[U-Boot] [PATCH 04/16 V2] EXYNOS5: FDT : Decode peripheral id

[Rajeshwari Shinde]

Api is added to decode peripheral id based on the interrupt number
of the peripheral.

Signed-off-by: Rajeshwari Shinde <rajeshwari.s at samsung.com>
Acked-by: Simon Glass <sjg at chromium.org>
---
Changes since V1:
	- Removed hardcoded numbers.
 arch/arm/cpu/armv7/exynos/pinmux.c        |   29 +++++++++++++++++++++++++
 arch/arm/include/asm/arch-exynos/periph.h |   33 +++++++++++++++++-----------
 arch/arm/include/asm/arch-exynos/pinmux.h |    8 +++++++
 3 files changed, 57 insertions(+), 13 deletions(-)

diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
index 20a4b84..40f83b5 100644
--- a/arch/arm/cpu/armv7/exynos/pinmux.c
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -22,6 +22,7 @@
  */
 
 #include <common.h>
+#include <fdtdec.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch/sromc.h>
@@ -402,3 +403,31 @@ int exynos_pinmux_config(int peripheral, int flags)
 		return -1;
 	}
 }
+
+#ifdef CONFIG_OF_CONTROL
+static int exynos5_pinmux_decode_periph_id(const void *blob, int node)
+{
+	int err;
+	u32 cell[3];
+
+	err = fdtdec_get_int_array(blob, node, "interrupts", cell,
+					ARRAY_SIZE(cell));
+	if (err)
+		return PERIPH_ID_NONE;
+
+	/* check for invalid peripheral id */
+	if ((PERIPH_ID_SDMMC4 > cell[1]) || (cell[1] < PERIPH_ID_UART0))
+		return cell[1];
+
+	debug(" invalid peripheral id\n");
+	return PERIPH_ID_NONE;
+}
+
+int pinmux_decode_periph_id(const void *blob, int node)
+{
+	if (cpu_is_exynos5())
+		return  exynos5_pinmux_decode_periph_id(blob, node);
+	else
+		return PERIPH_ID_NONE;
+}
+#endif
diff --git a/arch/arm/include/asm/arch-exynos/periph.h b/arch/arm/include/asm/arch-exynos/periph.h
index 13abd2d..89bcdfc 100644
--- a/arch/arm/include/asm/arch-exynos/periph.h
+++ b/arch/arm/include/asm/arch-exynos/periph.h
@@ -25,12 +25,17 @@
 #define __ASM_ARM_ARCH_PERIPH_H
 
 /*
- * Peripherals requiring clock/pinmux configuration. List will
+ * Peripherals required for pinmux configuration. List will
  * grow with support for more devices getting added.
+ * Numbering based on interrupt table.
  *
  */
 enum periph_id {
-	PERIPH_ID_I2C0,
+	PERIPH_ID_UART0 = 51,
+	PERIPH_ID_UART1,
+	PERIPH_ID_UART2,
+	PERIPH_ID_UART3,
+	PERIPH_ID_I2C0 = 56,
 	PERIPH_ID_I2C1,
 	PERIPH_ID_I2C2,
 	PERIPH_ID_I2C3,
@@ -38,22 +43,24 @@ enum periph_id {
 	PERIPH_ID_I2C5,
 	PERIPH_ID_I2C6,
 	PERIPH_ID_I2C7,
-	PERIPH_ID_I2S1,
-	PERIPH_ID_SDMMC0,
+	PERIPH_ID_SPI0 = 68,
+	PERIPH_ID_SPI1,
+	PERIPH_ID_SPI2,
+	PERIPH_ID_SDMMC0 = 75,
 	PERIPH_ID_SDMMC1,
 	PERIPH_ID_SDMMC2,
 	PERIPH_ID_SDMMC3,
-	PERIPH_ID_SDMMC4,
-	PERIPH_ID_SROMC,
-	PERIPH_ID_SPI0,
-	PERIPH_ID_SPI1,
-	PERIPH_ID_SPI2,
+	PERIPH_ID_I2S1 = 99,
+
+	/* Since following peripherals do
+	 * not have shared peripheral interrupts (SPIs)
+	 * they are numbered arbitiraly after the maximum
+	 * SPIs Exynos has (128)
+	 */
+	PERIPH_ID_SROMC = 128,
 	PERIPH_ID_SPI3,
 	PERIPH_ID_SPI4,
-	PERIPH_ID_UART0,
-	PERIPH_ID_UART1,
-	PERIPH_ID_UART2,
-	PERIPH_ID_UART3,
+	PERIPH_ID_SDMMC4,
 
 	PERIPH_ID_COUNT,
 	PERIPH_ID_NONE = -1,
diff --git a/arch/arm/include/asm/arch-exynos/pinmux.h b/arch/arm/include/asm/arch-exynos/pinmux.h
index 10ea736..014eebc 100644
--- a/arch/arm/include/asm/arch-exynos/pinmux.h
+++ b/arch/arm/include/asm/arch-exynos/pinmux.h
@@ -55,4 +55,12 @@ enum {
  */
 int exynos_pinmux_config(int peripheral, int flags);
 
+/**
+ * Decode the peripheral id using the interrpt numbers.
+ *
+ * @param blob  Device tree blob
+ * @param node  FDT I2C node to find
+ * @return peripheral id if ok, PERIPH_ID_NONE on error
+ */
+int pinmux_decode_periph_id(const void *blob, int node);
 #endif
-- 
1.7.4.4