[U-Boot] [PATCH 0/4] Add USB support to orion5x and edminiv2

[Albert ARIBAUD]

Hi Prafulla,

Le 16/01/2012 09:20, Prafulla Wadaskar a écrit :
>
>
>> -----Original Message-----
>> From: u-boot-bounces at lists.denx.de [mailto:u-boot-
>> bounces at lists.denx.de] On Behalf Of Albert ARIBAUD
>> Sent: 16 January 2012 13:39
>> To: u-boot at lists.denx.de
>> Subject: [U-Boot] [PATCH 0/4] Add USB support to orion5x and edminiv2
>>
>> This patch set adds USB support to the LaCie ED Mini V2 by renaming
>> the 'kirkwood' USB driver a 'marvell' USB driver, sharing it between
>> the orion5x SoC family and enabling it for the edminiv2 board.
>>
>> (this is similar to what was done with the 'mvgbe' driver in commits
>> 9b6bcdcb to ab9164d0)
>
> Hi Albert
> This is patch series tested on both the platforms- Kirkwood, Orion for this change?
>
> Otherwise,
> Acked-by: Prafulla Wadaskar<Prafulla at marvell.com>
>
> Regards..
> Prafulla . ..

For kirkwood the code is just a bunch of renames with no functional 
impact, but I did test the patch set on kirkwood for build-time and 
run-time regressions while developing it.

However, since then I have rebased it a couple of times, and my 
openrd-client is currently not available for testing again. Could you 
possibly test it?

Amicalement,
-- 
Albert.