[U-Boot] [PATCH v3] tegra2: Enable data cache

Simon Glass sjg at chromium.org
Tue Jan 10 00:22:15 CET 2012


This enables the data cache on Tegra2 boards.

As discussed on the list, this is better off in the Tegra2 cpu code than in a
particular vendor directory. We should be safe turning on the cache for all
Tegra2 boards.

Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v2:
- Enable caches for all Tegra2 boards instead of just Nvidia ones

Changes in v3:
- Rebase against master

 arch/arm/cpu/armv7/tegra2/board.c |    8 ++++++++
 1 files changed, 8 insertions(+), 0 deletions(-)

diff --git a/arch/arm/cpu/armv7/tegra2/board.c b/arch/arm/cpu/armv7/tegra2/board.c
index 8b9e895..38497f1 100644
--- a/arch/arm/cpu/armv7/tegra2/board.c
+++ b/arch/arm/cpu/armv7/tegra2/board.c
@@ -141,3 +141,11 @@ void board_init_uart_f(void)
 #endif
 	setup_uarts(uart_ids);
 }
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+}
+#endif
-- 
1.7.3.1



More information about the U-Boot mailing list