[U-Boot] [PATCH] arm, davinci: add PLL0 prediv to da850 lowlevel setup

[Christian Riesch]

Hello Ben,

On Mon, Jan 16, 2012 at 6:43 PM, Ben Gardiner
<bengardiner at nanometrics.ca> wrote:
> The OMAP-L138 has a pre-divider available on PLL0.
>
> Add support to da850_lowlevel.c for configuring PLL0's pre-divider. This is
> to achieve certain OPP's -- e.g. the 372MHz OPP used also by Linux.

I noticed that that pre-divider configuration was missing while
working on the lowlevel setup, but then I forgot to add it (and I was
fine with the default)... Thank you for adding it!

Acked-by: Christian Riesch <christian.riesch at omicron.at>

Regards, Christian