[U-Boot] [PATCH] TRATS: Fix uart gpio config

[Minkyu Kang]

Dear Chander Kashyap,

On 25 January 2012 14:25, Chander Kashyap <chander.kashyap at linaro.org> wrote:
> It updates the missing gpio configuration of UART port.
>
> Signed-off-by: Chander Kashyap <chander.kashyap at linaro.org>
> Cc: HeungJun, Kim <riverful.kim at samsung.com>
> ---
>  board/samsung/trats/trats.c |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
> index f795ff0..4c9773d 100644
> --- a/board/samsung/trats/trats.c
> +++ b/board/samsung/trats/trats.c
> @@ -337,7 +337,7 @@ static void board_uart_init(void)
>        int i;
>
>        /* UART0-UART1 GPIOs (part1) : 0x22222222 */
> -       for (i = 0; i < 7; i++) {
> +       for (i = 0; i < 8; i++) {
>                s5p_gpio_set_pull(&gpio1->a0, i, GPIO_PULL_NONE);
>                s5p_gpio_cfg_pin(&gpio1->a0, i, GPIO_FUNC(0x2));
>        }
> @@ -347,7 +347,7 @@ static void board_uart_init(void)
>         * GPA1CON[3] = I2C_3_SCL (3)
>         * GPA1CON[2] = I2C_3_SDA (3)
>         */
> -       for (i = 0; i < 5; i++) {
> +       for (i = 0; i < 6; i++) {
>                s5p_gpio_set_pull(&gpio1->a1, i, GPIO_PULL_NONE);
>                s5p_gpio_cfg_pin(&gpio1->a1, i,
>                                GPIO_FUNC((i == 2 || i == 3) ? 0x3 : 0x2));
> --

Actually we don't have to set all of UARTs.
Because, we only use UART2 for serial.
I will post new patch for it.

Thanks
Minkyu Kang.
-- 
from. prom.
www.promsoft.net