[U-Boot] u-boot on beagleboard finds incorrect memory size.

[wilsonjonathan]

On Thu, 2012-01-26 at 10:08 -0700, Tom Rini wrote:
> On Wed, Jan 25, 2012 at 1:06 PM, wilsonjonathan
> <piercing_male at hotmail.com> wrote:
> > The u-boot loader is showing an incorrect size in the memory, and
> > passing the invalid information to the kernel.
> 
> What revision of the board do you have?  Is this a 'classic' rev C4?  Thanks.
> 

Using the denx u-boot, if it doesn't find u-boot.img it halts instead of
then testing for u-boot.bin... so I put u-boot.img onto the mmc and the
following came up.


> U-Boot SPL 2011.12-00201-g137703b (Jan 26 2012 - 19:15:07)
> Texas Instruments Revision detection unimplemented
> OMAP SD/MMC: 0
> reading u-boot.img
> reading u-boot.img
> 
> 
> U-Boot 2011.12-00201-g137703b (Jan 26 2012 - 19:15:07)
> 
> OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 mHz
> OMAP3 Beagle board + LPDDR/NAND
> I2C:   ready
> DRAM:  1 GiB
> NAND:  256 MiB
> MMC:   OMAP SD/MMC: 0
> *** Warning - bad CRC, using default environment
> 
> In:    serial
> Out:   serial
> Err:   serial
> Beagle Rev C4
> timed out in wait_for_pin: I2C_STAT=0
> I2C read: I/O error
> Unrecognized expansion board: 0
> Die ID #5468002400000000040365fa12014003
> Net:   Net Initialization Skipped
> No ethernet found.
> Hit any key to stop autoboot:  0 
> OMAP3 beagleboard.org #