this work on
the Heiko's u-boot-i2c.git repo.

Thx,
Arm


Armando Visconti (3):
  designware_i2c.c: Added the support for MULTI_BUS
  designware_i2c: Added s/w generation of stop bit
  designware_i2c: Fixed the setting of the i2c bus speed

 drivers/i2c/designware_i2c.c |  121 +++++++++++++++++++++++++++++++++++-------
 drivers/i2c/designware_i2c.h |    1 +
 2 files changed, 103 insertions(+), 19 deletions(-)

-- 
1.7.4.4