January 2012 Archives by author
Starting: Sun Jan 1 00:05:11 CET 2012
Ending: Tue Jan 31 23:49:37 CET 2012
Messages: 2509
- [U-Boot] [PING] Re: [PATCH V3] ARM: fix s3c2410 timer code
"David Müller (ELSOFT AG)"
- [U-Boot] [PING] Re: [PATCH] ARM: activate DISPLAY_CPUINFO for VCMA9 + SMDK2410 board
"David Müller (ELSOFT AG)"
- [U-Boot] [PING] Re: [PATCH 0/4] use CFI driver for all MPL boards
"David Müller (ELSOFT AG)"
- [U-Boot] [GIT PULL] Pull request: u-boot-imx
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] compile the u-boot
Albert ARIBAUD
- [U-Boot] [PATCH] arm, arm-kirkwood: disable l2c before linux boot
Albert ARIBAUD
- [U-Boot] [PATCH V3 2/2] ARM: omap3: add support to Technexion twister board
Albert ARIBAUD
- [U-Boot] [PATCH 1/2 V3] arm926: Flush the data cache before disabling it
Albert ARIBAUD
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Albert ARIBAUD
- [U-Boot] [RFC PATCH v2 03/28] arm: Only display frame buffer info if there is LCD/video support
Albert ARIBAUD
- [U-Boot] [PATCH V3 2/2] ARM: omap3: add support to Technexion twister board
Albert ARIBAUD
- [U-Boot] [PATCH V3 2/2] ARM: omap3: add support to Technexion twister board
Albert ARIBAUD
- [U-Boot] [PATCH 1/2 V3] arm926: Flush the data cache before disabling it
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] [PATCH] edminiv2: add hush parser and long help
Albert ARIBAUD
- [U-Boot] [PATCH 0/4] Add USB support to orion5x and edminiv2
Albert ARIBAUD
- [U-Boot] [PATCH 1/4] Rename ehci-kirkwood as ehci-marvell
Albert ARIBAUD
- [U-Boot] [PATCH 2/4] Remove kirkwood-specifics from marvell EHCI driver
Albert ARIBAUD
- [U-Boot] [PATCH 3/4] orion5x: add USB host ehci-marvell support
Albert ARIBAUD
- [U-Boot] [PATCH 4/4] edminiv2: add USB host support
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH 0/4] Add USB support to orion5x and edminiv2
Albert ARIBAUD
- [U-Boot] [PATCH 0/4] Add USB support to orion5x and edminiv2
Albert ARIBAUD
- [U-Boot] [PATCH V2] edminiv2: add hush parser, cmdline editing and long help
Albert ARIBAUD
- [U-Boot] [PATCH v3 0/6] Introduce generic relocation feature
Albert ARIBAUD
- [U-Boot] pull request: u-boot-tegra/master
Albert ARIBAUD
- [U-Boot] [UPDATED] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] usage of i2c command in hush script
Sridhar Addagada
- [U-Boot] u-boot script "test"
Sridhar Addagada
- [U-Boot] u-boot script "test"
Sridhar Addagada
- [U-Boot] New MIPS64R2 Target in QEMU
Zain Ahmed
- [U-Boot] U-Boot not auto booting
Michael Aldridge
- [U-Boot] [PATCH] ns16550: tegra: Specify debugging serial port at boot.
Doug Anderson
- [U-Boot] [PATCH 0/2] Deprecate Linux bootargs munging with CONFIG_SILENT_CONSOLE.
Doug Anderson
- [U-Boot] [PATCH 1/2] config: Add CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE
Doug Anderson
- [U-Boot] [PATCH 2/2] bootm: Move silencing of linux console to deprecated config option.
Doug Anderson
- [U-Boot] [PATCH 1/2] config: Add CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE
Doug Anderson
- [U-Boot] [PATCH 0/2] Deprecate Linux bootargs munging with CONFIG_SILENT_CONSOLE.
Doug Anderson
- [U-Boot] [PATCH v2 0/2] Deprecate Linux bootargs munging with CONFIG_SILENT_CONSOLE.
Doug Anderson
- [U-Boot] [PATCH v2 1/2] config: Add CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE
Doug Anderson
- [U-Boot] [PATCH v2 2/2] bootm: Move silencing of linux console to deprecated config option.
Doug Anderson
- [U-Boot] [PATCH 0/2] Deprecate Linux bootargs munging with CONFIG_SILENT_CONSOLE.
Doug Anderson
- [U-Boot] [PATCH v3 0/3] Deprecate Linux bootargs munging with CONFIG_SILENT_CONSOLE.
Doug Anderson
- [U-Boot] [PATCH v3 1/3] config: Add CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE
Doug Anderson
- [U-Boot] [PATCH v3 2/3] bootm: Move silencing of linux console to deprecated config option.
Doug Anderson
- [U-Boot] [PATCH v3 3/3] config: Remove Blackfin CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE
Doug Anderson
- [U-Boot] [PATCH v2 0/2] Deprecate Linux bootargs munging with CONFIG_SILENT_CONSOLE.
Doug Anderson
- [U-Boot] [PATCH v2] bootm: Avoid 256-byte overflow in fixup_silent_linux()
Doug Anderson
- [U-Boot] [PATCH v2 0/2] Deprecate Linux bootargs munging with CONFIG_SILENT_CONSOLE.
Doug Anderson
- [U-Boot] [PATCH v3 3/3] config: Remove Blackfin CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE
Doug Anderson
- [U-Boot] [PATCH v3 3/3] config: Remove Blackfin CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE
Doug Anderson
- [U-Boot] [PATCH v2] bootm: Avoid 256-byte overflow in fixup_silent_linux()
Doug Anderson
- [U-Boot] [PATCH v3 3/3] config: Remove Blackfin CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE
Doug Anderson
- [U-Boot] [PATCH v3] bootm: Avoid 256-byte overflow in fixup_silent_linux()
Doug Anderson
- [U-Boot] [PATCH v3] bootm: Avoid 256-byte overflow in fixup_silent_linux()
Doug Anderson
- [U-Boot] [PATCH v4] bootm: Avoid 256-byte overflow in fixup_silent_linux()
Doug Anderson
- [U-Boot] U-Boot for EVAL-SPEAR1310-CPU
Zeeshan Aslam
- [U-Boot] SPL Linux Boot - updated
Stefano Babic
- [U-Boot] [PATCH V12 01/14] Add cmd_spl command
Stefano Babic
- [U-Boot] [PATCH V12 02/14] devki8000: add config for spl command
Stefano Babic
- [U-Boot] [PATCH V12 03/14] omap-common: Add NAND SPL linux booting
Stefano Babic
- [U-Boot] [PATCH V12 04/14] devkit8000/spl: init GPMC for dm9000 in SPL
Stefano Babic
- [U-Boot] [PATCH V12 05/14] omap-common/spl: Add linux boot to SPL
Stefano Babic
- [U-Boot] [PATCH V12 06/14] omap/spl: change output of spl_parse_image_header
Stefano Babic
- [U-Boot] [PATCH V12 07/14] devkit8000: Implement and activate direct OS boot
Stefano Babic
- [U-Boot] [PATCH V12 08/14] Add cache functions to SPL for armv7
Stefano Babic
- [U-Boot] [PATCH V12 09/14] OMAP3: SPL: do not call I2C init if no I2C is set.
Stefano Babic
- [U-Boot] [PATCH V12 10/14] OMAP3: move SPL files to be used by other architectures.
Stefano Babic
- [U-Boot] [PATCH V12 11/14] TI: SPL: make SPL available for other SOCs as TI
Stefano Babic
- [U-Boot] [PATCH V12 12/14] SPL: call cleanup_before_linux() before booting Linux
Stefano Babic
- [U-Boot] [PATCH V12 13/14] Fix build OMAP4/5
Stefano Babic
- [U-Boot] [PATCH V12 14/14] OMAP3: twister: add support to boot Linux from SPL
Stefano Babic
- [U-Boot] [PATCH V2 4/4] ARM: omap3: Added Teejet mt_ventoux
Stefano Babic
- [U-Boot] [PATCH V12 08/14] Add cache functions to SPL for armv7
Stefano Babic
- [U-Boot] [PATCH] MX28: Fix MXSBOOT segfault if no params specified
Stefano Babic
- [U-Boot] [PATCH] m28evk: Use GENERATED_GBL_DATA_SIZE
Stefano Babic
- [U-Boot] [PATCH V12 08/14] Add cache functions to SPL for armv7
Stefano Babic
- [U-Boot] [PATCH V2 4/4] ARM: omap3: Added Teejet mt_ventoux
Stefano Babic
- [U-Boot] [GIT PULL] Pull request: u-boot-imx
Stefano Babic
- [U-Boot] [GIT PULL] Pull request: u-boot-imx
Stefano Babic
- [U-Boot] [PATCH] M28EVK: Fix build if CONFIG_CMD_NAND not selected
Stefano Babic
- [U-Boot] [PATCH] mx28: fix clearing of IRQs in power init
Stefano Babic
- [U-Boot] [PATCH 1/3] m28evk: Remove CONFIG_NET_MULTI option
Stefano Babic
- [U-Boot] [PATCH] imx: mx6q: add aipstz init for off platform periph
Stefano Babic
- [U-Boot] [PATCH v4] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board
Stefano Babic
- [U-Boot] [PATCH v4] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board
Stefano Babic
- [U-Boot] [PATCH V13 02/14] devkit8000: add config for spl command
Stefano Babic
- [U-Boot] [PATCH V13 04/14] devkit8000/spl: init GPMC for dm9000 in SPL
Stefano Babic
- [U-Boot] [PATCH] sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option
Stefano Babic
- [U-Boot] [PATCH] configs: Remove CONFIG_NET_MULTI from board files
Stefano Babic
- [U-Boot] [PATCH v2] sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option
Stefano Babic
- [U-Boot] mx28evk_config integration
Stefano Babic
- [U-Boot] [PATCH 1/2] mmc: access mxcmmc from mx31 boards
Stefano Babic
- [U-Boot] [PATCH 2/2] tt01: add MMC support
Stefano Babic
- [U-Boot] [PATCH 1/2] SPI: Add i.MX ECSPI driver
Stefano Babic
- [U-Boot] mx28evk_config integration
Stefano Babic
- [U-Boot] [PATCH 4/5] net: fec_mxc: Nove autonegoatiate restart after mii_postcall
Stefano Babic
- [U-Boot] [PATCH v2] sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option
Stefano Babic
- [U-Boot] [PATCH V3 4/4] ARM: omap3: Added Teejet mt_ventoux
Stefano Babic
- [U-Boot] [PATCH V3 2/2] ARM: omap3: add support to Technexion twister board
Stefano Babic
- [U-Boot] [PATCH] configs: Remove CONFIG_NET_MULTI from board files
Stefano Babic
- [U-Boot] [PATCH V3 2/2] ARM: omap3: add support to Technexion twister board
Stefano Babic
- [U-Boot] [PATCH V3 2/2] ARM: omap3: add support to Technexion twister board
Stefano Babic
- [U-Boot] [PATCH] configs: Remove CONFIG_NET_MULTI from board files
Stefano Babic
- [U-Boot] [PATCH V13 04/14] devkit8000/spl: init GPMC for dm9000 in SPL
Stefano Babic
- [U-Boot] [PATCH] ARM: omap3: temporary disable USB on TAM3517 boards
Stefano Babic
- [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3
Stefano Babic
- [U-Boot] [PATCH 1/3] imximage: Add MX53 to the documentation
Stefano Babic
- [U-Boot] [PATCH 1/2] SPI: Add i.MX ECSPI driver
Stefano Babic
- [U-Boot] [PATCH 3/3] imximage: Sort bootops alphabetically
Stefano Babic
- [U-Boot] [PATCH 1/3] imximage: Add MX53 to the documentation
Stefano Babic
- [U-Boot] [PATCH 2/3] imximage: Add support for i.MX6
Stefano Babic
- [U-Boot] [PATCH] i.mx6q: configs: Add fdt_high and initrd_high variables
Stefano Babic
- [U-Boot] [PATCH] i.mx6q: mx6qsabrelite: Setup uart1 pinmux
Stefano Babic
- [U-Boot] [PATCH] i.mx6q: mx6qsabrelite: Add the ethernet function support
Stefano Babic
- [U-Boot] [PATCH 1/2] mmc: access mxcmmc from mx31 boards
Stefano Babic
- [U-Boot] [PATCH 1/2] fsl_pmic.h: add regulator mode 0 and 1 bits
Stefano Babic
- [U-Boot] [PATCH v2] configs: Remove CONFIG_NET_MULTI from board files
Stefano Babic
- [U-Boot] [PATCH] arm: Add Prep subcommand support to bootm
Stefano Babic
- [U-Boot] [PATCH] imx6: mx6qarm2: updated
Stefano Babic
- [U-Boot] [PATCH] imx6: mx6qarm2: updated
Stefano Babic
- [U-Boot] [PATCH V2] imx6: mx6qarm2: updated board_mmc_getcd() to the new prototype
Stefano Babic
- [U-Boot] [PATCH V2] imx6: mx6qarm2: updated board_mmc_getcd() to the new prototype
Stefano Babic
- [U-Boot] [PATCH 2/6] mx6q: Add support for ECSPI through mxc_spi driver
Stefano Babic
- [U-Boot] [PATCH V3] imx6: mx6qarm2: updated board_mmc_getcd() to the new prototype
Stefano Babic
- [U-Boot] [PATCH V3 2/2] tt01: add MMC support
Stefano Babic
- [U-Boot] [PATCH 2/6] mx6q: Add support for ECSPI through mxc_spi driver
Stefano Babic
- [U-Boot] [PATCH 2/6] mx6q: Add support for ECSPI through mxc_spi driver
Stefano Babic
- [U-Boot] [PATCH 6/6] mx6q: mx6qsabrelite: Provide defaults for placing environment in serial flash
Stefano Babic
- [U-Boot] [GIT PULL] Pull request: u-boot-imx
Stefano Babic
- [U-Boot] [PATCH] mx28: Show CPU frequency
Stefano Babic
- [U-Boot] [PATCH] mx28: Show CPU frequency
Stefano Babic
- [U-Boot] [PATCH] mx28: fix i.MX28 spi driver
Stefano Babic
- [U-Boot] USBTTY for CONFIG_USB_GADGET
Stefano Babic
- [U-Boot] [PATCH V2 3/6] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform
Stefano Babic
- [U-Boot] [PATCH V2 4/6] sf command: allow default chip select through CONFIG_SPI_FLASH_CS
Stefano Babic
- [U-Boot] [PATCH V2 5/6] mx6q: mx6qsabrelite: Provide default chip-select for serial flash
Stefano Babic
- [U-Boot] [PATCH V2 1/6] mxc_spi: move machine specifics into CPU headers
Stefano Babic
- [U-Boot] [PATCH V2 2/6] mx6q: Add support for ECSPI through mxc_spi driver
Stefano Babic
- [U-Boot] [PATCH 00/28] Add link-local addressing support
Stefano Babic
- [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3
Stefano Babic
- [U-Boot] [PATCH 02/28] net: cosmetic: checkpatch compliance
Stefano Babic
- [U-Boot] SPL Linux Boot
Stefano Babic
- [U-Boot] [RFC] mx28: Fix reboot from the kernel
Stefano Babic
- [U-Boot] [PATCH 00/28] Add link-local addressing support
Stefano Babic
- [U-Boot] [RFC Patch] e1000: Fix PCI memory addressing and fix for receive data polling
Stefano Babic
- [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3
Stefano Babic
- [U-Boot] [PATCH V12 15/15] SPL: wrong prototype for omap_rev_string
Stefano Babic
- [U-Boot] [PATCH] mx28: fix i.MX28 spi driver
Stefano Babic
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Stefano Babic
- [U-Boot] [PATCH V4] tt01: add MMC support
Stefano Babic
- [U-Boot] [PATCH V3 1/2] mc13783.h: create and add regulator mode 0 and 1
Stefano Babic
- [U-Boot] SPL Linux Boot
Stefano Babic
- [U-Boot] [PATCH] i.mx: i.mx5: update imx_get_mac_from_fuse function
Stefano Babic
- [U-Boot] [PATCH 3/3] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform
Stefano Babic
- [U-Boot] [PATCH] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back
Philip Balister
- [U-Boot] OMAP3 performance regression in 2011.12
Philip Balister
- [U-Boot] Help with Cross-Compiling U-boot for PPC
Peter Barada
- [U-Boot] A Problem of u-boot on TI PandaBoard porting
Peter Barada
- [U-Boot] Question regarding NAND environment
Peter Barada
- [U-Boot] Question regarding NAND environment
Peter Barada
- [U-Boot] Question regarding NAND environment
Peter Barada
- [U-Boot] fdt patches for Tegra
Jerry Van Baren
- [U-Boot] [PATCH v4 02/20] fdt: Add functions to access phandles, arrays and bools
Jerry Van Baren
- [U-Boot] [PATCH v4 01/20] fdt: Tidy up a few fdtdec problems
Jerry Van Baren
- [U-Boot] [PATCH v3 2/2] fdt: Add tests for fdtdec
Jerry Van Baren
- [U-Boot] [PATCH v3 1/2] fdt: Add fdtdec_find_aliases() to deal with alias nodes
Jerry Van Baren
- [U-Boot] fdt patches for Tegra
Jerry Van Baren
- [U-Boot] [PATCH v4] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board
Dirk Behme
- [U-Boot] [PATCH] sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option
Dirk Behme
- [U-Boot] [PATCH] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back
Dirk Behme
- [U-Boot] [PATCH 1/3] imximage: Add MX53 to the documentation
Dirk Behme
- [U-Boot] [PATCH 2/3] imximage: Add support for i.MX6
Dirk Behme
- [U-Boot] [PATCH 3/3] imximage: Sort bootops alphabetically
Dirk Behme
- [U-Boot] [PATCH 1/2] SPI: Add i.MX ECSPI driver
Dirk Behme
- [U-Boot] [PATCH 2/2] i.mx6q: SabreLite: Add SPI NOR support
Dirk Behme
- [U-Boot] [PATCH 2/2] i.mx6q: SabreLite: Add SPI NOR support
Dirk Behme
- [U-Boot] [PATCH 1/2] SPI: Add i.MX ECSPI driver
Dirk Behme
- [U-Boot] [PATCH] i.mx6q: mx6qsabrelite: Add the ethernet function support
Dirk Behme
- [U-Boot] [PATCH] i.mx6: mx6x_pins: Fix uart txd definitions
Dirk Behme
- [U-Boot] [PATCH] i.mx6q: configs: Add fdt_high and initrd_high variables
Dirk Behme
- [U-Boot] [PATCH] i.mx6q: mx6qsabrelite: Setup uart1 pinmux
Dirk Behme
- [U-Boot] [PATCH 1/2] SPI: Add i.MX ECSPI driver
Dirk Behme
- [U-Boot] [PATCH 1/5] net: fec_mxc: Add 1000 Mbps selection
Dirk Behme
- [U-Boot] [PATCH 2/5] net: fec_mxc: Increase autonegotiation timeout
Dirk Behme
- [U-Boot] [PATCH 3/5] miiphyutil: Add Micrel KSZ9021 support to miiphy_speed
Dirk Behme
- [U-Boot] [PATCH 4/5] net: fec_mxc: Nove autonegoatiate restart after mii_postcall
Dirk Behme
- [U-Boot] [PATCH 5/5] i.mx6q: mx6qsabrelite: Update the network configuration
Dirk Behme
- [U-Boot] [PATCH 1/3] imximage: Add MX53 to the documentation
Dirk Behme
- [U-Boot] [PATCH] imx6: mx6qarm2: updated
Dirk Behme
- [U-Boot] [PATCH] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back
Dirk Behme
- [U-Boot] mxc_spi refactoring (for mx6q)
Dirk Behme
- [U-Boot] [PATCH v2] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back
Dirk Behme
- [U-Boot] [PATCH v3] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board
Dirk Behme
- [U-Boot] [PATCH 3/5] miiphyutil: Add Micrel KSZ9021 support to miiphy_speed
Dirk Behme
- [U-Boot] [PATCH 3/5] miiphyutil: Add Micrel KSZ9021 support to miiphy_speed
Dirk Behme
- [U-Boot] [PATCH 3/5] miiphyutil: Add Micrel KSZ9021 support to miiphy_speed
Dirk Behme
- [U-Boot] [PATCH 6/6] mx6q: mx6qsabrelite: Provide defaults for placing environment in serial flash
Dirk Behme
- [U-Boot] [PATCH v2] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back
Dirk Behme
- [U-Boot] [PATCH 1/4] net: fec_mxc: add 1000 Mbps selection
Dirk Behme
- [U-Boot] [PATCH V4 6/7] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select
Dirk Behme
- [U-Boot] [PATCH 0/2] SPI flash enhancements: allow default bus and chip-selects
Dirk Behme
- [U-Boot] [PATCH] Change kernel address in dataflash to match u-boot's size
Alexandre Belloni
- [U-Boot] [PATCH] Change kernel address in dataflash to match u-boot's size
Alexandre Belloni
- [U-Boot] [PATCH v2] Change kernel address in dataflash to match u-boot's size
Alexandre Belloni
- [U-Boot] [PATCH 1/3] USB: Armada100: Add UTMI PHY interface driver
Ajay Bhargav
- [U-Boot] [PATCH 2/3] USB: Armada100: ECHI Driver for Armada100 SOCs
Ajay Bhargav
- [U-Boot] [PATCH 3/3] Armada100: gplugD: Add USB command support
Ajay Bhargav
- [U-Boot] [PATCH 2/3] USB: Armada100: ECHI Driver for Armada100 SOCs
Ajay Bhargav
- [U-Boot] [PATCH 1/3] USB: Armada100: Add UTMI PHY interface driver
Ajay Bhargav
- [U-Boot] [PATCH 3/3] Armada100: gplugD: Add USB command support
Ajay Bhargav
- [U-Boot] [PATCH 1/3] USB: Armada100: Add UTMI PHY interface driver
Ajay Bhargav
- [U-Boot] [PATCH V12 02/14] devki8000: add config for spl command
Andreas Bießmann
- [U-Boot] [PATCH V3] ARM: fix s3c2410 timer code
Andreas Bießmann
- [U-Boot] [RFC PATCH 01/19] Introduce generic global_data
Andreas Bießmann
- [U-Boot] [PATCH] tools/env: allow overwrite of ethaddr on default
Andreas Bießmann
- [U-Boot] [PATCH v4] tools/env: add posibility to inject configuration
Andreas Bießmann
- [U-Boot] [PATCH] omap: mmc: Raise timeout value to 20ms
Peter Bigot
- [U-Boot] [PATCH] omap: mmc: Raise timeout value to 20ms
Peter Bigot
- [U-Boot] [PATCH] omap: mmc: Raise timeout value to 20ms
Peter Bigot
- [U-Boot] [PATCH] omap: mmc: Raise timeout value to 20ms
Peter Bigot
- [U-Boot] User Question
Bishop, Mark
- [U-Boot] SMSC 9215 MII mode
Bishop, Mark
- [U-Boot] [PATCH] eth: remove usb-ethernet devices before re-enumerating them
Remy Bohmer
- [U-Boot] [PATCH] USB: relax usbcore reset timings
Remy Bohmer
- [U-Boot] [PATCH] USB: fix USB keyboard polling parameter
Remy Bohmer
- [U-Boot] [PATCH] usb: add numeric keypad support to HID driver
Remy Bohmer
- [U-Boot] [PATCH v4 14/20] usb: Add support for txfifo threshold
Remy Bohmer
- [U-Boot] [PATCH] USB: reevaluate iomux stdin on USB kbd detect
Remy Bohmer
- [U-Boot] [PATCH] USB: move keyboard polling into kbd driver
Remy Bohmer
- [U-Boot] [PATCH v4 16/20] tegra: usb: Add support for Tegra USB peripheral
Remy Bohmer
- [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3
Remy Bohmer
- [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding
Mitch Bradley
- [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding
Mitch Bradley
- [U-Boot] [PATCH] cmd_nand: add biterror insertion command for NAND Flash
Holger Brunck
- [U-Boot] [PATCH] cmd_nand: add biterror insertion command for NAND Flash
Holger Brunck
- [U-Boot] Bug#655102: v2011.12 and later do not boot on dreamplug.
Holger Brunck
- [U-Boot] Secure update of uboot devices?
Andreas Bäck
- [U-Boot] v2011.12 and later do not boot on dreamplug.
Ian Campbell
- [U-Boot] v2011.12 and later do not boot on dreamplug.
Ian Campbell
- [U-Boot] v2011.12 and later do not boot on dreamplug.
Ian Campbell
- [U-Boot] v2011.12 and later do not boot on dreamplug.
Ian Campbell
- [U-Boot] [PATCH] kirkwood_spi: correct access to irq_mask register
Ian Campbell
- [U-Boot] [PATCH] kirkwood_spi: correct access to irq_mask register
Ian Campbell
- [U-Boot] [PATCH] kirkwood_spi: correct access to irq_mask register
Ian Campbell
- [U-Boot] [RFC] [PATCH] DaVinci/i2c: allow multiple buses
Jérôme Carretero
- [U-Boot] Help needed on Colibri T20 - Iris Board
Stéphane Carvalho
- [U-Boot] Help needed on Colibri T20 - Iris Board
Stéphane Carvalho
- [U-Boot] u-boot script "test"
James Chargin
- [U-Boot] [PATCH] net: move bootfile/ipaddr init into eth_initialize
Thomas Chou
- [U-Boot] [PATCH 3/3] mtd/nand : workaround for Freescale FCM to support large-page Nand chip
Matthew L. Creech
- [U-Boot] [PATCH 3/3] mtd/nand : workaround for Freescale FCM to support large-page Nand chip
Matthew L. Creech
- [U-Boot] [PATCH 3/3] mtd/nand : workaround for Freescale FCM to support large-page Nand chip
Matthew L. Creech
- [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding
Colin Cross
- [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding
Colin Cross
- [U-Boot] [PATCH] Add support for MMC to fw_printenv/setenv
Christian Daudt
- [U-Boot] [PATCH v2] Add support for MMC to fw_printenv/setenv
Christian Daudt
- [U-Boot] [PATCH] OMAP SPL: Fix missing timer_init() call in OMAP4 s_init()
Nicolas Dechesne
- [U-Boot] Parameter restriction in mxsboot tool
Robert Deliën
- [U-Boot] Possible Denx m28evk ethernet problem + solution
Robert Deliën
- [U-Boot] Possible Denx m28evk ethernet problem + solution
Robert Deliën
- [U-Boot] Possible Denx m28evk ethernet problem + solution
Robert Deliën
- [U-Boot] Possible Denx m28evk ethernet problem + solution
Robert Deliën
- [U-Boot] Possible Denx m28evk ethernet problem + solution
Robert Deliën
- [U-Boot] u-boot-imx on Freescale MX28EVK
Robert Deliën
- [U-Boot] mx28evk_config integration
Robert Deliën
- [U-Boot] mx28evk_config integration
Robert Deliën
- [U-Boot] u-boot-imx on Freescale MX28EVK
Robert Deliën
- [U-Boot] mx28evk_config integration
Robert Deliën
- [U-Boot] mx28evk_config integration
Robert Deliën
- [U-Boot] mx28evk_config integration
Robert Deliën
- [U-Boot] mx28 spl power cpu clock configuration
Robert Deliën
- [U-Boot] mx28 spl power cpu clock configuration
Robert Deliën
- [U-Boot] mx28 spl power cpu clock configuration
Robert Deliën
- [U-Boot] mx28 spl power cpu clock configuration
Robert Deliën
- [U-Boot] mx28 spl power cpu clock configuration
Robert Deliën
- [U-Boot] mx28 spl power cpu clock configuration
Robert Deliën
- [U-Boot] mx28 spl power cpu clock configuration
Robert Deliën
- [U-Boot] [PATCH] i.MX28: Fix VDDIO and VDDA setup
Robert Deliën
- [U-Boot] [PATCH] i.MX28: Fix VDDIO and VDDA setup
Robert Deliën
- [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it
Wolfgang Denk
- [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it
Wolfgang Denk
- [U-Boot] Secure update of uboot devices?
Wolfgang Denk
- [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it
Wolfgang Denk
- [U-Boot] initcall revisited - A new idea to discuss
Wolfgang Denk
- [U-Boot] [PATCH] lsxl: add support for lschlv2 and lsxhl
Wolfgang Denk
- [U-Boot] [PATCH] lsxl: add support for lschlv2 and lsxhl
Wolfgang Denk
- [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it
Wolfgang Denk
- [U-Boot] [PATCH v3 3/3] ARM:AM33XX: Add SPL support for AM335X EVM
Wolfgang Denk
- [U-Boot] initcall revisited - A new idea to discuss
Wolfgang Denk
- [U-Boot] [PATCH] lsxl: add support for lschlv2 and lsxhl
Wolfgang Denk
- [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it
Wolfgang Denk
- [U-Boot] initcall revisited - A new idea to discuss
Wolfgang Denk
- [U-Boot] [PATCH] arm/omap3: limit chip select iteration based on board config
Wolfgang Denk
- [U-Boot] [PATCH] ARMV7: Add support for TRATS board
Wolfgang Denk
- [U-Boot] [PATCH 4/6] EEYNOS: Add SMDK5250 board support
Wolfgang Denk
- [U-Boot] [PATCH] ARMV7: Add support for TRATS board
Wolfgang Denk
- [U-Boot] [PATCH v2 3/6] cm-t35: add EEPROM module and pass Linux a serial number
Wolfgang Denk
- [U-Boot] [PATCH] doc: Add Tom Rini to git-mailrc
Wolfgang Denk
- [U-Boot] [PATCH] fat: reset VFAT short alias checksum on first match
Wolfgang Denk
- [U-Boot] tools/env/fw_env.h comment/code mismatch
Wolfgang Denk
- [U-Boot] [PATCH] fw_env.h: added a few missing defines
Wolfgang Denk
- [U-Boot] [PATCH] common/image.c: align usage of fdt_high with initrd_high
Wolfgang Denk
- [U-Boot] [PATCH] phy: add phy_smsc_init() declaration
Wolfgang Denk
- [U-Boot] [PATCH] fw_env.c: use default env values if config file cannot be opened
Wolfgang Denk
- [U-Boot] [PATCH 1/4] fpga: add definition for Xilinx Spartan-6 XC6SLX4
Wolfgang Denk
- [U-Boot] [PATCH 2/4] FPGA: use debug() instead of module debug printf
Wolfgang Denk
- [U-Boot] [PATCH 3/4] fpga: Spartan-3: let print the progress if configured
Wolfgang Denk
- [U-Boot] [PATCH 4/4] ARM: omap3: Added Teejet mt_ventoux
Wolfgang Denk
- [U-Boot] [PATCH V3 1/2] ext4fs ls load support
Wolfgang Denk
- [U-Boot] [PATCH V3 2/2] ext4fs write support
Wolfgang Denk
- [U-Boot] [PATCH V3 1/2] ext4fs ls load support
Wolfgang Denk
- [U-Boot] [PATCH] env: factor out the env_get_char_spec() function
Wolfgang Denk
- [U-Boot] [PATCH] [trivial] common.h: remove value from bool defines
Wolfgang Denk
- [U-Boot] [PATCH] [trivial] env: remove value from boolean defines
Wolfgang Denk
- [U-Boot] [PATCH] tools/mkenvimage.c: Fix a merge issue
Wolfgang Denk
- [U-Boot] [PATCH 1/2] tegra2: Always build with USE_PRIVATE_LIBGCC=yes.
Wolfgang Denk
- [U-Boot] Pull request: u-boot-arm/master
Wolfgang Denk
- [U-Boot] [PATCH] tools/env: allow overwrite of ethaddr on default
Wolfgang Denk
- [U-Boot] [PATCH v7] net: ll_temac: Add LL TEMAC driver to u-boot
Wolfgang Denk
- [U-Boot] [PATCH] ext2: Cache line align indirection buffers
Wolfgang Denk
- [U-Boot] [PATCH v2 1/3] fs/fat: Fix FAT detection to support non-DOS partition tables
Wolfgang Denk
- [U-Boot] [PATCH v2 2/3] fs/fat: Improve error handling
Wolfgang Denk
- [U-Boot] [PATCH v2 3/3] usb_storage: Fix EHCI "out of buffer pointers" with CD-ROM
Wolfgang Denk
- [U-Boot] [PATCH] avoid flash writes for new keys, with no values with fw_setenv
Wolfgang Denk
- [U-Boot] [PATCH] FAT: update the second FAT when writing a file
Wolfgang Denk
- [U-Boot] [PATCH v3] cmd_fat: add FAT write command
Wolfgang Denk
- [U-Boot] [PATCH 09/10] Correctly handle input files beginning with several newlines
Wolfgang Denk
- [U-Boot] [PATCHv2 03/10] mkenvimage: Correct the includes and add a missing one
Wolfgang Denk
- [U-Boot] [PATCH v3 1/2] net: add Calxeda xgmac driver
Wolfgang Denk
- [U-Boot] [PATCH v3 2/2] ARM: highbank: enable networking and pxe
Wolfgang Denk
- [U-Boot] [PATCH v2 1/3] fs/fat: Fix FAT detection to support non-DOS partition tables
Wolfgang Denk
- [U-Boot] [PATCH 1/2] tegra2: Always build with USE_PRIVATE_LIBGCC=yes.
Wolfgang Denk
- [U-Boot] [PATCH 1/2] tegra2: Always build with USE_PRIVATE_LIBGCC=yes.
Wolfgang Denk
- [U-Boot] [PATCH v7] net: ll_temac: Add LL TEMAC driver to u-boot
Wolfgang Denk
- [U-Boot] [PATCH] [trivial] common.h: remove value from bool defines
Wolfgang Denk
- [U-Boot] [PATCH] Fix logic for selection of CONFIG_SYS_DEF_EEPROM_ADDR
Wolfgang Denk
- [U-Boot] [PATCH 1/2] tegra2: Always build with USE_PRIVATE_LIBGCC=yes.
Wolfgang Denk
- [U-Boot] [PATCH 1/2] tegra2: Always build with USE_PRIVATE_LIBGCC=yes.
Wolfgang Denk
- [U-Boot] [PATCH] lib/string: added strndup
Wolfgang Denk
- [U-Boot] [PATCH 0/9] Fix a few warnings that bug me
Wolfgang Denk
- [U-Boot] initcall revisited - A new idea to discuss
Wolfgang Denk
- [U-Boot] initcall revisited - A new idea to discuss
Wolfgang Denk
- [U-Boot] [PATCH 2/9] Fix strict-aliasing warning in dlmalloc
Wolfgang Denk
- [U-Boot] Regarding HUSH support in uboot
Wolfgang Denk
- [U-Boot] stuck after redirecting stdout to nc
Wolfgang Denk
- [U-Boot] [PATCH] Revert "common.h: remove value from bool defines"
Wolfgang Denk
- [U-Boot] [PATCH] Revert "common.h: remove value from bool defines"
Wolfgang Denk
- [U-Boot] stuck after redirecting stdout to nc
Wolfgang Denk
- [U-Boot] Regarding HUSH support in uboot
Wolfgang Denk
- [U-Boot] Secure update of uboot devices?
Wolfgang Denk
- [U-Boot] [PATCH V2] ARMV7: Add support for TRATS board
Wolfgang Denk
- [U-Boot] [PATCH 2/9] Fix strict-aliasing warning in dlmalloc
Wolfgang Denk
- [U-Boot] [PATCH V2] ARMV7: Add support for TRATS board
Wolfgang Denk
- [U-Boot] [PATCH V2] ARMV7: Add support for TRATS board
Wolfgang Denk
- [U-Boot] [PATCH v2 0/4] Add SMDK5250 board support
Wolfgang Denk
- [U-Boot] [PATCH 1/2] config: Add CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE
Wolfgang Denk
- [U-Boot] [PATCH 1/2] config: Add CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE
Wolfgang Denk
- [U-Boot] [PATCH 2/2] bootm: Move silencing of linux console to deprecated config option.
Wolfgang Denk
- [U-Boot] [PATCH 0/2] Deprecate Linux bootargs munging with CONFIG_SILENT_CONSOLE.
Wolfgang Denk
- [U-Boot] [PATCH v2] bootm: Avoid 256-byte overflow in fixup_silent_linux()
Wolfgang Denk
- [U-Boot] [PATCH v2 0/2] Deprecate Linux bootargs munging with CONFIG_SILENT_CONSOLE.
Wolfgang Denk
- [U-Boot] [PATCH v2 2/2] bootm: Move silencing of linux console to deprecated config option.
Wolfgang Denk
- [U-Boot] [PATCH v2 1/2] config: Add CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE
Wolfgang Denk
- [U-Boot] [PATCH 0/2] Deprecate Linux bootargs munging with CONFIG_SILENT_CONSOLE.
Wolfgang Denk
- [U-Boot] [PATCH v2 0/2] Deprecate Linux bootargs munging with CONFIG_SILENT_CONSOLE.
Wolfgang Denk
- [U-Boot] [PATCH 6/8] powerpc/boot: Slave uploads ucode when boot from SRIO
Wolfgang Denk
- [U-Boot] [PATCH 5/8] powerpc/boot: Slave module for boot from SRIO
Wolfgang Denk
- [U-Boot] [PATCH 4/8] powerpc/boot: Master module for boot from SRIO
Wolfgang Denk
- [U-Boot] [PATCH 2/8] powerpc/env: Correct the compilation errors when defined CONFIG_ENV_IS_NOWHERE
Wolfgang Denk
- [U-Boot] [PATCH 1/8] powerpc/srio: Correct the register defined errors in the struct ccsr_rio_t
Wolfgang Denk
- [U-Boot] [PATCH v3 3/3] config: Remove Blackfin CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE
Wolfgang Denk
- [U-Boot] [PATCH v7] net: ll_temac: Add LL TEMAC driver to u-boot
Wolfgang Denk
- [U-Boot] Help needed on Colibri T20 - Iris Board
Wolfgang Denk
- [U-Boot] u-boot-imx on Freescale MX28EVK
Wolfgang Denk
- [U-Boot] bootm not taking dtb
Wolfgang Denk
- [U-Boot] bootm not taking dtb
Wolfgang Denk
- [U-Boot] [PATCH v3 3/4] EXYNOS: Add SMDK5250 board support
Wolfgang Denk
- [U-Boot] [PATCH] [v2] powerpc/85xx: move the Fman microcode from ef000000 to eff40000
Wolfgang Denk
- [U-Boot] Please pull u-boot-mmc.git
Wolfgang Denk
- [U-Boot] [GIT PULL] Please pull u-boot-mpc83xx: new 8321 tuge1, GPIO support, fixes
Wolfgang Denk
- [U-Boot] Please pull u-boot-ppc4xx
Wolfgang Denk
- [U-Boot] [GIT PULL] Pull request: i2c
Wolfgang Denk
- [U-Boot] [PATCH] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back
Wolfgang Denk
- [U-Boot] [PATCH v2 4/9] Stop using builtin_run_command()
Wolfgang Denk
- [U-Boot] Please pull u-boot-staging/sr at denx.de - UPDATE
Wolfgang Denk
- [U-Boot] compile the u-boot
Wolfgang Denk
- [U-Boot] [GIT PULL] please pull u-boot-mpc85xx
Wolfgang Denk
- [U-Boot] [PATCH] post/Makefile: Only build FP post tests if enabled via CONFIG_SYS_POST_FPU
Wolfgang Denk
- [U-Boot] [PATCH 1/9] Strip mkenvimage
Wolfgang Denk
- [U-Boot] [PATCH 0/9] mkenvimage: v10/v11 diff split into several patches
Wolfgang Denk
- [U-Boot] [PATCH v2 1/9] openrisc: Add architecture header files
Wolfgang Denk
- [U-Boot] [PATCH v2 2/9] openrisc: Add architecture image support
Wolfgang Denk
- [U-Boot] [PATCH v2 3/9] openrisc: Add cpu files
Wolfgang Denk
- [U-Boot] [PATCH v2 4/9] openrisc: Add library functions
Wolfgang Denk
- [U-Boot] [PATCH v2 5/9] openrisc: Add board info printout to cmd_bdinfo
Wolfgang Denk
- [U-Boot] [PATCH v2 6/9] openrisc: Add support for standalone programs
Wolfgang Denk
- [U-Boot] [PATCH v2 7/9] openrisc: Add openrisc-generic example board
Wolfgang Denk
- [U-Boot] [PATCH v2 8/9] openrisc: Add architecture to MAKEALL
Wolfgang Denk
- [U-Boot] [PATCH v2 9/9] openrisc: Add MAINTAINERS entry
Wolfgang Denk
- [U-Boot] [PATCH v2] net: allow setting env enetaddr from net device setting
Wolfgang Denk
- [U-Boot] Fwd: [PATCH v6 1/2] Introduce generic TPM support in u-boot
Wolfgang Denk
- [U-Boot] [PATCH v2 4/9] Stop using builtin_run_command()
Wolfgang Denk
- [U-Boot] [PATCH] post/Makefile: Only build FP post tests if enabled via CONFIG_SYS_POST_FPU
Wolfgang Denk
- [U-Boot] Bug of NOR Flash CFI Driver
Wolfgang Denk
- [U-Boot] [PATCH V4 2/2] ext4fs write support
Wolfgang Denk
- [U-Boot] [PATCH] net: move bootfile/ipaddr init into eth_initialize
Wolfgang Denk
- [U-Boot] [PATCH] net: ll_temac: Remove useless memory erasing
Wolfgang Denk
- [U-Boot] [PATCH 1/5] net: ll_temac: Add LL TEMAC driver to u-boot
Wolfgang Denk
- [U-Boot] [PATCH 1/5] net: ll_temac: Add LL TEMAC driver to u-boot
Wolfgang Denk
- [U-Boot] [PATCH] common, image: introduce new uimage types
Wolfgang Denk
- [U-Boot] [PATCH] ARM: omap3: temporary disable USB on TAM3517 boards
Wolfgang Denk
- [U-Boot] [PATCH] net: move bootfile/ipaddr init into eth_initialize
Wolfgang Denk
- [U-Boot] [PATCH] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back
Wolfgang Denk
- [U-Boot] [PATCH] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back
Wolfgang Denk
- [U-Boot] Pull request: u-boot-arm/master
Wolfgang Denk
- [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support
Wolfgang Denk
- [U-Boot] [PATCH] README: update (C) entry
Wolfgang Denk
- [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support
Wolfgang Denk
- [U-Boot] [U-Boot-Users]
Wolfgang Denk
- [U-Boot] device tree compilation problems.
Wolfgang Denk
- [U-Boot] About mtest on boot
Wolfgang Denk
- [U-Boot] Toradex Colibri, PXA-270 (ARM)
Wolfgang Denk
- [U-Boot] About mtest on boot
Wolfgang Denk
- [U-Boot] u-boot script "test"
Wolfgang Denk
- [U-Boot] bootelf command for Pandaboard
Wolfgang Denk
- [U-Boot] u-boot-atmel support for SMSC9514
Wolfgang Denk
- [U-Boot] SPL Framework: Add support for U_BOOT_CMD
Wolfgang Denk
- [U-Boot] U-Boot for EVAL-SPEAR1310-CPU
Wolfgang Denk
- [U-Boot] [PATCH 1/3] USB: Armada100: Add UTMI PHY interface driver
Wolfgang Denk
- [U-Boot] [PATCH 2/6] microblaze: Enable several ethernet driver compilation
Wolfgang Denk
- [U-Boot] Memory testing of flash
Wolfgang Denk
- [U-Boot] Memory testing of flash
Wolfgang Denk
- [U-Boot] Bug of NOR Flash CFI Driver
Robert Ding
- [U-Boot] [PATCH] ppc4xx: Setup HICB on Io64
Dirk Eibach
- [U-Boot] [PATCH] * Fix: watchdog timed out, if flash blank (0xFF) blocks
Jens Scharsig (BuS Elektronik)
- [U-Boot] [PATCH] arm/omap3: limit chip select iteration based on board config
Grant Erickson
- [U-Boot] [PATCH] arm/omap3: limit chip select iteration based on board config
Grant Erickson
- [U-Boot] [PATCH] tools/env: fix cross-compilation
Grant Erickson
- [U-Boot] [GIT PULL] Pull request: u-boot-imx
Fabio Estevam
- [U-Boot] Possible Denx m28evk ethernet problem + solution
Fabio Estevam
- [U-Boot] [PATCH] M28EVK: Fix build if CONFIG_CMD_NAND not selected
Fabio Estevam
- [U-Boot] [PATCH] sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option
Fabio Estevam
- [U-Boot] [PATCH 1/3] m28evk: Remove CONFIG_NET_MULTI option
Fabio Estevam
- [U-Boot] [PATCH 2/3] efika0: Remove CONFIG_NET_MULTI option
Fabio Estevam
- [U-Boot] [PATCH 3/3] flea3: Remove CONFIG_NET_MULTI option
Fabio Estevam
- [U-Boot] [PATCH v2 2/3] efika: Remove CONFIG_NET_MULTI option
Fabio Estevam
- [U-Boot] [PATCH 1/3] m28evk: Remove CONFIG_NET_MULTI option
Fabio Estevam
- [U-Boot] [PATCH 1/3] linkage.h: move from blackfin to common includes
Fabio Estevam
- [U-Boot] [PATCH] configs: Remove CONFIG_NET_MULTI from board files
Fabio Estevam
- [U-Boot] u-boot-imx on Freescale MX28EVK
Fabio Estevam
- [U-Boot] u-boot-imx on Freescale MX28EVK
Fabio Estevam
- [U-Boot] [PATCH v2] sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option
Fabio Estevam
- [U-Boot] u-boot-imx on Freescale MX28EVK
Fabio Estevam
- [U-Boot] [PATCH 2/2] i.mx6q: SabreLite: Add SPI NOR support
Fabio Estevam
- [U-Boot] [PATCH 1/2] SPI: Add i.MX ECSPI driver
Fabio Estevam
- [U-Boot] [PATCH 2/2] i.mx6q: SabreLite: Add SPI NOR support
Fabio Estevam
- [U-Boot] mx28evk_config integration
Fabio Estevam
- [U-Boot] mx28evk_config integration
Fabio Estevam
- [U-Boot] [PATCH] mx28: fix i.MX28 spi driver
Fabio Estevam
- [U-Boot] [PATCH] mx28: fix i.MX28 spi driver
Fabio Estevam
- [U-Boot] [PATCH] mx28: fix i.MX28 spi driver
Fabio Estevam
- [U-Boot] [PATCH] mx28: fix i.MX28 spi driver
Fabio Estevam
- [U-Boot] [PATCH v2] configs: Remove CONFIG_NET_MULTI from board files
Fabio Estevam
- [U-Boot] [PATCH] mx28: fix i.MX28 spi driver
Fabio Estevam
- [U-Boot] [PATCH] imx6: mx6qarm2: updated
Fabio Estevam
- [U-Boot] [PATCH] mx28: fix i.MX28 spi driver
Fabio Estevam
- [U-Boot] [PATCH 1/3] mx28evk: add RTC support
Fabio Estevam
- [U-Boot] [PATCH] mx28: Show CPU frequency
Fabio Estevam
- [U-Boot] [PATCH] mx28: Show CPU frequency
Fabio Estevam
- [U-Boot] [PATCH V2 0/6] mxc_spi refactoring (for mx6q and mx6qsabrelite)
Fabio Estevam
- [U-Boot] [PATCH] mx28: fix i.MX28 spi driver
Fabio Estevam
- [U-Boot] [PATCH 1/3] mx28evk: add RTC support
Fabio Estevam
- [U-Boot] [PATCH/RFC] mx28: print bootmode with cpuinfo
Fabio Estevam
- [U-Boot] [PATCH 3/3] mx28evk: add SPI support
Fabio Estevam
- [U-Boot] [PATCH/RFC] mx28: print bootmode with cpuinfo
Fabio Estevam
- [U-Boot] [RFC] mx28: Fix reboot from the kernel
Fabio Estevam
- [U-Boot] [PATCH V3 4/6] sf command: allow default chip select through CONFIG_SPI_FLASH_CS
Fabio Estevam
- [U-Boot] [RFC] mx28: Fix reboot from the kernel
Fabio Estevam
- [U-Boot] [RFC] mx28: Fix reboot from the kernel
Fabio Estevam
- [U-Boot] mx28 spl power cpu clock configuration
Fabio Estevam
- [U-Boot] mx28 spl power cpu clock configuration
Fabio Estevam
- [U-Boot] [PATCH] mx28: fix i.MX28 spi driver
Fabio Estevam
- [U-Boot] [PATCH 2/3] mx28evk: add USB support
Fabio Estevam
- [U-Boot] [PATCH 2/3] mx28evk: add USB support
Fabio Estevam
- [U-Boot] mx28 spl power cpu clock configuration
Fabio Estevam
- [U-Boot] mx28 spl power cpu clock configuration
Fabio Estevam
- [U-Boot] [PATCH] i.mx: i.mx5: update imx_get_mac_from_fuse function
Fabio Estevam
- [U-Boot] [PATCH] i.MX28: Fix VDDIO and VDDA setup
Fabio Estevam
- [U-Boot] mx28: booting u-boot via USB
Fabio Estevam
- [U-Boot] Multi-os on OMAP4430 mp
Clemens Fischer
- [U-Boot] [PATCH v3 0/4] mmc: Implement central card-detection.
Andy Fleming
- [U-Boot] [PATCH] tegra: mmc: Support operation with dcache enabled
Andy Fleming
- [U-Boot] [PATCH] tegra: mmc: Support operation with dcache enabled
Andy Fleming
- [U-Boot] Please pull u-boot-mmc.git
Andy Fleming
- [U-Boot] [PATCH v3 0/4] mmc: Implement central card-detection.
Andy Fleming
- [U-Boot] [PATCH v4 0/4] mmc: Implement central card-detection.
Andy Fleming
- [U-Boot] [PATCH] fsl_esdhc: fix PIO mode transfers
Andy Fleming
- [U-Boot] [PATCH 1/4] net: fec_mxc: add 1000 Mbps selection
Andy Fleming
- [U-Boot] [PATCH 2/4] net: fec_mxc: add PHYLIB support
Andy Fleming
- [U-Boot] [PATCH 3/4] net: phy: add support for Micrel's KSZ9021
Andy Fleming
- [U-Boot] [PATCH 3/4] net: phy: add support for Micrel's KSZ9021
Andy Fleming
- [U-Boot] [PATCH] [trivial] env: remove value from boolean defines
Mike Frysinger
- [U-Boot] [PATCH] [trivial] common.h: remove value from bool defines
Mike Frysinger
- [U-Boot] AES128 in U-Boot
Mike Frysinger
- [U-Boot] Starting point of uboot learning from scratch..pls help<eom>
Mike Frysinger
- [U-Boot] Uboot build system question
Mike Frysinger
- [U-Boot] [PATCH v2 3/9] openrisc: Add cpu files
Mike Frysinger
- [U-Boot] [PATCH] tools/env: fix cross-compilation
Mike Frysinger
- [U-Boot] [PATCH] lib/string: added strndup
Mike Frysinger
- [U-Boot] stuck after redirecting stdout to nc
Mike Frysinger
- [U-Boot] [PATCH] Add support for MMC to fw_printenv/setenv
Mike Frysinger
- [U-Boot] [PATCH] lib/string: added strndup
Mike Frysinger
- [U-Boot] [PATCH v2] Add support for MMC to fw_printenv/setenv
Mike Frysinger
- [U-Boot] User Question
Mike Frysinger
- [U-Boot] [PATCH 15/16] New command bootmenu: ANSI terminal Boot Menu support
Mike Frysinger
- [U-Boot] Secure update of uboot devices?
Mike Frysinger
- [U-Boot] [PATCH v2 3/9] openrisc: Add cpu files
Mike Frysinger
- [U-Boot] [PATCH 05/15] common/main.c: Fix function readline
Mike Frysinger
- [U-Boot] [PATCH V3 2/2] ext4fs write support
Mike Frysinger
- [U-Boot] [PATCH V3 1/2] ext4fs ls load support
Mike Frysinger
- [U-Boot] [PATCH] Add a CBFS driver and commands to u-boot
Mike Frysinger
- [U-Boot] [PATCH 2/2] usb/gadget: add the fastboot gadget
Mike Frysinger
- [U-Boot] [PATCH] Remove execute permissions from source files
Mike Frysinger
- [U-Boot] [PATCH] x86: Set up the PCI busses when initializing the coreboot "board"
Mike Frysinger
- [U-Boot] [PATCH 2/4] dfu: generic backend parts
Mike Frysinger
- [U-Boot] [PATCH v3] Add 'patman' patch generation, checking and submission script
Mike Frysinger
- [U-Boot] [PATCH 3/4] x86: Force the lib_sysinfo structure to be in the .data section
Mike Frysinger
- [U-Boot] [PATCH 01/14] Add AES crypto library
Mike Frysinger
- [U-Boot] [PATCH 03/14] tegra: Add crypto library for warmboot code
Mike Frysinger
- [U-Boot] [PATCH 4/7] tegra: Add I2C driver
Mike Frysinger
- [U-Boot] [PATCHv2 1/8] Strip mkenvimage
Mike Frysinger
- [U-Boot] [PATCHv3 3/8] mkenvimage: Correct the includes and add a missing one
Mike Frysinger
- [U-Boot] [PATCHv2 4/8] mkenvimage: More error handling
Mike Frysinger
- [U-Boot] [PATCHv3 5/8] mkenvimage: Read/Write from/to stdin/out by default or if the filename is "-"
Mike Frysinger
- [U-Boot] [PATCHv2 6/8] mkenvimage: Use mmap() when reading from a regular file
Mike Frysinger
- [U-Boot] [PATCH] tools/env: fix cross-compilation
Mike Frysinger
- [U-Boot] [PATCH 2/2] api: storage: Share attributes with block_dev_desc
Mike Frysinger
- [U-Boot] [RFC PATCH v2 02/15] bootstage: Make use of BOOTSTAGE_ID_RUN_OS in show_boot_progress()
Mike Frysinger
- [U-Boot] [RFC PATCH v2 01/15] bootstage: Create an initial header for boot progress integers
Mike Frysinger
- [U-Boot] [RFC PATCH v2 03/15] bootstage: Use show_boot_error() for -ve progress numbers
Mike Frysinger
- [U-Boot] [RFC PATCH v2 04/15] bootstage: Convert progress numbers 1-9 into enums
Mike Frysinger
- [U-Boot] [RFC PATCH v2 05/15] bootstage: Convert progress numbers 10-19 to enums
Mike Frysinger
- [U-Boot] [RFC PATCH v2 11/15] bootstage: Define an optional microsecond timer
Mike Frysinger
- [U-Boot] [RFC PATCH v2 13/15] bootstage: Add microsecond boot time measurement
Mike Frysinger
- [U-Boot] [RFC PATCH v2 15/15] bootstage: arm: Add bootstage calls in board and bootm
Mike Frysinger
- [U-Boot] [PATCH] tegra: mmc: Support operation with dcache enabled
Mike Frysinger
- [U-Boot] [PATCH v3 03/16] Add gpio_request() to asm-generic header
Mike Frysinger
- [U-Boot] [PATCH] sandbox: Add tap based networking
Mike Frysinger
- [U-Boot] [PATCH 5/9] sandbox: sort header files in os.c
Mike Frysinger
- [U-Boot] [PATCH 6/9] sandbox: Add required header to os.c
Mike Frysinger
- [U-Boot] [PATCH 01/14] Add AES crypto library
Mike Frysinger
- [U-Boot] [PATCH] lzma: fix printf warnings
Mike Frysinger
- [U-Boot] [PATCH] Blackfin: add in/out le32 variants
Mike Frysinger
- [U-Boot] [PATCH] post: add blackfin to the post_time_ms list
Mike Frysinger
- [U-Boot] [PATCH] Blackfin: br4: new board port
Mike Frysinger
- [U-Boot] [PATCH v2] Blackfin: pr1: new board port
Mike Frysinger
- [U-Boot] [PATCH v2] Blackfin: br4: new board port
Mike Frysinger
- [U-Boot] [PATCH 2/9] Fix strict-aliasing warning in dlmalloc
Mike Frysinger
- [U-Boot] [PATCH 9/9] ppc: Change memsz variable to signed char
Mike Frysinger
- [U-Boot] [PATCH 8/9] m68k: Change memsz to a signed char to avoid warning
Mike Frysinger
- [U-Boot] [PATCH 1/9] usb: Fix strict-aliasing warning in host/ohci-hcd.c
Mike Frysinger
- [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL
Mike Frysinger
- [U-Boot] [PATCHv4 3/8] mkenvimage: Correct an include and add a missing one
Mike Frysinger
- [U-Boot] [PATCHv3 4/8] mkenvimage: More error handling
Mike Frysinger
- [U-Boot] [PATCHv3 5/8] mkenvimage: Read/Write from/to stdin/out by default or if the filename is "-"
Mike Frysinger
- [U-Boot] [RFC PATCH v2 01/15] bootstage: Create an initial header for boot progress integers
Mike Frysinger
- [U-Boot] [RFC PATCH v2 11/15] bootstage: Define an optional microsecond timer
Mike Frysinger
- [U-Boot] [RFC PATCH v2 15/15] bootstage: arm: Add bootstage calls in board and bootm
Mike Frysinger
- [U-Boot] [PATCH 2/4] dfu: generic backend parts
Mike Frysinger
- [U-Boot] [RFC PATCH v2 15/15] bootstage: arm: Add bootstage calls in board and bootm
Mike Frysinger
- [U-Boot] [RFC PATCH v2 13/15] bootstage: Add microsecond boot time measurement
Mike Frysinger
- [U-Boot] [PATCH 1/2] Flush the date cache before disabling it.
Mike Frysinger
- [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL
Mike Frysinger
- [U-Boot] [PATCH v2 5/9] sandbox: sort header files in os.c
Mike Frysinger
- [U-Boot] [PATCH] da850evm: drop NET_MULTI reference
Mike Frysinger
- [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL
Mike Frysinger
- [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL
Mike Frysinger
- [U-Boot] [PATCH 2/2] bootm: Move silencing of linux console to deprecated config option.
Mike Frysinger
- [U-Boot] [PATCH 0/2] Deprecate Linux bootargs munging with CONFIG_SILENT_CONSOLE.
Mike Frysinger
- [U-Boot] [PATCH 0/2] Deprecate Linux bootargs munging with CONFIG_SILENT_CONSOLE.
Mike Frysinger
- [U-Boot] [PATCH v2 2/2] bootm: Move silencing of linux console to deprecated config option.
Mike Frysinger
- [U-Boot] [PATCH v2 1/2] config: Add CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE
Mike Frysinger
- [U-Boot] [PATCH v3 3/3] config: Remove Blackfin CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE
Mike Frysinger
- [U-Boot] [PATCH v2] bootm: Avoid 256-byte overflow in fixup_silent_linux()
Mike Frysinger
- [U-Boot] [PATCH v2] bootm: Avoid 256-byte overflow in fixup_silent_linux()
Mike Frysinger
- [U-Boot] [PATCH] cmd_source: introduce run_script()
Mike Frysinger
- [U-Boot] [PATCH v3 3/3] config: Remove Blackfin CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE
Mike Frysinger
- [U-Boot] [PATCH v3 5/9] sandbox: sort header files in os.c
Mike Frysinger
- [U-Boot] [PATCH v3 6/9] sandbox: Add required header to os.c
Mike Frysinger
- [U-Boot] [PATCH v3 3/3] config: Remove Blackfin CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE
Mike Frysinger
- [U-Boot] [PATCH v2] linkage.h: move from blackfin to common includes
Mike Frysinger
- [U-Boot] [PATCH 1/3] linkage.h: move from blackfin to common includes
Mike Frysinger
- [U-Boot] [PATCH] configs: Remove CONFIG_NET_MULTI from board files
Mike Frysinger
- [U-Boot] [PATCH 3/5] miiphyutil: Add Micrel KSZ9021 support to miiphy_speed
Mike Frysinger
- [U-Boot] [PATCH 1/2] SPI: Add i.MX ECSPI driver
Mike Frysinger
- [U-Boot] [PATCH 2/2] i.mx6q: SabreLite: Add SPI NOR support
Mike Frysinger
- [U-Boot] [PATCH 2/2] i.mx6q: SabreLite: Add SPI NOR support
Mike Frysinger
- [U-Boot] [RFC PATCH v2 13/15] bootstage: Add microsecond boot time measurement
Mike Frysinger
- [U-Boot] [PATCH] configs: Remove CONFIG_NET_MULTI from board files
Mike Frysinger
- [U-Boot] [RFC PATCH v2 13/15] bootstage: Add microsecond boot time measurement
Mike Frysinger
- [U-Boot] [PATCHv5 1/7] mkenvimage: correct and clarify comments and error messages
Mike Frysinger
- [U-Boot] [PATCHv5 2/7] mkenvimage: Correct an include and add a missing one
Mike Frysinger
- [U-Boot] [PATCHv5 3/7] mkenvimage: More error handling
Mike Frysinger
- [U-Boot] [PATCHv5 4/7] mkenvimage: Read/Write from/to stdin/out by default or if the filename is "-"
Mike Frysinger
- [U-Boot] [PATCHv5 5/7] mkenvimage: Use mmap() when reading from a regular file
Mike Frysinger
- [U-Boot] [PATCHv5 6/7] mkenvimage: Don't try to detect comments in the input file
Mike Frysinger
- [U-Boot] [PATCHv5 7/7] mkenvimage: Really set the redundant byte when applicable
Mike Frysinger
- [U-Boot] [PATCH v2] bootm: Avoid 256-byte overflow in fixup_silent_linux()
Mike Frysinger
- [U-Boot] [PATCH 04/17] tegra: Add display support to funcmux
Mike Frysinger
- [U-Boot] [PATCH 11/17] lcd: Add CONFIG_ALIGN_LCD_TO_SECTION to align lcd for MMU
Mike Frysinger
- [U-Boot] [PATCH 12/17] lcd: Add support for flushing LCD fb from dcache after update
Mike Frysinger
- [U-Boot] [PATCH 12/17] lcd: Add support for flushing LCD fb from dcache after update
Mike Frysinger
- [U-Boot] [PATCH 5/6] tegra: nand: Add Tegra NAND driver
Mike Frysinger
- [U-Boot] [PATCH v2 0/20] tegra: warmboot (suspend / resume) support
Mike Frysinger
- [U-Boot] [PATCH v2 20/20] tegra: Enable LP0 on Seaboard
Mike Frysinger
- [U-Boot] [PATCH 5/6] tegra: nand: Add Tegra NAND driver
Mike Frysinger
- [U-Boot] [PATCH v2 7/8] sandbox: Add flags for open() call
Mike Frysinger
- [U-Boot] [PATCH v2 7/8] sandbox: Add flags for open() call
Mike Frysinger
- [U-Boot] [PATCH 1/5] net: ll_temac: Add LL TEMAC driver to u-boot
Mike Frysinger
- [U-Boot] [PATCH] common, image: introduce new uimage types
Mike Frysinger
- [U-Boot] [PATCH 1/3] common: add possibility for readline_into_buffer timeout
Mike Frysinger
- [U-Boot] [PATCH 2/3] common, menu: add statusline support
Mike Frysinger
- [U-Boot] [PATCH 3/3] common, menu: show menu on startup if CONFIG_MENU_SHOW is defined
Mike Frysinger
- [U-Boot] [PATCH v2] configs: Remove CONFIG_NET_MULTI from board files
Mike Frysinger
- [U-Boot] [PATCH 1/5] net: ll_temac: Add LL TEMAC driver to u-boot
Mike Frysinger
- [U-Boot] [PATCH 2/2] nand/fsl_elbc: Convert to self-init
Mike Frysinger
- [U-Boot] [PATCH] net: move bootfile/ipaddr init into eth_initialize
Mike Frysinger
- [U-Boot] [PATCH] net: ll_temac: Remove useless memory erasing
Mike Frysinger
- [U-Boot] [PATCH V4 2/2] ext4fs write support
Mike Frysinger
- [U-Boot] Add ext4 write support
Mike Frysinger
- [U-Boot] [PATCH] add new board vl_ma2sc
Mike Frysinger
- [U-Boot] [PATCH] net: move bootfile/ipaddr init into eth_initialize
Mike Frysinger
- [U-Boot] [PATCH V4 2/2] ext4fs write support
Mike Frysinger
- [U-Boot] [PATCH 2/2] nand/fsl_elbc: Convert to self-init
Mike Frysinger
- [U-Boot] [PATCH] net: move bootfile/ipaddr init into eth_initialize
Mike Frysinger
- [U-Boot] [PATCH 2/2] nand/fsl_elbc: Convert to self-init
Mike Frysinger
- [U-Boot] [PATCH 1/2] net: punt bd->bi_ip_addr
Mike Frysinger
- [U-Boot] [PATCH 2/2] net: move bootfile init into eth_initialize
Mike Frysinger
- [U-Boot] [PATCH v3 1/9] fdt: Add fdtdec functions to read byte array
Mike Frysinger
- [U-Boot] [PATCH v3 1/9] fdt: Add fdtdec functions to read byte array
Mike Frysinger
- [U-Boot] [PATCH 1/3 v2] common: add possibility for readline_into_buffer timeout
Mike Frysinger
- [U-Boot] [PATCH 2/3 v2] common, menu: add statusline support
Mike Frysinger
- [U-Boot] [PATCH] common, menu: do not trigger timeout again, if a line is read
Mike Frysinger
- [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support
Mike Frysinger
- [U-Boot] [PATCH v3] bootm: Avoid 256-byte overflow in fixup_silent_linux()
Mike Frysinger
- [U-Boot] [PATCH v4] bootm: Avoid 256-byte overflow in fixup_silent_linux()
Mike Frysinger
- [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support
Mike Frysinger
- [U-Boot] [PATCH 3/5] miiphyutil: Add Micrel KSZ9021 support to miiphy_speed
Mike Frysinger
- [U-Boot] [PATCH 3/5] miiphyutil: Add Micrel KSZ9021 support to miiphy_speed
Mike Frysinger
- [U-Boot] [PATCH v2 1/8] sandbox: fdt: Add support for CONFIG_OF_CONTROL
Mike Frysinger
- [U-Boot] [PATCH v2 2/8] sandbox: config: Enable fdt and snprintf() options
Mike Frysinger
- [U-Boot] [PATCH v2 3/8] sandbox: gpio: Add basic driver for simulating GPIOs
Mike Frysinger
- [U-Boot] [PATCH v2 4/8] sandbox: Enable GPIO driver
Mike Frysinger
- [U-Boot] [PATCH v2 6/8] sandbox: Allow processing instead of or before main loop
Mike Frysinger
- [U-Boot] [PATCH v2 8/8] sandbox: Add basic command line parsing
Mike Frysinger
- [U-Boot] [PATCH] sandbox: add ifdef protection to os.h
Mike Frysinger
- [U-Boot] [PATCH 1/3] cmd_mem: replace custom PRINTF() with debug()
Mike Frysinger
- [U-Boot] [PATCH 2/3] cmd_mem: cmp: unify size code paths
Mike Frysinger
- [U-Boot] [PATCH 3/3] cmd_mem: cmp: convert while() to for() loop
Mike Frysinger
- [U-Boot] [PATCH 0/6] sandbox: spi/sf emulation
Mike Frysinger
- [U-Boot] [PATCH 1/6] sandbox: add lseek helper
Mike Frysinger
- [U-Boot] [PATCH 2/6] sandbox: add getopt support
Mike Frysinger
- [U-Boot] [PATCH 3/6] sandbox: SPI emulation bus
Mike Frysinger
- [U-Boot] [PATCH 4/6] sandbox: new SPI flash driver
Mike Frysinger
- [U-Boot] [PATCH 5/6] sandbox: enable new spi/sf layers
Mike Frysinger
- [U-Boot] [PATCH 6/6] sandbox: add getenv support
Mike Frysinger
- [U-Boot] [PATCH v2 1/8] sandbox: fdt: Add support for CONFIG_OF_CONTROL
Mike Frysinger
- [U-Boot] [PATCH] tools/env: allow overwrite of ethaddr on default
Mike Frysinger
- [U-Boot] [PATCH 3/6] sandbox: SPI emulation bus
Mike Frysinger
- [U-Boot] [PATCH 4/6] sandbox: new SPI flash driver
Mike Frysinger
- [U-Boot] [PATCH 6/6] sandbox: add getenv support
Mike Frysinger
- [U-Boot] [PATCH V3 4/6] sf command: allow default chip select through CONFIG_SPI_FLASH_CS
Mike Frysinger
- [U-Boot] [PATCH] SMDK5250: Add ethernet support
Mike Frysinger
- [U-Boot] [PATCH v2 2/8] sandbox: config: Enable fdt and snprintf() options
Mike Frysinger
- [U-Boot] [PATCH v2 3/8] sandbox: gpio: Add basic driver for simulating GPIOs
Mike Frysinger
- [U-Boot] [PATCH v2 8/8] sandbox: Add basic command line parsing
Mike Frysinger
- [U-Boot] [PATCH v3 7/8] sandbox: Add flags for open() call
Mike Frysinger
- [U-Boot] [PATCH v3 5/8] sandbox: Add concept of sandbox state
Mike Frysinger
- [U-Boot] [PATCH v2 3/8] sandbox: gpio: Add basic driver for simulating GPIOs
Mike Frysinger
- [U-Boot] [PATCH V3 4/6] sf command: allow default chip select through CONFIG_SPI_FLASH_CS
Mike Frysinger
- [U-Boot] [PATCH V3 4/6] sf command: allow default chip select through CONFIG_SPI_FLASH_CS
Mike Frysinger
- [U-Boot] [PATCH V3 4/6] sf command: allow default chip select through CONFIG_SPI_FLASH_CS
Mike Frysinger
- [U-Boot] [PATCH 3/4] net: phy: add support for Micrel's KSZ9021
Mike Frysinger
- [U-Boot] [PATCH 2/6] microblaze: Enable several ethernet driver compilation
Mike Frysinger
- [U-Boot] [PATCH 2/6] microblaze: Enable several ethernet driver compilation
Mike Frysinger
- [U-Boot] [PATCH V4 5/7] README: Add description of SPI Flash (SF) command configuration
Mike Frysinger
- [U-Boot] [PATCH V4 5/7] README: Add description of SPI Flash (SF) command configuration
Mike Frysinger
- [U-Boot] [PATCH V4 4/7] sf command: allow default bus and chip selects
Mike Frysinger
- [U-Boot] Can u-Boot Ran from RAM?
Mike Frysinger
- [U-Boot] [PATCH 0/2] SPI flash enhancements: allow default bus and chip-selects
Mike Frysinger
- [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects
Mike Frysinger
- [U-Boot] [PATCH 1/2] sf: eeprom_m95xxx: fix up style
Mike Frysinger
- [U-Boot] [PATCH 2/2] sf: eeprom_m95xxx: set a sane default timeout
Mike Frysinger
- [U-Boot] [PATCH 0/2] SPI flash enhancements: allow default bus and chip-selects
Mike Frysinger
- [U-Boot] [PATCH 1/2] sf: drop unused/duplicate command defines
Mike Frysinger
- [U-Boot] [PATCH 2/2] sf: spansion: inline useless id defines
Mike Frysinger
- [U-Boot] [PATCH 0/5 v2] sandbox: spi/sf emulation
Mike Frysinger
- [U-Boot] [PATCH 1/5 v2] sandbox: add lseek helper
Mike Frysinger
- [U-Boot] [PATCH 2/5 v2] sandbox: add getopt support
Mike Frysinger
- [U-Boot] [PATCH 3/5 v2] sandbox: SPI emulation bus
Mike Frysinger
- [U-Boot] [PATCH 4/5 v2] sandbox: new SPI flash driver
Mike Frysinger
- [U-Boot] [PATCH 5/5 v2] sandbox: enable new spi/sf layers
Mike Frysinger
- [U-Boot] u-boot-imx on Freescale MX28EVK
Matthias Fuchs
- [U-Boot] u-boot-imx on Freescale MX28EVK
Matthias Fuchs
- [U-Boot] u-boot-imx on Freescale MX28EVK
Matthias Fuchs
- [U-Boot] u-boot-imx on Freescale MX28EVK
Matthias Fuchs
- [U-Boot] u-boot-imx on Freescale MX28EVK
Matthias Fuchs
- [U-Boot] mx28: bug in mxs_spi driver
Matthias Fuchs
- [U-Boot] [PATCH] mx28: fix i.MX28 spi driver
Matthias Fuchs
- [U-Boot] [PATCH] mx28: fix i.MX28 spi driver
Matthias Fuchs
- [U-Boot] [PATCH] mx28: fix i.MX28 spi driver
Matthias Fuchs
- [U-Boot] [PATCH] mx28: fix i.MX28 spi driver
Matthias Fuchs
- [U-Boot] [PATCH] mx28: fix i.MX28 spi driver
Matthias Fuchs
- [U-Boot] SPI Test
Matthias Fuchs
- [U-Boot] [PATCH 1/3] mx28evk: add RTC support
Matthias Fuchs
- [U-Boot] [PATCH 2/3] mx28evk: add USB support
Matthias Fuchs
- [U-Boot] [PATCH 3/3] mx28evk: add SPI support
Matthias Fuchs
- [U-Boot] [PATCH/RFC] mx28: print bootmode with cpuinfo
Matthias Fuchs
- [U-Boot] [PATCH/RFC] mx28: print bootmode with cpuinfo
Matthias Fuchs
- [U-Boot] [PATCH 3/3] mx28evk: add SPI support
Matthias Fuchs
- [U-Boot] [PATCH/RFC] mx28: print bootmode with cpuinfo
Matthias Fuchs
- [U-Boot] [RFC] mx28: Fix reboot from the kernel
Matthias Fuchs
- [U-Boot] [PATCH V3 4/6] sf command: allow default chip select through CONFIG_SPI_FLASH_CS
Matthias Fuchs
- [U-Boot] [PATCH] i.MX28: Fix VDDIO and VDDA setup
Matthias Fuchs
- [U-Boot] [PATCH 1/2] sf command: allow default bus and chip selects
Matthias Fuchs
- [U-Boot] [PATCH] i.MX28: Fix VDDIO and VDDA setup
Matthias Fuchs
- [U-Boot] mx28: booting u-boot via USB
Matthias Fuchs
- [U-Boot] mx28: booting u-boot via USB
Matthias Fuchs
- [U-Boot] mx28: booting u-boot via USB
Matthias Fuchs
- [U-Boot] [PATCH] configs: Remove CONFIG_NET_MULTI from board files
Kumar Gala
- [U-Boot] [PATCH] sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option
Kumar Gala
- [U-Boot] [PATCH v2] sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option
Kumar Gala
- [U-Boot] [PATCH 1/8] powerpc/srio: Correct the register defined errors in the struct ccsr_rio_t
Kumar Gala
- [U-Boot] [PATCH] post/Makefile: Only build FP post tests if enabled via CONFIG_SYS_POST_FPU
Kumar Gala
- [U-Boot] [GIT PULL] please pull u-boot-mpc85xx
Kumar Gala
- [U-Boot] [GIT PULL] please pull u-boot-mpc85xx
Kumar Gala
- [U-Boot] [PATCH 2/2] eXMeritus HWW-1U-1A: Minor environment variable tweaks
Kumar Gala
- [U-Boot] [PATCH 1/2] eXMeritus HWW-1U-1A: Add support for the AT24C128N I2C EEPROM
Kumar Gala
- [U-Boot] [PATCH] MPC85xxCDS: Fix missing LCRR_DBYP bits for 66-133MHz LBC
Kumar Gala
- [U-Boot] [PATCH 85xx-next 0/8] Updates for Wind River sbc8548 board
Kumar Gala
- [U-Boot] [PATCH] fsl_lbc: add printout of LCRR and LBCR to local bus regs
Kumar Gala
- [U-Boot] [PATCH 1/8] powerpc/srio: Correct the register defined errors in the struct ccsr_rio_t
Liu Gang
- [U-Boot] [PATCH 2/8] powerpc/env: Correct the compilation errors when defined CONFIG_ENV_IS_NOWHERE
Liu Gang
- [U-Boot] [PATCH 3/8] powerpc/boot: Document for the boot from SRIO
Liu Gang
- [U-Boot] [PATCH 4/8] powerpc/boot: Master module for boot from SRIO
Liu Gang
- [U-Boot] [PATCH 5/8] powerpc/boot: Slave module for boot from SRIO
Liu Gang
- [U-Boot] [PATCH 6/8] powerpc/boot: Slave uploads ucode when boot from SRIO
Liu Gang
- [U-Boot] [PATCH 7/8] powerpc/boot: Slave reads ENV from master when boot from SRIO
Liu Gang
- [U-Boot] [PATCH 8/8] powerpc/boot: Slave core in holdoff when boot from SRIO
Liu Gang
- [U-Boot] [PATCH 5/8] powerpc/boot: Slave module for boot from SRIO
Liu Gang
- [U-Boot] [PATCH 4/8] powerpc/boot: Master module for boot from SRIO
Liu Gang
- [U-Boot] [PATCH 6/8] powerpc/boot: Slave uploads ucode when boot from SRIO
Liu Gang
- [U-Boot] [PATCH 1/8] powerpc/srio: Correct the register defined errors in the struct ccsr_rio_t
Liu Gang
- [U-Boot] [PATCH 1/8 v2] powerpc/srio: Rewrite the struct ccsr_rio
Liu Gang
- [U-Boot] [PATCH 2/8 v2] powerpc/corenet_ds: Correct the compilation errors about ENV
Liu Gang
- [U-Boot] [PATCH 3/8 v2] powerpc/corenet_ds: Document for the boot from SRIO
Liu Gang
- [U-Boot] [PATCH 4/8 v2] powerpc/corenet_ds: Master module for boot from SRIO
Liu Gang
- [U-Boot] [PATCH 5/8 v2] powerpc/corenet_ds: Slave module for boot from SRIO
Liu Gang
- [U-Boot] [PATCH 6/8 v2] powerpc/corenet_ds: Slave uploads ucode when boot from SRIO
Liu Gang
- [U-Boot] [PATCH 7/8 v2] powerpc/corenet_ds: Slave reads ENV from master when boot from SRIO
Liu Gang
- [U-Boot] [PATCH 8/8 v2] powerpc/corenet_ds: Slave core in holdoff when boot from SRIO
Liu Gang
- [U-Boot] [PATCH 2/8] powerpc/env: Correct the compilation errors when defined CONFIG_ENV_IS_NOWHERE
Liu Gang-B34182
- [U-Boot] [PATCH 6/8] powerpc/boot: Slave uploads ucode when boot from SRIO
Liu Gang-B34182
- [U-Boot] [PATCH 5/8] powerpc/boot: Slave module for boot from SRIO
Liu Gang-B34182
- [U-Boot] [PATCH 5/8] powerpc/boot: Slave module for boot from SRIO
Liu Gang-B34182
- [U-Boot] [PATCH 1/2] Flush the date cache before disabling it.
Sughosh Ganu
- [U-Boot] [PATCH 2/2] Changes to move hawkboard to the new infrastructure.
Sughosh Ganu
- [U-Boot] [PATCH 1/2] Flush the date cache before disabling it.
Sughosh Ganu
- [U-Boot] [PATCH 2/2] Changes to move hawkboard to the new infrastructure.
Sughosh Ganu
- [U-Boot] [PATCH 2/2] Changes to move hawkboard to the new infrastructure.
Sughosh Ganu
- [U-Boot] [PATCH 2/2] Changes to move hawkboard to the new infrastructure.
Sughosh Ganu
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Sughosh Ganu
- [U-Boot] [PATCH 2/2 V2] Changes to move hawkboard to the new spl infrastructure.
Sughosh Ganu
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Sughosh Ganu
- [U-Boot] [PATCH 2/2 V2] Changes to move hawkboard to the new spl infrastructure.
Sughosh Ganu
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Sughosh Ganu
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Sughosh Ganu
- [U-Boot] [PATCH 2/2 V3] Changes to move hawkboard to the new spl infrastructure.
Sughosh Ganu
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Sughosh Ganu
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Sughosh Ganu
- [U-Boot] [PATCH 2/2 V4] Changes to move hawkboard to the new spl infrastructure
Sughosh Ganu
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Sughosh Ganu
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Sughosh Ganu
- [U-Boot] [PATCH 2/2 V4] Changes to move hawkboard to the new spl infrastructure
Sughosh Ganu
- [U-Boot] [PATCH 2/2 V4] Changes to move hawkboard to the new spl infrastructure
Sughosh Ganu
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Sughosh Ganu
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Sughosh Ganu
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Sughosh Ganu
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Sughosh Ganu
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Sughosh Ganu
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Sughosh Ganu
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Sughosh Ganu
- [U-Boot] [PATCH 1/2 V3] arm926: Flush the data cache before disabling it
Sughosh Ganu
- [U-Boot] [PATCH 1/2 V3] arm926: Flush the data cache before disabling it
Sughosh Ganu
- [U-Boot] [PATCH 1/2 V4] arm926: Flush the data cache before disabling it
Sughosh Ganu
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Sughosh Ganu
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Sughosh Ganu
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Sughosh Ganu
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Sughosh Ganu
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Sughosh Ganu
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Sughosh Ganu
- [U-Boot] [PATCH v5 4/7] arm, arm926ejs: Do not clear the V bit on DA850 SoCs
Sughosh Ganu
- [U-Boot] [PATCH] arm, davinci: add PLL0 prediv to da850 lowlevel setup
Ben Gardiner
- [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it
Simon Glass
- [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it
Simon Glass
- [U-Boot] [PATCH v3] Input: keyboard - add device tree bindings for simple key matrixes
Simon Glass
- [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it
Simon Glass
- [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it
Simon Glass
- [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it
Simon Glass
- [U-Boot] initcall revisited - A new idea to discuss
Simon Glass
- [U-Boot] [PATCH v3] Input: keyboard - add device tree bindings for simple key matrixes
Simon Glass
- [U-Boot] [RFC PATCH v2 0/15] bootstage: record and publish boot progress timing
Simon Glass
- [U-Boot] [RFC PATCH 1/2] fdt: Add fdtdec_find_aliases() to deal with alias nodes
Simon Glass
- [U-Boot] initcall revisited - A new idea to discuss
Simon Glass
- [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it
Simon Glass
- [U-Boot] [PATCH 01/17] x86: Import glibc memcpy implementation
Simon Glass
- [U-Boot] [PATCH 02/17] x86: Speed up copy-to-RAM and clear BSS operations
Simon Glass
- [U-Boot] [PATCH 03/17] x86: Remove GDR related magic numbers
Simon Glass
- [U-Boot] [PATCH 04/17] x86: Rework Global Descriptor Table loading
Simon Glass
- [U-Boot] [PATCH 05/17] x86: Simplify Flash-to-RAM code execution transition
Simon Glass
- [U-Boot] [PATCH 06/17] x86: Rework relocation calcuations
Simon Glass
- [U-Boot] [PATCH 07/17] x86: Use fs for global data
Simon Glass
- [U-Boot] [PATCH 08/17] x86: Set GD_FLG_RELOC after entering in-RAM copy of U-Boot
Simon Glass
- [U-Boot] [PATCH 09/17] x86: Create weak init_cache() function
Simon Glass
- [U-Boot] [PATCH 10/17] x86: Allow cache before copy to RAM
Simon Glass
- [U-Boot] [PATCH 11/17] CHECKPATCH: arch/x86/cpu/*
Simon Glass
- [U-Boot] [PATCH 12/17] CHECKPATCH: arch/x86/lib/*
Simon Glass
- [U-Boot] [PATCH 13/17] x86: Move do_go_exec() out of board.c
Simon Glass
- [U-Boot] [PATCH 14/17] x86: Move setup_pcat_compatibility() out of board.c
Simon Glass
- [U-Boot] [PATCH 16/17] x86: Simplify board.c
Simon Glass
- [U-Boot] [PATCH 17/17] x86: Tweak initialisation procedure
Simon Glass
- [U-Boot] [PATCH 1/2] tegra2: Always build with USE_PRIVATE_LIBGCC=yes.
Simon Glass
- [U-Boot] [PATCH 1/2] tegra2: Always build with USE_PRIVATE_LIBGCC=yes.
Simon Glass
- [U-Boot] AES128 in U-Boot
Simon Glass
- [U-Boot] [PATCH 0/9] Fix a few warnings that bug me
Simon Glass
- [U-Boot] [PATCH 1/9] usb: Fix strict-aliasing warning in host/ohci-hcd.c
Simon Glass
- [U-Boot] [PATCH 2/9] Fix strict-aliasing warning in dlmalloc
Simon Glass
- [U-Boot] [PATCH 3/9] mpc5xxx: Fix strict-aliasing warnings in usb_ohci.c
Simon Glass
- [U-Boot] [PATCH 4/9] ppc4xx: Fix strict-aliasing warnings in usb_ohci.c
Simon Glass
- [U-Boot] [PATCH 5/9] sandbox: sort header files in os.c
Simon Glass
- [U-Boot] [PATCH 6/9] sandbox: Add required header to os.c
Simon Glass
- [U-Boot] [PATCH 7/9] Remove CONFIG_SYS_EXTBDINFO from snapper9260.h
Simon Glass
- [U-Boot] [PATCH 8/9] m68k: Change memsz to a signed char to avoid warning
Simon Glass
- [U-Boot] [PATCH 9/9] ppc: Change memsz variable to signed char
Simon Glass
- [U-Boot] initcall revisited - A new idea to discuss
Simon Glass
- [U-Boot] [PATCH 0/9] Fix a few warnings that bug me
Simon Glass
- [U-Boot] [PATCH 2/9] Fix strict-aliasing warning in dlmalloc
Simon Glass
- [U-Boot] [RFC PATCH v2 0/28] Create generic board init for ARM, x86, PPC
Simon Glass
- [U-Boot] [RFC PATCH v2 01/28] arm: Change board baud_rate to ulong
Simon Glass
- [U-Boot] [RFC PATCH v2 02/28] x86: Change board baud_rate to ulong
Simon Glass
- [U-Boot] [RFC PATCH v2 03/28] arm: Only display frame buffer info if there is LCD/video support
Simon Glass
- [U-Boot] [RFC PATCH v2 04/28] x86: Remove compiler warning in sc520_timer.c
Simon Glass
- [U-Boot] [RFC PATCH v2 05/28] x86: Remove dead code in eNET
Simon Glass
- [U-Boot] [RFC PATCH v2 06/28] x86: Add initial memory barrier macros
Simon Glass
- [U-Boot] [RFC PATCH v2 07/28] ppc: Add initial memory barrier macros
Simon Glass
- [U-Boot] [RFC PATCH v2 08/28] Introduce generic global_data
Simon Glass
- [U-Boot] [RFC PATCH v2 09/28] Introduce generic u-boot.h file
Simon Glass
- [U-Boot] [RFC PATCH v2 10/28] Introduce generic link symbol file
Simon Glass
- [U-Boot] [RFC PATCH v2 11/28] arm: Use sections header to obtain link symbols
Simon Glass
- [U-Boot] [RFC PATCH v2 12/28] x86: Change stub example to use asm-generic/sections.h
Simon Glass
- [U-Boot] [RFC PATCH v2 13/28] Introduce a basic initcall implementation
Simon Glass
- [U-Boot] [RFC PATCH v2 14/28] Define CONFIG_SYS_LEGACY_BOARD everywhere
Simon Glass
- [U-Boot] [RFC PATCH v2 15/28] Introduce generic pre-relocation board_f.c
Simon Glass
- [U-Boot] [RFC PATCH v2 16/28] Introduce generic post-relocation board_r.c
Simon Glass
- [U-Boot] [RFC PATCH v2 17/28] Add spl load feature
Simon Glass
- [U-Boot] [RFC PATCH v2 18/28] arm: Enable generic board support
Simon Glass
- [U-Boot] [RFC PATCH v2 19/28] Add CONFIG_SYS_SYM_OFFSETS to support offset symbols
Simon Glass
- [U-Boot] [RFC PATCH v2 20/28] x86: Use sections header to obtain link symbols
Simon Glass
- [U-Boot] [RFC PATCH v2 21/28] Add x86 fields to generic global_data
Simon Glass
- [U-Boot] [RFC PATCH v2 22/28] x86: Enable generic board support
Simon Glass
- [U-Boot] [RFC PATCH v2 23/28] Add ppc fields to generic global data
Simon Glass
- [U-Boot] [RFC PATCH v2 24/28] Adjust board_f for ppc
Simon Glass
- [U-Boot] [RFC PATCH v2 25/28] Adjust board_r.c for PowerPC
Simon Glass
- [U-Boot] [RFC PATCH v2 26/28] ppc: Enable generic board board
Simon Glass
- [U-Boot] [RFC PATCH v2 27/28] tegra: Mark board init files for ARMv4t
Simon Glass
- [U-Boot] [RFC PATCH v2 28/28] tegra: Enable generic board for Seaboard.
Simon Glass
- [U-Boot] [PATCH v2 03/17] x86: Remove GDR related magic numbers
Simon Glass
- [U-Boot] [PATCH v2 15/17] x86: Move relocation code out of board.c
Simon Glass
- [U-Boot] [PATCH v2 17/17] x86: Convert board_init_f_r to a processing loop
Simon Glass
- [U-Boot] [RFC PATCH 01/19] Introduce generic global_data
Simon Glass
- [U-Boot] initcall revisited - A new idea to discuss
Simon Glass
- [U-Boot] [PATCH 2/9] Fix strict-aliasing warning in dlmalloc
Simon Glass
- [U-Boot] [PATCH v3] Add 'patman' patch generation, checking and submission script
Simon Glass
- [U-Boot] [PATCH 01/14] Add AES crypto library
Simon Glass
- [U-Boot] [PATCH 03/14] tegra: Add crypto library for warmboot code
Simon Glass
- [U-Boot] [PATCH 4/7] tegra: Add I2C driver
Simon Glass
- [U-Boot] [PATCH 4/7] tegra: Add I2C driver
Simon Glass
- [U-Boot] [RFC PATCH v2 01/15] bootstage: Create an initial header for boot progress integers
Simon Glass
- [U-Boot] [RFC PATCH v2 04/15] bootstage: Convert progress numbers 1-9 into enums
Simon Glass
- [U-Boot] [RFC PATCH v2 05/15] bootstage: Convert progress numbers 10-19 to enums
Simon Glass
- [U-Boot] [RFC PATCH v2 11/15] bootstage: Define an optional microsecond timer
Simon Glass
- [U-Boot] [RFC PATCH v2 13/15] bootstage: Add microsecond boot time measurement
Simon Glass
- [U-Boot] [RFC PATCH v2 15/15] bootstage: arm: Add bootstage calls in board and bootm
Simon Glass
- [U-Boot] [PATCH v2 15/17] x86: Move relocation code out of board.c
Simon Glass
- [U-Boot] [PATCH v2 17/17] x86: Convert board_init_f_r to a processing loop
Simon Glass
- [U-Boot] [PATCH 1/9] usb: Fix strict-aliasing warning in host/ohci-hcd.c
Simon Glass
- [U-Boot] [RFC PATCH 01/19] Introduce generic global_data
Simon Glass
- [U-Boot] [PATCH 4/7] tegra: Add I2C driver
Simon Glass
- [U-Boot] [RFC PATCH v2 01/15] bootstage: Create an initial header for boot progress integers
Simon Glass
- [U-Boot] [RFC PATCH v2 15/15] bootstage: arm: Add bootstage calls in board and bootm
Simon Glass
- [U-Boot] [RFC PATCH v2 11/15] bootstage: Define an optional microsecond timer
Simon Glass
- [U-Boot] [PATCH] tegra: mmc: Support operation with dcache enabled
Simon Glass
- [U-Boot] [PATCH v2 0/4] Add SMDK5250 board support
Simon Glass
- [U-Boot] [RFC PATCH 01/19] Introduce generic global_data
Simon Glass
- [U-Boot] [PATCH 1/3] tegra2: Fix conflicting pinmux for UARTA
Simon Glass
- [U-Boot] [PATCH 2/3] tegra2: Fix default RAM size selection in odmdata
Simon Glass
- [U-Boot] [PATCH 3/3] tegra2: Add support for Compal Paz00 (Toshiba AC100)
Simon Glass
- [U-Boot] [PATCH 3/3] tegra2: Add support for Compal Paz00 (Toshiba AC100)
Simon Glass
- [U-Boot] [PATCH 3/3] tegra2: Add support for Compal Paz00 (Toshiba AC100)
Simon Glass
- [U-Boot] [PATCH 3/3] tegra2: Add support for Compal Paz00 (Toshiba AC100)
Simon Glass
- [U-Boot] [PATCH 3/7] tegra: Add I2C support to funcmux
Simon Glass
- [U-Boot] [PATCH 5/9] sandbox: sort header files in os.c
Simon Glass
- [U-Boot] [PATCH 6/9] sandbox: Add required header to os.c
Simon Glass
- [U-Boot] [PATCH v2 5/9] sandbox: sort header files in os.c
Simon Glass
- [U-Boot] [PATCH v2 6/9] sandbox: Add required header to os.c
Simon Glass
- [U-Boot] [PATCH 0/7] tegra: Enhance funcmux to support I2C and MMC
Simon Glass
- [U-Boot] [PATCH 1/7] tegra: Adjust funcmux config test to permit expansion
Simon Glass
- [U-Boot] [PATCH 2/7] tegra: Add I2C support to funcmux
Simon Glass
- [U-Boot] [PATCH 3/7] tegra: Enhance funcmux to support options
Simon Glass
- [U-Boot] [PATCH 4/7] tegra: Add SDMMC support to funcmux
Simon Glass
- [U-Boot] [PATCH 5/7] tegra: Use funcmux for MMC on tamonten
Simon Glass
- [U-Boot] [PATCH 6/7] tegra: Use funcmux for MMC on harmony
Simon Glass
- [U-Boot] [PATCH 7/7] tegra: Use funcmux for MMC on seaboard
Simon Glass
- [U-Boot] [PATCH 3/7] tegra: Add I2C support to funcmux
Simon Glass
- [U-Boot] [PATCH v2] tegra: mmc: Support operation with dcache enabled
Simon Glass
- [U-Boot] [PATCH v3] tegra2: Enable data cache
Simon Glass
- [U-Boot] [PATCH 0/7] tegra: Enhance funcmux to support I2C and MMC
Simon Glass
- [U-Boot] [RFC PATCH 1/2] fdt: Add fdtdec_find_aliases() to deal with alias nodes
Simon Glass
- [U-Boot] [PATCH v2 5/9] sandbox: sort header files in os.c
Simon Glass
- [U-Boot] [PATCH v3 5/9] sandbox: sort header files in os.c
Simon Glass
- [U-Boot] [PATCH v3 6/9] sandbox: Add required header to os.c
Simon Glass
- [U-Boot] [PATCH v2 1/8] sandbox: fdt: Add support for CONFIG_OF_CONTROL
Simon Glass
- [U-Boot] [PATCH v2 2/8] sandbox: config: Enable fdt and snprintf() options
Simon Glass
- [U-Boot] [PATCH v2 3/8] sandbox: gpio: Add basic driver for simulating GPIOs
Simon Glass
- [U-Boot] [PATCH v2 4/8] sandbox: Enable GPIO driver
Simon Glass
- [U-Boot] [PATCH v2 5/8] sandbox: Add concept of sandbox state
Simon Glass
- [U-Boot] [PATCH v2 6/8] sandbox: Allow processing instead of or before main loop
Simon Glass
- [U-Boot] [PATCH v2 7/8] sandbox: Add flags for open() call
Simon Glass
- [U-Boot] [PATCH v2 8/8] sandbox: Add basic command line parsing
Simon Glass
- [U-Boot] Help needed on Colibri T20 - Iris Board
Simon Glass
- [U-Boot] [PATCH 5/7] tegra: Use funcmux for MMC on tamonten
Simon Glass
- [U-Boot] [PATCH 0/7] tegra: Enhance funcmux to support I2C and MMC
Simon Glass
- [U-Boot] [PATCH v2 0/7] tegra: Enhance funcmux to support I2C and MMC
Simon Glass
- [U-Boot] [PATCH v2 1/7] tegra: Adjust funcmux config test to permit expansion
Simon Glass
- [U-Boot] [PATCH v2 2/7] tegra: Add enum to select from available funcmux configs
Simon Glass
- [U-Boot] [PATCH v2 3/7] tegra: Add I2C support to funcmux
Simon Glass
- [U-Boot] [PATCH v2 4/7] tegra: Add SDMMC support to funcmux
Simon Glass
- [U-Boot] [PATCH v2 5/7] tegra: Use funcmux for MMC on tamonten
Simon Glass
- [U-Boot] [PATCH v2 6/7] tegra: Use funcmux for MMC on harmony
Simon Glass
- [U-Boot] [PATCH v2 7/7] tegra: Use funcmux for MMC on seaboard
Simon Glass
- [U-Boot] [PATCH v2 0/2] fdt: Deal correctly with alias nodes
Simon Glass
- [U-Boot] [PATCH v2 1/2] fdt: Add fdtdec_find_aliases() to deal with alias nodes
Simon Glass
- [U-Boot] [PATCH v2 2/2] fdt: Add tests for fdtdec
Simon Glass
- [U-Boot] [PATCH 4/7] tegra: Add I2C driver
Simon Glass
- [U-Boot] [PATCH v4 0/20] tegra: Add fdt definitions and USB driver
Simon Glass
- [U-Boot] [PATCH v4 01/20] fdt: Tidy up a few fdtdec problems
Simon Glass
- [U-Boot] [PATCH v4 02/20] fdt: Add functions to access phandles, arrays and bools
Simon Glass
- [U-Boot] [PATCH v4 03/20] fdt: Add basic support for decoding GPIO definitions
Simon Glass
- [U-Boot] [PATCH v4 04/20] arm: fdt: Ensure that an embedded fdt is word-aligned
Simon Glass
- [U-Boot] [PATCH v4 05/20] arm: fdt: Add skeleton device tree file from kernel
Simon Glass
- [U-Boot] [PATCH v4 06/20] tegra: fdt: Add Tegra2x device tree file from kernel
Simon Glass
- [U-Boot] [PATCH v4 07/20] tegra: fdt: Add device tree file for Tegra2 Seaboard from kernel
Simon Glass
- [U-Boot] [PATCH v4 08/20] fdt: Add staging area for device tree binding documentation
Simon Glass
- [U-Boot] [PATCH v4 09/20] fdt: Add tegra-usb bindings file from linux
Simon Glass
- [U-Boot] [PATCH v4 10/20] tegra: fdt: Add additional USB binding
Simon Glass
- [U-Boot] [PATCH v4 11/20] tegra: fdt: Add clock bindings
Simon Glass
- [U-Boot] [PATCH v4 12/20] tegra: usb: fdt: Add additional device tree definitions for USB ports
Simon Glass
- [U-Boot] [PATCH v4 13/20] tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard
Simon Glass
- [U-Boot] [PATCH v4 14/20] usb: Add support for txfifo threshold
Simon Glass
- [U-Boot] [PATCH v4 15/20] fdt: Add function to return peripheral/clock ID
Simon Glass
- [U-Boot] [PATCH v4 16/20] tegra: usb: Add support for Tegra USB peripheral
Simon Glass
- [U-Boot] [PATCH v4 17/20] tegra: usb: Add USB support to nvidia boards
Simon Glass
- [U-Boot] [PATCH v4 18/20] tegra: usb: Add common USB defines for tegra2 boards
Simon Glass
- [U-Boot] [PATCH v4 19/20] tegra: usb: Enable USB on Seaboard
Simon Glass
- [U-Boot] [PATCH v4 20/20] tegra: fdt: Enable FDT support for Seaboard
Simon Glass
- [U-Boot] [PATCH v2 0/9] Unified command execution in one place
Simon Glass
- [U-Boot] [RFC PATCH 1/2] fdt: Add fdtdec_find_aliases() to deal with alias nodes
Simon Glass
- [U-Boot] [PATCH v2 01/17] x86: Import glibc memcpy implementation
Simon Glass
- [U-Boot] [PATCH v2 02/17] x86: Speed up copy-to-RAM and clear BSS operations
Simon Glass
- [U-Boot] [PATCH v2 03/17] x86: Remove GDR related magic numbers
Simon Glass
- [U-Boot] [PATCH v2 04/17] x86: Rework Global Descriptor Table loading
Simon Glass
- [U-Boot] [PATCH v2 05/17] x86: Simplify Flash-to-RAM code execution transition
Simon Glass
- [U-Boot] [PATCH v2 06/17] x86: Rework relocation calculations
Simon Glass
- [U-Boot] [PATCH v2 07/17] x86: Use fs for global data
Simon Glass
- [U-Boot] [PATCH v2 08/17] x86: Set GD_FLG_RELOC after entering in-RAM copy of U-Boot
Simon Glass
- [U-Boot] [PATCH v2 09/17] x86: Create weak init_cache() and default enable_caches() functions
Simon Glass
- [U-Boot] [PATCH v2 10/17] x86: Allow cache before copy to RAM
Simon Glass
- [U-Boot] [PATCH v2 11/17] x86: Tweak IDT and GDT for alignment and readability
Simon Glass
- [U-Boot] [PATCH v2 12/17] CHECKPATCH: arch/x86/lib/*
Simon Glass
- [U-Boot] [PATCH v2 13/17] x86: Move do_go_exec() out of board.c
Simon Glass
- [U-Boot] [PATCH v2 14/17] x86: Move setup_pcat_compatibility() out of board.c
Simon Glass
- [U-Boot] [PATCH v2 15/17] x86: Move relocation code out of board.c
Simon Glass
- [U-Boot] [PATCH v2 16/17] x86: Split init functions out of board.c
Simon Glass
- [U-Boot] [PATCH v2 17/17] x86: Convert board_init_f_r to a processing loop
Simon Glass
- [U-Boot] [PATCH] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back
Simon Glass
- [U-Boot] [RFC PATCH v2 15/15] bootstage: arm: Add bootstage calls in board and bootm
Simon Glass
- [U-Boot] [RFC PATCH v2 13/15] bootstage: Add microsecond boot time measurement
Simon Glass
- [U-Boot] [PATCH v2 0/7] tegra: Add I2C driver and associated parts
Simon Glass
- [U-Boot] [PATCH v2 1/7] tegra: Rename NV_PA_PMC_BASE to TEGRA2_PMC_BASE
Simon Glass
- [U-Boot] [PATCH v2 2/7] fdt: Add function to allow aliases to refer to multiple nodes
Simon Glass
- [U-Boot] [PATCH v2 3/7] tegra: fdt: Add extra I2C bindings for U-Boot
Simon Glass
- [U-Boot] [PATCH v2 4/7] tegra: Add I2C driver
Simon Glass
- [U-Boot] [PATCH v2 5/7] tegra: Initialise I2C on Nvidia boards
Simon Glass
- [U-Boot] [PATCH v2 6/7] tegra: Select I2C ordering for Seaboard
Simon Glass
- [U-Boot] [PATCH v2 7/7] tegra: Enable I2C on Seaboard
Simon Glass
- [U-Boot] [PATCH 7/7] tegra: Enable I2C on Seaboard
Simon Glass
- [U-Boot] [PATCH 7/7] tegra: Enable I2C on Seaboard
Simon Glass
- [U-Boot] [PATCH 05/14] tegra: Add tegra_get_chip_type() to detect SKU
Simon Glass
- [U-Boot] [PATCH 06/14] tegra: Add EMC support for optimal memory timings
Simon Glass
- [U-Boot] [PATCH 13/14] tegra: Add EMC settings for Seaboard, Harmony
Simon Glass
- [U-Boot] [PATCH 07/14] tegra: Add PMU to manage power supplies
Simon Glass
- [U-Boot] [PATCH 08/14] tegra: Set up PMU for Nvidia boards
Simon Glass
- [U-Boot] [PATCH 13/14] tegra: Add EMC settings for Seaboard, Harmony
Simon Glass
- [U-Boot] [PATCH 07/14] tegra: Add PMU to manage power supplies
Simon Glass
- [U-Boot] [PATCH 13/14] tegra: Add EMC settings for Seaboard, Harmony
Simon Glass
- [U-Boot] [PATCH 13/14] tegra: Add EMC settings for Seaboard, Harmony
Simon Glass
- [U-Boot] [PATCH 4/7] tegra: Add I2C driver
Simon Glass
- [U-Boot] Help needed on Colibri T20 - Iris Board
Simon Glass
- [U-Boot] [PATCH v2 0/7] tegra: Add I2C driver and associated parts
Simon Glass
- [U-Boot] [PATCH v2 3/7] tegra: fdt: Add extra I2C bindings for U-Boot
Simon Glass
- [U-Boot] [PATCH v2 4/7] tegra: Add I2C driver
Simon Glass
- [U-Boot] [PATCH 06/14] tegra: Add EMC support for optimal memory timings
Simon Glass
- [U-Boot] [PATCH 12/14] tegra: Set vdd_core and vdd_cpu to high
Simon Glass
- [U-Boot] [PATCH 09/14] tegra: Add warmboot implementation
Simon Glass
- [U-Boot] [PATCH v2 4/9] Stop using builtin_run_command()
Simon Glass
- [U-Boot] [PATCH 05/14] tegra: Add tegra_get_chip_type() to detect SKU
Simon Glass
- [U-Boot] [PATCH v2 4/9] Stop using builtin_run_command()
Simon Glass
- [U-Boot] [PATCH v2 0/20] tegra: warmboot (suspend / resume) support
Simon Glass
- [U-Boot] [PATCH v2 01/20] fdt: Add function to locate an array in the device tree
Simon Glass
- [U-Boot] [PATCH v2 02/20] i2c: Add TPS6586X driver
Simon Glass
- [U-Boot] [PATCH v2 03/20] Add AES crypto library
Simon Glass
- [U-Boot] [PATCH v2 04/20] tegra: Move ap20.h header into arch location
Simon Glass
- [U-Boot] [PATCH v2 05/20] tegra: Add functions to access low-level Osc/PLL details
Simon Glass
- [U-Boot] [PATCH v2 06/20] tegra: Add crypto library for warmboot code
Simon Glass
- [U-Boot] [PATCH v2 07/20] tegra: Add flow, gp_padctl, fuse, sdram headers
Simon Glass
- [U-Boot] [PATCH v2 08/20] tegra: Add tegra_get_chip_type() to detect SKU
Simon Glass
- [U-Boot] [PATCH v2 09/20] tegra: Add EMC support for optimal memory timings
Simon Glass
- [U-Boot] [PATCH v2 10/20] tegra: Add PMU to manage power supplies
Simon Glass
- [U-Boot] [PATCH v2 11/20] tegra: Set up PMU for Nvidia boards
Simon Glass
- [U-Boot] [PATCH v2 12/20] tegra: Add warmboot implementation
Simon Glass
- [U-Boot] [PATCH v2 13/20] tegra: Setup PMC scratch info from ap20 setup
Simon Glass
- [U-Boot] [PATCH v2 14/20] tegra: Set up warmboot code on Nvidia boards
Simon Glass
- [U-Boot] [PATCH v2 15/20] Tegra2: Turn off power detect in board init
Simon Glass
- [U-Boot] [PATCH v2 16/20] tegra: Add EMC settings for Seaboard
Simon Glass
- [U-Boot] [PATCH v2 17/20] fdt: tegra: Add EMC node to device tree
Simon Glass
- [U-Boot] [PATCH v2 18/20] tegra: i2c: Add function to find DVC bus
Simon Glass
- [U-Boot] [PATCH v2 19/20] tegra: fdt: Add EMC data for Tegra2 Seaboard
Simon Glass
- [U-Boot] [PATCH v2 20/20] tegra: Enable LP0 on Seaboard
Simon Glass
- [U-Boot] [PATCH v2 19/20] tegra: fdt: Add EMC data for Tegra2 Seaboard
Simon Glass
- [U-Boot] [PATCH 09/14] tegra: Add warmboot implementation
Simon Glass
- [U-Boot] [PATCH 0/6] tegra: Add NAND flash support
Simon Glass
- [U-Boot] [PATCH 1/6] fdt: Add debugging to fdtdec_get_int/addr()
Simon Glass
- [U-Boot] [PATCH 2/6] tegra: Add NAND support to funcmux
Simon Glass
- [U-Boot] [PATCH 3/6] tegra: fdt: Add NAND controller binding and definitions
Simon Glass
- [U-Boot] [PATCH 4/6] tegra: fdt: Add NAND definitions to fdt
Simon Glass
- [U-Boot] [PATCH 5/6] tegra: nand: Add Tegra NAND driver
Simon Glass
- [U-Boot] [PATCH 6/6] tegra: Enable NAND on Seaboard
Simon Glass
- [U-Boot] [PATCH v2 4/9] Stop using builtin_run_command()
Simon Glass
- [U-Boot] [RFC PATCH v2 27/28] tegra: Mark board init files for ARMv4t
Simon Glass
- [U-Boot] [PATCH v4 0/9] Unified command execution in one place
Simon Glass
- [U-Boot] [PATCH v4 1/9] Remove CMD_PXE's static on run_command()
Simon Glass
- [U-Boot] [PATCH v4 2/9] Rename run_command() to builtin_run_command()
Simon Glass
- [U-Boot] [PATCH v4 3/9] Rename run_command2() to run_command()
Simon Glass
- [U-Boot] [PATCH v4 4/9] Stop using builtin_run_command()
Simon Glass
- [U-Boot] [PATCH v4 5/9] Don't include standard parser if hush is used
Simon Glass
- [U-Boot] [PATCH v4 6/9] Create a single cmd_call() function to handle command execution
Simon Glass
- [U-Boot] [PATCH v4 7/9] Remove interleave of non-U-Boot code in hush
Simon Glass
- [U-Boot] [PATCH v4 8/9] Add cmd_process() to process commands in one place
Simon Glass
- [U-Boot] [PATCH v4 9/9] Convert cmd_usage() calls in common to use a return value
Simon Glass
- [U-Boot] [PATCH 0/17] tegra: Add display driver and LCD support for Seaboard
Simon Glass
- [U-Boot] [PATCH 01/17] fdt: Add function to look up a phandle's register address
Simon Glass
- [U-Boot] [PATCH 02/17] fdt: Add header guard to fdtdec.h
Simon Glass
- [U-Boot] [PATCH 03/17] fdt: Correct GPIO name access in fdtdec
Simon Glass
- [U-Boot] [PATCH 04/17] tegra: Add display support to funcmux
Simon Glass
- [U-Boot] [PATCH 05/17] tegra: fdt: Add LCD definitions for Tegra
Simon Glass
- [U-Boot] [PATCH 06/17] tegra: Add support for PWFM
Simon Glass
- [U-Boot] [PATCH 07/17] tegra: Add SOC support for display/lcd
Simon Glass
- [U-Boot] [PATCH 08/17] tegra: Add LCD driver
Simon Glass
- [U-Boot] [PATCH 09/17] tegra: Add LCD support to Nvidia boards
Simon Glass
- [U-Boot] [PATCH 10/17] arm: Add control over cachability of memory regions
Simon Glass
- [U-Boot] [PATCH 11/17] lcd: Add CONFIG_ALIGN_LCD_TO_SECTION to align lcd for MMU
Simon Glass
- [U-Boot] [PATCH 12/17] lcd: Add support for flushing LCD fb from dcache after update
Simon Glass
- [U-Boot] [PATCH 13/17] tegra: Align LCD frame buffer to section boundary
Simon Glass
- [U-Boot] [PATCH 14/17] tegra: Support control of cache settings for LCD
Simon Glass
- [U-Boot] [PATCH 15/17] tegra: fdt: Add LCD definitions for Seaboard
Simon Glass
- [U-Boot] [PATCH 16/17] lcd: Add CONSOLE_SCROLL_LINES option to speed console
Simon Glass
- [U-Boot] [PATCH 17/17] tegra: Enable display/lcd support on Seaboard
Simon Glass
- [U-Boot] [PATCH v4] Add 'patman' patch generation, checking and submission script
Simon Glass
- [U-Boot] [RFC PATCH v2 13/15] bootstage: Add microsecond boot time measurement
Simon Glass
- [U-Boot] [PATCH v4] Add 'patman' patch generation, checking and submission script
Simon Glass
- [U-Boot] [PATCH v3 0/15] bootstage: record and publish boot progress timing
Simon Glass
- [U-Boot] [PATCH v3 01/15] bootstage: Create an initial header for boot progress integers
Simon Glass
- [U-Boot] [PATCH v3 02/15] bootstage: Make use of BOOTSTAGE_ID_RUN_OS in show_boot_progress()
Simon Glass
- [U-Boot] [PATCH v3 03/15] bootstage: Use show_boot_error() for -ve progress numbers
Simon Glass
- [U-Boot] [PATCH v3 04/15] bootstage: Convert progress numbers 1-9 into enums
Simon Glass
- [U-Boot] [PATCH v3 05/15] bootstage: Convert progress numbers 10-19 to enums
Simon Glass
- [U-Boot] [PATCH v3 06/15] bootstage: Convert progress numbers 20-41 to enums
Simon Glass
- [U-Boot] [PATCH v3 07/15] bootstage: Convert IDE progress numbers to enums
Simon Glass
- [U-Boot] [PATCH v3 08/15] bootstage: Convert NAND progress numbers to enums
Simon Glass
- [U-Boot] [PATCH v3 09/15] bootstage: Convert net progress numbers to enums
Simon Glass
- [U-Boot] [PATCH v3 10/15] bootstage: Convert FIT progress numbers to enums
Simon Glass
- [U-Boot] [PATCH v3 11/15] timer: add microsecond boot func
Simon Glass
- [U-Boot] [PATCH v3 12/15] bootstage: Replace show_boot_progress/error() with bootstage_...()
Simon Glass
- [U-Boot] [PATCH v3 13/15] bootstage: Implement core microsecond boot time measurement
Simon Glass
- [U-Boot] [PATCH v3 14/15] bootstage: Plumb in bootstage calls for basic operations
Simon Glass
- [U-Boot] [PATCH v3 15/15] bootstage: arm: Add bootstage calls in board and bootm
Simon Glass
- [U-Boot] [RFC PATCH v2 13/15] bootstage: Add microsecond boot time measurement
Simon Glass
- [U-Boot] [PATCH 12/17] lcd: Add support for flushing LCD fb from dcache after update
Simon Glass
- [U-Boot] [PATCH 5/6] tegra: nand: Add Tegra NAND driver
Simon Glass
- [U-Boot] [PATCH v2 7/8] sandbox: Add flags for open() call
Simon Glass
- [U-Boot] [PATCH v2 7/8] sandbox: Add flags for open() call
Simon Glass
- [U-Boot] [RESEND PATCH v3 0/6] Introduce generic relocation feature
Simon Glass
- [U-Boot] [RESEND PATCH v3 1/6] Create reloc.h and include it where needed
Simon Glass
- [U-Boot] [RESEND PATCH v3 2/6] define CONFIG_SYS_SKIP_RELOC for all archs
Simon Glass
- [U-Boot] [RESEND PATCH v3 3/6] Add generic relocation feature
Simon Glass
- [U-Boot] [RESEND PATCH v3 4/6] arm: Add processor function library
Simon Glass
- [U-Boot] [RESEND PATCH v3 5/6] arm: Move over to generic relocation
Simon Glass
- [U-Boot] [RESEND PATCH v3 6/6] arm: Remove unused code in start.S
Simon Glass
- [U-Boot] [RFC PATCH v2 0/28] Create generic board init for ARM, x86, PPC
Simon Glass
- [U-Boot] [PATCH v3 0/9] tegra: Enable keyboard with matrix keyboard driver
Simon Glass
- [U-Boot] [PATCH v3 1/9] fdt: Add fdtdec functions to read byte array
Simon Glass
- [U-Boot] [PATCH v3 2/9] input: Add linux/input.h for key code support
Simon Glass
- [U-Boot] [PATCH v3 3/9] input: Add generic keyboard input handler
Simon Glass
- [U-Boot] [PATCH v3 4/9] tegra: Add keyboard support to funcmux
Simon Glass
- [U-Boot] [PATCH v3 5/9] tegra: fdt: Add keyboard controller definition
Simon Glass
- [U-Boot] [PATCH v3 6/9] tegra: fdt: Add keyboard definitions for Seaboard
Simon Glass
- [U-Boot] [PATCH v3 7/9] tegra: Add tegra keyboard driver
Simon Glass
- [U-Boot] [PATCH v3 8/9] tegra: Switch on console mux and use environment for console
Simon Glass
- [U-Boot] [PATCH v3 9/9] tegra: Enable keyboard for Seaboard
Simon Glass
- [U-Boot] [PATCH v3 1/9] fdt: Add fdtdec functions to read byte array
Simon Glass
- [U-Boot] [PATCH 0/3] Bring in new I2C framework
Simon Glass
- [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support
Simon Glass
- [U-Boot] [PATCH 2/3] i2c: common changes for multibus/multiadapter support
Simon Glass
- [U-Boot] [PATCH 3/3] WIP: tegra: i2c: Enable new I2C framework
Simon Glass
- [U-Boot] [PATCH v2 0/9] Unified command execution in one place
Simon Glass
- [U-Boot] [PATCH v2 2/2] fdt: Add tests for fdtdec
Simon Glass
- [U-Boot] [PATCH v2 1/2] fdt: Add fdtdec_find_aliases() to deal with alias nodes
Simon Glass
- [U-Boot] [PATCH v3 0/2] fdt: Deal correctly with alias nodes
Simon Glass
- [U-Boot] [PATCH v3 1/2] fdt: Add fdtdec_find_aliases() to deal with alias nodes
Simon Glass
- [U-Boot] [PATCH v3 2/2] fdt: Add tests for fdtdec
Simon Glass
- [U-Boot] [PATCH v3 0/6] Introduce generic relocation feature
Simon Glass
- [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support
Simon Glass
- [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support
Simon Glass
- [U-Boot] [PATCH v4 10/20] tegra: fdt: Add additional USB binding
Simon Glass
- [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support
Simon Glass
- [U-Boot] [PATCH v4 10/20] tegra: fdt: Add additional USB binding
Simon Glass
- [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support
Simon Glass
- [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support
Simon Glass
- [U-Boot] [PATCH v2 2/7] fdt: Add function to allow aliases to refer to multiple nodes
Simon Glass
- [U-Boot] [PATCH v4 06/20] tegra: fdt: Add Tegra2x device tree file from kernel
Simon Glass
- [U-Boot] [PATCH v4 08/20] fdt: Add staging area for device tree binding documentation
Simon Glass
- [U-Boot] [PATCH v4 17/20] tegra: usb: Add USB support to nvidia boards
Simon Glass
- [U-Boot] [PATCH v4 12/20] tegra: usb: fdt: Add additional device tree definitions for USB ports
Simon Glass
- [U-Boot] [PATCH v4 16/20] tegra: usb: Add support for Tegra USB peripheral
Simon Glass
- [U-Boot] [PATCH v4 10/20] tegra: fdt: Add additional USB binding
Simon Glass
- [U-Boot] [PATCH v2 09/20] tegra: Add EMC support for optimal memory timings
Simon Glass
- [U-Boot] [PATCH v2 2/7] fdt: Add function to allow aliases to refer to multiple nodes
Simon Glass
- [U-Boot] [PATCH 01/28] net: Remove volatile from all of net except the eth driver interface
Simon Glass
- [U-Boot] [PATCH 02/28] net: cosmetic: checkpatch compliance
Simon Glass
- [U-Boot] [PATCH] sandbox: add ifdef protection to os.h
Simon Glass
- [U-Boot] [PATCH v2] main: unify command parsing functions
Simon Glass
- [U-Boot] [PATCH v4 03/20] fdt: Add basic support for decoding GPIO definitions
Simon Glass
- [U-Boot] [PATCH v4 07/20] tegra: fdt: Add device tree file for Tegra2 Seaboard from kernel
Simon Glass
- [U-Boot] [PATCH v2 3/7] tegra: fdt: Add extra I2C bindings for U-Boot
Simon Glass
- [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding
Simon Glass
- [U-Boot] [PATCH v3 1/2] fdt: Add fdtdec_find_aliases() to deal with alias nodes
Simon Glass
- [U-Boot] [PATCH v2 1/8] sandbox: fdt: Add support for CONFIG_OF_CONTROL
Simon Glass
- [U-Boot] [PATCH v2 2/8] sandbox: config: Enable fdt and snprintf() options
Simon Glass
- [U-Boot] [PATCH v2 3/8] sandbox: gpio: Add basic driver for simulating GPIOs
Simon Glass
- [U-Boot] [PATCH v2 4/8] sandbox: Enable GPIO driver
Simon Glass
- [U-Boot] [PATCH v2 6/8] sandbox: Allow processing instead of or before main loop
Simon Glass
- [U-Boot] [PATCH v2 8/8] sandbox: Add basic command line parsing
Simon Glass
- [U-Boot] [PATCH v3 1/8] sandbox: fdt: Add support for CONFIG_OF_CONTROL
Simon Glass
- [U-Boot] [PATCH v3 2/8] sandbox: config: Enable fdt and snprintf() options
Simon Glass
- [U-Boot] [PATCH v3 3/8] sandbox: gpio: Add basic driver for simulating GPIOs
Simon Glass
- [U-Boot] [PATCH v3 4/8] sandbox: Enable GPIO driver
Simon Glass
- [U-Boot] [PATCH v3 5/8] sandbox: Add concept of sandbox state
Simon Glass
- [U-Boot] [PATCH v3 6/8] sandbox: Allow processing instead of or before main loop
Simon Glass
- [U-Boot] [PATCH v3 7/8] sandbox: Add flags for open() call
Simon Glass
- [U-Boot] [PATCH v3 8/8] sandbox: Add basic command line parsing
Simon Glass
- [U-Boot] [PATCH 1/6] sandbox: add lseek helper
Simon Glass
- [U-Boot] device tree compilation problems.
Simon Glass
- [U-Boot] [PATCH v2] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back
Simon Glass
- [U-Boot] [PATCH v2] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back
Simon Glass
- [U-Boot] [PATCH 3/6] sandbox: SPI emulation bus
Simon Glass
- [U-Boot] [PATCH 4/6] sandbox: new SPI flash driver
Simon Glass
- [U-Boot] [PATCH 6/6] sandbox: add getenv support
Simon Glass
- [U-Boot] [PATCH 04/28] net: Make the MAC-seeded random number generator available to /net
Simon Glass
- [U-Boot] [PATCH 05/28] net: Move CDP out of net.c
Simon Glass
- [U-Boot] [PATCH 06/28] net: Move ARP out of net.c
Simon Glass
- [U-Boot] [PATCH 07/28] net: Move PING out of net.c
Simon Glass
- [U-Boot] [PATCH 08/28] net: Move RARP receive logic out of net.c
Simon Glass
- [U-Boot] [PATCH 01/28] net: Remove volatile from all of net except the eth driver interface
Simon Glass
- [U-Boot] [PATCH 02/28] net: cosmetic: checkpatch compliance
Simon Glass
- [U-Boot] [PATCH 10/28] net: cosmetic: Improve variable names and code readability
Simon Glass
- [U-Boot] [PATCH 11/28] net: Refactor IP, UPD, and ICMP header writing functions
Simon Glass
- [U-Boot] [PATCH 12/28] net: Refactor packet length computations
Simon Glass
- [U-Boot] [PATCH 13/28] net: Refactor bootp packet length computations
Simon Glass
- [U-Boot] [PATCH] SMDK5250: Add ethernet support
Simon Glass
- [U-Boot] [PATCH v4 0/20] tegra: Add fdt definitions and USB driver
Simon Glass
- [U-Boot] [PATCH v4 03/20] fdt: Add basic support for decoding GPIO definitions
Simon Glass
- [U-Boot] [PATCH v4 03/20] fdt: Add basic support for decoding GPIO definitions
Simon Glass
- [U-Boot] [PATCH v5 0/18] tegra: Add fdt definitions and USB driver
Simon Glass
- [U-Boot] [PATCH v5 01/18] fdt: Add basic support for decoding GPIO definitions
Simon Glass
- [U-Boot] [PATCH v5 02/18] arm: fdt: Ensure that an embedded fdt is word-aligned
Simon Glass
- [U-Boot] [PATCH v5 03/18] arm: fdt: Add skeleton device tree file from kernel
Simon Glass
- [U-Boot] [PATCH v5 04/18] tegra: fdt: Add Tegra2x device tree file from kernel
Simon Glass
- [U-Boot] [PATCH v5 05/18] tegra: fdt: Add device tree file for Tegra2 Seaboard from kernel
Simon Glass
- [U-Boot] [PATCH v5 06/18] fdt: Add staging area for device tree binding documentation
Simon Glass
- [U-Boot] [PATCH v5 07/18] fdt: Add tegra-usb bindings file from linux
Simon Glass
- [U-Boot] [PATCH v5 08/18] tegra: fdt: Add additional USB binding
Simon Glass
- [U-Boot] [PATCH v5 09/18] tegra: fdt: Add clock bindings
Simon Glass
- [U-Boot] [PATCH v5 10/18] tegra: usb: fdt: Add additional device tree definitions for USB ports
Simon Glass
- [U-Boot] [PATCH v5 11/18] tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard
Simon Glass
- [U-Boot] [PATCH v5 12/18] usb: Add support for txfifo threshold
Simon Glass
- [U-Boot] [PATCH v5 13/18] fdt: Add function to return peripheral/clock ID
Simon Glass
- [U-Boot] [PATCH v5 14/18] tegra: usb: Add support for Tegra USB peripheral
Simon Glass
- [U-Boot] [PATCH v5 15/18] tegra: usb: Add USB support to nvidia boards
Simon Glass
- [U-Boot] [PATCH v5 16/18] tegra: usb: Add common USB defines for tegra2 boards
Simon Glass
- [U-Boot] [PATCH v5 17/18] tegra: usb: Enable USB on Seaboard
Simon Glass
- [U-Boot] [PATCH v5 18/18] tegra: fdt: Enable FDT support for Seaboard
Simon Glass
- [U-Boot] [PATCH 1/2] ARM: tegra: Define Tegra20 CAR binding
Simon Glass
- [U-Boot] [PATCH 1/2] ARM: tegra: Define Tegra20 CAR binding
Simon Glass
- [U-Boot] serial : Device tree support for multiple serial devices.
Simon Glass
- [U-Boot] [PATCH 1/2] at91: modified NAND flash timing on meesc board
Daniel Gorsulowski
- [U-Boot] [PATCH 2/2] at91: modified NAND flash timing on otc570 board
Daniel Gorsulowski
- [U-Boot] [GIT PULL] please pull u-boot-mpc85xx
Paul Gortmaker
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Govindraj
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Govindraj
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Govindraj
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Govindraj
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Govindraj
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Govindraj
- [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3
Govindraj
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Govindraj
- [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3
Govindraj
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Govindraj
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Govindraj
- [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3
Govindraj
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Govindraj
- [U-Boot] [PATCH v2 0/4] Clean up ehci-omap and extend support for omap3/4 socs
Govindraj.R
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Govindraj.R
- [U-Boot] [PATCH v2 2/4] OMAP3+: Clock: Adding ehci clock enabling
Govindraj.R
- [U-Boot] [PATCH v2 3/4] OMAP4: clock-common: Move the usb dppl configuration to new func
Govindraj.R
- [U-Boot] [PATCH v2 4/4] OMAP3+: ehci-omap: enable usb host ports for beagle/panda
Govindraj.R
- [PATCH] ulpi: Modify the ulpi framework to accept port number
Govindraj.R
- [U-Boot] net: re-enumerating usb-ethernet devices hangs the system
Wolfgang Grandegger
- [U-Boot] [PATCH] eth: remove usb-ethernet devices before re-enumerating them
Wolfgang Grandegger
- [U-Boot] [PATCH v3] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board
Wolfgang Grandegger
- [U-Boot] mx6qsabrelite U-Boot from SPI-NOR
Wolfgang Grandegger
- [U-Boot] [PATCH 0/6] Cleanups and updates for cm-t35/3730
Igor Grinberg
- [U-Boot] [PATCH 1/6] cm-t35: cleanup the config file
Igor Grinberg
- [U-Boot] [PATCH 2/6] cm-t35: various cleanups
Igor Grinberg
- [U-Boot] [PATCH 3/6] cm-t35: add EEPROM module and pass Linux a serial number
Igor Grinberg
- [U-Boot] [PATCH 4/6] omap3: make get_board_rev() function weak
Igor Grinberg
- [U-Boot] [PATCH 5/6] cm-t35: pass correct revision information to Linux
Igor Grinberg
- [U-Boot] [PATCH 6/6] cm-t35: use the new EEPROM module to read the MAC address
Igor Grinberg
- [U-Boot] [PATCH 1/6] cm-t35: cleanup the config file
Igor Grinberg
- [U-Boot] [PATCH v3 2/3] ARM:AM33XX: Add mmc/sd support
Igor Grinberg
- [U-Boot] [PATCH v3 3/3] ARM:AM33XX: Add SPL support for AM335X EVM
Igor Grinberg
- [U-Boot] [PATCH v3 3/3] ARM:AM33XX: Add SPL support for AM335X EVM
Igor Grinberg
- [U-Boot] [PATCH v3 2/3] ARM:AM33XX: Add mmc/sd support
Igor Grinberg
- [U-Boot] [PATCH] doc: Add Tom Rini to git-mailrc
Igor Grinberg
- [U-Boot] [PATCH v2 3/6] cm-t35: add EEPROM module and pass Linux a serial number
Igor Grinberg
- [U-Boot] [PATCH v2 4/6] omap3: make get_board_rev() function weak
Igor Grinberg
- [U-Boot] [PATCH v4 5/5] ARM:AM33XX: Add SPL support for AM335X EVM
Igor Grinberg
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Igor Grinberg
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Igor Grinberg
- [U-Boot] [PATCH v3 3/6] cm-t35: add EEPROM module and pass Linux a serial number
Igor Grinberg
- [U-Boot] [PATCH v2 6/6] cm-t35: use the new EEPROM module to read the MAC address
Igor Grinberg
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Igor Grinberg
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Igor Grinberg
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Igor Grinberg
- [U-Boot] [PATCH v6 3/4] EXYNOS: Add SMDK5250 board support
Igor Grinberg
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Igor Grinberg
- [U-Boot] [PATCH 03/14] Add power bus message definitions in twl4030.h
Igor Grinberg
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Igor Grinberg
- [U-Boot] [PATCH v2] common/image.c: align usage of fdt_high with initrd_high
Shawn Guo
- [U-Boot] [PATCH v2] common/image.c: align usage of fdt_high with initrd_high
Shawn Guo
- [U-Boot] [PATCH v3] common/image.c: align usage of fdt_high with initrd_high
Shawn Guo
- [U-Boot] [PATCH v3] common/image.c: align usage of fdt_high with initrd_high
Shawn Guo
- [U-Boot] About mtest on boot
Anatolij Gustschin
- [U-Boot] Pull request: Davinci uboot
Hadli, Manjunath
- [U-Boot] initcall revisited - A new idea to discuss
Hebbar, Gururaja
- [U-Boot] [PATCH 00/28] Add link-local addressing support
Joe Hershberger
- [U-Boot] [PATCH 01/28] net: Remove volatile from all of net except the eth driver interface
Joe Hershberger
- [U-Boot] [PATCH 02/28] net: cosmetic: checkpatch compliance
Joe Hershberger
- [U-Boot] [PATCH 03/28] net: Move mv64x6x_eth_initialize() to board_eth_init()
Joe Hershberger
- [U-Boot] [PATCH 04/28] net: Make the MAC-seeded random number generator available to /net
Joe Hershberger
- [U-Boot] [PATCH 05/28] net: Move CDP out of net.c
Joe Hershberger
- [U-Boot] [PATCH 06/28] net: Move ARP out of net.c
Joe Hershberger
- [U-Boot] [PATCH 07/28] net: Move PING out of net.c
Joe Hershberger
- [U-Boot] [PATCH 08/28] net: Move RARP receive logic out of net.c
Joe Hershberger
- [U-Boot] [PATCH 09/28] net: cosmetic: Un-typedef variables in net
Joe Hershberger
- [U-Boot] [PATCH 10/28] net: cosmetic: Improve variable names and code readability
Joe Hershberger
- [U-Boot] [PATCH 11/28] net: Refactor IP, UPD, and ICMP header writing functions
Joe Hershberger
- [U-Boot] [PATCH 12/28] net: Refactor packet length computations
Joe Hershberger
- [U-Boot] [PATCH 13/28] net: Refactor bootp packet length computations
Joe Hershberger
- [U-Boot] [PATCH 14/28] net: Refactor ping recieve handler
Joe Hershberger
- [U-Boot] [PATCH 15/28] net: Refactor to call NetSendPacket() instead of calling eth_send()
Joe Hershberger
- [U-Boot] [PATCH 16/28] net: Refactor to protect access to the NetState variable
Joe Hershberger
- [U-Boot] [PATCH 17/28] net: Refactor to separate the UDP handler from the ARP handler
Joe Hershberger
- [U-Boot] [PATCH 18/28] net: Add NetUpdateEther() to handle ARP or Ping replies (VLAN or SNAP)
Joe Hershberger
- [U-Boot] [PATCH 19/28] net: Don't write the "serverip" env var if told not to in the config
Joe Hershberger
- [U-Boot] [PATCH 20/28] net: Fix compile warning if CONFIG_BOOTP_SERVERIP is not defined
Joe Hershberger
- [U-Boot] [PATCH 21/28] net: Remove unneeded static allocation for MAC address in PingSend()
Joe Hershberger
- [U-Boot] [PATCH 22/28] net: Fix net buffer initialization
Joe Hershberger
- [U-Boot] [PATCH 23/28] net: Refactor NetSendUDPPacket to share more code
Joe Hershberger
- [U-Boot] [PATCH 24/28] net: Don't copy every packet that waits for an ARP
Joe Hershberger
- [U-Boot] [PATCH 25/28] net: Add option CONFIG_BOOTP_CAN_FAIL
Joe Hershberger
- [U-Boot] [PATCH 26/28] net: Add link-local addressing support
Joe Hershberger
- [U-Boot] [PATCH 27/28] net: Work-around for brain-damaged Cisco routers with arp-proxy
Joe Hershberger
- [U-Boot] [PATCH 28/28] net: Allow filtering on debug traces in the net subsystem
Joe Hershberger
- [U-Boot] [PATCH 01/28] net: Remove volatile from all of net except the eth driver interface
Joe Hershberger
- [U-Boot] [PATCH 02/28] net: cosmetic: checkpatch compliance
Joe Hershberger
- [U-Boot] [PATCH 01/28] net: Remove volatile from all of net except the eth driver interface
Joe Hershberger
- [U-Boot] [PATCH 13/28] net: Refactor bootp packet length computations
Joe Hershberger
- [U-Boot] [PATCH 00/28] Add link-local addressing support
Joe Hershberger
- [U-Boot] [PATCH] ARMV7: Add support for TRATS board
HeungJun, Kim
- [U-Boot] [PATCH] ARMV7: Add support for TRATS board
HeungJun, Kim
- [U-Boot] [PATCH V2] ARMV7: Add support for TRATS board
HeungJun, Kim
- [U-Boot] [PATCH V2] ARMV7: Add support for TRATS board
HeungJun, Kim
- [U-Boot] [PATCH V2] ARMV7: Add support for TRATS board
HeungJun, Kim
- [U-Boot] [PATCH V2] ARMV7: Add support for TRATS board
HeungJun, Kim
- [U-Boot] [PATCH V2] ARMV7: Add support for TRATS board
HeungJun, Kim
- [U-Boot] [PATCH v3 0/3] ARMV7: Exynos4: Add support for TRATS board
HeungJun, Kim
- [U-Boot] [PATCH v3 1/3] ARMV7: Exynos4: Add watchdog.h for Exynos4
HeungJun, Kim
- [U-Boot] [PATCH v3 2/3] ARMV7: Exynos4: Add supoort power for Exynos4
HeungJun, Kim
- [U-Boot] [PATCH v3 3/3] ARMV7: Exynos4: Add support for TRATS board
HeungJun, Kim
- [U-Boot] [PATCH v2 0/4] Add SMDK5250 board support
HeungJun, Kim
- [U-Boot] [PATCH v3 RESEND] ARMV7: Exynos4: Add support for TRATS board
HeungJun, Kim
- [U-Boot] [PATCH v3 RESEND 3/3] ARMV7: Exynos4: Add support for TRATS board
HeungJun, Kim
- [U-Boot] [PATCH v4 0/4] ARMV7: Exynos4: Add support for TRATS board
HeungJun, Kim
- [U-Boot] [PATCH v4 1/4] ARMV7: Exynos4: Add watchdog.h for Exynos4
HeungJun, Kim
- [U-Boot] [PATCH v4 2/4] ARMV7: Exynos4: Add supoort power for Exynos4
HeungJun, Kim
- [U-Boot] [PATCH v4 3/4] ARMV7: Exynos4: Fix toolchain optimization problem for using volatile
HeungJun, Kim
- [U-Boot] [PATCH v4 4/4] ARMV7: Exynos4: Add support for TRATS board
HeungJun, Kim
- [U-Boot] [PATCH v5 0/3] ARMV7: Exynos4: Add support for TRATS board
HeungJun, Kim
- [U-Boot] [PATCH v5 1/3] ARMV7: Exynos4: Add watchdog.h for Exynos4
HeungJun, Kim
- [U-Boot] [PATCH v5 2/3] ARMV7: Exynos4: Add supoort power for Exynos4
HeungJun, Kim
- [U-Boot] [PATCH v5 3/3] ARMV7: Exynos4: Add support for TRATS board
HeungJun, Kim
- [U-Boot] gen_atmel_mci: CMDR 000d1052 (18) ARGR 0000ec00 (SR: 0000c0d7) XFER DTIP never unset, ignoring
Silent Hill
- [U-Boot] [PATCH] common, menu: do not trigger timeout again, if a line is read
Jason Hobbs
- [U-Boot] [PATCH 3/3 v2] common, menu: show menu on startup if CONFIG_MENU_SHOW is defined
Jason Hobbs
- [U-Boot] [PATCH] i.mx6: mx6x_pins: Fix uart txd definitions
Jason Hui
- [U-Boot] [PATCH] i.mx6q: mx6qsabrelite: Setup uart1 pinmux
Jason Hui
- [U-Boot] [PATCH] i.mx6q: configs: Add fdt_high and initrd_high variables
Jason Hui
- [U-Boot] [PATCH 5/5] i.mx6q: mx6qsabrelite: Update the network configuration
Jason Hui
- [U-Boot] [PATCH 2/3] imximage: Add support for i.MX6
Jason Hui
- [U-Boot] [PATCH 3/3] imximage: Sort bootops alphabetically
Jason Hui
- [U-Boot] [PATCH 1/3] imximage: Add MX53 to the documentation
Jason Hui
- [U-Boot] [PATCH V2] imx6: mx6qarm2: updated board_mmc_getcd() to the new prototype
Jason Hui
- [U-Boot] [PATCH V3] imx6: mx6qarm2: updated board_mmc_getcd() to the new prototype
Jason Hui
- [U-Boot] [PATCH 6/6] mx6q: mx6qsabrelite: Provide defaults for placing environment in serial flash
Jason Hui
- [U-Boot] [PATCH 6/6] mx6q: mx6qsabrelite: Provide defaults for placing environment in serial flash
Jason Hui
- [U-Boot] [PATCH 0/3] mxc_spi refactoring (for mx6q and mx6qsabrelite)
Jason Hui
- [U-Boot] [PATCH 1/3] mxc_spi: move machine specifics into CPU headers
Jason Hui
- [U-Boot] [PATCH 2/3] mx6q: Add support for ECSPI through mxc_spi driver
Jason Hui
- [U-Boot] [PATCH 3/3] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform
Jason Hui
- [U-Boot] v2011.12 and later do not boot on dreamplug.
Jason
- [U-Boot] v2011.12 and later do not boot on dreamplug.
Jason
- [U-Boot] [PATCH v3] Input: keyboard - add device tree bindings for simple key matrixes
Olof Johansson
- [U-Boot] [PATCH v3] Input: keyboard - add device tree bindings for simple key matrixes
Olof Johansson
- [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding
Olof Johansson
- [U-Boot] [PATCH v4 10/20] tegra: fdt: Add additional USB binding
Olof Johansson
- [U-Boot] [PATCH v4 10/20] tegra: fdt: Add additional USB binding
Olof Johansson
- [U-Boot] [PATCH v4 10/20] tegra: fdt: Add additional USB binding
Olof Johansson
- [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding
Olof Johansson
- [U-Boot] [PATCH V2 2/2] Exynos: Fix ARM Clock frequency calculation
Minkyu Kang
- [U-Boot] [PATCH V2 1/2] Exynos: PWM: Add TCMPB3 field in pwm structure
Minkyu Kang
- [U-Boot] [PATCH] Origen: Select SCLKMPLL as FIMD0 parent clock
Minkyu Kang
- [U-Boot] [PATCH 4/6] EEYNOS: Add SMDK5250 board support
Minkyu Kang
- [U-Boot] [PATCH 4/6] EEYNOS: Add SMDK5250 board support
Minkyu Kang
- [U-Boot] [PATCH V2] ARMV7: Add support for TRATS board
Minkyu Kang
- [U-Boot] [PATCH v3 3/3] ARMV7: Exynos4: Add support for TRATS board
Minkyu Kang
- [U-Boot] [PATCH v3 3/3] ARMV7: Exynos4: Add support for TRATS board
Minkyu Kang
- [U-Boot] [PATCH v2 2/4] ARM: EXYNOS: Add support for Exynos5 based SoCs
Minkyu Kang
- [U-Boot] [PATCH v3 3/4] EXYNOS: Add SMDK5250 board support
Minkyu Kang
- [U-Boot] [PATCH v3 2/4] ARM: EXYNOS: Add support for Exynos5 based SoCs
Minkyu Kang
- [U-Boot] [PATCH v5 0/3] ARMV7: Exynos4: Add support for TRATS board
Minkyu Kang
- [U-Boot] [PATCH 1/2] S5P: support generic watchdog timer
Minkyu Kang
- [U-Boot] [PATCH 2/2] TRATS: use the generic watchdog timer
Minkyu Kang
- [U-Boot] [PATCH] ORIGEN: remove duplicated MACH_TYPE define
Minkyu Kang
- [U-Boot] [PATCH 1/2] S5P: support generic watchdog timer
Minkyu Kang
- [U-Boot] [PATCH 2/2] TRATS: use the generic watchdog timer
Minkyu Kang
- [U-Boot] [PATCH] ORIGEN: remove duplicated MACH_TYPE define
Minkyu Kang
- [U-Boot] [PATCH] TRATS: Fix uart gpio config
Minkyu Kang
- [U-Boot] [PATCH] TRATS: set gpio of UART correctly
Minkyu Kang
- [U-Boot] [PATCH 4/6] EEYNOS: Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH 4/6] EEYNOS: Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH 4/6] EEYNOS: Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH 4/6] EEYNOS: Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH v2 0/4] Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH v2 1/4] Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro
Chander Kashyap
- [U-Boot] [PATCH v2 2/4] ARM: EXYNOS: Add support for Exynos5 based SoCs
Chander Kashyap
- [U-Boot] [PATCH v2 3/4] EXYNOS: Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH v2 4/4] EXYNOS: SMDK5250: Add MMC SPL support
Chander Kashyap
- [U-Boot] [PATCH v2 0/4] Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH v2 0/4] Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH v2 0/4] Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH v2 0/4] Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH v2 2/4] ARM: EXYNOS: Add support for Exynos5 based SoCs
Chander Kashyap
- [U-Boot] [PATCH v3 0/4] Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH v3 1/4] Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro
Chander Kashyap
- [U-Boot] [PATCH v3 2/4] ARM: EXYNOS: Add support for Exynos5 based SoCs
Chander Kashyap
- [U-Boot] [PATCH v3 3/4] EXYNOS: Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH v3 4/4] EXYNOS: SMDK5250: Add MMC SPL support
Chander Kashyap
- [U-Boot] [PATCH v3 3/4] EXYNOS: Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH v4 0/4] Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH v4 1/4] Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro
Chander Kashyap
- [U-Boot] [PATCH v4 2/4] ARM: EXYNOS: Add support for Exynos5 based SoCs
Chander Kashyap
- [U-Boot] [PATCH v4 3/4] EXYNOS: Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH v4 4/4] EXYNOS: SMDK5250: Add MMC SPL support
Chander Kashyap
- [U-Boot] [PATCH] SMDK5250: Add ethernet support
Chander Kashyap
- [U-Boot] [PATCH v4 3/4] EXYNOS: Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH v5 0/4] Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH v5 1/4] Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro
Chander Kashyap
- [U-Boot] [PATCH v5 2/4] ARM: EXYNOS: Add support for Exynos5 based SoCs
Chander Kashyap
- [U-Boot] [PATCH v5 3/4] EXYNOS: Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH v5 4/4] EXYNOS: SMDK5250: Add MMC SPL support
Chander Kashyap
- [U-Boot] [PATCH v5 0/4] Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH v6 0/4] Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH v6 1/4] Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro
Chander Kashyap
- [U-Boot] [PATCH v6 2/4] ARM: EXYNOS: Add support for Exynos5 based SoCs
Chander Kashyap
- [U-Boot] [PATCH v6 3/4] EXYNOS: Add SMDK5250 board support
Chander Kashyap
- [U-Boot] [PATCH v6 4/4] EXYNOS: SMDK5250: Add MMC SPL support
Chander Kashyap
- [U-Boot] [PATCH] TRATS: Fix uart gpio config
Chander Kashyap
- [U-Boot] [PATCH] mx28: fix i.MX28 spi driver
Alexander Keller
- [U-Boot] Help with Cross-Compiling U-boot for PPC
Will Khan
- [U-Boot] [PATCH 1/4] PXA: PXA27x Matrix keypad driver
Vasily Khoruzhick
- [U-Boot] [PATCH 2/4] zipitz2: enable pxa27x_mkp driver
Vasily Khoruzhick
- [U-Boot] [PATCH 3/4] zipitz2: use pxa_mmc_gen as MMC driver
Vasily Khoruzhick
- [U-Boot] [PATCH 4/4] zipitz2: fix boot issue introduced by PXA low level init rework
Vasily Khoruzhick
- [U-Boot] [PATCH v2 1/4] PXA: PXA27x Matrix keypad driver
Vasily Khoruzhick
- [U-Boot] [PATCH v2 2/4] zipitz2: enable pxa27x_mkp driver
Vasily Khoruzhick
- [U-Boot] [PATCH v2 3/4] zipitz2: use pxa_mmc_gen as MMC driver
Vasily Khoruzhick
- [U-Boot] [PATCH v2 4/4] zipitz2: fix boot issue introduced by PXA low level init rework
Vasily Khoruzhick
- [U-Boot] [PATCH v3 1/4] PXA: PXA27x Matrix keypad driver
Vasily Khoruzhick
- [U-Boot] [PATCH v3 2/4] zipitz2: enable pxa27x_mkp driver
Vasily Khoruzhick
- [U-Boot] [PATCH v3 3/4] zipitz2: use pxa_mmc_gen as MMC driver
Vasily Khoruzhick
- [U-Boot] [PATCH v3 4/4] zipitz2: fix boot issue introduced by PXA low level init rework
Vasily Khoruzhick
- [U-Boot] [PATCH v3 1/4] PXA: PXA27x Matrix keypad driver
Vasily Khoruzhick
- [U-Boot] [PATCH v3 3/4] zipitz2: use pxa_mmc_gen as MMC driver
Vasily Khoruzhick
- [U-Boot] [PATCH v4 1/3] PXA: PXA27x Matrix keypad driver
Vasily Khoruzhick
- [U-Boot] [PATCH v4 2/3] zipitz2: enable pxa27x_mkp driver
Vasily Khoruzhick
- [U-Boot] [PATCH v4 3/3] zipitz2: use pxa_mmc_gen as MMC driver
Vasily Khoruzhick
- [U-Boot] [PATCH v5 1/3] PXA: PXA27x Matrix keypad driver
Vasily Khoruzhick
- [U-Boot] [PATCH v5 2/3] zipitz2: enable pxa27x_mkp driver
Vasily Khoruzhick
- [U-Boot] [PATCH v5 3/3] zipitz2: use pxa_mmc_gen as MMC driver
Vasily Khoruzhick
- [U-Boot] [PATCH v6 1/3] PXA: PXA27x Matrix keypad driver
Vasily Khoruzhick
- [U-Boot] [PATCH v6 2/3] zipitz2: enable pxa27x_mkp driver
Vasily Khoruzhick
- [U-Boot] [PATCH v6 3/3] zipitz2: use pxa_mmc_gen as MMC driver
Vasily Khoruzhick
- [U-Boot] [PATCH v6 1/3] PXA: PXA27x Matrix keypad driver
Vasily Khoruzhick
- [U-Boot] [PATCH v4] cmd_fat: add FAT write command
Donggeun Kim
- [U-Boot] [PATCH] ARMV7: Add support for TRATS board
Kim, Heungjun
- [U-Boot] [PATCH v3 3/3] ARMV7: Exynos4: Add support for TRATS board
Kim, Heungjun
- [U-Boot] [PATCH v3 RESEND] ARMV7: Exynos4: Add support for TRATS board
Kim, Heungjun
- [U-Boot] [PATCH v2 3/6] cm-t35: add EEPROM module and pass Linux a serial number
Nikita Kiryanov
- [U-Boot] [PATCH 4/5] net: fec_mxc: Nove autonegoatiate restart after mii_postcall
Troy Kisky
- [U-Boot] [PATCH 4/5] net: fec_mxc: Nove autonegoatiate restart after mii_postcall
Troy Kisky
- [U-Boot] [PATCH 5/5] i.mx6q: mx6qsabrelite: Update the network configuration
Troy Kisky
- [U-Boot] [PATCH 1/4] net: fec_mxc: add 1000 Mbps selection
Troy Kisky
- [U-Boot] [PATCH 2/4] net: fec_mxc: add PHYLIB support
Troy Kisky
- [U-Boot] [PATCH 3/4] net: phy: add support for Micrel's KSZ9021
Troy Kisky
- [U-Boot] [PATCH 4/4] i.mx6q: mx6qsabrelite: Update the network configuration
Troy Kisky
- [U-Boot] [PATCH 3/4] net: phy: add support for Micrel's KSZ9021
Troy Kisky
- [U-Boot] [PATCH 3/4] net: phy: add support for Micrel's KSZ9021
Troy Kisky
- [U-Boot] [PATCH 3/4] net: phy: add support for Micrel's KSZ9021
Troy Kisky
- [U-Boot] [PATCH 2/4] net: fec_mxc: add PHYLIB support
Troy Kisky
- [U-Boot] [PATCH v2 3/9] openrisc: Add cpu files
Stefan Kristiansson
- [U-Boot] [PATCH v3 3/3] ARM:AM33XX: Add SPL support for AM335X EVM
Kumar Nath, Chandan
- [U-Boot] [PATCH 3/3] ARM: AM33XX: Add i2c support
Kumar Nath, Chandan
- [U-Boot] 4k page ONFI NAND
Vipin Kumar
- [U-Boot] [PATCH] mtd/nand:Fix wrong usage of is_blank() in fsl_ifc_run_command
Prabhakar Kushwaha
- [U-Boot] [PATCH] [v2] mtd/nand: Fix IFC driver to support 2K NAND page
Prabhakar Kushwaha
- [U-Boot] [PATCH] da850evm: drop NET_MULTI reference
Prabhakar Lad
- [U-Boot] [PATCH] da850evm: drop NET_MULTI reference
Prabhakar Lad
- [U-Boot] [U-Boot-Users]
Prabhakar Lad
- [U-Boot] SPL Framework: Add support for U_BOOT_CMD
Prabhakar Lad
- [U-Boot] SPL Framework: Add support for U_BOOT_CMD
Prabhakar Lad
- [U-Boot] [PATCH 00/14] Nokia RX-51 support
Sergey Lapin
- [U-Boot] [PATCH 00/14] Nokia RX-51 support
Sergey Lapin
- [U-Boot] [PATCH 00/14] Nokia RX-51 support
Sergey Lapin
- [U-Boot] [PATCH 13/14] New command bootmenu: ANSI terminal Boot Menu support
Sergey Lapin
- [U-Boot] How to make a u-boot that supports a particular board.
Sergey Lapin
- [U-Boot] mx28: booting u-boot via USB
Sergey Lapin
- [U-Boot] [PATCH] nand_util: correct YAFFS image write function
Kassey Lee
- [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding
Grant Likely
- [U-Boot] [PATCH 5/6] tegra: nand: Add Tegra NAND driver
Jim Lin
- [U-Boot] [PATCH v2] linkage.h: move from blackfin to common includes
Macpaul Lin
- [U-Boot] [PATCH 09/14] tegra: Add warmboot implementation
Yen Lin
- [U-Boot] [PATCH 09/14] tegra: Add warmboot implementation
Yen Lin
- [U-Boot] [PATCH v3] Input: keyboard - add device tree bindings for simple key matrixes
Russell King - ARM Linux
- [U-Boot] [PATCH v3] Input: keyboard - add device tree bindings for simple key matrixes
Russell King - ARM Linux
- [U-Boot] [PATCH v7] net: ll_temac: Add LL TEMAC driver to u-boot
Stephan Linz
- [U-Boot] [PATCH v7] net: ll_temac: Add LL TEMAC driver to u-boot
Stephan Linz
- [U-Boot] [PATCH v7] net: ll_temac: Add LL TEMAC driver to u-boot
Stephan Linz
- [U-Boot] LL TEMAC V8 refactored
Stephan Linz
- [U-Boot] [PATCH 1/5] net: ll_temac: Add LL TEMAC driver to u-boot
Stephan Linz
- [U-Boot] [PATCH 2/5] microblaze: Enable several ethernet driver compilation
Stephan Linz
- [U-Boot] [PATCH 3/5] microblaze: Wire up LL_TEMAC driver initialization
Stephan Linz
- [U-Boot] [PATCH 4/5] microblaze: Enable phylib and mii support
Stephan Linz
- [U-Boot] [PATCH 5/5] microblaze: Add faked LL_TEMAC driver configuration
Stephan Linz
- [U-Boot] [PATCH 1/5] net: ll_temac: Add LL TEMAC driver to u-boot
Stephan Linz
- [U-Boot] [PATCH 1/5] net: ll_temac: Add LL TEMAC driver to u-boot
Stephan Linz
- [U-Boot] [PATCH] net: ll_temac: Remove useless memory erasing
Stephan Linz
- [U-Boot] [PATCH] net: ll_temac: Remove useless memory erasing
Stephan Linz
- [U-Boot] [PATCH 1/5] net: ll_temac: Add LL TEMAC driver to u-boot
Stephan Linz
- [U-Boot] [PATCH 1/5] net: ll_temac: Add LL TEMAC driver to u-boot
Stephan Linz
- [U-Boot] LL TEMAC v9 refactored
Stephan Linz
- [U-Boot] [PATCH 1/6] net: ll_temac: Add LL TEMAC driver to u-boot
Stephan Linz
- [U-Boot] [PATCH 2/6] microblaze: Enable several ethernet driver compilation
Stephan Linz
- [U-Boot] [PATCH 3/6] microblaze: Wire up LL_TEMAC driver initialization
Stephan Linz
- [U-Boot] [PATCH 4/6] microblaze: Enable phylib and mii support
Stephan Linz
- [U-Boot] [PATCH 5/6] microblaze: Enable TFTP put command
Stephan Linz
- [U-Boot] [PATCH 6/6] microblaze: Add faked LL_TEMAC driver configuration
Stephan Linz
- [U-Boot] [PATCH 1/6] net: ll_temac: Add LL TEMAC driver to u-boot
Stephan Linz
- [U-Boot] [PATCH 2/6] microblaze: Enable several ethernet driver compilation
Stephan Linz
- [U-Boot] [PREVIEW] LL TEMAC v10 refactored -- for evaluation only
Stephan Linz
- [U-Boot] [PATCH 1/8] net: ll_temac: Add LL TEMAC driver to u-boot
Stephan Linz
- [U-Boot] [PATCH 2/8] microblaze: Enable several ethernet driver compilation
Stephan Linz
- [U-Boot] [PATCH 3/8] microblaze: Enable phylib and mii support
Stephan Linz
- [U-Boot] [PATCH 4/8] microblaze: Enable TFTP put command
Stephan Linz
- [U-Boot] [PATCH 5/8] microblaze: Xilinx BSP to U-Boot conversion matrix
Stephan Linz
- [U-Boot] [PATCH 6/8] microblaze: Add faked LL_TEMAC driver configuration
Stephan Linz
- [U-Boot] [PATCH 7/8] microblaze: Wire up LL_TEMAC driver initialization
Stephan Linz
- [U-Boot] [PATCH 8/8] microblaze: ll_temac: export xilinx_ll_temac_eth_init() for evaluation
Stephan Linz
- [U-Boot] [PATCH 2/8] microblaze: Enable several ethernet driver compilation
Stephan Linz
- [U-Boot] [PATCH 6/8] microblaze: Add faked LL_TEMAC driver configuration
Stephan Linz
- [U-Boot] [PATCH v4 3/4] mmc: fsl_esdhc: Implement card-detect hook.
Jason Liu
- [U-Boot] [PATCH v4 1/4] mmc: Change board_mmc_getcd() function prototype.
Jason Liu
- [U-Boot] [PATCH v4 2/4] mmc: Implement card detection.
Jason Liu
- [U-Boot] [PATCH] imx: mx6q: add aipstz init for off platform periph
Jason Liu
- [U-Boot] [PATCH 0/3] mxc_spi refactoring (for mx6q and mx6qsabrelite)
Jason Liu
- [U-Boot] [PATCH] i.mx: i.mx5: update imx_get_mac_from_fuse function
Jason Liu
- [U-Boot] [PATCH] nand_util: correct YAFFS image write function
Liu, Wentao
- [U-Boot] add nand spl boot for qi_lb60 board
Xiangfu Liu
- [U-Boot] add nand spl boot for qi_lb60 board
Xiangfu Liu
- [U-Boot] [PATCH v2] add nand spl boot for qi_lb60 board
Xiangfu Liu
- [U-Boot] add nand spl boot for qi_lb60 board
Xiangfu Liu
- [U-Boot] add nand spl boot for qi_lb60 board
Xiangfu Liu
- [U-Boot] [PATCH v3] add nand spl boot for qi_lb60 board
Xiangfu Liu
- [U-Boot] [PATCH v2] add nand spl boot for qi_lb60 board
Xiangfu Liu
- [U-Boot] Toradex Colibri, PXA-270 (ARM)
Daniel Mack
- [U-Boot] [PATCH] USB: move keyboard polling into kbd driver
Allen Martin
- [U-Boot] [PATCH] USB: reevaluate iomux stdin on USB kbd detect
Allen Martin
- [U-Boot] [PATCH] USB: reevaluate iomux stdin on USB kbd detect
Allen Martin
- [U-Boot] [PATCH] USB: move keyboard polling into kbd driver
Allen Martin
- [U-Boot] [PATCH] beagle: add eeprom expansion board info for bct brettl3
Peter Meerwald
- [U-Boot] non SPL boot on beagleboard-xm
Peter Meerwald
- [U-Boot] non SPL boot on beagleboard-xm
Peter Meerwald
- [U-Boot] non SPL boot on beagleboard-xm
Peter Meerwald
- [U-Boot] beagle-xm boot logo / DSS in u-boot
Peter Meerwald
- [U-Boot] [PATCH]powerpc/8xxx:Add MPH controller support in USB device-tree fixup
Ramneek Mehresh
- [U-Boot] CONFIG_ENV_SIZE_REDUND
Frans Meulenbroeks
- [U-Boot] [PATCH] fw_env.h: added a few missing defines
Frans Meulenbroeks
- [U-Boot] tools/env/fw_env.h comment/code mismatch
Frans Meulenbroeks
- [U-Boot] [PATCH] fw_env: use vars from the board config
Frans Meulenbroeks
- [U-Boot] [PATCH] fw_env.c: use default env values if config file cannot be opened
Frans Meulenbroeks
- [U-Boot] [PATCH] fw_env.h: fix comment
Frans Meulenbroeks
- [U-Boot] [PATCH] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back
Eric Miao
- [U-Boot] [PATCH] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back
Eric Miao
- [U-Boot] Can u-Boot Ran from RAM?
Bud Miljkovic
- [U-Boot] [PATCH] Fix logic for selection of CONFIG_SYS_DEF_EEPROM_ADDR
Moffett, Kyle D
- [U-Boot] [PATCH] omap: mmc: Raise timeout value to 20ms
Andreas Müller
- [U-Boot] [PATCH v3 0/7] overo: add SPL support
Andreas Müller
- [U-Boot] [PATCH v3 1/7] drivers/i2c/omap24xx_i2c.c: replace printf with one argument by puts
Andreas Müller
- [U-Boot] [PATCH v3 2/7] board/overo/overo.c: replace printf with one argument by puts
Andreas Müller
- [U-Boot] [PATCH v3 3/7] include/configs/omap3_overo.h: several cleanups
Andreas Müller
- [U-Boot] [PATCH v3 4/7] drivers/i2c/omap24xx_i2c.c: move all local variables to SRAM
Andreas Müller
- [U-Boot] [PATCH v3 5/7] OMAP SPL: call timer_init in s_init to make udelay work earlier
Andreas Müller
- [U-Boot] [PATCH v3 6/7] omap_rev_string: output to stdout
Andreas Müller
- [U-Boot] [PATCH v3 7/7] overo: add SPL support
Andreas Müller
- [U-Boot] [PATCH] omap: mmc: Raise timeout value to 20ms
Andreas Müller
- [U-Boot] [PATCH v2 0/6] overo: add SPL support
Andreas Müller
- [U-Boot] OMAP3 performance regression in 2011.12
Andreas Müller
- [U-Boot] [PATCH] omap: mmc: Raise timeout value to 20ms
Andreas Müller
- [U-Boot] [PATCH] omap_hsmmc: Wait for CMDI to be clear
Andreas Müller
- [U-Boot] [PATCH v3 0/3] Added SPL support
Chandan Nath
- [U-Boot] [PATCH v3 1/3] ARM:AM33XX: Fix ddr and timer register offset
Chandan Nath
- [U-Boot] [PATCH v3 2/3] ARM:AM33XX: Add mmc/sd support
Chandan Nath
- [U-Boot] [PATCH v3 3/3] ARM:AM33XX: Add SPL support for AM335X EVM
Chandan Nath
- [U-Boot] [PATCH v4 0/5] Added SPL support
Chandan Nath
- [U-Boot] [PATCH v4 1/5] ARM:AM33XX: Replace CONFIG_AM335X with CONFIG_AM33XX
Chandan Nath
- [U-Boot] [PATCH v4 2/5] ARM:AM33XX: Fix ddr and timer register offset
Chandan Nath
- [U-Boot] [PATCH v4 3/5] ARM:AM33XX: Fixing AM335X config parameters
Chandan Nath
- [U-Boot] [PATCH v4 4/5] ARM:AM33XX: Add mmc/sd support
Chandan Nath
- [U-Boot] [PATCH v4 5/5] ARM:AM33XX: Add SPL support for AM335X EVM
Chandan Nath
- [U-Boot] [PATCH 1/2] SPI: Add i.MX ECSPI driver
Eric Nelson
- [U-Boot] mxc_spi refactoring (for mx6q)
Eric Nelson
- [U-Boot] [PATCH 1/6] mxc_spi: move machine specifics into CPU headers
Eric Nelson
- [U-Boot] [PATCH 2/6] mx6q: Add support for ECSPI through mxc_spi driver
Eric Nelson
- [U-Boot] [PATCH 3/6] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform
Eric Nelson
- [U-Boot] [PATCH 4/6] sf command: allow default chip select through CONFIG_SPI_FLASH_CS
Eric Nelson
- [U-Boot] [PATCH 5/6] mx6q: mx6qsabrelite: Provide default chip-select for serial flash
Eric Nelson
- [U-Boot] [PATCH 6/6] mx6q: mx6qsabrelite: Provide defaults for placing environment in serial flash
Eric Nelson
- [U-Boot] [PATCH 2/6] mx6q: Add support for ECSPI through mxc_spi driver
Eric Nelson
- [U-Boot] [PATCH 2/6] mx6q: Add support for ECSPI through mxc_spi driver
Eric Nelson
- [U-Boot] [PATCH 2/6] mx6q: Add support for ECSPI through mxc_spi driver
Eric Nelson
- [U-Boot] [PATCH 2/6] mx6q: Add support for ECSPI through mxc_spi driver
Eric Nelson
- [U-Boot] mx6qsabrelite U-Boot from SPI-NOR
Eric Nelson
- [U-Boot] [PATCH 6/6] mx6q: mx6qsabrelite: Provide defaults for placing environment in serial flash
Eric Nelson
- [U-Boot] [PATCH 6/6] mx6q: mx6qsabrelite: Provide defaults for placing environment in serial flash
Eric Nelson
- [U-Boot] mx6qsabrelite U-Boot from SPI-NOR
Eric Nelson
- [U-Boot] [PATCH V2 0/6] mxc_spi refactoring (for mx6q and mx6qsabrelite)
Eric Nelson
- [U-Boot] [PATCH V2 1/6] mxc_spi: move machine specifics into CPU headers
Eric Nelson
- [U-Boot] [PATCH V2 2/6] mx6q: Add support for ECSPI through mxc_spi driver
Eric Nelson
- [U-Boot] [PATCH V2 3/6] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform
Eric Nelson
- [U-Boot] [PATCH V2 4/6] sf command: allow default chip select through CONFIG_SPI_FLASH_CS
Eric Nelson
- [U-Boot] [PATCH V2 5/6] mx6q: mx6qsabrelite: Provide default chip-select for serial flash
Eric Nelson
- [U-Boot] [PATCH V2 6/6] mx6q: mx6qsabrelite: Conditionally define macros for environment in serial flash
Eric Nelson
- [U-Boot] [PATCH V2 0/6] mxc_spi refactoring (for mx6q and mx6qsabrelite)
Eric Nelson
- [U-Boot] [PATCH V3 0/6] mxc_spi refactoring (for mx6q and mx6qsabrelite)
Eric Nelson
- [U-Boot] [PATCH V3 1/6] mxc_spi: move machine specifics into CPU headers
Eric Nelson
- [U-Boot] [PATCH V3 2/6] mx6q: Add support for ECSPI through mxc_spi driver
Eric Nelson
- [U-Boot] [PATCH V3 3/6] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform
Eric Nelson
- [U-Boot] [PATCH V3 4/6] sf command: allow default chip select through CONFIG_SPI_FLASH_CS
Eric Nelson
- [U-Boot] [PATCH V3 5/6] mx6q: mx6qsabrelite: Provide default chip-select for serial flash
Eric Nelson
- [U-Boot] [PATCH V3 6/6] mx6q: mx6qsabrelite: Conditionally define macros for environment in serial flash
Eric Nelson
- [U-Boot] [PATCH V3 4/6] sf command: allow default chip select through CONFIG_SPI_FLASH_CS
Eric Nelson
- [U-Boot] [PATCH V3 4/6] sf command: allow default chip select through CONFIG_SPI_FLASH_CS
Eric Nelson
- [U-Boot] [PATCH V3 4/6] sf command: allow default chip select through CONFIG_SPI_FLASH_CS
Eric Nelson
- [U-Boot] [PATCH V4 0/7] mxc_spi refactoring (for mx6q and mx6qsabrelite)
Eric Nelson
- [U-Boot] [PATCH V4 1/7] mxc_spi: move machine specifics into CPU headers
Eric Nelson
- [U-Boot] [PATCH V4 2/7] mx6q: Add support for ECSPI through mxc_spi driver
Eric Nelson
- [U-Boot] [PATCH V4 3/7] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform
Eric Nelson
- [U-Boot] [PATCH V4 4/7] sf command: allow default bus and chip selects
Eric Nelson
- [U-Boot] [PATCH V4 5/7] README: Add description of SPI Flash (SF) command configuration
Eric Nelson
- [U-Boot] [PATCH V4 6/7] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select
Eric Nelson
- [U-Boot] [PATCH V4 7/7] mx6q: mx6qsabrelite: Conditionally define macros for environment in serial flash
Eric Nelson
- [U-Boot] [PATCH V4 0/7] mxc_spi refactoring (for mx6q and mx6qsabrelite)
Eric Nelson
- [U-Boot] [PATCH V4 5/7] README: Add description of SPI Flash (SF) command configuration
Eric Nelson
- [U-Boot] [PATCH V4 1/7] mxc_spi: move machine specifics into CPU headers
Eric Nelson
- [U-Boot] [PATCH V4 6/7] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select
Eric Nelson
- [U-Boot] [PATCH V4 6/7] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select
Eric Nelson
- [U-Boot] [PATCH V4 6/7] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select
Eric Nelson
- [U-Boot] [PATCH V4 6/7] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select
Eric Nelson
- [U-Boot] [PATCH V4 6/7] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select
Eric Nelson
- [U-Boot] [PATCH 0/3] mxc_spi refactoring (for mx6q and mx6qsabrelite)
Eric Nelson
- [U-Boot] [PATCH 1/3] mxc_spi: move machine specifics into CPU headers
Eric Nelson
- [U-Boot] [PATCH 2/3] mx6q: Add support for ECSPI through mxc_spi driver
Eric Nelson
- [U-Boot] [PATCH 3/3] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform
Eric Nelson
- [U-Boot] [PATCH 0/2] SPI flash enhancements: allow default bus and chip-selects
Eric Nelson
- [U-Boot] [PATCH 1/2] sf command: allow default bus and chip selects
Eric Nelson
- [U-Boot] [PATCH 2/2] README: Add description of SPI Flash (SF) command configuration
Eric Nelson
- [U-Boot] [PATCH] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select
Eric Nelson
- [U-Boot] [PATCH] mx6q: mx6qsabrelite: Conditionally define macros for environment in serial flash
Eric Nelson
- [U-Boot] [PATCH 0/3] mxc_spi refactoring (for mx6q and mx6qsabrelite)
Eric Nelson
- [U-Boot] Can u-Boot Ran from RAM?
Eric Nelson
- [U-Boot] [PATCH 3/3] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform
Eric Nelson
- [U-Boot] [PATCH 0/2] SPI flash enhancements: allow default bus and chip-selects
Eric Nelson
- [U-Boot] MX6q SPI refactoring and related patches
Eric Nelson
- [U-Boot] [PATCH V6 - Part 1 - 1/1] mx6q: define GPIO macros for translating between ordinals and port:index
Eric Nelson
- [U-Boot] [PATCH V6 - Part 2 - 0/3] mxc_spi refactoring (for mx6q and mx6qsabrelite)
Eric Nelson
- [U-Boot] [PATCH V6 - Part 2 - 1/3] mxc_spi: move machine specifics into CPU headers
Eric Nelson
- [U-Boot] [PATCH V6 - Part 2 - 2/3] mx6q: Add support for ECSPI through mxc_spi driver
Eric Nelson
- [U-Boot] [PATCH V6 - Part 2 - 3/3] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform
Eric Nelson
- [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects
Eric Nelson
- [U-Boot] [PATCH V6 - Part 3 - 1/2] sf command: allow default bus and chip selects
Eric Nelson
- [U-Boot] [PATCH V6 - Part 2 - 2/2] README: Add description of SPI Flash (SF) command configuration
Eric Nelson
- [U-Boot] [PATCH V6 - Part 4 - 1/1] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select
Eric Nelson
- [U-Boot] [PATCH V6 - Part 5 - 1/1] mx6q: mx6qsabrelite: Conditionally define macros for environment in serial flash
Eric Nelson
- [U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects
Eric Nelson
- [U-Boot] u-boot on beagleboard finds incorrect memory size.
Robert Nelson
- [U-Boot] u-boot on beagleboard finds incorrect memory size.
Robert Nelson
- [U-Boot] u-boot on beagleboard finds incorrect memory size.
Robert Nelson
- [U-Boot] u-boot on beagleboard finds incorrect memory size.
Robert Nelson
- [U-Boot] u-boot on beagleboard finds incorrect memory size.
Robert Nelson
- [U-Boot] u-boot on beagleboard finds incorrect memory size.
Robert Nelson
- [U-Boot] slow flash write with Freescale P1020 and PC28F256J3 NOR-flash
Daniel Nilsson
- [U-Boot] net: re-enumerating usb-ethernet devices hangs the system
Vincent Palatin
- [U-Boot] [PATCH] eth: remove usb-ethernet devices before re-enumerating them
Vincent Palatin
- [U-Boot] [PATCH] USB: fix USB keyboard polling parameter
Vincent Palatin
- [U-Boot] [PATCH] USB: fix USB keyboard polling parameter
Vincent Palatin
- [U-Boot] [PATCH] eth: remove usb-ethernet devices before re-enumerating them
Vincent Palatin
- [U-Boot] [PATCH] usb: add numeric keypad support to HID driver
Vincent Palatin
- [U-Boot] [PATCH] usb: add numeric keypad support to HID driver
Vincent Palatin
- [U-Boot] [PATCH v2 0/4] Add SMDK5250 board support
Kyungmin Park
- [U-Boot] [PATCH 1/3] ARM: I2C: I2C Multi byte address support
Patil, Rachna
- [U-Boot] [PATCH 2/3] ARM: AM33XX: Add AM33XX I2C driver support
Patil, Rachna
- [U-Boot] [PATCH 3/3] ARM: AM33XX: Add i2c support
Patil, Rachna
- [U-Boot] [PATCH 1/3] ARM: I2C: I2C Multi byte address support
Patil, Rachna
- [U-Boot] [PATCH 3/3] ARM: AM33XX: Add i2c support
Patil, Rachna
- [U-Boot] [PATCH v2 1/3] ARM: I2C: I2C Multi byte address support
Patil, Rachna
- [U-Boot] [PATCH v2 2/3] ARM: AM33XX: Add AM33XX I2C driver support
Patil, Rachna
- [U-Boot] [PATCH v2 3/3] ARM: AM33XX: Add i2c support
Patil, Rachna
- [U-Boot] [PATCH v3 1/3] ARM: I2C: I2C Multi byte address support
Patil, Rachna
- [U-Boot] [PATCH v3 2/3] ARM: AM33XX: Add AM33XX I2C driver support
Patil, Rachna
- [U-Boot] [PATCH v3 3/3] ARM: AM33XX: Add i2c support
Patil, Rachna
- [U-Boot] [PATCH v2] Blackfin: pr1: new board port
Dimitar Penev
- [U-Boot] [PATCH v2] Blackfin: br4: new board port
Dimitar Penev
- [U-Boot] u-boot-atmel support for SMSC9514
Wilson Perez
- [U-Boot] bootelf command for Pandaboard
Boban Petrovic
- [U-Boot] Secure update of uboot devices?
Kim Phillips
- [U-Boot] expection for help with ethernet driver for DP83849
Kim Phillips
- [U-Boot] [PATCH 1/4] powerpc/83xx/km: update SDRAM parameters for km8321 boards
Kim Phillips
- [U-Boot] [PATCH] mpc8313erdb: fix mtdparts address
Kim Phillips
- [U-Boot] [GIT PULL] Please pull u-boot-mpc83xx: new 8321 tuge1, GPIO support, fixes
Kim Phillips
- [U-Boot] [PATCH v3 03/16] Add gpio_request() to asm-generic header
Kim Phillips
- [U-Boot] Add ext4 write support
Kim Phillips
- [U-Boot] [PATCH 2/4] dfu: generic backend parts
Andrzej Pietrasiewicz
- [U-Boot] NAND boot looks broken on P1020RDB
Aggrwal Poonam-B10812
- [U-Boot] bootm not taking dtb
Aggrwal Poonam-B10812
- [U-Boot] About mtest on boot
Érico Porto
- [U-Boot] About mtest on boot
Érico Porto
- [U-Boot] About mtest on boot
Érico Porto
- [U-Boot] About mtest on boot
Érico Porto
- [U-Boot] About mtest on boot
Érico Porto
- [U-Boot] About mtest on boot
Érico Porto
- [U-Boot] About mtest on boot
Érico Porto
- [U-Boot] NAND boot looks broken on P1020RDB
Felix Radensky
- [U-Boot] [PATCH V3] mmc: access mxcmmc from mx31 boards
Helmut Raiger
- [U-Boot] [PATCH 1/2] mmc: access mxcmmc from mx31 boards
Helmut Raiger
- [U-Boot] [PATCH 2/2] tt01: add MMC support
Helmut Raiger
- [U-Boot] [PATCH 2/2] imx: tt01: add MMC support
Helmut Raiger
- [U-Boot] [PATCH V2] tt01: add MMC support
Helmut Raiger
- [U-Boot] [PATCH 1/2] fsl_pmic.h: add regulator mode 0 and 1 bits
Helmut Raiger
- [U-Boot] [PATCH 2/2] tt01: add MMC support
Helmut Raiger
- [U-Boot] [PATCH V3 1/2] mc13783.h: create and add regulator mode 0 and 1
Helmut Raiger
- [U-Boot] [PATCH V3 2/2] tt01: add MMC support
Helmut Raiger
- [U-Boot] [PATCH V3 2/2] tt01: add MMC support
Helmut Raiger
- [U-Boot] [PATCH V4] tt01: add MMC support
Helmut Raiger
- [U-Boot] [PATCH] tt01: add MMC and video support --> howto avoid LOGO blobs
Helmut Raiger
- [U-Boot] [PATCH] tt01: add video support and setup for release
Helmut Raiger
- [U-Boot] [PATCH 1/3] tt01: fix environment size
Helmut Raiger
- [U-Boot] [PATCH 2/3] tt01: add video support
Helmut Raiger
- [U-Boot] [PATCH 3/3] tt01: fix hush parser config, add release config
Helmut Raiger
- [U-Boot] Fwd: Re: U-Boot not auto booting
Helmut Raiger
- [U-Boot] [PATCH v4 0/4] mmc: Implement central card-detection.
Thierry Reding
- [U-Boot] [PATCH v4 1/4] mmc: Change board_mmc_getcd() function prototype.
Thierry Reding
- [U-Boot] [PATCH v4 2/4] mmc: Implement card detection.
Thierry Reding
- [U-Boot] [PATCH v4 3/4] mmc: fsl_esdhc: Implement card-detect hook.
Thierry Reding
- [U-Boot] [PATCH v4 4/4] mmc: tegra2: Implement card-detect hook.
Thierry Reding
- [U-Boot] [PATCH v3 0/4] mmc: Implement central card-detection.
Thierry Reding
- [U-Boot] [PATCH 5/7] tegra: Use funcmux for MMC on tamonten
Thierry Reding
- [U-Boot] [PATCH 2/2] Changes to move hawkboard to the new infrastructure.
Christian Riesch
- [U-Boot] [PATCH] da850evm: drop NET_MULTI reference
Christian Riesch
- [U-Boot] [PATCH] arm, davinci: Add support for the Calimain board from OMICRON electronics
Christian Riesch
- [U-Boot] [PATCH 2/2 V2] Changes to move hawkboard to the new spl infrastructure.
Christian Riesch
- [U-Boot] [PATCH] arm, davinci: Add support for the Calimain board from OMICRON electronics
Christian Riesch
- [U-Boot] [PATCH 2/2 V2] Changes to move hawkboard to the new spl infrastructure.
Christian Riesch
- [U-Boot] [PATCH 2/2 V3] Changes to move hawkboard to the new spl infrastructure.
Christian Riesch
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Christian Riesch
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Christian Riesch
- [U-Boot] [PATCH 2/2 V4] Changes to move hawkboard to the new spl infrastructure
Christian Riesch
- [U-Boot] [PATCH v2] arm, davinci: Add support for the Calimain board from OMICRON electronics
Christian Riesch
- [U-Boot] [PATCH 2/2 V4] Changes to move hawkboard to the new spl infrastructure
Christian Riesch
- [U-Boot] [PATCH 2/2 V4] Changes to move hawkboard to the new spl infrastructure
Christian Riesch
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Christian Riesch
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Christian Riesch
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Christian Riesch
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Christian Riesch
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Christian Riesch
- [U-Boot] [PATCH] arm, davinci: add PLL0 prediv to da850 lowlevel setup
Christian Riesch
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Christian Riesch
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Christian Riesch
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Christian Riesch
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Christian Riesch
- [U-Boot] SPL Framework: Add support for U_BOOT_CMD
Christian Riesch
- [U-Boot] SPL Framework: Add support for U_BOOT_CMD
Christian Riesch
- [U-Boot] SPL Framework: Add support for U_BOOT_CMD
Christian Riesch
- [U-Boot] [U-Boot-Users]-compilation error
Christian Riesch
- [U-Boot] Pull request: Davinci uboot
Christian Riesch
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Christian Riesch
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Christian Riesch
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Christian Riesch
- [U-Boot] [PATCH v5 0/7] Change ARM926EJ-S startup code, hawkboard and calimain
Christian Riesch
- [U-Boot] [PATCH v5 1/7] arm, davinci: Add lowlevel_init for SoCs other than DM644X
Christian Riesch
- [U-Boot] [PATCH v5 2/7] arm, arm926ejs: Do cpu critical inits only for boards that require it
Christian Riesch
- [U-Boot] [PATCH v5 3/7] arm, arm926ejs: Flush the data cache before disabling it
Christian Riesch
- [U-Boot] [PATCH v5 4/7] arm, arm926ejs: Do not clear the V bit on DA850 SoCs
Christian Riesch
- [U-Boot] [PATCH v5 5/7] arm, arm926ejs: Enable icache only if CONFIG_SYS_ICACHE_OFF is not defined
Christian Riesch
- [U-Boot] [PATCH v5 6/7] Changes to move hawkboard to the new spl infrastructure
Christian Riesch
- [U-Boot] [PATCH v5 7/7] arm, davinci: Add support for the Calimain board from OMICRON electronics
Christian Riesch
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Christian Riesch
- [U-Boot] slow flash write with Freescale P1020 and PC28F256J3 NOR-flash
Christian Riesch
- [U-Boot] A Problem of u-boot on TI PandaBoard porting
John Rigby
- [U-Boot] [PATCH v3 2/3] ARM:AM33XX: Add mmc/sd support
Tom Rini
- [U-Boot] [PATCH v3 3/3] ARM:AM33XX: Add SPL support for AM335X EVM
Tom Rini
- [U-Boot] [PATCH] arm/omap3: limit chip select iteration based on board config
Tom Rini
- [U-Boot] [PATCH 4/6] omap3: make get_board_rev() function weak
Tom Rini
- [U-Boot] [PATCH 3/6] cm-t35: add EEPROM module and pass Linux a serial number
Tom Rini
- [U-Boot] [PATCH v3 2/3] ARM:AM33XX: Add mmc/sd support
Tom Rini
- [U-Boot] [PATCH 0/6] Cleanups and updates for cm-t35/3730
Tom Rini
- [U-Boot] [PATCH 13/15] New board support: Nokia RX-51 aka N900
Tom Rini
- [U-Boot] [PATCH 15/15] RX-51: Add support for bootmenu
Tom Rini
- [U-Boot] [PATCH v2 6/6] overo: add SPL support / CONFIG_SYS_TEXT_BASE changed to 0x80100000
Tom Rini
- [U-Boot] [PATCH v2 0/6] overo: add SPL support
Tom Rini
- [U-Boot] [PATCH resend] OMAP3: Remove unused define CONFIG_OMAP3_*_DDR
Tom Rini
- [U-Boot] [PATCH] arm, davinci: Change byte order of RTC kick register values
Tom Rini
- [U-Boot] [PATCH v5] ARMV7: Add support For Logic OMAP35x/DM37x modules
Tom Rini
- [U-Boot] [PATCH] beagle: add eeprom expansion board info for bct brettl3
Tom Rini
- [U-Boot] [PATCH] omap4: fix boot issue on ES2.0 Panda
Tom Rini
- [U-Boot] [PATCH] OMAP MMC: Add delay before waiting for status
Tom Rini
- [U-Boot] [PATCH] omap: mmc: Raise timeout value to 20ms
Tom Rini
- [U-Boot] [PATCH] omap: mmc: Raise timeout value to 20ms
Tom Rini
- [U-Boot] [PATCH V2 4/4] ARM: omap3: Added Teejet mt_ventoux
Tom Rini
- [U-Boot] [PATCH] arm/omap3: limit chip select iteration based on board config
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL
Tom Rini
- [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL
Tom Rini
- [U-Boot] [PATCH] doc: Add Tom Rini to git-mailrc
Tom Rini
- [U-Boot] [PATCH 4/4] ARM: omap3: Added Teejet mt_ventoux
Tom Rini
- [U-Boot] [RFC] [PATCH] DaVinci/i2c: allow multiple buses
Tom Rini
- [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL
Tom Rini
- [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL
Tom Rini
- [U-Boot] OMAP3 performance regression in 2011.12
Tom Rini
- [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL
Tom Rini
- [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL
Tom Rini
- [U-Boot] [PATCH 2/2] Changes to move hawkboard to the new infrastructure.
Tom Rini
- [U-Boot] [PATCH 13/15] New board support: Nokia RX-51 aka N900
Tom Rini
- [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL
Tom Rini
- [U-Boot] [PATCH] arm, davinci: Add support for the Calimain board from OMICRON electronics
Tom Rini
- [U-Boot] [PATCH V4] nand_spl_simple: store ecc data on the stack
Tom Rini
- [U-Boot] [PATCH] omap: mmc: Raise timeout value to 20ms
Tom Rini
- [U-Boot] [PATCH v4 0/5] Added SPL support
Tom Rini
- [U-Boot] [PATCH] configs: Remove CONFIG_NET_MULTI from board files
Tom Rini
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Tom Rini
- [U-Boot] [PATCH v3 6/7] omap_rev_string: output to stdout
Tom Rini
- [U-Boot] [PATCH v3 6/7] omap_rev_string: output to stdout
Tom Rini
- [U-Boot] [PATCH v3 0/7] overo: add SPL support
Tom Rini
- [U-Boot] [PATCH 0/6] Cleanups and updates for cm-t35/3730
Tom Rini
- [U-Boot] [PATCH v3 7/7] overo: add SPL support
Tom Rini
- [U-Boot] [PATCH v3 4/7] drivers/i2c/omap24xx_i2c.c: move all local variables to SRAM
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] [PATCH V3 2/2] ARM: omap3: add support to Technexion twister board
Tom Rini
- [U-Boot] [PATCH] omap3: board.c - Fix compile warnings
Tom Rini
- [U-Boot] [PATCH v2] configs: Remove CONFIG_NET_MULTI from board files
Tom Rini
- [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3
Tom Rini
- [U-Boot] [PATCH] arm, davinci: cam_enc_4xx board updates
Tom Rini
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Tom Rini
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Tom Rini
- [U-Boot] [PATCH] arm, davinci: add PLL0 prediv to da850 lowlevel setup
Tom Rini
- [U-Boot] [PATCH] OMAP3: Correct get_sdr_cs_offset mask
Tom Rini
- [U-Boot] [PATCH v2 1/3] ARM: I2C: I2C Multi byte address support
Tom Rini
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Tom Rini
- [U-Boot] non SPL boot on beagleboard-xm
Tom Rini
- [U-Boot] non SPL boot on beagleboard-xm
Tom Rini
- [U-Boot] non SPL boot on beagleboard-xm
Tom Rini
- [U-Boot] SPL Framework: Add support for U_BOOT_CMD
Tom Rini
- [U-Boot] [PATCH] omap: mmc: Raise timeout value to 20ms
Tom Rini
- [U-Boot] [PATCH 01/14] arm, omap3: Define save_boot_params in lowlevel_init.S for SPL only
Tom Rini
- [U-Boot] [PATCH 01/14] arm, omap3: Define save_boot_params in lowlevel_init.S for SPL only
Tom Rini
- [U-Boot] SPL Framework: Add support for U_BOOT_CMD
Tom Rini
- [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3
Tom Rini
- [U-Boot] [PATCH] am3517evm: remove rootfstype kernel parameter for MMC boot device
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] SPL Linux Boot
Tom Rini
- [U-Boot] u-boot on beagleboard finds incorrect memory size.
Tom Rini
- [U-Boot] u-boot on beagleboard finds incorrect memory size.
Tom Rini
- [U-Boot] u-boot on beagleboard finds incorrect memory size.
Tom Rini
- [U-Boot] u-boot on beagleboard finds incorrect memory size.
Tom Rini
- [U-Boot] u-boot on beagleboard finds incorrect memory size.
Tom Rini
- [U-Boot] u-boot on beagleboard finds incorrect memory size.
Tom Rini
- [U-Boot] u-boot on beagleboard finds incorrect memory size.
Tom Rini
- [U-Boot] [UPDATED] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Tom Rini
- [U-Boot] u-boot on beagleboard finds incorrect memory size.
Tom Rini
- [U-Boot] Question regarding NAND environment
Tom Rini
- [U-Boot] Pull request: Davinci uboot
Tom Rini
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Tom Rini
- [U-Boot] [PATCH] omap_hsmmc: Wait for CMDI to be clear
Tom Rini
- [U-Boot] SPL Linux Boot
Tom Rini
- [U-Boot] Changes in uEnv.txt does not work
Tom Rini
- [U-Boot] [PATCH 1/2] SPL: Add YMODEM over UART load support
Tom Rini
- [U-Boot] [PATCH 2/2] SPL: Enable YMODEM support on BeagleBone and AM335x EVM
Tom Rini
- [U-Boot] bootm not taking dtb
JR Rivers
- [U-Boot] bootm not taking dtb
JR Rivers
- [U-Boot] bootm not taking dtb
JR Rivers
- [U-Boot] bootm not taking dtb
JR Rivers
- [U-Boot] [PATCH 0/4] use CFI driver for all MPL boards
Stefan Roese
- [U-Boot] [PATCH] ppc4xx: Setup HICB on Io64
Stefan Roese
- [U-Boot] Please pull u-boot-ppc4xx
Stefan Roese
- [U-Boot] [PATCH] nand_spl: store ecc data on the stack
Stefan Roese
- [U-Boot] [PATCH v2 0/9] Unified command execution in one place
Stefan Roese
- [U-Boot] [PATCH v2 0/9] Unified command execution in one place
Stefan Roese
- [U-Boot] Please pull u-boot-staging/sr at denx.de
Stefan Roese
- [U-Boot] [PATCH] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back
Stefan Roese
- [U-Boot] [PATCH] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back
Stefan Roese
- [U-Boot] Please pull u-boot-staging/sr at denx.de - UPDATE
Stefan Roese
- [U-Boot] [PATCH 05/15] common/main.c: Fix function readline
Pali Rohár
- [U-Boot] [PATCH 13/15] New board support: Nokia RX-51 aka N900
Pali Rohár
- [U-Boot] Bug in cfb_console driver
Pali Rohár
- [U-Boot] [PATCH] omap3: board.c - Fix compile warnings
Pali Rohár
- [U-Boot] [PATCH] omap3: board.c - Fix compile warnings
Pali Rohár
- [U-Boot] [PATCH 00/14] Nokia RX-51 support
Pali Rohár
- [U-Boot] [PATCH 01/14] arm, omap3: Define save_boot_params in lowlevel_init.S for SPL only
Pali Rohár
- [U-Boot] [PATCH 02/14] arm: Optionally use existing atags in bootm.c
Pali Rohár
- [U-Boot] [PATCH 03/14] Add power bus message definitions in twl4030.h
Pali Rohár
- [U-Boot] [PATCH 04/14] Fix function readline in main.c
Pali Rohár
- [U-Boot] [PATCH 05/14] cfb_console: Fix function console_scrollup
Pali Rohár
- [U-Boot] [PATCH 06/14] cfb_console: Add function console_clear and console_clear_line
Pali Rohár
- [U-Boot] [PATCH 07/14] cfb_console: Add functions for moving with cursor
Pali Rohár
- [U-Boot] [PATCH 08/14] cfb_console: Add support for some ANSI terminal escape codes
Pali Rohár
- [U-Boot] [PATCH 09/14] New command clear: Clear the ANSI terminal
Pali Rohár
- [U-Boot] [PATCH 10/14] New config variable CONFIG_MENUCMD
Pali Rohár
- [U-Boot] [PATCH 11/14] New config variable CONFIG_PREMONITOR
Pali Rohár
- [U-Boot] [PATCH 12/14] New board support: Nokia RX-51 aka N900
Pali Rohár
- [U-Boot] [PATCH 13/14] New command bootmenu: ANSI terminal Boot Menu support
Pali Rohár
- [U-Boot] [PATCH 14/14] RX-51: Add support for bootmenu
Pali Rohár
- [U-Boot] [PATCH 00/14] Nokia RX-51 support
Pali Rohár
- [U-Boot] [PATCH 00/14] Nokia RX-51 support
Pali Rohár
- [U-Boot] [PATCH 02/14] arm: Optionally use existing atags in bootm.c
Pali Rohár
- [U-Boot] [PATCH 03/14] Add power bus message definitions in twl4030.h
Pali Rohár
- [U-Boot] [PATCH 06/14] cfb_console: Add function console_clear and console_clear_line
Pali Rohár
- [U-Boot] [PATCH 09/14] New command clear: Clear the ANSI terminal
Pali Rohár
- [U-Boot] [PATCH 10/14] New config variable CONFIG_MENUCMD
Pali Rohár
- [U-Boot] [PATCH 11/14] New config variable CONFIG_PREMONITOR
Pali Rohár
- [U-Boot] [PATCH 13/14] New command bootmenu: ANSI terminal Boot Menu support
Pali Rohár
- [U-Boot] [PATCH 05/14] cfb_console: Fix function console_scrollup
Pali Rohár
- [U-Boot] [PATCH 02/14] arm: Optionally use existing atags in bootm.c
Pali Rohár
- [U-Boot] [PATCH 00/14] Nokia RX-51 support
Pali Rohár
- [U-Boot] [PATCH 11/14] New config variable CONFIG_PREMONITOR
Pali Rohár
- [U-Boot] [PATCH 02/14] arm: Optionally use existing atags in bootm.c
Pali Rohár
- [U-Boot] [PATCH 00/14] Nokia RX-51 support
Pali Rohár
- [U-Boot] [PATCH 11/14] New config variable CONFIG_PREMONITOR
Pali Rohár
- [U-Boot] [PATCH 02/14] arm: Optionally use existing atags in bootm.c
Pali Rohár
- [U-Boot] [PATCH 00/14] Nokia RX-51 support
Pali Rohár
- [U-Boot] [PATCH 10/14] New config variable CONFIG_MENUCMD
Pali Rohár
- [U-Boot] [PATCH 00/14] Nokia RX-51 support
Pali Rohár
- [U-Boot] OMAP3 performance regression in 2011.12
Måns Rullgård
- [U-Boot] [PATCH 00/17] x86: Rework of board init code (plus support patches)
Graeme Russ
- [U-Boot] [PATCH 01/17] x86: Import glibc memcpy implementation
Graeme Russ
- [U-Boot] [PATCH 02/17] x86: Speed up copy-to-RAM and clear BSS operations
Graeme Russ
- [U-Boot] [PATCH 03/17] x86: Remove GDR related magic numbers
Graeme Russ
- [U-Boot] [PATCH 04/17] x86: Rework Global Descriptor Table loading
Graeme Russ
- [U-Boot] [PATCH 05/17] x86: Simplify Flash-to-RAM code execution transition
Graeme Russ
- [U-Boot] [PATCH 06/17] x86: Rework relocation calcuations
Graeme Russ
- [U-Boot] [PATCH 07/17] x86: Use fs for global data
Graeme Russ
- [U-Boot] [PATCH 08/17] x86: Set GD_FLG_RELOC after entering in-RAM copy of U-Boot
Graeme Russ
- [U-Boot] [PATCH 09/17] x86: Create weak init_cache() function
Graeme Russ
- [U-Boot] [PATCH 10/17] x86: Allow cache before copy to RAM
Graeme Russ
- [U-Boot] [PATCH 11/17] CHECKPATCH: arch/x86/cpu/*
Graeme Russ
- [U-Boot] [PATCH 12/17] CHECKPATCH: arch/x86/lib/*
Graeme Russ
- [U-Boot] [PATCH 13/17] x86: Move do_go_exec() out of board.c
Graeme Russ
- [U-Boot] [PATCH 14/17] x86: Move setup_pcat_compatibility() out of board.c
Graeme Russ
- [U-Boot] [PATCH 15/17] x86: Move relocation code out of board.c
Graeme Russ
- [U-Boot] [PATCH 16/17] x86: Simplify board.c
Graeme Russ
- [U-Boot] [PATCH 17/17] x86: Tweak initialisation procedure
Graeme Russ
- [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it
Graeme Russ
- [U-Boot] initcall revisited - A new idea to discuss
Graeme Russ
- [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it
Graeme Russ
- [U-Boot] initcall revisited - A new idea to discuss
Graeme Russ
- [U-Boot] initcall revisited - A new idea to discuss
Graeme Russ
- [U-Boot] [PATCH 02/17] x86: Speed up copy-to-RAM and clear BSS operations
Graeme Russ
- [U-Boot] [PATCH 03/17] x86: Remove GDR related magic numbers
Graeme Russ
- [U-Boot] [PATCH 04/17] x86: Rework Global Descriptor Table loading
Graeme Russ
- [U-Boot] [PATCH 05/17] x86: Simplify Flash-to-RAM code execution transition
Graeme Russ
- [U-Boot] [PATCH 07/17] x86: Use fs for global data
Graeme Russ
- [U-Boot] [PATCH 09/17] x86: Create weak init_cache() function
Graeme Russ
- [U-Boot] [PATCH 10/17] x86: Allow cache before copy to RAM
Graeme Russ
- [U-Boot] [PATCH 11/17] CHECKPATCH: arch/x86/cpu/*
Graeme Russ
- [U-Boot] [PATCH 14/17] x86: Move setup_pcat_compatibility() out of board.c
Graeme Russ
- [U-Boot] [PATCH 16/17] x86: Simplify board.c
Graeme Russ
- [U-Boot] [PATCH 17/17] x86: Tweak initialisation procedure
Graeme Russ
- [U-Boot] [PATCH v2 01/17] x86: Import glibc memcpy implementation
Graeme Russ
- [U-Boot] [PATCH v2 02/17] x86: Speed up copy-to-RAM and clear BSS operations
Graeme Russ
- [U-Boot] [PATCH v2 03/17] x86: Remove GDR related magic numbers
Graeme Russ
- [U-Boot] [PATCH v2 04/17] x86: Rework Global Descriptor Table loading
Graeme Russ
- [U-Boot] [PATCH v2 05/17] x86: Simplify Flash-to-RAM code execution transition
Graeme Russ
- [U-Boot] [PATCH v2 06/17] x86: Rework relocation calculations
Graeme Russ
- [U-Boot] [PATCH v2 07/17] x86: Use fs for global data
Graeme Russ
- [U-Boot] [PATCH v2 08/17] x86: Set GD_FLG_RELOC after entering in-RAM copy of U-Boot
Graeme Russ
- [U-Boot] [PATCH v2 09/17] x86: Create weak init_cache() and default enable_caches() functions
Graeme Russ
- [U-Boot] [PATCH v2 10/17] x86: Allow cache before copy to RAM
Graeme Russ
- [U-Boot] [PATCH v2 11/17] x86: Tweak IDT and GDT for alignment and readability
Graeme Russ
- [U-Boot] [PATCH v2 12/17] CHECKPATCH: arch/x86/lib/*
Graeme Russ
- [U-Boot] [PATCH v2 13/17] x86: Move do_go_exec() out of board.c
Graeme Russ
- [U-Boot] [PATCH v2 14/17] x86: Move setup_pcat_compatibility() out of board.c
Graeme Russ
- [U-Boot] [PATCH v2 15/17] x86: Move relocation code out of board.c
Graeme Russ
- [U-Boot] [PATCH v2 16/17] x86: Split init functions out of board.c
Graeme Russ
- [U-Boot] [PATCH v2 17/17] x86: Convert board_init_f_r to a processing loop
Graeme Russ
- [U-Boot] [PATCH v2 02/17] x86: Speed up copy-to-RAM and clear BSS operations
Graeme Russ
- [U-Boot] initcall revisited - A new idea to discuss
Graeme Russ
- [U-Boot] initcall revisited - A new idea to discuss
Graeme Russ
- [U-Boot] [PATCH v2 15/17] x86: Move relocation code out of board.c
Graeme Russ
- [U-Boot] [PATCH v2 17/17] x86: Convert board_init_f_r to a processing loop
Graeme Russ
- [U-Boot] [RFC PATCH 01/19] Introduce generic global_data
Graeme Russ
- [U-Boot] initcall revisited - A new idea to discuss
Graeme Russ
- [U-Boot] [PATCH 00/14] Nokia RX-51 support
Graeme Russ
- [U-Boot] [PATCH 00/14] Nokia RX-51 support
Graeme Russ
- [U-Boot] [RFC Patch] e1000: Fix PCI memory addressing and fix for receive data polling
Ralf Rösch
- [U-Boot] [RFC Patch] e1000: Fix PCI memory addressing and fix for receive data polling
Ralf Rösch
- [U-Boot] [PATCH] mx28: fix clearing of IRQs in power init
Zach Sadecki
- [U-Boot] [PATCH] mx28: fix clearing of IRQs in power init
Zach Sadecki
- [U-Boot] [PATCH] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back
Zach Sadecki
- [U-Boot] [PATCH] add new board vl_ma2sc
Jens Scharsig
- [U-Boot] [PATCH] add new board vl_ma2sc
Jens Scharsig
- [U-Boot] [PATCH V2] add new board vl_ma2sc
Jens Scharsig
- [U-Boot] [PATCH 2/2] Changes to move hawkboard to the new infrastructure.
Heiko Schocher
- [U-Boot] [PATCH v3 1/7] drivers/i2c/omap24xx_i2c.c: replace printf with one argument by puts
Heiko Schocher
- [U-Boot] [PATCH v3 4/7] drivers/i2c/omap24xx_i2c.c: move all local variables to SRAM
Heiko Schocher
- [U-Boot] [PATCH 2/2 V2] Changes to move hawkboard to the new spl infrastructure.
Heiko Schocher
- [U-Boot] [RFC] [PATCH] DaVinci/i2c: allow multiple buses
Heiko Schocher
- [U-Boot] [PATCH I2C] fix: error ATMEL_FIO_BASE undeclared, if use I2C_Soft on AT91
Heiko Schocher
- [U-Boot] [GIT PULL] Pull request: i2c
Heiko Schocher
- [U-Boot] [PATCH] arm, davinci: Add support for the Calimain board from OMICRON electronics
Heiko Schocher
- [U-Boot] [PATCH 2/2 V2] Changes to move hawkboard to the new spl infrastructure.
Heiko Schocher
- [U-Boot] [PATCH] configs: Remove CONFIG_NET_MULTI from board files
Heiko Schocher
- [U-Boot] [PATCH 2/2 V4] Changes to move hawkboard to the new spl infrastructure
Heiko Schocher
- [U-Boot] [PATCH v2 0/7] tegra: Add I2C driver and associated parts
Heiko Schocher
- [U-Boot] [PATCH v2 3/7] tegra: fdt: Add extra I2C bindings for U-Boot
Heiko Schocher
- [U-Boot] [PATCH 4/7] tegra: Add I2C driver
Heiko Schocher
- [U-Boot] [PATCH v2 4/7] tegra: Add I2C driver
Heiko Schocher
- [U-Boot] [PATCH 7/7] tegra: Enable I2C on Seaboard
Heiko Schocher
- [U-Boot] [PATCH 1/3] ARM: I2C: I2C Multi byte address support
Heiko Schocher
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Heiko Schocher
- [U-Boot] [PATCH v2 4/7] tegra: Add I2C driver
Heiko Schocher
- [U-Boot] [PATCH 4/7] tegra: Add I2C driver
Heiko Schocher
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Heiko Schocher
- [U-Boot] [PATCH v2 18/20] tegra: i2c: Add function to find DVC bus
Heiko Schocher
- [U-Boot] [PATCH v2 02/20] i2c: Add TPS6586X driver
Heiko Schocher
- [U-Boot] [PATCH] arm, davinci: add workaround for not resetting DMA bus and VPSS modules
Heiko Schocher
- [U-Boot] [PATCH] arm, davinci: add timer defines for tcr field
Heiko Schocher
- [U-Boot] [PATCH] common, image: introduce new uimage types
Heiko Schocher
- [U-Boot] [PATCH 0/3] common, menu: enhancements
Heiko Schocher
- [U-Boot] [PATCH 1/3] common: add possibility for readline_into_buffer timeout
Heiko Schocher
- [U-Boot] [PATCH 2/3] common, menu: add statusline support
Heiko Schocher
- [U-Boot] [PATCH 3/3] common, menu: show menu on startup if CONFIG_MENU_SHOW is defined
Heiko Schocher
- [U-Boot] [PATCH] arm, davinci: cam_enc_4xx board updates
Heiko Schocher
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Heiko Schocher
- [U-Boot] [PATCH] common, image: introduce new uimage types
Heiko Schocher
- [U-Boot] [PATCH 1/3] common: add possibility for readline_into_buffer timeout
Heiko Schocher
- [U-Boot] [PATCH 2/3] common, menu: add statusline support
Heiko Schocher
- [U-Boot] [PATCH 3/3] common, menu: show menu on startup if CONFIG_MENU_SHOW is defined
Heiko Schocher
- [U-Boot] [PATCH] add new board vl_ma2sc
Heiko Schocher
- [U-Boot] [PATCH] common, image: introduce new uimage types
Heiko Schocher
- [U-Boot] [PATCH] add new board vl_ma2sc
Heiko Schocher
- [U-Boot] [PATCH] arm, davinci: cam_enc_4xx board updates
Heiko Schocher
- [U-Boot] [PATCH] arm, davinci: add PLL0 prediv to da850 lowlevel setup
Heiko Schocher
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Heiko Schocher
- [U-Boot] [PATCH 1/3 v2] common: add possibility for readline_into_buffer timeout
Heiko Schocher
- [U-Boot] [PATCH 2/3 v2] common, menu: add statusline support
Heiko Schocher
- [U-Boot] [PATCH 3/3 v2] common, menu: show menu on startup if CONFIG_MENU_SHOW is defined
Heiko Schocher
- [U-Boot] [PATCH v2] arm, davinci: cam_enc_4xx board updates
Heiko Schocher
- [U-Boot] [PATCH] common, menu: do not trigger timeout again, if a line is read
Heiko Schocher
- [U-Boot] [PATCH 0/3] Bring in new I2C framework
Heiko Schocher
- [U-Boot] [PATCH 3/3] WIP: tegra: i2c: Enable new I2C framework
Heiko Schocher
- [U-Boot] [PATCH 3/3 v3] common, menu: show menu on startup if CONFIG_MENU_SHOW is defined
Heiko Schocher
- [U-Boot] [PATCH] common, menu: do not trigger timeout again, if a line is read
Heiko Schocher
- [U-Boot] [PATCH v2] common, menu: do not timeout again if an item was selected but not found
Heiko Schocher
- [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support
Heiko Schocher
- [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support
Heiko Schocher
- [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support
Heiko Schocher
- [U-Boot] [PATCH v2 1/3] ARM: I2C: I2C Multi byte address support
Heiko Schocher
- [U-Boot] [PATCH v3 1/3] ARM: I2C: I2C Multi byte address support
Heiko Schocher
- [U-Boot] [PATCH v3 2/3] ARM: AM33XX: Add AM33XX I2C driver support
Heiko Schocher
- [U-Boot] [PATCH v3 3/3] ARM: AM33XX: Add i2c support
Heiko Schocher
- [U-Boot] [i2c] Pull request
Heiko Schocher
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Heiko Schocher
- [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding
Peter De Schrijver
- [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding
Peter De Schrijver
- [U-Boot] USBTTY for CONFIG_USB_GADGET
Michael Schwartz
- [U-Boot] [PATCH V12 04/14] devkit8000/spl: init GPMC for dm9000 in SPL
Simon Schwarz
- [U-Boot] [PATCH] arm: Add Prep subcommand support to bootm
Simon Schwarz
- [U-Boot] [PATCH v2] add nand spl boot for qi_lb60 board
Daniel Schwierzeck
- [U-Boot] Last version for AT91RM9200-DK
Digital Shadow
- [U-Boot] stuck after redirecting stdout to nc
Ran Shalit
- [U-Boot] stuck after redirecting stdout to nc
Ran Shalit
- [U-Boot] [PATCH] fat: reset VFAT short alias checksum on first match
Sergei Shtylyov
- [U-Boot] [PATCH v2 1/3] image: add support for Android's boot image format
Sebastian Andrzej Siewior
- [U-Boot] [PATCH v7] net: ll_temac: Add LL TEMAC driver to u-boot
Michal Simek
- [U-Boot] [PATCH v7] net: ll_temac: Add LL TEMAC driver to u-boot
Michal Simek
- [U-Boot] [PATCH 1/6] net: ll_temac: Add LL TEMAC driver to u-boot
Michal Simek
- [U-Boot] [PATCH 2/8] microblaze: Enable several ethernet driver compilation
Michal Simek
- [U-Boot] [PATCH 6/8] microblaze: Add faked LL_TEMAC driver configuration
Michal Simek
- [U-Boot] Uboot for PowerPC MPC8313
Ankur Singh
- [U-Boot] [u-boot]: Uboot for MPC8641D uboot getting hanged just before relocating to ram
Purva Singh
- [U-Boot] A Problem of u-boot on TI PandaBoard porting
Ira W. Snyder
- [U-Boot] [PATCH] [v2] powerpc/85xx: move the Fman microcode from ef000000 to eff40000
Timur Tabi
- [U-Boot] [PATCH] [v2] powerpc/85xx: move the Fman microcode from ef000000 to eff40000
Timur Tabi
- [U-Boot] [PATCH] [v2] powerpc/85xx: move the Fman microcode from ef000000 to eff40000
Timur Tabi
- [U-Boot] [GIT PULL] please pull u-boot-mpc85xx
Timur Tabi
- [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support
Timur Tabi
- [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support
Timur Tabi
- [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support
Timur Tabi
- [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support
Timur Tabi
- [U-Boot] [PATCH 2/8] powerpc/env: Correct the compilation errors when defined CONFIG_ENV_IS_NOWHERE
Tabi Timur-B04825
- [U-Boot] [PATCH 6/8] powerpc/boot: Slave uploads ucode when boot from SRIO
Tabi Timur-B04825
- [U-Boot] [PATCH 5/8] powerpc/boot: Slave module for boot from SRIO
Tabi Timur-B04825
- [U-Boot] [PATCH 5/8] powerpc/boot: Slave module for boot from SRIO
Tabi Timur-B04825
- [U-Boot] [GIT PULL] please pull u-boot-mpc85xx
Tabi Timur-B04825
- [U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support
Tabi Timur-B04825
- [U-Boot] [PATCH v3] Input: keyboard - add device tree bindings for simple key matrixes
Dmitry Torokhov
- [U-Boot] [PATCH v3] Input: keyboard - add device tree bindings for simple key matrixes
Dmitry Torokhov
- [U-Boot] [PATCH V12 08/14] Add cache functions to SPL for armv7
Aneesh V
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Aneesh V
- [U-Boot] [PATCH 1/2] image: add support for Android's boot image format
Aneesh V
- [U-Boot] OMAP3 performance regression in 2011.12
Aneesh V
- [U-Boot] OMAP3 performance regression in 2011.12
Aneesh V
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Aneesh V
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Aneesh V
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Aneesh V
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Aneesh V
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Aneesh V
- [U-Boot] [PATCH] M28EVK: Fix build if CONFIG_CMD_NAND not selected
Marek Vasut
- [U-Boot] [PATCH] Change kernel address in dataflash to match u-boot's size
Marek Vasut
- [U-Boot] [PATCH] fw_env: use vars from the board config
Marek Vasut
- [U-Boot] [PATCH] fw_env: use vars from the board config
Marek Vasut
- [U-Boot] [PATCH] MX28: Fix MXSBOOT segfault if no params specified
Marek Vasut
- [U-Boot] [PATCH] MXS-NAND: Backport ecc.size from linux kernel
Marek Vasut
- [U-Boot] User Question
Marek Vasut
- [U-Boot] [PATCH] MXS-NAND: Backport ecc.size from linux kernel
Marek Vasut
- [U-Boot] M28 U-Boot config
Marek Vasut
- [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL
Marek Vasut
- [U-Boot] SMSC 9215 MII mode
Marek Vasut
- [U-Boot] [PATCH] NAND: remove NAND_MAX_CHIPS definitions
Marek Vasut
- [U-Boot] Parameter restriction in mxsboot tool
Marek Vasut
- [U-Boot] Possible Denx m28evk ethernet problem + solution
Marek Vasut
- [U-Boot] Possible Denx m28evk ethernet problem + solution
Marek Vasut
- [U-Boot] Possible Denx m28evk ethernet problem + solution
Marek Vasut
- [U-Boot] [PATCH 01/14] Add AES crypto library
Marek Vasut
- [U-Boot] [PATCH 01/14] Add AES crypto library
Marek Vasut
- [U-Boot] Possible Denx m28evk ethernet problem + solution
Marek Vasut
- [U-Boot] Possible Denx m28evk ethernet problem + solution
Marek Vasut
- [U-Boot] [PATCH 4/7] tegra: Add I2C driver
Marek Vasut
- [U-Boot] [PATCH 1/4] PXA: PXA27x Matrix keypad driver
Marek Vasut
- [U-Boot] [PATCH 2/4] zipitz2: enable pxa27x_mkp driver
Marek Vasut
- [U-Boot] [PATCH 3/4] zipitz2: use pxa_mmc_gen as MMC driver
Marek Vasut
- [U-Boot] [PATCH 4/4] zipitz2: fix boot issue introduced by PXA low level init rework
Marek Vasut
- [U-Boot] [PATCH] USB: fix USB keyboard polling parameter
Marek Vasut
- [U-Boot] [PATCH] USB: fix USB keyboard polling parameter
Marek Vasut
- [U-Boot] [PATCH] eth: remove usb-ethernet devices before re-enumerating them
Marek Vasut
- [U-Boot] [PATCH] mx28: fix clearing of IRQs in power init
Marek Vasut
- [U-Boot] [PATCH] usb: add numeric keypad support to HID driver
Marek Vasut
- [U-Boot] [PATCH] eth: remove usb-ethernet devices before re-enumerating them
Marek Vasut
- [U-Boot] [PATCH] M28EVK: Fix build if CONFIG_CMD_NAND not selected
Marek Vasut
- [U-Boot] [PATCH] M28EVK: Fix build if CONFIG_CMD_NAND not selected
Marek Vasut
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Marek Vasut
- [U-Boot] [PATCH 1/3] m28evk: Remove CONFIG_NET_MULTI option
Marek Vasut
- [U-Boot] [PATCH v2 2/3] efika: Remove CONFIG_NET_MULTI option
Marek Vasut
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Marek Vasut
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Marek Vasut
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Marek Vasut
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Marek Vasut
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Marek Vasut
- [U-Boot] [PATCH] configs: Remove CONFIG_NET_MULTI from board files
Marek Vasut
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Marek Vasut
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Marek Vasut
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Marek Vasut
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Marek Vasut
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Marek Vasut
- [U-Boot] [PATCH v2 1/4] ehci-omap: Clean up added ehci-omap.c
Marek Vasut
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Marek Vasut
- [U-Boot] Help needed on Colibri T20 - Iris Board
Marek Vasut
- [U-Boot] [PATCH] skat91: add support for SK-AT91SAM9/SIM508 board
Marek Vasut
- [U-Boot] [PATCH 1/3 v6] arm926ejs: add NXP LPC32x0 cpu series support
Marek Vasut
- [U-Boot] [PATCH 2/3] serial: add LPC32X0 high-speed UART devices support
Marek Vasut
- [U-Boot] [PATCH 3/3 v3] devkit3250: add Timll DevKit3250 board initial support
Marek Vasut
- [U-Boot] [PATCH] skat91: add support for SK-AT91SAM9/SIM508 board
Marek Vasut
- [U-Boot] [PATCH 3/3 v3] devkit3250: add Timll DevKit3250 board initial support
Marek Vasut
- [U-Boot] [PATCH v2 4/4] zipitz2: fix boot issue introduced by PXA low level init rework
Marek Vasut
- [U-Boot] [PATCH v2 1/4] PXA: PXA27x Matrix keypad driver
Marek Vasut
- [U-Boot] [PATCH v2 3/4] zipitz2: use pxa_mmc_gen as MMC driver
Marek Vasut
- [U-Boot] [PATCH v2 2/4] zipitz2: enable pxa27x_mkp driver
Marek Vasut
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Marek Vasut
- [U-Boot] [PATCH 1/3 v7] arm926ejs: add NXP LPC32x0 cpu series support
Marek Vasut
- [U-Boot] [PATCH 2/3 v2] serial: add LPC32X0 high-speed UART devices support
Marek Vasut
- [U-Boot] [PATCH 3/3 v4] devkit3250: add Timll DevKit3250 board initial support
Marek Vasut
- [U-Boot] [PATCH 1/3 v7] arm926ejs: add NXP LPC32x0 cpu series support
Marek Vasut
- [U-Boot] [PATCH 1/2] SPI: Add i.MX ECSPI driver
Marek Vasut
- [U-Boot] [PATCH 2/2] i.mx6q: SabreLite: Add SPI NOR support
Marek Vasut
- [U-Boot] [PATCH 1/2] SPI: Add i.MX ECSPI driver
Marek Vasut
- [U-Boot] [PATCH v3 3/4] zipitz2: use pxa_mmc_gen as MMC driver
Marek Vasut
- [U-Boot] [PATCH v3 4/4] zipitz2: fix boot issue introduced by PXA low level init rework
Marek Vasut
- [U-Boot] [PATCH v3 1/4] PXA: PXA27x Matrix keypad driver
Marek Vasut
- [U-Boot] [PATCH 1/5] net: fec_mxc: Add 1000 Mbps selection
Marek Vasut
- [U-Boot] [PATCH 3/5] miiphyutil: Add Micrel KSZ9021 support to miiphy_speed
Marek Vasut
- [U-Boot] [PATCH 4/5] net: fec_mxc: Nove autonegoatiate restart after mii_postcall
Marek Vasut
- [U-Boot] [PATCH 1/3 v8] arm926ejs: add NXP LPC32x0 cpu series support
Marek Vasut
- [U-Boot] [PATCH 2/3 v3] serial: add LPC32X0 high-speed UART devices support
Marek Vasut
- [U-Boot] [PATCH 3/3 v5] devkit3250: add Timll DevKit3250 board initial support
Marek Vasut
- [U-Boot] mx28evk_config integration
Marek Vasut
- [U-Boot] mx28evk_config integration
Marek Vasut
- [U-Boot] [PATCH v3 3/4] zipitz2: use pxa_mmc_gen as MMC driver
Marek Vasut
- [U-Boot] [PATCH v3 1/4] PXA: PXA27x Matrix keypad driver
Marek Vasut
- [U-Boot] [PATCH] mx28: fix i.MX28 spi driver
Marek Vasut
- [U-Boot] [PATCH] omap3: board.c - Fix compile warnings
Marek Vasut
- [U-Boot] [PATCH] omap3: board.c - Fix compile warnings
Marek Vasut
- [U-Boot] [PATCH v4 1/3] PXA: PXA27x Matrix keypad driver
Marek Vasut
- [U-Boot] [PATCH v4 3/3] zipitz2: use pxa_mmc_gen as MMC driver
Marek Vasut
- [U-Boot] [PATCH] omap3: board.c - Fix compile warnings
Marek Vasut
- [U-Boot] [PATCH] omap3: board.c - Fix compile warnings
Marek Vasut
- [U-Boot] SPI Test
Marek Vasut
- [U-Boot] SPI Test
Marek Vasut
- [U-Boot] mxc_spi refactoring (for mx6q)
Marek Vasut
- [U-Boot] [PATCH 2/6] mx6q: Add support for ECSPI through mxc_spi driver
Marek Vasut
- [U-Boot] [PATCH 2/6] mx6q: Add support for ECSPI through mxc_spi driver
Marek Vasut
- [U-Boot] [PATCH 2/6] mx6q: Add support for ECSPI through mxc_spi driver
Marek Vasut
- [U-Boot] [PATCH 3/3] mx28evk: add SPI support
Marek Vasut
- [U-Boot] [PATCH 1/3] mx28evk: add RTC support
Marek Vasut
- [U-Boot] [PATCH 2/6] mx6q: Add support for ECSPI through mxc_spi driver
Marek Vasut
- [U-Boot] [PATCH 3/3] mx28evk: add SPI support
Marek Vasut
- [U-Boot] [PATCH 1/3] mx28evk: add RTC support
Marek Vasut
- [U-Boot] [PATCH] mx28: Show CPU frequency
Marek Vasut
- [U-Boot] [PATCH] mx28: Show CPU frequency
Marek Vasut
- [U-Boot] [PATCH] mx28: fix i.MX28 spi driver
Marek Vasut
- [U-Boot] [RFC] mx28: Fix reboot from the kernel
Marek Vasut
- [U-Boot] [PATCH v5 1/3] PXA: PXA27x Matrix keypad driver
Marek Vasut
- [U-Boot] [RFC] mx28: Fix reboot from the kernel
Marek Vasut
- [U-Boot] [RFC] mx28: Fix reboot from the kernel
Marek Vasut
- [U-Boot] mx28 spl power cpu clock configuration
Marek Vasut
- [U-Boot] mx28 spl power cpu clock configuration
Marek Vasut
- [U-Boot] mx28 spl power cpu clock configuration
Marek Vasut
- [U-Boot] [U-Boot-Users] cross compiler
Marek Vasut
- [U-Boot] [PATCH] TRATS: Fix uart gpio config
Marek Vasut
- [U-Boot] mx28 spl power cpu clock configuration
Marek Vasut
- [U-Boot] Last version for AT91RM9200-DK
Marek Vasut
- [U-Boot] u-boot-atmel support for SMSC9514
Marek Vasut
- [U-Boot] non SPL boot on beagleboard-xm
Marek Vasut
- [U-Boot] [PATCH 00/14] Nokia RX-51 support
Marek Vasut
- [U-Boot] [PATCH 01/14] arm, omap3: Define save_boot_params in lowlevel_init.S for SPL only
Marek Vasut
- [U-Boot] [PATCH 02/14] arm: Optionally use existing atags in bootm.c
Marek Vasut
- [U-Boot] [PATCH 03/14] Add power bus message definitions in twl4030.h
Marek Vasut
- [U-Boot] [PATCH 04/14] Fix function readline in main.c
Marek Vasut
- [U-Boot] [PATCH 05/14] cfb_console: Fix function console_scrollup
Marek Vasut
- [U-Boot] [PATCH 06/14] cfb_console: Add function console_clear and console_clear_line
Marek Vasut
- [U-Boot] [PATCH 09/14] New command clear: Clear the ANSI terminal
Marek Vasut
- [U-Boot] [PATCH 10/14] New config variable CONFIG_MENUCMD
Marek Vasut
- [U-Boot] [PATCH 11/14] New config variable CONFIG_PREMONITOR
Marek Vasut
- [U-Boot] [PATCH 13/14] New command bootmenu: ANSI terminal Boot Menu support
Marek Vasut
- [U-Boot] [PATCH 00/14] Nokia RX-51 support
Marek Vasut
- [U-Boot] [PATCH 11/14] New config variable CONFIG_PREMONITOR
Marek Vasut
- [U-Boot] [PATCH 10/14] New config variable CONFIG_MENUCMD
Marek Vasut
- [U-Boot] [PATCH 09/14] New command clear: Clear the ANSI terminal
Marek Vasut
- [U-Boot] [PATCH 06/14] cfb_console: Add function console_clear and console_clear_line
Marek Vasut
- [U-Boot] [PATCH 02/14] arm: Optionally use existing atags in bootm.c
Marek Vasut
- [U-Boot] [PATCH 00/14] Nokia RX-51 support
Marek Vasut
- [U-Boot] [PATCH v6 1/3] PXA: PXA27x Matrix keypad driver
Marek Vasut
- [U-Boot] [PATCH 11/14] New config variable CONFIG_PREMONITOR
Marek Vasut
- [U-Boot] [PATCH 02/14] arm: Optionally use existing atags in bootm.c
Marek Vasut
- [U-Boot] [PATCH 00/14] Nokia RX-51 support
Marek Vasut
- [U-Boot] [PATCH v6 1/3] PXA: PXA27x Matrix keypad driver
Marek Vasut
- [U-Boot] [PATCH 02/14] arm: Optionally use existing atags in bootm.c
Marek Vasut
- [U-Boot] [PATCH 00/14] Nokia RX-51 support
Marek Vasut
- [U-Boot] [PATCH 11/14] New config variable CONFIG_PREMONITOR
Marek Vasut
- [U-Boot] [PATCH 00/14] Nokia RX-51 support
Marek Vasut
- [U-Boot] [PATCH 00/14] Nokia RX-51 support
Marek Vasut
- [U-Boot] mx28 spl power cpu clock configuration
Marek Vasut
- [U-Boot] mx28 spl power cpu clock configuration
Marek Vasut
- [U-Boot] [PATCH V4 1/7] mxc_spi: move machine specifics into CPU headers
Marek Vasut
- [U-Boot] [PATCH V4 5/7] README: Add description of SPI Flash (SF) command configuration
Marek Vasut
- [U-Boot] [PATCH V4 6/7] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select
Marek Vasut
- [U-Boot] [PATCH V4 6/7] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select
Marek Vasut
- [U-Boot] [PATCH V4 6/7] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select
Marek Vasut
- [U-Boot] [PATCH V4 6/7] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select
Marek Vasut
- [U-Boot] [PATCH V4 6/7] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select
Marek Vasut
- [U-Boot] mx28 spl power cpu clock configuration
Marek Vasut
- [U-Boot] mx28 spl power cpu clock configuration
Marek Vasut
- [U-Boot] [PATCH] i.MX28: Fix VDDIO and VDDA setup
Marek Vasut
- [U-Boot] [PATCH] i.MX28: Make the stabilization delays shorter
Marek Vasut
- [U-Boot] [PATCH] i.MX28: Fix VDDIO and VDDA setup
Marek Vasut
- [U-Boot] [PATCH] i.MX28: Fix VDDIO and VDDA setup
Marek Vasut
- [U-Boot] [PATCH] i.MX28: Fix VDDIO and VDDA setup
Marek Vasut
- [U-Boot] [PATCH] i.MX28: Fix VDDIO and VDDA setup
Marek Vasut
- [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
James W.
- [U-Boot] [PATCH] kirkwood_spi: correct access to irq_mask register
Prafulla Wadaskar
- [U-Boot] [PATCH 0/4] Add USB support to orion5x and edminiv2
Prafulla Wadaskar
- [U-Boot] [PATCH] edminiv2: add hush parser and long help
Prafulla Wadaskar
- [U-Boot] [PATCH 0/4] Add USB support to orion5x and edminiv2
Prafulla Wadaskar
- [U-Boot] [PATCH 1/3] USB: Armada100: Add UTMI PHY interface driver
Prafulla Wadaskar
- [U-Boot] [PATCH 2/3] USB: Armada100: ECHI Driver for Armada100 SOCs
Prafulla Wadaskar
- [U-Boot] [PATCH 3/3] Armada100: gplugD: Add USB command support
Prafulla Wadaskar
- [U-Boot] [PATCHv2 1/8] Strip mkenvimage
David Wagner
- [U-Boot] [PATCHv3 2/8] mkenvimage: correct and clarify comments and error messages
David Wagner
- [U-Boot] [PATCHv3 3/8] mkenvimage: Correct the includes and add a missing one
David Wagner
- [U-Boot] [PATCHv2 4/8] mkenvimage: More error handling
David Wagner
- [U-Boot] [PATCHv3 5/8] mkenvimage: Read/Write from/to stdin/out by default or if the filename is "-"
David Wagner
- [U-Boot] [PATCHv2 6/8] mkenvimage: Use mmap() when reading from a regular file
David Wagner
- [U-Boot] [PATCHv2 7/8] mkenvimage: Don't try to detect comments in the input file
David Wagner
- [U-Boot] [PATCHv3 8/8] mkenvimage: Really set the redundant byte when applicable
David Wagner
- [U-Boot] [PATCHv3 5/8] mkenvimage: Read/Write from/to stdin/out by default or if the filename is "-"
David Wagner
- [U-Boot] [PATCHv4 3/8] mkenvimage: Correct an include and add a missing one
David Wagner
- [U-Boot] [PATCHv3 6/8] mkenvimage: Use mmap() when reading from a regular file
David Wagner
- [U-Boot] [PATCHv3 4/8] mkenvimage: More error handling
David Wagner
- [U-Boot] [PATCHv4 4/8] mkenvimage: More error handling
David Wagner
- [U-Boot] [PATCH 0/9] mkenvimage: v10/v11 diff split into several patches
David Wagner
- [U-Boot] [PATCHv5 1/7] mkenvimage: correct and clarify comments and error messages
David Wagner
- [U-Boot] [PATCHv5 2/7] mkenvimage: Correct an include and add a missing one
David Wagner
- [U-Boot] [PATCHv5 3/7] mkenvimage: More error handling
David Wagner
- [U-Boot] [PATCHv5 4/7] mkenvimage: Read/Write from/to stdin/out by default or if the filename is "-"
David Wagner
- [U-Boot] [PATCHv5 5/7] mkenvimage: Use mmap() when reading from a regular file
David Wagner
- [U-Boot] [PATCHv5 6/7] mkenvimage: Don't try to detect comments in the input file
David Wagner
- [U-Boot] [PATCHv5 7/7] mkenvimage: Really set the redundant byte when applicable
David Wagner
- [U-Boot] [PATCH] arm, arm-kirkwood: disable l2c before linux boot
Michael Walle
- [U-Boot] [PATCH] kirkwood_spi: fix setting of irq mask
Michael Walle
- [U-Boot] [PATCH] lsxl: add support for lschlv2 and lsxhl
Michael Walle
- [U-Boot] [PATCH] lsxl: add support for lschlv2 and lsxhl
Michael Walle
- [U-Boot] [PATCH] lsxl: add support for lschlv2 and lsxhl
Michael Walle
- [U-Boot] [PATCH] lsxl: add support for lschlv2 and lsxhl
Michael Walle
- [U-Boot] [PATCH] lsxl: add support for lschlv2 and lsxhl
Michael Walle
- [U-Boot] [PATCH] lsxl: add support for lschlv2 and lsxhl
Michael Walle
- [U-Boot] [PATCH] lsxl: add support for lschlv2 and lsxhl
Michael Walle
- [U-Boot] [PATCH] cmd_source: introduce run_script()
Michael Walle
- [U-Boot] [PATCH] cmd_source: introduce run_script()
Michael Walle
- [U-Boot] [PATCH] cmd_source: introduce run_script()
Michael Walle
- [U-Boot] [PATCH] cmd_source: introduce run_script()
Michael Walle
- [U-Boot] [PATCH v2] arm, arm-kirkwood: disable l2c before linux boot
Michael Walle
- [U-Boot] [PATCH v2] arm, arm-kirkwood: disable l2c before linux boot
Michael Walle
- [U-Boot] [PATCH v2] main: unify command parsing functions
Michael Walle
- [U-Boot] [PATCH v2] main: unify command parsing functions
Michael Walle
- [U-Boot] [PATCH v2] main: unify command parsing functions
Michael Walle
- [U-Boot] [PATCH v4 4/9] Stop using builtin_run_command()
Michael Walle
- [U-Boot] [PATCH v2] arm, arm-kirkwood: disable l2c before linux boot
Michael Walle
- [U-Boot] [PATCH] integrator: stop calling pci_init() twice
Linus Walleij
- [U-Boot] [PATCH] integrator: rewrite the AP PCI driver
Linus Walleij
- [U-Boot] [PATCH] integrator: rewrite the AP PCI driver
Linus Walleij
- [U-Boot] [PATCH] integrator: update the Integrator/CP config
Linus Walleij
- [U-Boot] [PATCH 1/2] tegra2: Always build with USE_PRIVATE_LIBGCC=yes.
Stephen Warren
- [U-Boot] [PATCH 1/2] tegra2: Always build with USE_PRIVATE_LIBGCC=yes.
Stephen Warren
- [U-Boot] [PATCH 1/2] tegra2: Always build with USE_PRIVATE_LIBGCC=yes.
Stephen Warren
- [U-Boot] [PATCH 1/3] tegra2: Fix conflicting pinmux for UARTA
Stephen Warren
- [U-Boot] [PATCH 2/3] tegra2: Fix default RAM size selection in odmdata
Stephen Warren
- [U-Boot] [PATCH 3/3] tegra2: Add support for Compal Paz00 (Toshiba AC100)
Stephen Warren
- [U-Boot] [PATCH] ns16550: tegra: Specify debugging serial port at boot.
Stephen Warren
- [U-Boot] [RFC PATCH v2 27/28] tegra: Mark board init files for ARMv4t
Stephen Warren
- [U-Boot] [PATCH 3/3] tegra2: Add support for Compal Paz00 (Toshiba AC100)
Stephen Warren
- [U-Boot] [PATCH 3/3] tegra2: Add support for Compal Paz00 (Toshiba AC100)
Stephen Warren
- [U-Boot] [PATCH 3/3] tegra2: Add support for Compal Paz00 (Toshiba AC100)
Stephen Warren
- [U-Boot] [PATCH 1/7] tegra: Rename NV_PA_PMC_BASE to TEGRA2_PMC_BASE
Stephen Warren
- [U-Boot] [PATCH 3/7] tegra: Add I2C support to funcmux
Stephen Warren
- [U-Boot] [PATCH 6/7] tegra: Select I2C ordering for Seaboard
Stephen Warren
- [U-Boot] [PATCH 7/7] tegra: Enable I2C on Seaboard
Stephen Warren
- [U-Boot] [PATCH 4/7] tegra: Add I2C driver
Stephen Warren
- [U-Boot] [PATCH 0/7] tegra: Enhance funcmux to support I2C and MMC
Stephen Warren
- [U-Boot] [PATCH 05/14] tegra: Add tegra_get_chip_type() to detect SKU
Stephen Warren
- [U-Boot] [PATCH 06/14] tegra: Add EMC support for optimal memory timings
Stephen Warren
- [U-Boot] [PATCH 0/7] tegra: Enhance funcmux to support I2C and MMC
Stephen Warren
- [U-Boot] [PATCH 07/14] tegra: Add PMU to manage power supplies
Stephen Warren
- [U-Boot] [PATCH 08/14] tegra: Set up PMU for Nvidia boards
Stephen Warren
- [U-Boot] [PATCH 09/14] tegra: Add warmboot implementation
Stephen Warren
- [U-Boot] [PATCH 12/14] tegra: Set vdd_core and vdd_cpu to high
Stephen Warren
- [U-Boot] [PATCH 13/14] tegra: Add EMC settings for Seaboard, Harmony
Stephen Warren
- [U-Boot] [RFC PATCH 1/2] fdt: Add fdtdec_find_aliases() to deal with alias nodes
Stephen Warren
- [U-Boot] [RFC PATCH 1/2] fdt: Add fdtdec_find_aliases() to deal with alias nodes
Stephen Warren
- [U-Boot] [PATCH v2] tegra: mmc: Support operation with dcache enabled
Stephen Warren
- [U-Boot] [PATCH v3] tegra2: Enable data cache
Stephen Warren
- [U-Boot] [PATCH v2 0/7] tegra: Enhance funcmux to support I2C and MMC
Stephen Warren
- [U-Boot] [PATCH 4/7] tegra: Add I2C driver
Stephen Warren
- [U-Boot] [PATCH 7/7] tegra: Enable I2C on Seaboard
Stephen Warren
- [U-Boot] [PATCH 05/14] tegra: Add tegra_get_chip_type() to detect SKU
Stephen Warren
- [U-Boot] [PATCH 13/14] tegra: Add EMC settings for Seaboard, Harmony
Stephen Warren
- [U-Boot] [PATCH 07/14] tegra: Add PMU to manage power supplies
Stephen Warren
- [U-Boot] [PATCH 13/14] tegra: Add EMC settings for Seaboard, Harmony
Stephen Warren
- [U-Boot] [PATCH 13/14] tegra: Add EMC settings for Seaboard, Harmony
Stephen Warren
- [U-Boot] [PATCH v2 1/2] fdt: Add fdtdec_find_aliases() to deal with alias nodes
Stephen Warren
- [U-Boot] [PATCH v2 2/2] fdt: Add tests for fdtdec
Stephen Warren
- [U-Boot] [PATCH 09/14] tegra: Add warmboot implementation
Stephen Warren
- [U-Boot] [PATCH v4 01/20] fdt: Tidy up a few fdtdec problems
Stephen Warren
- [U-Boot] [PATCH v4 02/20] fdt: Add functions to access phandles, arrays and bools
Stephen Warren
- [U-Boot] [PATCH v4 03/20] fdt: Add basic support for decoding GPIO definitions
Stephen Warren
- [U-Boot] [PATCH v4 06/20] tegra: fdt: Add Tegra2x device tree file from kernel
Stephen Warren
- [U-Boot] [PATCH v4 07/20] tegra: fdt: Add device tree file for Tegra2 Seaboard from kernel
Stephen Warren
- [U-Boot] [PATCH v4 08/20] fdt: Add staging area for device tree binding documentation
Stephen Warren
- [U-Boot] [PATCH v4 10/20] tegra: fdt: Add additional USB binding
Stephen Warren
- [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding
Stephen Warren
- [U-Boot] [PATCH v4 12/20] tegra: usb: fdt: Add additional device tree definitions for USB ports
Stephen Warren
- [U-Boot] [PATCH v4 17/20] tegra: usb: Add USB support to nvidia boards
Stephen Warren
- [U-Boot] [PATCH v4 16/20] tegra: usb: Add support for Tegra USB peripheral
Stephen Warren
- [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding
Stephen Warren
- [U-Boot] [PATCH v4 10/20] tegra: fdt: Add additional USB binding
Stephen Warren
- [U-Boot] [PATCH v2 2/7] fdt: Add function to allow aliases to refer to multiple nodes
Stephen Warren
- [U-Boot] [PATCH v2 3/7] tegra: fdt: Add extra I2C bindings for U-Boot
Stephen Warren
- [U-Boot] [PATCH v2 6/7] tegra: Select I2C ordering for Seaboard
Stephen Warren
- [U-Boot] [PATCH v2 4/7] tegra: Add I2C driver
Stephen Warren
- [U-Boot] [PATCH v2 08/20] tegra: Add tegra_get_chip_type() to detect SKU
Stephen Warren
- [U-Boot] [PATCH v2 09/20] tegra: Add EMC support for optimal memory timings
Stephen Warren
- [U-Boot] [PATCH v2 12/20] tegra: Add warmboot implementation
Stephen Warren
- [U-Boot] [PATCH v2 20/20] tegra: Enable LP0 on Seaboard
Stephen Warren
- [U-Boot] [PATCH 2/6] tegra: Add NAND support to funcmux
Stephen Warren
- [U-Boot] [PATCH v4 06/20] tegra: fdt: Add Tegra2x device tree file from kernel
Stephen Warren
- [U-Boot] [PATCH v2 09/20] tegra: Add EMC support for optimal memory timings
Stephen Warren
- [U-Boot] [PATCH v2 2/7] fdt: Add function to allow aliases to refer to multiple nodes
Stephen Warren
- [U-Boot] [PATCH 3/6] tegra: fdt: Add NAND controller binding and definitions
Stephen Warren
- [U-Boot] [PATCH 5/6] tegra: nand: Add Tegra NAND driver
Stephen Warren
- [U-Boot] [PATCH v3 4/9] tegra: Add keyboard support to funcmux
Stephen Warren
- [U-Boot] [PATCH v3 5/9] tegra: fdt: Add keyboard controller definition
Stephen Warren
- [U-Boot] [PATCH v3 7/9] tegra: Add tegra keyboard driver
Stephen Warren
- [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding
Stephen Warren
- [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding
Stephen Warren
- [U-Boot] [PATCH v4 03/20] fdt: Add basic support for decoding GPIO definitions
Stephen Warren
- [U-Boot] [PATCH v2 3/7] tegra: fdt: Add extra I2C bindings for U-Boot
Stephen Warren
- [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding
Stephen Warren
- [U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding
Stephen Warren
- [U-Boot] [PATCH v4 03/20] fdt: Add basic support for decoding GPIO definitions
Stephen Warren
- [U-Boot] [PATCH 1/2] ARM: tegra: Define Tegra20 CAR binding
Stephen Warren
- [U-Boot] [PATCH 2/2] ARM: tegra: Add clock binding to tegra-seabaord.dts
Stephen Warren
- [U-Boot] [PATCH 1/2] ARM: tegra: Define Tegra20 CAR binding
Stephen Warren
- [U-Boot] [PATCH 1/2] tegra2: Always build with USE_PRIVATE_LIBGCC=yes.
Tom Warren
- [U-Boot] pull request: u-boot-tegra/master
Tom Warren
- [U-Boot] fdt patches for Tegra
Tom Warren
- [U-Boot] pull request: u-boot-tegra/master
Tom Warren
- [U-Boot] [PATCH resend] OMAP3: Remove unused define CONFIG_OMAP3_*_DDR
Thomas Weber
- [U-Boot] [PATCH] Remove execute permissions from source files
Thomas Weber
- [U-Boot] [PATCH v4 1/5] ARM:AM33XX: Replace CONFIG_AM335X with CONFIG_AM33XX
Thomas Weber
- [U-Boot] [PATCHv2] OMAP3: Add Corscience Tricorder board
Thomas Weber
- [U-Boot] [PATCH] nand_util: correct YAFFS image write function
Lei Wen
- [U-Boot] 4k page ONFI NAND
Scott Wood
- [U-Boot] [PATCH] MXS-NAND: Backport ecc.size from linux kernel
Scott Wood
- [U-Boot] [PATCH 3/3] mtd/nand : workaround for Freescale FCM to support large-page Nand chip
Scott Wood
- [U-Boot] [PATCH 3/3] mtd/nand : workaround for Freescale FCM to support large-page Nand chip
Scott Wood
- [U-Boot] [PATCH] cmd_nand: add biterror insertion command for NAND Flash
Scott Wood
- [U-Boot] [PATCH 2/2] mtd/nand: Fix IFC driver to support 2K NAND page
Scott Wood
- [U-Boot] [PATCH 1/2] mtd/nand:Fix wrong address read in is_blank()
Scott Wood
- [U-Boot] add nand spl boot for qi_lb60 board
Scott Wood
- [U-Boot] add nand spl boot for qi_lb60 board
Scott Wood
- [U-Boot] [PATCH] mpc8313erdb: fix mtdparts address
Scott Wood
- [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL
Scott Wood
- [U-Boot] add nand spl boot for qi_lb60 board
Scott Wood
- [U-Boot] [PATCH] cmd_nand: add biterror insertion command for NAND Flash
Scott Wood
- [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL
Scott Wood
- [U-Boot] [PATCH V5] nand_spl_simple: store ecc data on the stack
Scott Wood
- [U-Boot] [PATCH] MAKEALL: display SPL size if present
Scott Wood
- [U-Boot] [PATCH] NAND: remove NAND_MAX_CHIPS definitions
Scott Wood
- [U-Boot] [PATCH] NAND: Remove additional (CONFIG_SYS)_NAND_MAX_CHIPS
Scott Wood
- [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL
Scott Wood
- [U-Boot] add nand spl boot for qi_lb60 board
Scott Wood
- [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL
Scott Wood
- [U-Boot] [PATCH v2] add nand spl boot for qi_lb60 board
Scott Wood
- [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL
Scott Wood
- [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL
Scott Wood
- [U-Boot] [PATCH v2] add nand spl boot for qi_lb60 board
Scott Wood
- [U-Boot] [PATCH V4] nand_spl_simple: store ecc data on the stack
Scott Wood
- [U-Boot] [PATCH v2 1/8] nand: Merge BCH code from Linux nand driver
Scott Wood
- [U-Boot] [PATCH v2 2/8] nand: Add more NAND types from Linux nand driver
Scott Wood
- [U-Boot] [PATCH v2 3/8] nand: cleanup whitespace
Scott Wood
- [U-Boot] [PATCH v2 4/8] nand: Merge changes from Linux nand driver
Scott Wood
- [U-Boot] [PATCH v2 6/8] nand: Merge changes to BBT from Linux nand driver
Scott Wood
- [U-Boot] [PATCH v2 7/8] nand: Sanitize ONFI strings.
Scott Wood
- [U-Boot] [PATCH 4/5 v2] mtd/nand: Add ONFI support for FSL NAND controller
Scott Wood
- [U-Boot] [PATCH] nand_spl: store ecc data on the stack
Scott Wood
- [U-Boot] [PATCH 1/2] nand: Introduce CONFIG_SYS_NAND_SELF_INIT
Scott Wood
- [U-Boot] [PATCH 2/2] nand/fsl_elbc: Convert to self-init
Scott Wood
- [U-Boot] [PATCH 2/2] nand/fsl_elbc: Convert to self-init
Scott Wood
- [U-Boot] [PATCH 2/2] nand/fsl_elbc: Convert to self-init
Scott Wood
- [U-Boot] [PATCH 2/2] nand/fsl_elbc: Convert to self-init
Scott Wood
- [U-Boot] [PATCH] nand_util: correct YAFFS image write function
Scott Wood
- [U-Boot] [PATCH 5/6] tegra: nand: Add Tegra NAND driver
Scott Wood
- [U-Boot] SPL Framework: Add support for U_BOOT_CMD
Scott Wood
- [U-Boot] Question regarding NAND environment
Scott Wood
- [U-Boot] Pull request: nand flash
Scott Wood
- [U-Boot] Question regarding NAND environment
Scott Wood
- [U-Boot] OMAP3 performance regression in 2011.12
Joe Woodward
- [U-Boot] OMAP3 performance regression in 2011.12
Joe Woodward
- [U-Boot] OMAP3 performance regression in 2011.12
Joe Woodward
- [U-Boot] OMAP3 performance regression in 2011.12
Joe Woodward
- [U-Boot] [PATCH V4] AT91: pio: Add PIO3 features
Hong Xu
- [U-Boot] [PATCH] am3517evm: remove rootfstype kernel parameter for MMC boot device
Yegor Yefremov
- [U-Boot] [PATCH 0/3] devkit3250: add Timll DevKit3250 board initial support
Vladimir Zapolskiy
- [U-Boot] [PATCH 1/3 v6] arm926ejs: add NXP LPC32x0 cpu series support
Vladimir Zapolskiy
- [U-Boot] [PATCH 2/3] serial: add LPC32X0 high-speed UART devices support
Vladimir Zapolskiy
- [U-Boot] [PATCH 3/3 v3] devkit3250: add Timll DevKit3250 board initial support
Vladimir Zapolskiy
- [U-Boot] [PATCH] skat91: add support for SK-AT91SAM9/SIM508 board
Vladimir Zapolskiy
- [U-Boot] [PATCH] skat91: add support for SK-AT91SAM9/SIM508 board
Vladimir Zapolskiy
- [U-Boot] [PATCH 3/3 v3] devkit3250: add Timll DevKit3250 board initial support
Vladimir Zapolskiy
- [U-Boot] [PATCH 3/3 v3] devkit3250: add Timll DevKit3250 board initial support
Vladimir Zapolskiy
- [U-Boot] [PATCH v2] skat91: add support for SK-AT91SAM9/SIM508 board
Vladimir Zapolskiy
- [U-Boot] [PATCH 0/3 v2] devkit3250: add Timll DevKit3250 board initial support
Vladimir Zapolskiy
- [U-Boot] [PATCH 1/3 v7] arm926ejs: add NXP LPC32x0 cpu series support
Vladimir Zapolskiy
- [U-Boot] [PATCH 2/3 v2] serial: add LPC32X0 high-speed UART devices support
Vladimir Zapolskiy
- [U-Boot] [PATCH 3/3 v4] devkit3250: add Timll DevKit3250 board initial support
Vladimir Zapolskiy
- [U-Boot] [PATCH 2/3 v2] serial: add LPC32X0 high-speed UART devices support
Vladimir Zapolskiy
- [U-Boot] [PATCH 3/3 v4] devkit3250: add Timll DevKit3250 board initial support
Vladimir Zapolskiy
- [U-Boot] [PATCH 1/3 v7] arm926ejs: add NXP LPC32x0 cpu series support
Vladimir Zapolskiy
- [U-Boot] [PATCH 0/3 v3] devkit3250: add Timll DevKit3250 board initial support
Vladimir Zapolskiy
- [U-Boot] [PATCH 1/3 v8] arm926ejs: add NXP LPC32x0 cpu series support
Vladimir Zapolskiy
- [U-Boot] [PATCH 2/3 v3] serial: add LPC32X0 high-speed UART devices support
Vladimir Zapolskiy
- [U-Boot] [PATCH 3/3 v5] devkit3250: add Timll DevKit3250 board initial support
Vladimir Zapolskiy
- [U-Boot] compile the u-boot
Jilin Zhou
- [U-Boot] compile the u-boot
Jilin Zhou
- [U-Boot] Porting board from FSL to mainline U-Boot
stefano babic
- [U-Boot] [PATCH V12 02/14] devki8000: add config for spl command
stefano babic
- [U-Boot] A Problem of u-boot on TI PandaBoard porting
Qiao.HelloWorld at gmail.com
- [U-Boot] A Problem of u-boot on TI PandaBoard porting
Qiao.HelloWorld at gmail.com
- [U-Boot] A Problem of u-boot on TI PandaBoard porting
Qiao.HelloWorld at gmail.com
- [U-Boot] device tree compilation problems.
hanumant
- [U-Boot] serial : Device tree support for multiple serial devices.
hanumant
- [U-Boot] serial : Device tree support for multiple serial devices.
hanumant
- [U-Boot] How to make a u-boot that supports a particular board.
jagan
- [U-Boot] uboot configuration for uImage
manish kanchan
- [U-Boot] changes in uEnv.txt does not work
manish kanchan
- [U-Boot] uboot configuration for uImage
manishdkanchan
- [U-Boot] Changes in uEnv.txt does not work
manishdkanchan
- [U-Boot] Changes in uEnv.txt does not work
manishdkanchan
- [U-Boot] Add ext4 write support
uma.shankar at samsung.com
- [U-Boot] [PATCH V4 0/2] *** Add ext4 filesystem support in uboot ***
uma.shankar at samsung.com
- [U-Boot] [PATCH V4 1/2] ext4fs ls load support
uma.shankar at samsung.com
- [U-Boot] [PATCH V4 2/2] ext4fs write support
uma.shankar at samsung.com
- [U-Boot] [u-boot]
periyasamy samy
- [U-Boot] [U-Boot-Users]
periyasamy samy
- [U-Boot] [U-Boot-Users] cross compiler
periyasamy samy
- [U-Boot] [U-Boot-Users]-compilation error
periyasamy samy
- [U-Boot] stuck after redirecting stdout to nc
ran shalit
- [U-Boot] [RFC] CDC Ethernet support + USB Gadget in U-boot
subhashini
- [U-Boot] Regarding HUSH support in uboot
amruth vamadev
- [U-Boot] Regarding HUSH support in uboot
amruth vamadev
- [U-Boot] Memory testing of flash
vk
- [U-Boot] flash post test
vk
- [U-Boot] u-boot on beagleboard finds incorrect memory size.
wilsonjonathan
- [U-Boot] u-boot on beagleboard finds incorrect memory size.
wilsonjonathan
- [U-Boot] u-boot on beagleboard finds incorrect memory size.
wilsonjonathan
- [U-Boot] u-boot on beagleboard finds incorrect memory size.
wilsonjonathan
- [U-Boot] u-boot on beagleboard finds incorrect memory size.
wilsonjonathan
- [U-Boot] u-boot on beagleboard finds incorrect memory size.
wilsonjonathan
- [U-Boot] u-boot on beagleboard finds incorrect memory size.
wilsonjonathan
- [U-Boot] I want to recommend a good website to you
mike zenon
- [U-Boot] expection for help with ethernet driver for DP83849
黄金明
Last message date:
Tue Jan 31 23:49:37 CET 2012
Archived on: Tue Jan 31 23:49:44 CET 2012
This archive was generated by
Pipermail 0.09 (Mailman edition).