[U-Boot] [PATCH 5/5] microblaze: Add faked LL_TEMAC driver configuration

[Stephan Linz]

Expand the specific configuration for the microblaze-generic
board in xparameters.h with a faked setup to enable the
LL_TEMAC driver.

Note: From now the microblaze-generic board is no longer a
valid board configuration for a real piece of hardware. Rather
than, we use the file config.mk and xparameters.h as a faked
board configuration to force the compilation of all potential
driver code for Microblaze systems.

Signed-off-by: Stephan Linz <linz at li-pro.net>
---
 board/xilinx/microblaze-generic/config.mk     |    6 ++++--
 board/xilinx/microblaze-generic/xparameters.h |   12 ++++++++++--
 2 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/board/xilinx/microblaze-generic/config.mk b/board/xilinx/microblaze-generic/config.mk
index f8d7e26..9fd1015 100644
--- a/board/xilinx/microblaze-generic/config.mk
+++ b/board/xilinx/microblaze-generic/config.mk
@@ -21,8 +21,10 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 # MA 02111-1307 USA
 #
-# CAUTION: This file is automatically generated by libgen.
-# Version: Xilinx EDK 6.3 EDK_Gmm.12.3
+# CAUTION: This file is a faked configuration !!!
+#          There is no real target for the microblaze-generic
+#          configuration. You have to replace this file with
+#          the generated file from your Xilinx design flow.
 #
 
 CONFIG_SYS_TEXT_BASE = 0x29000000
diff --git a/board/xilinx/microblaze-generic/xparameters.h b/board/xilinx/microblaze-generic/xparameters.h
index fae03bf..fcbd55e 100644
--- a/board/xilinx/microblaze-generic/xparameters.h
+++ b/board/xilinx/microblaze-generic/xparameters.h
@@ -21,8 +21,10 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  *
- * CAUTION: This file is automatically generated by libgen.
- * Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4
+ * CAUTION: This file is a faked configuration !!!
+ *          There is no real target for the microblaze-generic
+ *          configuration. You have to replace this file with
+ *          the generated file from your Xilinx design flow.
  */
 
 #define XILINX_BOARD_NAME	microblaze-generic
@@ -69,3 +71,9 @@
 
 /* Ethernet controller is Ethernet_MAC */
 #define XILINX_EMACLITE_BASEADDR       0x40C00000
+
+/* Ethernet controller is Ethernet_MAC */
+#define XILINX_LLTEMAC_BASEADDR			0x44000000
+#define XILINX_LLTEMAC_SDMA_CTRL_BASEADDR	0x42000180
+#define XILINX_LLTEMAC_BASEADDR1		0x44000040
+#define XILINX_LLTEMAC_SDMA_CTRL_BASEADDR1	0x42000200
-- 
1.7.0.4