[U-Boot] NAND boot looks broken on P1020RDB

[Aggrwal Poonam-B10812]

Hello Felix

NAND boot must use DDR for P1020RDB. Infact it is DDR for P2020RDB also as per implementation.
We need to change the CONFIG_SYS_TEXT_BASE to 0x11001000 as shown below for NAND boot in include/configs/P1_P2_RDB.h

#ifdef CONFIG_NAND_SPL
#define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE_SPL
#else
#define CONFIG_SYS_TEXT_BASE            0x11001000
#endif /* CONFIG_NAND_SPL */
#endif

Looks like we missed to push this change, I will send a patch for this.

Regards
Poonam

> -----Original Message-----
> From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
> On Behalf Of Felix Radensky
> Sent: Monday, January 02, 2012 11:28 AM
> To: U-Boot-Denx; Aggrwal Poonam-B10812; Kumar Gala
> Subject: [U-Boot] NAND boot looks broken on P1020RDB
> 
> Hi,
> 
> NAND boot implementation for P2020RDB/P1020RDB first copies u-boot to L2
> SRAM, and then to DDR. This works for P2020, where
> L2 size is 512K, but breaks on P1020, where L2 size is 256K. Looks like
> NAND SPL for these platforms should not rely on L2 cache, and copy u-boot
> directly into DDR.
> 
> Felix.
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot