[U-Boot] [PATCH 8/8 v2] powerpc/corenet_ds: Slave core in holdoff when boot from SRIO
Liu Gang
Gang.Liu at freescale.com
Tue Jan 17 10:09:09 CET 2012
When boot from SRIO, slave's core can be in holdoff after powered on for
some specific requirements. Master can release the slave's core at the
right time by SRIO interface.
Master needs to:
1. Set outbound SRIO windows in order to configure slave's registers
for the core's releasing.
2. Check the SRIO port status when release slave core, if no errors,
will implement the process of the slave core's releasing.
Slave needs to:
1. Set all the cores in holdoff by RCW.
2. Be powered on before master's boot.
Signed-off-by: Liu Gang <Gang.Liu at freescale.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie at freescale.com>
---
Changes in v2:
- Subject changed to "powerpc/corenet_ds".
- Use "(void *)" instead of "(u32)" when calling "out_be32()".
- Use "NOR flash" instead of "Nor flash".
- Get rid of the base address + offset notation. Use C structs
instead.
- Get rid of hard coded magic numbers. Use macro instead.
- Use "debug()" instead of "printf()".
arch/powerpc/cpu/mpc85xx/cpu_init.c | 3 +
arch/powerpc/cpu/mpc8xxx/srio.c | 126 +++++++++++++++++++++++++++++++++++
arch/powerpc/include/asm/fsl_srio.h | 3 +
include/configs/corenet_ds.h | 4 +
4 files changed, 136 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 97a7fe1..2cd5db7 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -444,6 +444,9 @@ skip_l2:
srio_init();
#ifdef CONFIG_SRIOBOOT_MASTER
srio_boot_master();
+#ifdef CONFIG_SRIOBOOT_SLAVE_HOLDOFF
+ srio_boot_master_release_slave();
+#endif
#endif
#endif
diff --git a/arch/powerpc/cpu/mpc8xxx/srio.c b/arch/powerpc/cpu/mpc8xxx/srio.c
index 5694561..e132c69 100644
--- a/arch/powerpc/cpu/mpc8xxx/srio.c
+++ b/arch/powerpc/cpu/mpc8xxx/srio.c
@@ -25,6 +25,12 @@
#define SRIO_PORT_ACCEPT_ALL 0x10000001
#define SRIO_IB_ATMU_AR 0x80f55000
+#define SRIO_OB_ATMU_AR_MAINT 0x80077000
+#define SRIO_OB_ATMU_AR_RW 0x80045000
+#define SRIO_LCSBA1CSR_OFFSET 0x5c
+#define SRIO_MAINT_WIN_SIZE 0x1000000 /* 16M */
+#define SRIO_RW_WIN_SIZE 0x100000 /* 1M */
+#define SRIO_LCSBA1CSR 0x60000000
#if defined(CONFIG_FSL_CORENET)
#define _DEVDISR_SRIO1 FSL_CORENET_DEVDISR_SRIO1
@@ -168,4 +174,124 @@ void srio_boot_master(void)
SRIO_IB_ATMU_AR
| atmu_size_mask(CONFIG_SRIOBOOT_SLAVE_ENV_SIZE));
}
+
+#ifdef CONFIG_SRIOBOOT_SLAVE_HOLDOFF
+void srio_boot_master_release_slave(void)
+{
+ struct ccsr_rio *srio = (void *)CONFIG_SYS_FSL_SRIO_ADDR;
+ u32 escsr;
+ u32 addr;
+ debug("SRIOBOOT - MASTER: "
+ "Check the port status and release slave core ...\n");
+
+ escsr = in_be32((void *)&srio->lp_serial
+ .port[CONFIG_SRIOBOOT_MASTER_PORT].pescsr);
+ if (escsr & 0x2) {
+ if (escsr & 0x10100) {
+ debug("SRIOBOOT - MASTER: Port [ %d ] is error.\n",
+ CONFIG_SRIOBOOT_MASTER_PORT);
+ } else {
+ debug("SRIOBOOT - MASTER: "
+ "Port [ %d ] is ready, now release slave's core ...\n",
+ CONFIG_SRIOBOOT_MASTER_PORT);
+ /*
+ * configure outbound window
+ * with maintenance attribute to set slave's LCSBA1CSR
+ */
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[1].rowtar, 0);
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[1].rowtear, 0);
+ if (CONFIG_SRIOBOOT_MASTER_PORT)
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[1].rowbar,
+ CONFIG_SYS_SRIO2_MEM_PHYS >> 12);
+ else
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[1].rowbar,
+ CONFIG_SYS_SRIO1_MEM_PHYS >> 12);
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[1].rowar,
+ SRIO_OB_ATMU_AR_MAINT
+ | atmu_size_mask(SRIO_MAINT_WIN_SIZE));
+
+ /*
+ * configure outbound window
+ * with R/W attribute to set slave's BRR
+ */
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[2].rowtar,
+ SRIO_LCSBA1CSR >> 9);
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[2].rowtear, 0);
+ if (CONFIG_SRIOBOOT_MASTER_PORT)
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[2].rowbar,
+ (CONFIG_SYS_SRIO2_MEM_PHYS
+ + SRIO_MAINT_WIN_SIZE) >> 12);
+ else
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[2].rowbar,
+ (CONFIG_SYS_SRIO1_MEM_PHYS
+ + SRIO_MAINT_WIN_SIZE) >> 12);
+ out_be32((void *)&srio->atmu
+ .port[CONFIG_SRIOBOOT_MASTER_PORT]
+ .outbw[2].rowar,
+ SRIO_OB_ATMU_AR_RW
+ | atmu_size_mask(SRIO_RW_WIN_SIZE));
+
+ /*
+ * Set the LCSBA1CSR register in slave
+ * by the maint-outbound window
+ */
+ if (CONFIG_SRIOBOOT_MASTER_PORT) {
+ out_be32(CONFIG_SYS_SRIO2_MEM_VIRT
+ + SRIO_LCSBA1CSR_OFFSET,
+ SRIO_LCSBA1CSR);
+ while (in_be32(CONFIG_SYS_SRIO2_MEM_VIRT
+ + SRIO_LCSBA1CSR_OFFSET)
+ != SRIO_LCSBA1CSR)
+ ;
+ /*
+ * And then set the BRR register
+ * to release slave core
+ */
+ out_be32(CONFIG_SYS_SRIO2_MEM_VIRT
+ + SRIO_MAINT_WIN_SIZE
+ + CONFIG_SRIOBOOT_SLAVE_BRR_OFFSET,
+ CONFIG_SRIOBOOT_SLAVE_RELEASE_MASK);
+ } else {
+ out_be32(CONFIG_SYS_SRIO1_MEM_VIRT
+ + SRIO_LCSBA1CSR_OFFSET,
+ SRIO_LCSBA1CSR);
+ while (in_be32(CONFIG_SYS_SRIO1_MEM_VIRT
+ + SRIO_LCSBA1CSR_OFFSET)
+ != SRIO_LCSBA1CSR)
+ ;
+ /*
+ * And then set the BRR register
+ * to release slave core
+ */
+ out_be32(CONFIG_SYS_SRIO1_MEM_VIRT
+ + SRIO_MAINT_WIN_SIZE
+ + CONFIG_SRIOBOOT_SLAVE_BRR_OFFSET,
+ CONFIG_SRIOBOOT_SLAVE_RELEASE_MASK);
+ }
+ debug("SRIOBOOT - MASTER: "
+ "Release slave successfully! Now the slave should start up!\n");
+ }
+ } else
+ debug("SRIOBOOT - MASTER: Port [ %d ] is not ready.\n",
+ CONFIG_SRIOBOOT_MASTER_PORT);
+}
+#endif
#endif
diff --git a/arch/powerpc/include/asm/fsl_srio.h b/arch/powerpc/include/asm/fsl_srio.h
index e4cd9b6..a905a26 100644
--- a/arch/powerpc/include/asm/fsl_srio.h
+++ b/arch/powerpc/include/asm/fsl_srio.h
@@ -57,5 +57,8 @@ enum atmu_size {
extern void srio_init(void);
#ifdef CONFIG_SRIOBOOT_MASTER
extern void srio_boot_master(void);
+#ifdef CONFIG_SRIOBOOT_SLAVE_HOLDOFF
+extern void srio_boot_master_release_slave(void);
+#endif
#endif
#endif
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index fe53625..6344342 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -418,6 +418,10 @@
#define CONFIG_SRIOBOOT_SLAVE_ENV_LAW_PHYS 0xfef060000ull
#define CONFIG_SRIOBOOT_SLAVE_ENV_SRIO_PHYS 0x3ffe20000ull
#define CONFIG_SRIOBOOT_SLAVE_ENV_SIZE 0x20000 /* 128K */
+/* slave core release by master*/
+#define CONFIG_SRIOBOOT_SLAVE_HOLDOFF
+#define CONFIG_SRIOBOOT_SLAVE_BRR_OFFSET 0xe00e4
+#define CONFIG_SRIOBOOT_SLAVE_RELEASE_MASK 0x00000001 /* release core 0 */
#endif
/*
--
1.7.3.1
More information about the U-Boot
mailing list