[U-Boot] [PATCH V3 7/7] Tegra30: Add/enable Cardhu build (T30 reference board)
Tom Warren
twarren.nvidia at gmail.com
Wed Dec 12 00:34:18 CET 2012
This build is stripped down. It boots to the command prompt.
GPIO is the only peripheral supported. Others TBD.
include/configs/tegra-common.h now holds common config options
for Tegra SoCs.
Signed-off-by: Tom Warren <twarren at nvidia.com>
---
---
V2:
* Move pinmux_init to cardhu.c, move pinmux-config header here, too.
* tegra-common.h holds CONFIG options/defines commmon to all Tegra SoCs.
V3:
* Remove REALTEK HDA section in pinmux-config header
* Use 408MHz UART clock on T30 (still 216MHz on T20)
* Remove CONFIG_SYS_CPU_OSC_FREQUENCY (unused)
* Move MEM_LAYOUT_ENV settings to tegraXX-common.h
board/nvidia/cardhu/Makefile | 44 +++
board/nvidia/cardhu/cardhu.c | 39 +++
board/nvidia/cardhu/pinmux-config-cardhu.h | 329 ++++++++++++++++++++
boards.cfg | 1 +
include/configs/cardhu.h | 45 +++
include/configs/tegra-common-post.h | 27 --
.../configs/{tegra20-common.h => tegra-common.h} | 59 +----
include/configs/tegra20-common.h | 199 ++++---------
include/configs/tegra30-common.h | 86 +++++
9 files changed, 602 insertions(+), 227 deletions(-)
create mode 100644 board/nvidia/cardhu/Makefile
create mode 100644 board/nvidia/cardhu/cardhu.c
create mode 100644 board/nvidia/cardhu/pinmux-config-cardhu.h
create mode 100644 include/configs/cardhu.h
copy include/configs/{tegra20-common.h => tegra-common.h} (72%)
create mode 100644 include/configs/tegra30-common.h
diff --git a/board/nvidia/cardhu/Makefile b/board/nvidia/cardhu/Makefile
new file mode 100644
index 0000000..913f1ce
--- /dev/null
+++ b/board/nvidia/cardhu/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2010-2012
+# NVIDIA Corporation <www.nvidia.com>
+#
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := $(BOARD).o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/nvidia/cardhu/cardhu.c b/board/nvidia/cardhu/cardhu.c
new file mode 100644
index 0000000..df4cb6b
--- /dev/null
+++ b/board/nvidia/cardhu/cardhu.c
@@ -0,0 +1,39 @@
+/*
+ * (C) Copyright 2010-2012
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/pinmux.h>
+#include "pinmux-config-cardhu.h"
+
+/*
+ * Routine: pinmux_init
+ * Description: Do individual peripheral pinmux configs
+ */
+void pinmux_init(void)
+{
+ pinmux_config_table(tegra3_pinmux_common,
+ ARRAY_SIZE(tegra3_pinmux_common));
+
+ pinmux_config_table(unused_pins_lowpower,
+ ARRAY_SIZE(unused_pins_lowpower));
+}
diff --git a/board/nvidia/cardhu/pinmux-config-cardhu.h b/board/nvidia/cardhu/pinmux-config-cardhu.h
new file mode 100644
index 0000000..3162219
--- /dev/null
+++ b/board/nvidia/cardhu/pinmux-config-cardhu.h
@@ -0,0 +1,329 @@
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _PINMUX_CONFIG_CARDHU_H_
+#define _PINMUX_CONFIG_CARDHU_H_
+
+#define DEFAULT_PINMUX(_pingroup, _mux, _pull, _tri, _io) \
+ { \
+ .pingroup = PINGRP_##_pingroup, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_DEFAULT, \
+ .od = PMUX_PIN_OD_DEFAULT, \
+ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
+ }
+
+#define I2C_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _od) \
+ { \
+ .pingroup = PINGRP_##_pingroup, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_##_lock, \
+ .od = PMUX_PIN_OD_##_od, \
+ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
+ }
+
+#define LV_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _ioreset) \
+ { \
+ .pingroup = PINGRP_##_pingroup, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_##_lock, \
+ .od = PMUX_PIN_OD_DEFAULT, \
+ .ioreset = PMUX_PIN_IO_RESET_##_ioreset \
+ }
+
+static struct pingroup_config tegra3_pinmux_common[] = {
+ /* SDMMC1 pinmux */
+ DEFAULT_PINMUX(SDMMC1_CLK, SDMMC1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_CMD, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT3, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT2, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT1, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT0, SDMMC1, UP, NORMAL, INPUT),
+
+ /* SDMMC3 pinmux */
+ DEFAULT_PINMUX(SDMMC3_CLK, SDMMC3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_CMD, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT0, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT1, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT2, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT3, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT6, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT7, RSVD1, NORMAL, NORMAL, INPUT),
+
+ /* SDMMC4 pinmux */
+ LV_PINMUX(SDMMC4_CLK, SDMMC4, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_CMD, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT0, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT1, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT2, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT3, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT4, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT5, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT6, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT7, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_RST_N, RSVD1, DOWN, NORMAL, INPUT, DISABLE, DISABLE),
+
+ /* I2C1 pinmux */
+ I2C_PINMUX(GEN1_I2C_SCL, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(GEN1_I2C_SDA, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ /* I2C2 pinmux */
+ I2C_PINMUX(GEN2_I2C_SCL, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(GEN2_I2C_SDA, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ /* I2C3 pinmux */
+ I2C_PINMUX(CAM_I2C_SCL, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(CAM_I2C_SDA, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ /* I2C4 pinmux */
+ I2C_PINMUX(DDC_SCL, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(DDC_SDA, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ /* Power I2C pinmux */
+ I2C_PINMUX(PWR_I2C_SCL, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(PWR_I2C_SDA, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ DEFAULT_PINMUX(ULPI_DATA0, UARTA, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(ULPI_DATA1, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA2, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA3, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA4, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA5, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA6, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA7, UARTA, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(ULPI_CLK, UARTD, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(ULPI_DIR, UARTD, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_NXT, UARTD, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_STP, UARTD, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(DAP3_FS, I2S2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP3_DIN, I2S2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP3_DOUT, I2S2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP3_SCLK, I2S2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PV2, OWR, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GPIO_PV3, RSVD1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(CLK2_OUT, EXTPERIPH2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CLK2_REQ, DAP, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_PWR1, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_PWR2, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_SDIN, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_SDOUT, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_WR_N, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_CS0_N, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_DC0, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_SCK, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_PWR0, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_PCLK, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_DE, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_HSYNC, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_VSYNC, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D0, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D1, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D2, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D3, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D4, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D5, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D6, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D7, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D8, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D9, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D10, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D11, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D12, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D13, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D14, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D15, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D16, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D17, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D18, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D19, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D20, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D21, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D22, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D23, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_CS1_N, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_M1, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_DC1, DISPA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CRT_HSYNC, CRT, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(CRT_VSYNC, CRT, NORMAL, NORMAL, OUTPUT),
+ LV_PINMUX(VI_D0, RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D1, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D2, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D3, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D4, VI, NORMAL, NORMAL, OUTPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D5, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D7, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D10, RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_MCLK, VI, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ DEFAULT_PINMUX(UART2_RXD, IRDA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART2_TXD, IRDA, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(UART2_RTS_N, UARTB, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(UART2_CTS_N, UARTB, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART3_TXD, UARTC, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(UART3_RXD, UARTC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART3_CTS_N, UARTC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART3_RTS_N, UARTC, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GPIO_PU0, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PU1, RSVD1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GPIO_PU2, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PU3, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PU4, PWM1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GPIO_PU5, PWM2, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GPIO_PU6, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_FS, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_DIN, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_DOUT, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_SCLK, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CLK3_OUT, EXTPERIPH3, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(CLK3_REQ, DEV3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_WP_N, GMI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_CS2_N, RSVD1, UP, NORMAL, INPUT), /* EN_VDD_BL1 */
+ DEFAULT_PINMUX(GMI_AD8, PWM0, NORMAL, NORMAL, OUTPUT), /* LCD1_BL_PWM */
+ DEFAULT_PINMUX(GMI_AD10, NAND, NORMAL, NORMAL, OUTPUT), /* LCD1_BL_EN */
+ DEFAULT_PINMUX(GMI_A16, SPI4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_A17, SPI4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_A18, SPI4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_A19, SPI4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CAM_MCLK, VI_ALT2, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PCC1, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB0, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB3, VGP3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB5, VGP5, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB6, VGP6, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB7, I2S4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PCC2, I2S4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(JTAG_RTCK, RTCK, NORMAL, NORMAL, OUTPUT),
+
+ /* KBC keys */
+ DEFAULT_PINMUX(KB_ROW0, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW1, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW2, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW3, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW4, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW5, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW6, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW7, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW8, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW9, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW10, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW11, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW12, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW13, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW14, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW15, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL0, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL1, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL2, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL3, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL4, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL5, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL6, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL7, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PV0, RSVD1, UP, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(CLK_32K_OUT, BLINK, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(SYS_CLK_REQ, SYSCLK, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(OWR, OWR, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP1_FS, I2S0, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP1_DIN, I2S0, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP1_DOUT, I2S0, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP1_SCLK, I2S0, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CLK1_REQ, DAP, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CLK1_OUT, EXTPERIPH1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPDIF_IN, SPDIF, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPDIF_OUT, SPDIF, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(DAP2_FS, I2S1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_DIN, I2S1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_DOUT, I2S1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_SCLK, I2S1, NORMAL, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(SPI2_CS1_N, SPI2, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI1_MOSI, SPI1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI1_SCK, SPI1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI1_CS0_N, SPI1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI1_MISO, SPI1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L0_PRSNT_N, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L0_RST_N, PCIE, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PEX_L0_CLKREQ_N, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_WAKE_N, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L1_PRSNT_N, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L1_RST_N, PCIE, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PEX_L1_CLKREQ_N, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L2_PRSNT_N, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L2_RST_N, PCIE, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PEX_L2_CLKREQ_N, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(HDMI_CEC, CEC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(HDMI_INT, RSVD1, NORMAL, TRISTATE, INPUT),
+
+ /* GPIOs */
+ /* SDMMC1 CD gpio */
+ DEFAULT_PINMUX(GMI_IORDY, RSVD1, UP, NORMAL, INPUT),
+ /* SDMMC1 WP gpio */
+ LV_PINMUX(VI_D11, RSVD1, UP, NORMAL, INPUT, DISABLE, DISABLE),
+
+ /* Touch panel GPIO */
+ /* Touch IRQ */
+ DEFAULT_PINMUX(GMI_AD12, NAND, UP, NORMAL, INPUT),
+
+ /* Touch RESET */
+ DEFAULT_PINMUX(GMI_AD14, NAND, NORMAL, NORMAL, OUTPUT),
+
+ /* Power rails GPIO */
+ DEFAULT_PINMUX(SPI2_SCK, GMI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PBB4, VGP4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW8, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT5, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT4, SDMMC3, UP, NORMAL, INPUT),
+
+ LV_PINMUX(VI_D6, VI, NORMAL, NORMAL, OUTPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D8, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D9, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_PCLK, RSVD1, UP, TRISTATE, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_HSYNC, RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_VSYNC, RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+};
+
+static struct pingroup_config unused_pins_lowpower[] = {
+ DEFAULT_PINMUX(GMI_WAIT, NAND, UP, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_ADV_N, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_CLK, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_CS3_N, NAND, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_CS7_N, NAND, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD0, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD1, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD2, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD3, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD4, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD5, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD6, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD7, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD9, PWM1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD11, NAND, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD13, NAND, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_WR_N, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_OE_N, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_DQS, NAND, NORMAL, TRISTATE, OUTPUT),
+};
+
+#endif /* _PINMUX_CONFIG_CARDHU_H_ */
diff --git a/boards.cfg b/boards.cfg
index 6f21af0..01fd77f 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -287,6 +287,7 @@ harmony arm armv7:arm720t harmony nvidia
seaboard arm armv7:arm720t seaboard nvidia tegra20
ventana arm armv7:arm720t ventana nvidia tegra20
whistler arm armv7:arm720t whistler nvidia tegra20
+cardhu arm armv7:arm720t cardhu nvidia tegra30
colibri_t20_iris arm armv7:arm720t colibri_t20_iris toradex tegra20
u8500_href arm armv7 u8500 st-ericsson u8500
snowball arm armv7 snowball st-ericsson u8500
diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h
new file mode 100644
index 0000000..471df6e
--- /dev/null
+++ b/include/configs/cardhu.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/sizes.h>
+
+#include "tegra30-common.h"
+
+/* Enable fdt support for Cardhu. Flash the image in u-boot-dtb.bin */
+#define CONFIG_DEFAULT_DEVICE_TREE tegra30-cardhu
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
+/* High-level configuration options */
+#define V_PROMPT "Tegra30 (Cardhu) # "
+#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Cardhu"
+
+/* Board-specific serial config */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_TEGRA_ENABLE_UARTA
+#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
+
+#define CONFIG_MACH_TYPE MACH_TYPE_CARDHU
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_ENV_IS_NOWHERE
+
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h
index c9c49d9..dee96da 100644
--- a/include/configs/tegra-common-post.h
+++ b/include/configs/tegra-common-post.h
@@ -119,33 +119,6 @@
#endif
-/*
- * Memory layout for where various images get loaded by boot scripts:
- *
- * scriptaddr can be pretty much anywhere that doesn't conflict with something
- * else. Put it above BOOTMAPSZ to eliminate conflicts.
- *
- * kernel_addr_r must be within the first 128M of RAM in order for the
- * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
- * decompress itself to 0x8000 after the start of RAM, kernel_addr_r
- * should not overlap that area, or the kernel will have to copy itself
- * somewhere else before decompression. Similarly, the address of any other
- * data passed to the kernel shouldn't overlap the start of RAM. Pushing
- * this up to 16M allows for a sizable kernel to be decompressed below the
- * compressed load address.
- *
- * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
- * the compressed kernel to be up to 16M too.
- *
- * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
- * for the FDT/DTB to be up to 1M, which is hopefully plenty.
- */
-#define MEM_LAYOUT_ENV_SETTINGS \
- "scriptaddr=0x10000000\0" \
- "kernel_addr_r=0x01000000\0" \
- "fdt_addr_r=0x02000000\0" \
- "ramdisk_addr_r=0x02100000\0" \
-
#ifndef TEGRA_DEVICE_SETTINGS
#ifdef CONFIG_TEGRA_KEYBOARD
#define STDIN_KBD_KBC ",tegra-kbc"
diff --git a/include/configs/tegra20-common.h b/include/configs/tegra-common.h
similarity index 72%
copy from include/configs/tegra20-common.h
copy to include/configs/tegra-common.h
index efd92e0..80c846c 100644
--- a/include/configs/tegra20-common.h
+++ b/include/configs/tegra-common.h
@@ -21,8 +21,8 @@
* MA 02111-1307 USA
*/
-#ifndef __TEGRA20_COMMON_H
-#define __TEGRA20_COMMON_H
+#ifndef _TEGRA_COMMON_H_
+#define _TEGRA_COMMON_H_
#include <asm/sizes.h>
#include <linux/stringify.h>
@@ -30,7 +30,6 @@
* High Level Configuration Options
*/
#define CONFIG_ARMCORTEXA9 /* This is an ARM V7 CPU core */
-#define CONFIG_TEGRA20 /* in a NVidia Tegra20 core */
#define CONFIG_TEGRA /* which is a Tegra generic machine */
#define CONFIG_SYS_L2CACHE_OFF /* No L2 cache */
@@ -38,9 +37,6 @@
#include <asm/arch/tegra.h> /* get chip and board defs */
-/* Align LCD to 1MB boundary */
-#define CONFIG_LCD_ALIGNMENT MMU_SECTION_SIZE
-
/*
* Display CPU and Board information
*/
@@ -50,16 +46,6 @@
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_OF_LIBFDT /* enable passing of devicetree */
-#ifdef CONFIG_TEGRA_LP0
-#define TEGRA_LP0_ADDR 0x1C406000
-#define TEGRA_LP0_SIZE 0x2000
-#define TEGRA_LP0_VEC \
- "lp0_vec=" __stringify(TEGRA_LP0_SIZE) \
- "@" __stringify(TEGRA_LP0_ADDR) " "
-#else
-#define TEGRA_LP0_VEC
-#endif
-
/* Environment */
#define CONFIG_ENV_VARS_UBOOT_CONFIG
#define CONFIG_ENV_SIZE 0x2000 /* Total Size Environment */
@@ -70,15 +56,8 @@
#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */
/*
- * PllX Configuration
- */
-#define CONFIG_SYS_CPU_OSC_FREQUENCY 1000000 /* Set CPU clock to 1GHz */
-
-/*
* NS16550 Configuration
*/
-#define V_NS16550_CLK 216000000 /* 216MHz (pllp_out0) */
-
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
@@ -92,26 +71,9 @@
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
- 115200}
-
-/*
- * This parameter affects a TXFILLTUNING field that controls how much data is
- * sent to the latency fifo before it is sent to the wire. Without this
- * parameter, the default (2) causes occasional Data Buffer Errors in OUT
- * packets depending on the buffer address and size.
- */
-#define CONFIG_USB_EHCI_TXFIFO_THRESH 10
-#define CONFIG_EHCI_IS_TDI
-#define CONFIG_EHCI_DCACHE
-
-/* Total I2C ports on Tegra20 */
-#define TEGRA_I2C_NUM_CONTROLLERS 4
/* include default commands */
#include <config_cmd_default.h>
-#define CONFIG_PARTITION_UUIDS
-#define CONFIG_CMD_PART
/* remove unused commands */
#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
@@ -130,8 +92,6 @@
#define CONFIG_CONSOLE_MUX
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
-#define CONFIG_LOADADDR 0x408000 /* def. location for kernel */
#define CONFIG_BOOTDELAY 2 /* -1 to disable auto boot */
/*
@@ -155,11 +115,8 @@
#define CONFIG_SYS_MEMTEST_START (NV_PA_SDRC_CS0 + 0x600000)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
-#define CONFIG_SYS_LOAD_ADDR (0xA00800) /* default */
#define CONFIG_SYS_HZ 1000
-#define CONFIG_STACKBASE 0x2800000 /* 40MB */
-
/*-----------------------------------------------------------------------
* Physical Memory Map
*/
@@ -167,11 +124,10 @@
#define PHYS_SDRAM_1 NV_PA_SDRC_CS0
#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512M */
-#define CONFIG_SYS_TEXT_BASE 0x0010c000
#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */
+#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_STACKBASE
#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN
@@ -190,20 +146,13 @@
#define CONFIG_SPL_RAM_DEVICE
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NAND_SIMPLE
-#define CONFIG_SPL_TEXT_BASE 0x00108000
#define CONFIG_SPL_MAX_SIZE (CONFIG_SYS_TEXT_BASE - \
CONFIG_SPL_TEXT_BASE)
-#define CONFIG_SYS_SPL_MALLOC_START 0x00090000
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000
-#define CONFIG_SPL_STACK 0x000ffffc
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra20/u-boot-spl.lds"
-
-#define CONFIG_SYS_NAND_SELF_INIT
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#endif /* __TEGRA20_COMMON_H */
+#endif /* _TEGRA_COMMON_H_ */
diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h
index efd92e0..5143b64 100644
--- a/include/configs/tegra20-common.h
+++ b/include/configs/tegra20-common.h
@@ -21,34 +21,70 @@
* MA 02111-1307 USA
*/
-#ifndef __TEGRA20_COMMON_H
-#define __TEGRA20_COMMON_H
-#include <asm/sizes.h>
-#include <linux/stringify.h>
+#ifndef _TEGRA20_COMMON_H_
+#define _TEGRA20_COMMON_H_
+#include "tegra-common.h"
+
+/*
+ * NS16550 Configuration
+ */
+#define V_NS16550_CLK 216000000 /* 216MHz (pllp_out0) */
/*
* High Level Configuration Options
*/
-#define CONFIG_ARMCORTEXA9 /* This is an ARM V7 CPU core */
-#define CONFIG_TEGRA20 /* in a NVidia Tegra20 core */
-#define CONFIG_TEGRA /* which is a Tegra generic machine */
-#define CONFIG_SYS_L2CACHE_OFF /* No L2 cache */
+#define CONFIG_TEGRA20 /* NVidia Tegra20 core */
-#define CONFIG_SYS_CACHELINE_SIZE 32
+/* Environment information, boards can override if required */
+#define CONFIG_LOADADDR 0x00408000 /* def. location for kernel */
-#include <asm/arch/tegra.h> /* get chip and board defs */
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LOAD_ADDR 0x00A00800 /* default */
+#define CONFIG_STACKBASE 0x2800000 /* 40MB */
-/* Align LCD to 1MB boundary */
-#define CONFIG_LCD_ALIGNMENT MMU_SECTION_SIZE
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_SYS_TEXT_BASE 0x0010E000
/*
- * Display CPU and Board information
+ * Memory layout for where various images get loaded by boot scripts:
+ *
+ * scriptaddr can be pretty much anywhere that doesn't conflict with something
+ * else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
+ * kernel_addr_r must be within the first 128M of RAM in order for the
+ * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
+ * decompress itself to 0x8000 after the start of RAM, kernel_addr_r
+ * should not overlap that area, or the kernel will have to copy itself
+ * somewhere else before decompression. Similarly, the address of any other
+ * data passed to the kernel shouldn't overlap the start of RAM. Pushing
+ * this up to 16M allows for a sizable kernel to be decompressed below the
+ * compressed load address.
+ *
+ * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
+ * the compressed kernel to be up to 16M too.
+ *
+ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
+ * for the FDT/DTB to be up to 1M, which is hopefully plenty.
*/
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
+#define MEM_LAYOUT_ENV_SETTINGS \
+ "scriptaddr=0x10000000\0" \
+ "kernel_addr_r=0x01000000\0" \
+ "fdt_addr_r=0x02000000\0" \
+ "ramdisk_addr_r=0x02100000\0"
+
+/* Defines for SPL */
+#define CONFIG_SPL_TEXT_BASE 0x00108000
+#define CONFIG_SYS_SPL_MALLOC_START 0x00090000
+#define CONFIG_SPL_STACK 0x000ffffc
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_OF_LIBFDT /* enable passing of devicetree */
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra20/u-boot-spl.lds"
+
+/* Align LCD to 1MB boundary */
+#define CONFIG_LCD_ALIGNMENT MMU_SECTION_SIZE
#ifdef CONFIG_TEGRA_LP0
#define TEGRA_LP0_ADDR 0x1C406000
@@ -60,41 +96,6 @@
#define TEGRA_LP0_VEC
#endif
-/* Environment */
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-#define CONFIG_ENV_SIZE 0x2000 /* Total Size Environment */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */
-
-/*
- * PllX Configuration
- */
-#define CONFIG_SYS_CPU_OSC_FREQUENCY 1000000 /* Set CPU clock to 1GHz */
-
-/*
- * NS16550 Configuration
- */
-#define V_NS16550_CLK 216000000 /* 216MHz (pllp_out0) */
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
-
-/*
- * select serial console configuration
- */
-#define CONFIG_CONS_INDEX 1
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
- 115200}
-
/*
* This parameter affects a TXFILLTUNING field that controls how much data is
* sent to the latency fifo before it is sent to the wire. Without this
@@ -108,102 +109,10 @@
/* Total I2C ports on Tegra20 */
#define TEGRA_I2C_NUM_CONTROLLERS 4
-/* include default commands */
-#include <config_cmd_default.h>
#define CONFIG_PARTITION_UUIDS
#define CONFIG_CMD_PART
-/* remove unused commands */
-#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
-#undef CONFIG_CMD_FPGA /* FPGA configuration support */
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_NFS /* NFS support */
-#undef CONFIG_CMD_NET /* network support */
-
-/* turn on command-line edit/hist/auto */
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_COMMAND_HISTORY
-#define CONFIG_AUTO_COMPLETE
-
-#define CONFIG_SYS_NO_FLASH
-
-#define CONFIG_CONSOLE_MUX
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
-#define CONFIG_LOADADDR 0x408000 /* def. location for kernel */
-#define CONFIG_BOOTDELAY 2 /* -1 to disable auto boot */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT V_PROMPT
-/*
- * Increasing the size of the IO buffer as default nfsargs size is more
- * than 256 and so it is not possible to edit it
- */
-#define CONFIG_SYS_CBSIZE (256 * 2) /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
-
-#define CONFIG_SYS_MEMTEST_START (NV_PA_SDRC_CS0 + 0x600000)
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
-
-#define CONFIG_SYS_LOAD_ADDR (0xA00800) /* default */
-#define CONFIG_SYS_HZ 1000
-
-#define CONFIG_STACKBASE 0x2800000 /* 40MB */
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 NV_PA_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512M */
-
-#define CONFIG_SYS_TEXT_BASE 0x0010c000
-#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-
-#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */
-
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_STACKBASE
-#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_TEGRA_GPIO
-#define CONFIG_CMD_GPIO
-#define CONFIG_CMD_ENTERRCM
-#define CONFIG_CMD_BOOTZ
-
-/* Defines for SPL */
-#define CONFIG_SPL
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_RAM_DEVICE
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_NAND_SIMPLE
-#define CONFIG_SPL_TEXT_BASE 0x00108000
-#define CONFIG_SPL_MAX_SIZE (CONFIG_SYS_TEXT_BASE - \
- CONFIG_SPL_TEXT_BASE)
-#define CONFIG_SYS_SPL_MALLOC_START 0x00090000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000
-#define CONFIG_SPL_STACK 0x000ffffc
-
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra20/u-boot-spl.lds"
-
#define CONFIG_SYS_NAND_SELF_INIT
#define CONFIG_SYS_NAND_ONFI_DETECTION
-#endif /* __TEGRA20_COMMON_H */
+#endif /* _TEGRA20_COMMON_H_ */
diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h
new file mode 100644
index 0000000..282caec
--- /dev/null
+++ b/include/configs/tegra30-common.h
@@ -0,0 +1,86 @@
+/*
+ * (C) Copyright 2010-2012
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TEGRA30_COMMON_H_
+#define _TEGRA30_COMMON_H_
+#include "tegra-common.h"
+
+/*
+ * NS16550 Configuration
+ */
+#define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_TEGRA30 /* in a NVidia Tegra30 core */
+
+/* Environment information, boards can override if required */
+#define CONFIG_LOADADDR 0x80408000 /* def. location for kernel */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LOAD_ADDR 0x80A00800 /* default */
+#define CONFIG_STACKBASE 0x82800000 /* 40MB */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_SYS_TEXT_BASE 0x8010E000
+
+/*
+ * Memory layout for where various images get loaded by boot scripts:
+ *
+ * scriptaddr can be pretty much anywhere that doesn't conflict with something
+ * else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
+ * kernel_addr_r must be within the first 128M of RAM in order for the
+ * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
+ * decompress itself to 0x8000 after the start of RAM, kernel_addr_r
+ * should not overlap that area, or the kernel will have to copy itself
+ * somewhere else before decompression. Similarly, the address of any other
+ * data passed to the kernel shouldn't overlap the start of RAM. Pushing
+ * this up to 16M allows for a sizable kernel to be decompressed below the
+ * compressed load address.
+ *
+ * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
+ * the compressed kernel to be up to 16M too.
+ *
+ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
+ * for the FDT/DTB to be up to 1M, which is hopefully plenty.
+ */
+#define MEM_LAYOUT_ENV_SETTINGS \
+ "scriptaddr=0x90000000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "fdt_addr_r=0x82000000\0" \
+ "ramdisk_addr_r=0x82100000\0"
+
+/* Defines for SPL */
+#define CONFIG_SPL_TEXT_BASE 0x80108000
+#define CONFIG_SYS_SPL_MALLOC_START 0x80090000
+#define CONFIG_SPL_STACK 0x800ffffc
+
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra30/u-boot-spl.lds"
+
+#endif /* _TEGRA30_COMMON_H_ */
--
1.7.0.4
More information about the U-Boot
mailing list