[U-Boot] [PATCH V3 3/6] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform

Eric Nelson eric.nelson at boundarydevices.com
Tue Jan 24 17:18:21 CET 2012


Signed-off-by: Eric Nelson <eric.nelson at boundarydevices.com>
Acked-by: Dirk Behme <dirk.behme at de.bosch.com> 
Acked-by: Stefano Babic <sbabic at denx.de>
---
 board/freescale/mx6qsabrelite/imximage.cfg    |    2 +-
 board/freescale/mx6qsabrelite/mx6qsabrelite.c |   25 +++++++++++++++++++++++++
 include/configs/mx6qsabrelite.h               |    9 +++++++++
 3 files changed, 35 insertions(+), 1 deletions(-)

diff --git a/board/freescale/mx6qsabrelite/imximage.cfg b/board/freescale/mx6qsabrelite/imximage.cfg
index b4ff010..fa40bff 100644
--- a/board/freescale/mx6qsabrelite/imximage.cfg
+++ b/board/freescale/mx6qsabrelite/imximage.cfg
@@ -156,7 +156,7 @@ DATA 4 0x021b0404 0x00011006
 
 # set the default clock gate to save power
 DATA 4 0x020c4068 0x00C03F3F
-DATA 4 0x020c406c 0x0030FC00
+DATA 4 0x020c406c 0x0030FC03
 DATA 4 0x020c4070 0x0FFFC000
 DATA 4 0x020c4074 0x3FF00000
 DATA 4 0x020c4078 0x00FFF300
diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
index a0b648f..2ba6b0c 100644
--- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
+++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
@@ -46,6 +46,10 @@ DECLARE_GLOBAL_DATA_PTR;
 	PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED   |		\
 	PAD_CTL_DSE_40ohm   | PAD_CTL_HYS)
 
+#define SPI_PAD_CTRL (PAD_CTL_HYS |				\
+	PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED |		\
+	PAD_CTL_DSE_40ohm     | PAD_CTL_SRE_FAST)
+
 int dram_init(void)
 {
 	gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
@@ -193,6 +197,23 @@ int board_mmc_init(bd_t *bis)
 }
 #endif
 
+#ifdef CONFIG_MXC_SPI
+iomux_v3_cfg_t ecspi1_pads[] = {
+	/* SS1 */
+	MX6Q_PAD_EIM_D19__GPIO_3_19   | MUX_PAD_CTRL(SPI_PAD_CTRL),
+	MX6Q_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
+	MX6Q_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
+	MX6Q_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
+};
+
+void setup_spi(void)
+{
+	gpio_direction_output(IMX_GPIO_NR(3, 19), 1);
+	imx_iomux_v3_setup_multiple_pads(ecspi1_pads,
+					 ARRAY_SIZE(ecspi1_pads));
+}
+#endif
+
 #define MII_1000BASET_CTRL		0x9
 #define MII_EXTENDED_CTRL		0xb
 #define MII_EXTENDED_DATAW		0xc
@@ -250,6 +271,10 @@ int board_early_init_f(void)
 {
 	setup_iomux_uart();
 
+#ifdef CONFIG_MXC_SPI
+	setup_spi();
+#endif
+
 	return 0;
 }
 
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index 034fc40..8dd6e39 100644
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -44,6 +44,15 @@
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART2_BASE
 
+#define CONFIG_CMD_SF
+#ifdef CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SST
+#define CONFIG_MXC_SPI
+#define CONFIG_SF_DEFAULT_SPEED 25000000
+#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
+#endif
+
 /* MMC Configs */
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_USDHC
-- 
1.7.1



More information about the U-Boot mailing list