[U-Boot] [PATCH 0/4] Add USB support to orion5x and edminiv2

[Prafulla Wadaskar]

> -----Original Message-----
> From: Albert ARIBAUD [mailto:albert.u.boot at aribaud.net]
> Sent: 16 January 2012 14:00
> To: Prafulla Wadaskar
> Cc: u-boot at lists.denx.de
> Subject: Re: [U-Boot] [PATCH 0/4] Add USB support to orion5x and
> edminiv2
> 
> Hi Prafulla,
> 
> Le 16/01/2012 09:20, Prafulla Wadaskar a écrit :
> >
> >
> >> -----Original Message-----
> >> From: u-boot-bounces at lists.denx.de [mailto:u-boot-
> >> bounces at lists.denx.de] On Behalf Of Albert ARIBAUD
> >> Sent: 16 January 2012 13:39
> >> To: u-boot at lists.denx.de
> >> Subject: [U-Boot] [PATCH 0/4] Add USB support to orion5x and
> edminiv2
> >>
> >> This patch set adds USB support to the LaCie ED Mini V2 by renaming
> >> the 'kirkwood' USB driver a 'marvell' USB driver, sharing it
> between
> >> the orion5x SoC family and enabling it for the edminiv2 board.
> >>
> >> (this is similar to what was done with the 'mvgbe' driver in
> commits
> >> 9b6bcdcb to ab9164d0)
> >
> > Hi Albert
> > This is patch series tested on both the platforms- Kirkwood, Orion
> for this change?
> >
> > Otherwise,
> > Acked-by: Prafulla Wadaskar<Prafulla at marvell.com>
> >
> > Regards..
> > Prafulla . ..
> 
> For kirkwood the code is just a bunch of renames with no functional
> impact, but I did test the patch set on kirkwood for build-time and
> run-time regressions while developing it.
> 
> However, since then I have rebased it a couple of times, and my
> openrd-client is currently not available for testing again. Could you
> possibly test it?

Okay I will do it in next week is that okay with you?

Regards..
Prafulla . .

> 
> Amicalement,
> --
> Albert.