[U-Boot] [PATCH] [v2] powerpc/85xx: move the Fman microcode from ef000000 to eff40000

[Timur Tabi]

On some Freescale reference boards for SOCs with Fman devices, the Fman
microcode is located at address 0xEF000000 in NOR flash.  Unfortunately,
this address is in the "middle of nowhere" and makes it difficult to
partition flash space for other images.

So we change the expected address to 0xEFF40000, which is the flash
sector adjacent to the environment.

Signed-off-by: Timur Tabi <timur at freescale.com>
---
 include/configs/P1023RDS.h   |    2 +-
 include/configs/P2041RDB.h   |    2 +-
 include/configs/corenet_ds.h |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h
index e057b1f..54f4dd4 100644
--- a/include/configs/P1023RDS.h
+++ b/include/configs/P1023RDS.h
@@ -527,7 +527,7 @@ extern unsigned long get_clock_freq(void);
 /* Default address of microcode for the Linux Fman driver */
 /* QE microcode/firmware address */
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#define CONFIG_SYS_QE_FMAN_FW_ADDR	0xEF000000
+#define CONFIG_SYS_QE_FMAN_FW_ADDR	0xEFF40000
 #else
 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 #define CONFIG_SYS_QE_FMAN_FW_ADDR	0x1f00000
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index a48055e..bc177d0 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -429,7 +429,7 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_QE_FMAN_FW_ADDR	(6 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #else
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#define CONFIG_SYS_QE_FMAN_FW_ADDR	0xEF000000
+#define CONFIG_SYS_QE_FMAN_FW_ADDR	0xEFF40000
 #endif
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 7925b95..e03d318 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -493,7 +493,7 @@
 #define CONFIG_SYS_QE_FMAN_FW_ADDR	(6 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #else
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#define CONFIG_SYS_QE_FMAN_FW_ADDR		0xEF000000
+#define CONFIG_SYS_QE_FMAN_FW_ADDR		0xEFF40000
 #endif
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
-- 
1.7.3.4