[U-Boot] [PATCH] lsxl: add support for lschlv2 and lsxhl

[Wolfgang Denk]

Dear Michael,

In message <b96abc7f27f132b4b00377ddd9ca632d.squirrel at ssl.serverraum.org> you wrote:
> 
> The linkstations don't have a (populated) serial port. There is no way to
> access an unmodified board other than using the netconsole. If you want to
> recover from a bad environment setting or an empty environment, you can do
> this only with a working network connection.

I understand they have USB?  Can we use console over USB instead?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Where shall I begin, please your Majesty?" he asked. "Begin  at  the
beginning,"  the  King said, gravely, "and go on till you come to the
end: then stop."    - Alice's Adventures in Wonderland, Lewis Carroll