[U-Boot] [PATCH] mx53loco: Call PMIC related functions from board_late_init()

[Albert ARIBAUD]

Hi Stefano,

On Fri, 28 Dec 2012 09:38:47 +0100, Stefano Babic <sbabic at denx.de>
wrote:
> On 27/12/2012 17:27, Albert ARIBAUD wrote:
> > Hi Stefano,
> > 
> 
> Hi Albert,
> 
> >> I am playing a bit, I do not see your problem. I admit I have no idea
> >> which dialog version is on my board.
> >>
> >> The only issue I can see is with MMC - I see with "fatls" any entry twice:
> >>
> >> MX53LOCO U-Boot > fatls mmc 0:2
> >>         1   cmdline
> >>         1   cmdline
> >>    283472   u-boot.bin
> >>    283472   u-boot.bin
> >>    284496   u-boot.imx
> >>    284496   u-boot.imx
> >>   4093544   uimage
> >>   4093544   uimage
> >>    160291   uinitrd
> >>    160291   uinitrd
> >>       349   boot.txt
> >>       349   boot.txt
> >>       421   boot.scr
> >>       421   boot.scr
> >>
> >> But this is surely another issue....
> > 
> > Re the double entries, did you check if these could be short / DOS (8.3)
> > names vs long names? IIRC, for compatibility, in a (V)FAT directory any
> > entry with a name longer than 8.3 has a matching short entry; maybe on
> > the device you're ls'ing, *any* entry has a short version?
> 
> That is the point. I tested with another SD-Card, putting also long
> names, and I get:
> 
>      614   loadbootscr.scr
>       614   loadbo~1.scr
>   2606096   swupdate-image-thb.ext3.gz.u-boot
>   2606096   swupda~1.u-b
>   3893896   uimage-thb.bin
>   3893896   uimage~1.bin
> 
> There is an entry for long name and one for short name. And with the
> other SD, all entries has a short version. Simply I do not remember I
> have already seen the double entries in the past..

Yes, normally there should be two different entries; my question was,
more precisely, whether you checked if the very SD card with which you
saw duplicates appear actually held such duplicates -- as opposed to
holding single entries duplicated by the U-Boot code.

> Best regards,
> Stefano

Amicalement,
-- 
Albert.