[U-Boot] [PATCH 0/4] Add USB support to orion5x and edminiv2

[Albert ARIBAUD]

Hi Prafulla,

Le 16/01/2012 09:32, Prafulla Wadaskar a écrit :
>
>
>> -----Original Message-----
>> From: Albert ARIBAUD [mailto:albert.u.boot at aribaud.net]
>> Sent: 16 January 2012 14:00
>> To: Prafulla Wadaskar
>> Cc: u-boot at lists.denx.de
>> Subject: Re: [U-Boot] [PATCH 0/4] Add USB support to orion5x and
>> edminiv2
>>
>> Hi Prafulla,
>>
>> Le 16/01/2012 09:20, Prafulla Wadaskar a écrit :
>>>
>>>
>>>> -----Original Message-----
>>>> From: u-boot-bounces at lists.denx.de [mailto:u-boot-
>>>> bounces at lists.denx.de] On Behalf Of Albert ARIBAUD
>>>> Sent: 16 January 2012 13:39
>>>> To: u-boot at lists.denx.de
>>>> Subject: [U-Boot] [PATCH 0/4] Add USB support to orion5x and
>> edminiv2
>>>>
>>>> This patch set adds USB support to the LaCie ED Mini V2 by renaming
>>>> the 'kirkwood' USB driver a 'marvell' USB driver, sharing it
>> between
>>>> the orion5x SoC family and enabling it for the edminiv2 board.
>>>>
>>>> (this is similar to what was done with the 'mvgbe' driver in
>> commits
>>>> 9b6bcdcb to ab9164d0)
>>>
>>> Hi Albert
>>> This is patch series tested on both the platforms- Kirkwood, Orion
>> for this change?
>>>
>>> Otherwise,
>>> Acked-by: Prafulla Wadaskar<Prafulla at marvell.com>
>>>
>>> Regards..
>>> Prafulla . ..
>>
>> For kirkwood the code is just a bunch of renames with no functional
>> impact, but I did test the patch set on kirkwood for build-time and
>> run-time regressions while developing it.
>>
>> However, since then I have rebased it a couple of times, and my
>> openrd-client is currently not available for testing again. Could you
>> possibly test it?
>
> Okay I will do it in next week is that okay with you?

Don't bother: I've been lent another open-rd and I could run the u-boot 
image through openocd during lunch break. I've just tested usb start, 
usb tree with a mass storage USB key plugged in, usb info, usb part) and 
all works fine.

> Regards..
> Prafulla . .

Amicalement,
-- 
Albert.